Biosorption mechanisms of cationic and anionic dyes in a low-cost residue from brewer's spent grain.

The brewer's spent grain (BSG) is a byproduct of the brewing industry produced in large quantities and with few ecological disposal options. The use of this low-cost residue was investigated for the removal of methylene blue (MB) and tartrazine yellow (TY) dyes. The BSG has been extensively characterized to obtain its physicochemical characteristics. Batch experiments were conducted to investigate the effects of biosorption parameters: initial pH, kinetics, equilibrium isotherms and adsorption thermodynamics. The characterization showed high carbon content and heterogeneous morphology with the presence of meso and macropores. The best experimental conditions were obtained as pH 11 for MB and pH 2 for TY. Kinetics resulted in an equilibrium time of 240 min for MB and 300 min for TY and was best represented by the pseudo-second order model. Different interaction mechanisms were suggested, such as electrostatic interactions, electron donors and electron acceptors, hydrogen bonds, π-π dispersion interactions and the dye molecules aggregation. Equilibrium data were better represented by Langmuir isotherm. The maximum adsorbed amount of MB and TY was 284.75 and 26.18 mg/g, respectively, in each better experimental condition. Through the thermodynamic analysis, it was observed that the adsorption of the dyes was spontaneous and favourable. MB is preferentially retained through chemisorption, whereas TY followed a physical process. Considering the characteristics and results found compared to the recent literature, it was verified that BSG can be used as an effective and innovative biosorbent for removal purposes of dyeing effluent.

Chitosan, alginate and other macromolecules as activated carbon immobilizing agents: A review on composite adsorbents for the removal of water contaminants.

Activated carbon (AC) is widely used in water treatment, however, it has some technical disadvantages, such as its high cost and difficulty to recover. To overcome these drawbacks, AC particles have been encapsulated within a polymeric support, mainly chitosan and alginate-based. The use of these biological macromolecules results in composites with lower-cost, superior mechanical properties, and higher number of functional groups, advantages that have been attracted the attention of the scientific community. However, the number of publications is relatively low, demonstrating an important research gap yet to be investigated. Thus, this paper aims to review the recent studies concerning the use of chitosan, alginate and other macromolecules as AC immobilizing agents, describing the synthesis methods, characterization analyses and adsorption studies, focusing on the main advantages, disadvantages, gaps and future perspectives. Throughout the review it was verified that the composites were able to remove several water contaminants, mainly dyes and heavy metals, with high efficiency. Synergistic effects were detected, indicating the role of both polymers and AC, which increased the spectrum of contaminants capable of being adsorbed. Finally, it was observed a gap in column experiments, suggesting that future studies are essential to elucidate the applications in the industrial perspective.

Activated hydrochar produced from brewer's spent grain and its application in the removal of acetaminophen.

Acetaminophen has shown a gradual increase in detection in surface waters. Although present in low concentrations, it should be removed to prevent deleterious effects. Thus, adsorption onto activated carbon is emphasized. Adsorbents may be produced by hydrothermal carbonization (HTC), an environmental-friendly process. Therefore, this work aimed to investigate the use of HTC, verifying its application in acetaminophen removal. Brewer's spent grain (BSG), its hydrochar (HC-BSG) and its activated hydrochar (AHC-BSG) were characterized. HTC provided material with high carbon content. Lignocellulosic breakdown has been demonstrated in HC-BSG and AHC-BSG, but in the latter it was more intense as a result of activation with KOH. Also, a high surface area was found in AHC-BSG (1512.83 m2 g-1), resulting in an adsorption of 318.00 mg g-1. The pseudo-second-order and Langmuir models were fitted to the experimental data. Therefore, HTC was effective as a pretreatment for AHC-BSG, resulting in significant acetaminophen removals.

Evaluation of pre-induction temperature, cell growth at induction and IPTG concentration on the expression of a leptospiral protein in E. coli using shaking flasks and microbioreactor.

BACKGROUND: Leptospirosis is a zoonose that is increasingly endemic in built-up areas, especially where there are communities living in precarious housing with poor or non-existent sanitation infrastructure. Leptospirosis can kill, for its symptoms are easily confused with those of other diseases. As such, a rapid diagnosis is required so it can be treated effectively. A test for leptospirosis diagnosis using Leptospira Immunoglobulin-like (Lig) proteins is currently at final validation at Fiocruz. RESULTS: In this work, the process for expression of LigB (131-645aa) in E. coli BL21 (DE3)Star™/pAE was evaluated. No significant difference was found for the experiments at two different pre-induction temperatures (28 °C and 37 °C). Then, the strain was cultivated at 37 °C until IPTG addition, followed by induction at 28°C, thereby reducing the overall process time. Under this condition, expression was assessed using central composite design for two variables: cell growth at which LigB (131-645aa) was induced (absorbance at 600 nm between 0.75 and 2.0) and inducer concentration (0.1 mM to 1 mM IPTG). Both variables influenced cell growth and protein expression. Induction at the final exponential growth phase in shaking flasks with Abs(ind) = 2.0 yielded higher cell concentrations and LigB (131-645aa) productivities. IPTG concentration had a negative effect and could be ten-fold lower than the concentration commonly used in molecular biology (1 mM), while keeping expression at similar levels and inducing less damage to cell growth. The expression of LigB (131-645aa) was associated with cell growth. The induction at the end of the exponential phase using 0.1 mM IPTG at 28 °C for 4 h was also performed in microbioreactors, reaching higher cell densities and 970 mg/L protein. LigB (131-645aa) was purified by nickel affinity chromatography with 91% homogeneity. CONCLUSIONS: It was possible to assess the effects and interactions of the induction variables on the expression of soluble LigB (131-645aa) using experimental design, with a view to improving process productivity and reducing the production costs of a rapid test for leptospirosis diagnosis.

Xeno-free production of human embryonic stem cells in stirred microcarrier systems using a novel animal/human-component-free medium.

Currently, stem cell research faces a major bottleneck related to the low efficiency of methods to produce large quantities of human embryonic stem cells (ESC) for use in clinical trials. Most culture media currently employed for human ESC cultivation contain animal compounds, and cells are grown in static flasks. Besides the immediate contamination with nonhuman compounds, cell expansion in flasks tends to be laborious and nonefficient. Here we cultured human ESC in stirred microcarrier (MC) systems using an animal/human-component-free medium, to overcome both issues. The method developed to culture cells on suspended beads combined the use of polymeric MCs in stirred vessels with an optimized culture medium free of supplements of animal and human origin. This approach generated approximately 160 million cells within 6 days, which were shown to remain pluripotent. The process developed herein provides a step forward toward therapy due to the economic advantages in the production of human ESC and to their consequent low immunogenic potential.