Oligonucleotide Formulations Prepared by High-Speed Electrospinning: Maximizing Loading and Exploring Downstream Processability.

The aim of this study was to develop antisense oligonucleotide tablet formulations using high-speed electrospinning. Hydroxypropyl-beta-cyclodextrin (HPßCD) was used as a stabilizer and as an electrospinning matrix. In order to optimize the morphology of the fibers, electrospinning of various formulations was carried out using water, methanol/water (1:1), and methanol as solvents. The results showed that using methanol could be advantageous due to the lower viscosity threshold for fiber formation enabling higher potential drug loadings by using less excipient. To increase the productivity of electrospinning, high-speed electrospinning technology was utilized and HPßCD fibers containing 9.1% antisense oligonucleotide were prepared at a rate of ~330 g/h. Furthermore, to increase the drug content of the fibers, a formulation with a 50% drug loading was developed. The fibers had excellent grindability but poor flowability. The ground fibrous powder was mixed with excipients to improve its flowability, which enabled the automatic tableting of the mixture by direct compression. The fibrous HPßCD-antisense oligonucleotide formulations showed no sign of physical or chemical degradation over the 1-year stability study, which also shows the suitability of the HPßCD matrix for the formulation of biopharmaceuticals. The obtained results demonstrate possible solutions for the challenges of electrospinning such as scale-up and downstream processing of the fibers.

Enabling technologies driving drug research and development.

One of the strategic goals of the European Medicines Agency (EMA) and the European Medicines Regulatory Network is to support the research and uptake of innovative methods and technologies in the development of medicines. To promote this goal, EMA drew up a list of enabling technologies (ETs), which are novel and fast-growing technologies that have the potential to enable innovation and therefore exert considerable impact on drug development. In this work, enabling technologies identified by the EMA are analysed to measure their impact on drug development by following their journey from publications through early regulatory interactions to clinical trials between 2019 and 2022. This work also reviews the current list of EMA-identified ETs by scrutinising previously unseen innovative technologies identified in EMA submissions data. The analysis shows large variations in the appearance of the various innovative technologies in the different studied data sources, which provided valuable insights into the "Journey of Innovation" that innovative technologies undergo. Several emerging technologies were identified and endorsed for inclusion in the enabling technologies list, whereas some others already on the list were proposed to be excluded due to their low appearance in regulatory interactions as well as clinical trials and publications. Overall, this analysis highlights the relevance and value of continuously scanning and monitoring enabling technologies, supporting Europe's goal to remain a leader in research and development of innovative technologies, methods, and methodologies relevant to drug development.

Development of fast-dissolving dosage forms of curcuminoids by electrospinning for potential tumor therapy application.

Curcuminoids (CUs) of antitumor and various other potential biological activities have extremely low water solubility therefore special formulation was elaborated. New fast dissolving reconstitution dosage forms of four CUs were prepared as fibrous form of 2-hydroxypropyl-ß-cyclodextin (HP-ß-CD). In the electrospinning process HP-ß-CD could act both as solubilizer and fiber-forming agent. The solubilization efficiency of the CU-HP-ß-CD systems was determined with phase-solubility measurements. The electrospun CUs were amorphous and uniformly distributed in the fibers according to XRD analysis and Raman mappings. The fibrous final products had fast (<5 min) and complete dissolution. In typical iv. infusion reconstitution volume (20 mL) fibers containing 40-80 mg of CU could be dissolved, which is similar to the currently proposed dose (<120 mg/m2). The in vitro cytostatic effect data showed that the antitumor activity of the CU-HP-ß-CD complexes was similar or better compared to the free APIs.

Powder filling of electrospun material in vials: A proof-of-concept study.

The present paper reports the powder filling of milled electrospun materials in vials, which contained voriconazole and sulfobutylether-ß-cyclodextrin. High-speed electrospinning was used for the production of the fibrous sample, which was divided into 6 parts. Each portion was milled using different milling methods and sizes of sieves to investigate whether the milling influences the powder and filling properties. Bulk and tapped density tests, laser diffraction and angle of repose measurements were applied to characterize the milled powders, while a vibratory feeder was used for the feeding experiments. The correlation between the material property descriptors and the feeding responses was investigated by multivariate data analysis. Based on the results, three samples were chosen for the vial filling, which was accomplished with 3400 mg electrospun material containing 200 mg voriconazole, representative of the commercial product. The feed rate was set to fit the 240 g/h production rate of the electrospinning and the relative standard deviation of three repeated vial filling was determined to see the accuracy of the process. This research shows that by applying a suitable milling method it is possible to process electrospun fibers to a powder, which can be filled into vials and used as reconstitution dosage forms.

Sulfobutylether-beta-cyclodextrin-enabled antiviral remdesivir: Characterization of electrospun- and lyophilized formulations.

Veklury™ by Gilead Sciences, Inc., containing antiviral drug, remdesivir (REM) has received emergency authorization in the USA and in Europe for COVID-19 therapy. Here, for the first time, we describe details of the non-covalent, host-guest type interaction between REM and the solubilizing excipient, sulfobutylether-beta-cyclodextrin (SBECD) that results in significant solubility enhancement. Complete amorphousness of the cyclodextrin-enabled REM formulation was demonstrated by X-ray diffraction, thermal analysis, Raman chemical mapping and electron microscopy/energy dispersive spectroscopy. The use of solubilizing carbohydrate resulted in a 300-fold improvement of the aqueous solubility of REM, and enhanced dissolution rate of the drug enabling the preparation of stable infusion solutions for therapy. 2D ROESY NMR spectroscopy provided information on the nature of REM-excipient interaction and indicated the presence of inclusion phenomenon and the electrostatic attraction between anionic SBECD and nitrogen-containing REM in aqueous solution.

Continuous blending monitored and feedback controlled by machine vision-based PAT tool.

In a continuous powder blending process machine vision is utilized as a Process Analytical Technology (PAT) tool. While near-infrared (NIR) and Raman spectroscopy are reliable methods in this field, measurements become challenging when concentrations below 2 w/w% are quantified. However, an active pharmaceutical ingredient (API) with an intense color might be quantified in even lower quantities by images recorded with a digital camera. Riboflavin (RI) was used as a model API with orange color, its Limit of Detection was found to be 0.015 w/w% and the Limit of Quantification was 0.046 w/w% using a calibration based on the pixel value of images. A calibration for in-line measurement of RI concentration was prepared in the range of 0.2-0.45 w/w%, validation with UV/VIS spectrometry showed great accuracy with a relative error of 2.53 %. The developed method was then utilized for a residence time distribution (RTD) measurement in order to characterize the dynamics of the blending process. Lastly, the technique was applied in real-time feedback control of a continuous powder blending process. Machine vision based direct or indirect API concentration determination is a promising and fast method with a great potential for monitoring and control of continuous pharmaceutical processes.

Comparison of Amorphous Solid Dispersions of Spironolactone Prepared by Spray Drying and Electrospinning: The Influence of the Preparation Method on the Dissolution Properties.

This research aimed to compare two solvent-based methods for the preparation of amorphous solid dispersions (ASDs) made up of poorly soluble spironolactone and poly(vinylpyrrolidone-co-vinyl acetate). The same apparatus was used to produce, in continuous mode, drug-loaded electrospun (ES) and spray-dried (SD) materials from dichloromethane and ethanol-containing solutions. The main differences between the two preparation methods were the concentration of the solution and application of high voltage. During electrospinning, a solution with a higher concentration and high voltage was used to form a fibrous product. In contrast, a dilute solution and no electrostatic force were applied during spray drying. Both ASD products showed an amorphous structure according to differential scanning calorimetry and X-ray powder diffraction results. However, the dissolution of the SD sample was not complete, while the ES sample exhibited close to 100% dissolution. The polarized microscopy images and Raman microscopy mapping of the samples highlighted that the SD particles contained crystalline traces, which can initiate precipitation during dissolution. Investigation of the dissolution media with a borescope made the precipitated particles visible while Raman spectroscopy measurements confirmed the appearance of the crystalline active pharmaceutical ingredient. To explain the micro-morphological differences, the shape and size of the prepared samples, the evaporation rate of residual solvents, and the influence of the electrostatic field during the preparation of ASDs had to be considered. This study demonstrated that the investigated factors have a great influence on the dissolution of the ASDs. Consequently, it is worth focusing on the selection of the appropriate ASD preparation method to avoid the deterioration of dissolution properties due to the presence of crystalline traces.

Monoclonal antibody formulation manufactured by high-speed electrospinning.

Solid formulations of monoclonal antibodies present several advantages, such as improved stability and increased shelf-life as well as simpler storage and transportation. In this study, we present a gentle drying technology for monoclonal antibodies, applying the water soluble 2-hydroxypropyl-ß-cyclodextrin (HP-ß-CD) as matrix, to prepare a solid reconstitution dosage form. High-speed electrospinning of an aqueous infliximab-containing HP-ß-CD solution was carried out at 25 °C resulting in fibers with an average diameter of 2.5 µm. The mAb-loaded electrospun fibers were successful to preserve the stability of infliximab in solid form. The results of size exclusion chromatography and gel electrophoresis indicated no significant increase in aggregate formation during the electrospinning process compared to the initial matrix solution. The binding activity of infliximab was preserved during electrospinning compared to the reference liquid formulation. Due to the enhanced surface area, excellent reconstitution capability, i.e. clear solution within 2 min without any vigorous mixing, could be achieved in a small-scale reconstitution test. The results of this work demonstrate that high-speed electrospinning is a very promising technique to manufacture the solid formulation of monoclonal antibodies for applications such as fast reconstitutable powders.

Electrospun Solid Formulation of Anaerobic Gut Microbiome Bacteria.

A model anaerobic bacterium strain from the gut microbiome (Clostridium butyricum) producing anti-inflammatory molecules was incorporated into polymer-free fibers of a water-soluble cyclodextrin matrix (HP-ß-CD) using a promising scaled-up nanotechnology, high-speed electrospinning. A long-term stability study was also carried out on the bacteria in the fibers. Effect of storage conditions (temperature, presence of oxygen) and growth conditions on the bacterial viability in the fibers was investigated. The viability of the sporulated anaerobic bacteria in the fibers was maintained during 12 months of room temperature storage in the presence of oxygen. Direct compression was used to prepare tablets from the produced bacteria-containing fibers after milling (using an oscillating mill) and mixing with tableting excipients, making easy oral administration of the bacteria possible. No significant decrease was observed in bacterial viability following the processing of the fibers (milling and tableting).

Raman-based dynamic feeding strategies using real-time glucose concentration monitoring system during adalimumab producing CHO cell cultivation.

The use of Process Analytical Technology tools coupled with chemometrics has been shown great potential for better understanding and control of mammalian cell cultivations through real-time process monitoring. In-line Raman spectroscopy was utilized to determine the glucose concentration of the complex bioreactor culture medium ensuring real-time information for our process control system. This work demonstrates a simple and fast method to achieve a robust partial least squares calibration model under laboratory conditions in an early phase of the development utilizing shake flask and bioreactor cultures. Two types of dynamic feeding strategies were accomplished where the multi-component feed medium additions were controlled manually and automatically based on the Raman monitored glucose concentration. The impact of these dynamic feedings was also investigated and compared to the traditional bolus feeding strategy on cellular metabolism, cell growth, productivity, and binding activity of the antibody product. Both manual and automated dynamic feeding strategies were successfully applied to maintain the glucose concentration within a narrower and lower concentration range. Thus, besides glucose, the glutamate was also limited at low level leading to reduced production of inhibitory metabolites, such as lactate and ammonia. Consequently, these feeding control strategies enabled to provide beneficial cultivation environment for the cells. In both experiments, higher cell growth and prolonged viable cell cultivation were achieved which in turn led to increased antibody product concentration compared to the reference bolus feeding cultivation.

A solid doxycycline HP-ß-CD formulation for reconstitution (i.v. bolus) prepared by scaled-up electrospinning.

In this study a new intravenous (i.v.) bolus dosage form of doxycycline was prepared by electrospinning. A tetracycline-type antibiotic with low water solubility (doxycycline (DOX)) was used with 2-hydroxypropyl-ß-cyclodextrin (HP-ß-CD) as solubilizer. The new solid formulation could be produced with high (~80 g/h) productivity rate using high-speed electrospinning (HSES) from a water-based precursor solution. Freeze-dried DOX-HP-ß-CD was also prepared from the same precursor solution as HSES for comparison. Raman mapping showed that the amorphous DOX was uniformly distributed in the fibrous powder making precise dosing of the API possible. The new formulation's viability as an i.v. bolus product was examined with reconstitution test. The samples contained 100 mg of pure DOX (similarly to the products currently on the market). To ensure i.v. bolus applicability, the dissolution was carried out in 1.5 mL water. The final DOX concentration was 66.7 mg/(mL solvent), which is 7 times higher than the currently marketed formulation. The drug release was followed by UV-VIS spectrophotometry. The results confirmed that the reconstitution solution could be applied as an i.v. bolus dosage form. Moreover, the work confirmed that the continuous high-speed electrospinning process can be a viable high productivity alternative to freeze-drying.

Continuous drying of a protein-type drug using scaled-up fiber formation with HP-ß-CD matrix resulting in a directly compressible powder for tableting.

The goals of this work were to evaluate if high-speed electrospinning can be used as a gentle and continuous drying technology to produce protein-containing cyclodextrin-based fibers from an aqueous solution and to convert the produced protein-cyclodextrin fibers into a directly compressible powder. A 400 mL/h feeding rate was used during the electrospinning experiments, corresponding to a ~270 g/h production rate of the dried material. The produced fibers were collected in a cyclone. The fibers were found grindable without secondary drying, and the ground powder was mixed with tableting excipients and was successfully tableted by direct compression. The model protein-type drug (ß-galactosidase) remained stable during each of the processing steps (electrospinning, grinding, tableting) and after 6 months of storage at room temperature in the tablets. The obtained results demonstrate that high speed electrospinning can be a gentle alternative to traditional drying methods used for protein-type drugs, and that tablet formulation is achievable from the electrospun material prepared this way.

Scale-up of electrospinning technology: Applications in the pharmaceutical industry.

Recently, electrospinning (ES) of fibers has been shown to be an attractive strategy for drug delivery. One of the main features of ES is that a wide variety of drugs can be loaded into the fibers to improve their bioavailability, to enhance dissolution, or to achieve controlled release. Besides, ES is a continuous technology with low energy consumption, which can make it a very economic production alternative to the widely used freeze drying and spray drying. However, the low production rate of laboratory-scaled ES has limited the industrial application of the technology so far. This article covers the various ES technologies developed for scaled-up fiber production with an emphasis on pharmaceutically relevant examples. The methods used for increasing the productivity are complied, which is followed by a review of specific examples from literature where these technologies are utilized to produce oral drug delivery systems. The different technologies are compared in terms of their basic principles, advantages, and limitations. Finally, the different downstream processing options to prepare tablets or capsules containing the electrospun drug are covered as well. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Continuous Formulation Approaches of Amorphous Solid Dispersions: Significance of Powder Flow Properties and Feeding Performance.

Preparation and formulation of amorphous solid dispersions (ASDs) are becoming more and more popular in the pharmaceutical field because the dissolution of poorly water-soluble drugs can be effectively improved this way, which can lead to increased bioavailability in many cases. During downstream processing of ASDs, technologists need to keep in mind both traditional challenges and the newest trends. In the last decade, the pharmaceutical industry began to display considerable interest in continuous processing, which can be explained with their potential advantages such as smaller footprint, easier scale-up, and more consistent product, better quality and quality assurance. Continuous downstream processing of drug-loaded ASDs opens new ways for automatic operation. Therefore, the formulation of poorly water-soluble drugs may be more effective and safe. However, developments can be challenging due to the poor flowability and feeding properties of ASDs. Consequently, this review pays special attention to these characteristics since the feeding of the components greatly influences the content uniformity in the final dosage form. The main purpose of this paper is to summarize the most important steps of the possible ASD-based continuous downstream processes in order to give a clear overview of current course lines and future perspectives.

Scaled-Up Production and Tableting of Grindable Electrospun Fibers Containing a Protein-Type Drug.

The aims of this work were to develop a processable, electrospun formulation of a model biopharmaceutical drug, ß-galactosidase, and to demonstrate that higher production rates of biopharmaceutical-containing fibers can be achieved by using high-speed electrospinning compared to traditional electrospinning techniques. An aqueous solution of 7.6 w/w% polyvinyl alcohol, 0.6 w/w% polyethylene oxide, 9.9 w/w% mannitol, and 5.4 w/w% ß-galactosidase was successfully electrospun with a 30 mL/h feeding rate, which is about 30 times higher than the feeding rate usually attained with single-needle electrospinning. According to X-ray diffraction measurements, polyvinyl alcohol, polyethylene oxide, and ß-galactosidase were in an amorphous state in the fibers, whereas mannitol was crystalline (δ-polymorph). The presence of crystalline mannitol and the low water content enabled appropriate grinding of the fibrous sample without secondary drying. The ground powder was mixed with excipients commonly used during the preparation of pharmaceutical tablets and was successfully compressed into tablets. ß-galactosidase remained stable during each of the processing steps (electrospinning, grinding, and tableting) and after one year of storage at room temperature in the tablets. The obtained results demonstrate that high-speed electrospinning is a viable alternative to traditional biopharmaceutical drying methods, especially for heat sensitive molecules, and tablet formulation is achievable from the electrospun material prepared this way.

Inline noninvasive Raman monitoring and feedback control of glucose concentration during ethanol fermentation.

Raman spectroscopy as a process analytical technology tool was implemented for the monitoring and control of ethanol fermentation carried out with Saccharomyces cerevisiae. The need for the optimization of bioprocesses such as ethanol production, to increase product yield, enhanced the development of control strategies. The control system developed by the authors utilized noninvasive Raman measurements to avoid possible sterilization problems. Real-time data analysis was applied using partial least squares regression (PLS) method. With the aid of spectral pretreatment and multivariate data analysis, the monitoring of glucose and ethanol concentration was successful during yeast fermentation with the prediction error of 4.42 g/L for glucose and 2.40 g/L for ethanol. By Raman spectroscopy-based feedback control, the glucose concentration was maintained at 100 g/L by the automatic feeding of concentrated glucose solution. The control of glucose concentration during fed-batch fermentation resulted in increased ethanol production. Ethanol yield of 86% was achieved compared to the batch fermentation when 75% yield was obtained. The results show that the use of Raman spectroscopy for the monitoring and control of yeast fermentation is a promising way to enhance process understanding and achieve consistently high production yield.

Continuous alternative to freeze drying: Manufacturing of cyclodextrin-based reconstitution powder from aqueous solution using scaled-up electrospinning.

The aims of this study were to evaluate electrospinning as a continuous alternative to freeze drying in the production of a reconstitution injection dosage form, and to prove that aqueous electrospinning can be realized with a high production rate at room temperature. High-speed electrospinning with a novel continuous cyclone collection was used to manufacture a formulation of the poorly water-soluble antifungal voriconazole (VOR) with sulfobutylether-ß-cyclodextrin (SBE-ß-CD). The freeze-dried, marketed product of this drug substance, Vfend® also contains SBE-ß-CD as excipient. SBE-ß-CD acted as a 'quasi-polymer', and it could be electrospun despite its low molecular mass (2163 Da). According to X-ray diffraction and differential scanning calorimetry, no traces of crystalline VOR were detectable in the fibers. Furthermore, Raman mapping and energy dispersive spectroscopy measurements showed a uniform distribution of amorphous VOR in the fibers. Reconstitution tests carried out with ground fibrous powder showed complete dissolution resulting in a clear solution after 30 s (similarly to Vfend®). The high productivity rate (~240 g/h) achieved using high-speed electrospinning makes this scaled-up, continuous and flexible manufacturing process capable of fulfilling the technological and capacity requirements of the pharmaceutical industry. This work shows that aqueous high-speed electrospinning, being a continuous and high-throughput process, is an economically viable production alternative to freeze drying.

Drying technology strategies for colon-targeted oral delivery of biopharmaceuticals.

In chronic intestinal diseases like inflammatory bowel disease, parenteral administration of biopharmaceuticals is associated with numerous disadvantages including immune reactions, infections, low patient compliance, and toxicity caused by high systemic bioavailability. One alternative that can potentially overcome these limitations is oral administration of biopharmaceuticals, where the local delivery will reduce the systemic exposure and furthermore the manufacturing costs will be lower. However, the development of oral dosage forms that deliver the biologically active form to the intestines is one of the greatest challenges for pharmaceutical technologists due to the sensitive nature of biopharmaceuticals. The present article discusses the various drug delivery technologies used to produce orally administered solid dosage forms of biopharmaceuticals with an emphasis on colon-targeted delivery. Solid oral dosage compositions containing different types of colon-targeting biopharmaceuticals are compiled followed by a review of currently applied and emerging drying technologies for biopharmaceuticals. The different drying technologies are compared in terms of their advantages, limitations, costs and their effect on product stability.

Raman Spectroscopy for Process Analytical Technologies of Pharmaceutical Secondary Manufacturing.

As the process analytical technology (PAT) mindset is progressively introduced and adopted by the pharmaceutical companies, there is an increasing demand for effective and versatile real-time analyzers to address the quality assurance challenges of drug manufacturing. In the last decades, Raman spectroscopy has emerged as one of the most promising tools for non-destructive and fast characterization of the pharmaceutical processes. This review summarizes the achieved results of the real-time application of Raman spectroscopy in the field of the secondary manufacturing of pharmaceutical solid dosage forms, covering the most common secondary process steps of a tablet production line. In addition, the feasibility of Raman spectroscopy for real-time control is critically reviewed, and challenges and possible approaches to moving from real-time monitoring to process analytically controlled technologies (PACT) are discussed.