Thermoresponsive oil-continuous gels based on double-interpenetrating colloidal-particle networks.

Gels composed of multicomponent building blocks offer promising opportunities for the development of novel soft materials with unique and useful structures. While interpenetrating polymer networks have been extensively studied and applied in the creation of these gels, equivalent strategies utilizing colloidal particles have received limited scientific and technological attention. This study presents a novel class of thermo-responsive apolar double gels from interpenetrating networks of attractive colloidal silica and lipid particles. These double gels are easily assembled and suitable for the fabrication of 3D-printed edible soft constructs. Emphasis is focused on the rheological properties and structure emerging on the dilute regime (ϕ ≲ 0.1). Rheological investigations demonstrate that double gels exhibit greater stiffness and resilience to yielding compared to their single lipid gel counterparts. The scaling behavior of the oscillatory linear shear moduli and the critical strain for yielding with volume fraction remain comparable between single and double gels. Creep yielding in double gels exhibits two exponential decay regimes, suggesting the presence of thicker gel strands undergoing flow. Visualization and quantification of the quiescent microstructure confirms the existence of such denser aggregates devoid of larger clusters due to steric hindrance of interpenetrating networks in double gels. This is in stark contrast to lipid single gels where aggregates grow unrestrictedly into larger clusters. Our study constitutes the first demonstration on the assembly of apolar double gel networks as a promising avenue for the design of novel soft materials and foods with tailored structure and mechanics.

Pickering stabilization mechanism revealed through direct imaging of particles with tuneable contact angle in a phase-separated binary solvent.

Pickering emulsions have attracted increasing attention from multiple fields, including food, cosmetics, healthcare, pharmaceutical, and agriculture. Their stability relies on the presence of colloidal particles instead of surfactant at the droplet interface, providing steric stabilization. Here, we demonstrate the microscopic attachment and detachment of particles with tunable contact angle at the interface underlying the Pickering emulsion stability. We vary the interfacial tension continuously by varying the temperature offset of a phase-separated binary liquid from its critical point, and employ confocal microscopy to directly observe the particles at the interface to determine their coverage and contact angle as a function of the varying interfacial tension. When the interfacial tension decreases upon approaching the binary liquid's critical point, the contact angle and detachment energy (ΔE) drop, and the particles move out of the interface. Microscopic imaging suggests necking and capillary interactions lead to clustering of the particles, before they eventually desorb from the interface. Macroscopic measurements show that concomitantly, coalescence takes place, and the emulsion loses its stability. These results reveal the interplay of interfacial energies, contact angle and surface coverage that underlies the Pickering emulsion stability, opening up ways to manipulate and design the stability through the microscopic behavior of the adsorbed particles.

Interactions of Natural Flavones with Iron Are Affected by 7-O-Glycosylation, but Not by Additional 6″-O-Acylation.

In iron-fortified bouillon, reactivity of the iron ion with (acylated) flavone glycosides from herbs can affect product color and bioavailability of iron. This study investigates the influence of 7-O-glycosylation and additional 6″-O-acetylation or 6″-O-malonylation of flavones on their interaction with iron. Nine (6″-O-acylated) flavone 7-O-apiosylglucosides were purified from celery (Apium graveolens), and their structures were elucidated by mass spectrometry (MS) and nuclear magnetic resonance (NMR). In the presence of iron, a bathochromic shift and darker color were observed for the 7-O-apiosylglucosides compared to the aglycon of flavones that only possess the 4-5 site. Thus, the ability of iron to coordinate to the flavone 4-5 site is increased by 7-O-glycosylation. For flavones with an additional 3'-4' site, less discoloration was observed for the 7-O-apiosylglucoside compared to the aglycon. Additional 6″-O-acylation did not affect the color. These findings indicate that model systems used to study discoloration in iron-fortified foods should also comprise (acylated) glycosides of flavonoids.

Is there a difference between surfactant-stabilised and Pickering emulsions?

What measurable physical properties allow one to distinguish surfactant-stabilised from Pickering emulsions? Whereas surfactants influence oil/water interfaces by lowering the oil/water interfacial tension, particles are assumed to have little effect on the interfacial tension. Here we perform interfacial tension (IFT) measurements on three different systems: (1) soybean oil and water with ethyl cellulose nanoparticles (ECNPs), (2) silicone oil and water with the globular protein bovine serum albumin (BSA), and (3) sodium dodecyl sulfate (SDS) solutions and air. The first two systems contain particles, while the third system contains surfactant molecules. We observe a significant decrease in interfacial tension with increasing particle/molecule concentration in all three systems. We analyse the surface tension data using the Gibbs adsorption isotherm and the Langmuir equation of state for the surface, resulting in surprisingly high adsorption densities for the particle-based systems. These seem to behave very much like the surfactant system: the decrease in tension is due to the presence of many particles at the interface, each with an adsorption energy of a few kBT. Dynamic interfacial tension measurements show that the systems are in equilibrium, and that the characteristic time scale for adsorption is much longer for particle-based systems than for surfactants, in line with their size difference. In addition, the particle-based emulsion is shown to be less stable against coalescence than the surfactant-stabilised emulsion. This leaves us with the conclusion that we are not able to make a clear distinction between the surfactant-stabilised and Pickering emulsions.

Reactivity of Fe(III)-containing pyrophosphate salts with phenolics: complexation, oxidation, and surface interaction.

Mixed pyrophosphate salts with the general formula Ca2(1-x)Fe4x(P2O7)(1+2x) potentially possess less iron-phenolic reactivity compared to ferric pyrophosphate (FePP), due to decreased soluble Fe in the food-relevant pH range 3-7. We investigated reactivity (i.e., complexation, oxidation, and surface interaction) of FePP and mixed salts (with x = 0.14, 0.15, 0.18, and 0.35) in presence of structurally diverse phenolics. At pH 5-7, increased soluble iron from all salts was observed in presence of water-soluble phenolics. XPS confirmed that water-soluble phenolics solubilize iron after coordination at the salt surface, resulting in increased discoloration. However, color changes for mixed salts with x ≤ 0.18 remained acceptable for slightly water-soluble and insoluble phenolics. Furthermore, phenolic oxidation in presence of mixed salts was significantly reduced compared to FePP at pH 6. In conclusion, these mixed Ca-Fe(III) pyrophosphate salts with x ≤ 0.18 can potentially be used in designing iron-fortified foods containing slightly water-soluble and/or insoluble phenolics.

NaCl Crystals as Carriers for Micronutrient Delivery.

Iron deficiency leading to anemia is one of the most severe and important nutritional deficiencies in the world today. To combat this deficiency, the fortification of food products with iron is a natural way to increase the global iron uptake. Here, we report a novel strategy for iron encapsulation in NaCl crystals via microscopic inclusions containing dissolved iron salt. The liquid inclusions embedded in the crystal insulate the reactive iron salts from their environment while assuring that iron is in a soluble and bioavailable form. While the size distribution of inclusions remains independent of the evaporation conditions, their density increases during crystallization at lower relative humidity. Using Raman confocal microspectroscopy, we have been able to analyze the morphology, length/thickness ratio, of inclusions and show that inclusions evolve toward a plate-like structure with the increase in size. By growing a pure NaCl shell around the iron-containing NaCl crystals, the stability of the composite crystals can be even further enhanced. The role of halite crystals as a carrier for iron fortification opens the way for the delivery of other types of micronutrients by including them in table salt.

Edible mechanical metamaterials with designed fracture for mouthfeel control.

Metamaterials can display unusual and superior properties that come from their carefully designed structure rather than their composition. Metamaterials have permeated large swatches of science, including electromagnetics and mechanics. Although metamaterials hold the promise for realizing technological advances, their potential to enhance interactions between humans and materials has largely remained unexplored. Here, we devise a class edible mechanical metamaterials with tailored fracture properties to control mouthfeel sensory experience. Using chocolate as a model material, we first demonstrate how to create and control the fracture anisotropy, and the number of cracks, and demonstrate that these properties are captured in mouthfeel experience. We further use topology optimization to rationally design edible metamaterials with maximally anisotropic fracture strength. Our work opens avenues for the use of metamaterials to control fracture and to enhance human-matter interactions.

Unravelling discolouration caused by iron-flavonoid interactions: Complexation, oxidation, and formation of networks.

Iron-flavonoid interactions in iron-fortified foods lead to undesirable discolouration. This study aimed to investigate iron-mediated complexation, oxidation, and resulting discolouration of flavonoids by spectrophotometric and mass spectrometric techniques. At pH 6.5, iron complexation to the 3-4 or 4-5 site instantly resulted in bathochromic shifting of the π â†’ π* transition bands, and complexation to the 3'-4' site (i.e. catechol moiety) induced a π â†’ dπ transition band. Over time, iron-mediated oxidative degradation and coupling reactions led to the formation of hydroxybenzoic acid derivatives and dehydrodimers, respectively resulting in a decrease or increase in discolouration. Additionally, we employed XRD, SEM, and TEM to reveal the formation of insoluble black metal-phenolic networks (MPNs). This integrated study on iron-mediated complexation and oxidation of flavonoids showed that the presence of the C2-C3 double bond in combination with the catechol moiety and either the 4-carbonyl or 3-hydroxyl increased the intensity of discolouration, extent of oxidation, and formation of MPNs.

Water reorientation dynamics in colloidal water-oil emulsions.

We study the molecular-scale properties of colloidal water-oil emulsions consisting of 120-290 nm oil droplets embedded in water. This type of emulsion can be prepared with low concentrations of surfactants and is usually kinetically stable. Even though colloidal water-oil emulsions are used ubiquitously, their molecular properties are still poorly understood. Here we study the orientational dynamics of water molecules in these emulsions using polarization resolved pump-probe infrared spectroscopy, for varying surfactant concentrations, droplet sizes, and temperatures. We find that the majority of the water molecules reorients with the same time constant as in bulk water, while a small fraction of the water molecules reorients on a much longer time scale. These slowly reorienting water molecules are interacting with the surface of the oil droplets. The fraction of slowly orienting water molecules is proportional to the oil volume fraction, and shows a negligible dependence on the average droplet size. This finding indicates that the total surface area of the oil droplets is quite independent of the average droplet size, which indicates that the larger oil droplets are quite corrugated, showing large protrusions into the water phase.

Predicting thickness perception of liquid food products from their non-Newtonian rheology.

The "mouthfeel" of food products is a key factor in our perception of food quality and in our appreciation of food products. Extensive research has been performed on what determines mouthfeel, and how it can be linked to laboratory measurements and eventually predicted. This was mainly done on the basis of simple models that do not accurately take the rheology of the food products into account. Here, we show that the subjectively perceived "thickness" of liquid foods, or the force needed to make the sample flow or deform in the mouth, can be directly related to their non-Newtonian rheology. Measuring the shear-thinning rheology and modeling the squeeze flow between the tongue and the palate in the oral cavity allows to predict how a panel perceives soup "thickness". This is done for various liquid bouillons with viscosities ranging from that of water to low-viscous soups and for high-viscous xanthan gum solutions. Our findings show that our tongues, just like our eyes and ears, are logarithmic measuring instruments in agreement with the Weber-Fechner law that predicts a logarithmic relation between stimulus amplitude and perceived strength. Our results pave the way for more accurate prediction of mouthfeel characteristics of liquid food products.

Stringiness of hyaluronic acid emulsions.

OBJECTIVE: Cosmetic emulsions containing hyaluronic acid are ubiquitous in the cosmetic industry. However, the addition of (different molecular weight) hyaluronic acid can affect the filament stretching properties of concentrated emulsions. This property is often related to the "stringiness" of an emulsion, which can affect the consumer's choice for a product. It is thus very important to investigate and predict the effect of hyaluronic acid on the filament stretching properties of cosmetic emulsions. METHODS: Model emulsions and emulsions with low and high molecular weights are prepared and their filament stretching properties are studied by the use of an extensional rheometer. Two different stretching speeds are employed during the stretching of the emulsions, a low speed at 10 µm/s and a high speed at 10 mm/s. The shear rheology of the samples is measured by rotational rheology. RESULTS: We find that filament formation only occurs at high stretching speeds when the emulsion contains high molecular weight hyaluronic acid. The formation of this filament, which happens at intermediate states of the break-up, coincides with an exponential decay in the break-up dynamics. The beginning and end of the break-up of high molecular weight hyaluronic acid emulsions show a power law behaviour, where the exponent depends on the initial stretching rate. At a lower stretching speed, no filament is observed for both high molecular weight and low molecular weight hyaluronic acid emulsions and the model emulsion. The emulsions show a power law behaviour over the whole break-up range, where the exponent also depends on the stretching rate. No significant difference is observed between the shear flow properties of the emulsions containing different molecular weights hyaluronic acid. CONCLUSION: In this work, we underline the importance of the molecular weight of hyaluronic acid on the elongational properties of concentrated emulsions. The filament formation properties, for example the stringiness, of an emulsion is a key determinant of a product liking and repeat purchase. Here, we find that high molecular weight hyaluronic acid and a high stretching speed are the control parameters affecting the filament formation of an emulsion.

OBJECTIF: Les émulsions contenant de l'acide hyaluronique sont omniprésentes dans l'industrie cosmétique. En particulier, l'ajout d'acide hyaluronique (de poids moléculaires différents) peut affecter les propriétés extensionnelles d'un filament d'émulsion concentrée. Cette propriété importante est souvent assimilée à la perception organo-sensorielle "filante/cohésive" d'une émulsion et peut influer sur le choix final du consommateur pour un produit. Il est donc important d'étudier, mais aussi de pouvoir prédire, l'effet de l'acide hyaluronique sur les propriétés d'étirement de filaments d'émulsions cosmétiques. MÉTHODES: Nous avons préparé des émulsions modèles à faible et grands poids moléculaires et étudié leurs propriétés extensionnelles à l'aide d'un rhéomètre extensionnel. Deux vitesses d'étirement différentes sont utilisées, une vitesse faible à 10 µm/s et une vitesse élevée à 10 mm/s. La rhéologie de cisaillement des échantillons est mesurée par rhéologie rotationnelle. RÉSULTATS: Nous constatons que la formation de filaments ne se produit que pour des vitesses d'étirement élevées et lorsque l'émulsion contient de l'acide hyaluronique à grands poids moléculaire. La formation de ce filament, qui se produit à des temps intermédiaires de la rupture, coïncide avec une décroissance exponentielle de la dynamique de rupture. Le début et la fin de la rupture des émulsions d'acide hyaluronique de grands poids moléculaire montrent un comportement en loi de puissance, où l'exposant dépend de la vitesse d'étirement initiale. À une vitesse d'étirement inférieure, aucun filament n'est observé, à la fois pour les émulsions d'acide hyaluronique à grands et faibles poids moléculaires, mais aussi pour l'émulsion modèle ne contenant pas d'acide hyaluronique. Les émulsions présentent un comportement en loi de puissance sur tout le régime de rupture, où l'exposant dépend également de la vitesse d'étirement. Aucune différence significative n'est observée quant aux propriétés d'écoulement de cisaillement des émulsions contenant différents poids moléculaires d'acide hyaluronique. CONCLUSION: Dans cette étude, nous soulignons l'importance du poids moléculaire de l'acide hyaluronique sur les propriétés extensionnelles d'émulsions concentrées. Les propriétés de formation de filaments, ou la perception filante/cohésive d'une émulsion, sont un facteur clé dans l'appréciation d'un produit afin d'assurer un achat répété. Nous démontrons que la présence d'acide hyaluronique à grands poids moléculaires ainsi qu'une vitesse d'étirement élevée, sont les paramètres de contrôle affectant la formation de filaments dans une émulsion.

Mechanical cell disruption of mustard bran suspensions for improved dispersion properties and protein release.

Mustard bran, a by-product of mustard production, is still rich in valuable compounds. The high-pressure homogenization treatment was tested as a mechanical cell disruption (MCD) technique to unlock valuable intracellular compounds. An aqueous suspension of mustard bran was treated by shear mixing, followed by high-pressure homogenization at different pressure levels (50-150 MPa) and number of passes (1-10), and using different homogenizing systems. The moderate-intensity treatment (up to 100 MPa and 3 passes) can deliver significant changes in the mustard bran suspension, inducing (a) a more homogeneous and smooth appearance due to the disruption of individual cells, (b) a better structuring ability in the suspension, through the increase in viscosity and storage and loss moduli G' and G'', as well as (c) a remarkable enhancement of protein release, up to 72% of total proteins. The controlling factor in the extent of MCD was found to be the specific energy transferred to the mustard bran suspensions, whereas no significant differences were recorded when varying the homogenization system. The MCD process of mustard bran, based on its physical treatments using only water as a suspension medium, can be regarded as a safe, clean and environmentally friendly technology platform, which contributes to reaching the zero-waste concept by transforming agro-food by-products into value-added ingredients, with enhanced functionality and bioactive content.

Multivalent ion-induced re-entrant transition of carboxylated cellulose nanofibrils and its influence on nanomaterials' properties.

In this work, we identify and characterize a new intriguing capability of carboxylated cellulose nanofibrils that could be exploited to design smart nanomaterials with tuned response properties for specific applications. Cellulose nanofibrils undergo a multivalent counter-ion induced re-entrant behavior at a specific multivalent metal salt concentration. This effect is manifested as an abrupt increase in the strength of the hydrogel that returns upon a further increment of salt concentration. We systematically study this phenomenon using dynamic light scattering, small-angle X-ray scattering, and molecular dynamics simulations based on a reactive force field. We find that the transitions in the nanofibril microstructure are mainly because of the perturbing actions of multivalent metal ions that induce conformational changes of the nanocellulosic chains and thus new packing arrangements. These new aggregation states also cause changes in the thermal and mechanical properties as well as wettability of the resulting films, upon water evaporation. Our results provide guidelines for the fabrication of cellulose-based films with variable properties by the simple addition of multivalent ions.

Emulsion Destabilization by Squeeze Flow.

There is a large debate on the destabilization mechanism of emulsions. We present a simple technique using mechanical compression to destabilize oil-in-water emulsions. Upon compression of the emulsion, the continuous aqueous phase is squeezed out, while the dispersed oil phase progressively deforms from circular to honeycomb-like shapes. The films that separate the oil droplets are observed to thin and break at a critical oil/water ratio, leading to coalescence events. Electrostatic interactions and local droplet rearrangements do not determine film rupture. Instead, the destabilization occurs like an avalanche propagating through the system, starting at areas where the film thickness is smallest.

Revealing the main factors and two-way interactions contributing to food discolouration caused by iron-catechol complexation.

Fortification of food with iron is considered to be an effective approach to counter the global health problem caused by iron deficiency. However, reactivity of iron with the catechol moiety of food phenolics leads to discolouration and impairs bioavailability. In this study, we investigated the interplay between intrinsic and extrinsic factors on food discolouration caused by iron-catechol complexation. To this end, a three-level fractional factorial design was implemented. Absorbance spectra were analysed using statistical methods, including PCA, HCA, and ANOVA. Furthermore, a direct link between absorbance spectra and stoichiometry of the iron-catechol complexes was confirmed by ESI-Q-TOF-MS. All statistical methods confirm that the main effects affecting discolouration were type of iron salt, pH, and temperature. Additionally, several two-way interactions, such as type of iron salt × pH, pH × temperature, and type of iron salt × concentration significantly affected iron-catechol complexation. Our findings provide insight into iron-phenolic complexation-mediated discolouration, and facilitate the design of iron-fortified foods.

Seeded-Growth of Silica Rods from Silica-Coated Particles.

Seeded growth of silica rods from colloidal particles has emerged as a facile method to develop novel complex particle structures with hybrid compositions and asymmetrical shapes. However, this seeded-growth technique has been so far limited to colloidal particles of only a few materials. Here, we first develop a general synthesis for the seeded-growth of silica rods from silica particles. We then demonstrate the growth of silica rods from silica-coated particles with three different cores which highlight the generality of this synthesis: fluorescently labeled organo-silica (fluorescein), metallic (Ag), and organic (PS latex). We also demonstrate the assembly of these particles into supraparticles. This general synthesis method can be extended to the growth of silica rods from any colloidal particle which can be coated with silica.

Composite Gels Containing Whey Protein Fibrils and Bacterial Cellulose Microfibrils.

In this study, we investigated the gelation of WPI fibrils in the presence of bacterial cellulose (BC) microfibrils at pH 2 upon prolonged heating. Rheology and microstructure were investigated as a function of BC microfibril concentration. The presence of BC microfibrils did not influence the gelation dynamics and resulting overall structure of the WPI fibrillar gel. The storage modulus and loss modulus of the mixed WPI-BC microfibril gels increased with increasing BC microfibril concentration, whereas the ratio between loss modulus and storage modulus remained constant. The WPI fibrils and BC microfibrils independently form two coexisting gel networks. Interestingly, near to the BC microfibrils more aligned WPI fibrils seemed to be formed, with individual WPI fibrils clearly distinguishable. The level of alignment of the WPI fibrils seemed to be dependent on the distance between BC microfibrils and WPI fibrils. This also is in line with our observation that with more BC microfibrils present, WPI fibrils are more aligned than in a WPI fibrillar gel without BC microfibrils. The large deformation response of the gels at different BC microfibril concentration and NaCl concentration is mainly influenced by the concentration of NaCl, which affects the WPI fibrillar gel structures, changing form linear fibrillar to a particulate gel. The WPI fibrillar gel yields the dominant contribution to the gel strength.

Biobased Cellulose Nanofibril-Oil Composite Films for Active Edible Barriers.

Low-concentration oil-in-water emulsions stabilized by cellulose nanofibrils (CNFs) extracted from primary plant cell wall materials are used to prepare thin biobased CNF-oil composite films by solvent casting. Flexible, transparent, and biodegradable composite films are obtained, with increased thermal stability (up to 300 °C) as the oil concentration increases. Examination of the microstructure demonstrates a clear dependency on the oil content, as a multilayered structure where the oil phase trapped between two layers of CNFs is appreciated at high oil concentrations. The embedded oil significantly influences the mechanical and wetting properties of the films, confirming their potential for use in packaging systems. Encapsulation of curcumin in the composite films leads to an increased antioxidant (up to 30% radical scavenging activity) and antimicrobial activity, inhibiting the growth of foodborne bacteria such as Escherichia coli. The resulting composite films show promising results in the field of active packaging for applications in the food, pharmaceutical, and cosmetic industries.

Mixed gels from whey protein isolate and cellulose microfibrils.

Whey proteins can form different gel structures ranging from fine-stranded to particulate when appropriate conditions are applied. By incorporating polysaccharides, the gelation of WPI can be influenced. We investigated the heat-induced gelation of whey protein isolate (WPI) in the presence of bacterial cellulose (BC) microfibrils at pH 7 at different concentrations of NaCl. Our results showed that WPI and BC microfibrils form a homogeneous dispersion at pH 7. Upon heating, the WPI gel was formed independently in the presence of the BC microfibril gel, resulting in the formation of a composite gel. The gel structure and gelation dynamics of WPI was not influenced by the presence of BC microfibrils. However, the presence of BC microfibrils increased the storage modulus of the WPI gel, with an increase being negligible when the strength of the WPI gel is above a certain value. With an increase of NaCl concentration, the WPI gel structure changes from fine-stranded to a particulate gel, while the BC microfibril gel structure remains unchanged. No macroscopic phase separation could be observed in the WPI-BC microfibril gels. Our results showed that the rheological properties and water holding capacity of the WPI-BC microfibril mixed gels are mainly dominated by the WPI.

Inelastic behaviour of cellulose microfibril networks.

Cellulose microfibrils (CMF) are a unique class of shape anisotropic bio-nanomaterials, already finding many applications in diverse fields owing to their advantageous material properties and abundant availability. The rich non-linear mechanical behaviour of CMF networks has been under-studied due to the complex nature of this system, being influenced by many factors such as strong inter-fibril interactions, a heterogeneous microstructure, and process conditions. In this work, we systematically explore the non-linear rheological behaviour of these networks using a CMF model system with controlled process conditions and fibril interactions. The microfibrils were dispersed in dimethyl sulfoxide to minimise the attractive van der Waals interactions and thereby also the network heterogeneity. We show that the networks exhibit a transition with increasing shear stress from a predominantly elastic to a plastic deformation where they undergo softening. We find that the network stiffness and plasticity are dependent on the loading rate. Finally, we observed that the networks regain their original viscoelastic moduli on cessation of shear. These findings form a basis towards understanding and ultimately modelling the mechanics of CMF networks, which is a prerequisite for the rational design of novel bio-based materials.