Gel Carriers for Plant Extracts and Synthetic Pesticides in Rodent and Arthropod Pest Control: An Overview.

Insecticides and rodenticides form the basis of integrated pest management systems worldwide. As pest resistance continues to increase and entire groups of chemical active ingredients are restricted or banned, manufacturers are looking for new options for more effective formulations and safer application methods for the remaining pesticide ingredients. In addition to new technological adaptations of mainstream formulations in the form of sprays, fumigants, and dusts, the use of gel formulations is becoming increasingly explored and employed. This article summarizes information on the current and potential use of gel (including hydrogel) and paste formulations against harmful arthropods or rodents in specific branches of pest management in the agricultural, food, stored product, structural wood, urban, medical, and public health areas. Due to the worldwide high interest in natural substances, part of the review was devoted to the use of gels for the formulation of pesticide substances of botanical origin, such as essential or edible oils. Gels as emerging formulation of so called "smart insecticides" based on molecular iRNA disruptors are discussed.

Synthetic and Natural Insecticides: Gas, Liquid, Gel and Solid Formulations for Stored-Product and Food-Industry Pest Control.

The selective application of insecticides is one of the cornerstones of integrated pest management (IPM) and management strategies for pest resistance to insecticides. The present work provides a comprehensive overview of the traditional and new methods for the application of gas, liquid, gel, and solid physical insecticide formulations to control stored-product and food industry urban pests from the taxa Acarina, Blattodea, Coleoptera, Diptera, Hymenoptera, Lepidoptera, Psocoptera, and Zygentoma. Various definitions and concepts historically and currently used for various pesticide application formulations and methods are also described. This review demonstrates that new technological advances have sparked renewed research interest in the optimization of conventional methods such as insecticide aerosols, sprays, fumigants, and inert gases. Insect growth regulators/disruptors (IGRs/IGDs) are increasingly employed in baits, aerosols, residual treatments, and as spray-residual protectants for long-term stored-grain protection. Insecticide-impregnated hypoxic multilayer bags have been proven to be one of the most promising low-cost and safe methods for hermetic grain storage in developing countries. Insecticide-impregnated netting and food baits were originally developed for the control of urban/medical pests and have been recognized as an innovative technology for the protection of stored commodities. New biodegradable acaricide gel coatings and nets have been suggested for the protection of ham meat. Tablets and satchels represent a new approach for the application of botanicals. Many emerging technologies can be found in the form of impregnated protective packaging (insect growth regulators/disruptors (IGRs/IGDs), natural repellents), pheromone-based attracticides, electrostatic dust or sprays, nanoparticles, edible artificial sweeteners, hydrogels, inert baits with synthetic attractants, biodegradable encapsulations of active ingredients, and cyanogenic protective grain coatings. Smart pest control technologies based on RNA-based gene silencing compounds incorporated into food baits stand at the forefront of current strategic research. Inert gases and dust (diatomaceous earth) are positive examples of alternatives to synthetic pesticide products, for which methods of application and their integration with other methods have been proposed and implemented in practice. Although many promising laboratory studies have been conducted on the biological activity of natural botanical insecticides, published studies demonstrating their effective industrial field usage in grain stores and food production facilities are scarce. This review shows that the current problems associated with the application of some natural botanical insecticides (e.g., sorption, stability, field efficacy, and smell) to some extent echo problems that were frequently encountered and addressed almost 100 years ago during the transition from ancient to modern classical chemical pest control methods.

Minimal Thermal Requirements for Development and Activity of Stored Product and Food Industry Pests (Acari, Coleoptera, Lepidoptera, Psocoptera, Diptera and Blattodea): A Review.

Low temperatures play an important role in arthropods because they affect both the individual and population development of all physiological and behavioural activities. Manipulation with low temperatures is a primary nonchemical pest control method. For stored product and food industry practitioners, a knowledge of pest thermal requirements, in particular threshold temperatures at which development and other activities of a particular pest species cease, is of crucial importance. This review presents summary data regarding the lower temperature thresholds of 121 species of stored product and food industry pests from six arthropod taxa (Acari, Coleoptera, Lepidoptera, Psocoptera, Diptera, and Blattodea). In particular, this review collected and summarized information regarding the lower development thresholds, lower population thresholds, lower acoustic or respiratory thresholds, lower walking and flying thresholds and lower trap capture thresholds for flying and walking arthropods. The average lower development threshold (LDT) differed among orders: the lowest was reported for Acari (6.8 °C) and Diptera (8.1 °C), followed by Lepidoptera (11.3 °C) and Psocoptera (13.8 °C), and the highest was reported for Coleoptera (14 °C) and Blattodea (15 °C). An exclusion-function was established showing the percentage of pest species (n = 112) that were developmentally suppressed (excluded) due to temperatures reaching the LDT in the range of decreasing temperatures from 25 °C to 0 °C. We scaled various temperature thresholds from the lowest to highest temperature as follows: the walking threshold, the trap capture threshold for walking insects, the lower development threshold, lower population threshold, lower flying threshold and the lower trap capture threshold for flying pests. Important pest species were identified for which information regarding the lower temperature threshold is missing, or for which the information is too variable and should be refined in future research.

First Case of Dual Size Asymmetry in an Identical Arthropod Organ: Different Asymmetries of the Combative (Sexual) and Cutting (Non-Sexual) Parts of Mandibles in the Horned Stored-Product Beetle Gnatocerus cornutus (Fabricius, 1798).

Although it is known that separate insect body structures may be asymmetrical within one species, the different functional asymmetries within a single organ as a result of differential selective regimes have not been described. Based on microscopic measurements and SEM photography, we examined the size, shape and asymmetry of the mandibular structures of males and females of the sexually dimorphic broad-horned flour beetle, Gnatocerus cornutus (Tenebrionidae, Coleoptera). It was found that sexual dimorphism only manifests in certain outgrowth parts (horns) of male mandibles, while the remaining cutting parts of the mandibles hold identical morphologies for both sexes. A more interesting finding-since this is the first published case of dual functionally selected asymmetry in an identical arthropod organ-was that the cutting part of the male mandible exhibited directional asymmetry, whereas the outgrowth horn part of the mandible showed a high degree of symmetry. Moreover, there was no relationship between the size and asymmetry of horns. The results indicate different regulatory mechanisms of sexually selected combative horns and the food-functional, more conservative (constrained by hard food and adult long life) cutting parts of mandibles.

Hidden complexity in the ontogeny of sexual size dimorphism in male-larger beetles.

Sexual size dimorphism (SSD) is widespread among animals, but its developmental mechanisms are not fully undestood. We investigated the proximate causes of SSD in three male-larger and one monomorphic scarab beetles using detailed monitoring of growth in individual instars. Apart from the finding that SSD in all three male-larger species started to develop already in the first larval instar, we generally found a high variability in SSD formation among the species as well as among instars. Overall, sexual differences in developmental time, average growth rate, as well as in the shape of the growth trajectory seem to be the mechanisms responsible for SSD ontogeny in scarab beetles. In the third instar, when the larvae attain most of their mass, the males had a similar or even lower instantaneous growth rate than females and SSD largely developed as a consequence of a longer period of rapid growth in males even in cases when the sexes did not differ in the total duration of this instar. Our results demonstrate that a detailed approach, examining not only the average growth rate and developmental time, but also the shape of the growth trajectory, is necessary to elucidate the complex development of SSD.

Immature stages of giants: morphology and growth characteristics of Goliathus Lamarck, 1801 larvae indicate a predatory way of life (Coleoptera, Scarabaeidae, Cetoniinae).

The third larval instar of Goliathus goliatus (Drury, 1770), Goliathus orientalis Moser, 1909 and Goliathus albosignatus Boheman, 1857 are described and illustrated for the first time and compared with the immature stages of other Cetoniinae. Larval development of Goliathus goliatus is investigated under laboratory conditions, with particular emphasis on food requirements. These results support the obligatory requirement of proteins in the larval diet. The association between larval morphological traits (e. g., the shape of the mandibles and pretarsus, presence of well-developed stemmata) and larval biology is discussed. Based on observations and the data from captive breeds it is concluded that a possible shift from pure saprophagy to an obligatory predaceous way of larval life occurred within the larvae of this genus, which may explain why these beetles achieve such an enormous size.

Ontogeny of sexual size dimorphism in the hornless rose chafer Pachnoda marginata (Coleoptera: Scarabaeidae: Cetoniinae).

Beetles of the subfamily Cetoniinae are distinct and well-known, yet their larval ontogeny, sexual size dimorphism and development remain unknown in most species. This group contains many species with large males with prominent secondary sexual structures, such as cephalic or pronotal horns and elongated forelimbs. The species studied here, Pachnoda marginata, belongs to those species without any obvious dimorphism, the males being almost indistinguishable from the females. In this paper we examine sexual dimorphism in body shape and size in this apparently 'non-dimorphic' species. We further investigate the larval development and proximate causes of sexual size dimorphism, in particular when and how the sexes diverge in their growth trajectories during ontogeny. We found that males are larger than females and that the sexes also differ in body shape - for example, males possess significantly longer forelimbs relative to body size than females. The male-biased sexual size dimorphism along with prolonged forelimbs suggests that sexual selection for larger males may not be limited merely to horned species of rose chafers. The dimorphism in size in P. marginata arises during the second larval instar and basically remains unchanged till maturity. In both sexes the maximum body mass as well as developmental time of particular larval instars were strongly correlated, but time spent in the pupal chamber was not related to previous growth and final body size. The correlation between developmental time and adult size was negative, which may be a reflection of differences in resource allocation or utilisation for growth and development among individuals.