Artificial Cell Membrane Polymersome-Based Intranasal Beta Spike Formulation as a Second Generation Covid-19 Vaccine.

Current parenteral coronavirus disease 2019 (Covid-19) vaccines inadequately protect against infection of the upper respiratory tract. Additionally, antibodies generated by wild type (WT) spike-based vaccines poorly neutralize severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants. To address the need for a second-generation vaccine, we have initiated a preclinical program to produce and evaluate a potential candidate. Our vaccine consists of recombinant Beta spike protein coadministered with synthetic CpG adjuvant. Both components are encapsulated within artificial cell membrane (ACM) polymersomes, synthetic nanovesicles efficiently internalized by antigen presenting cells, including dendritic cells, enabling targeted delivery of cargo for enhanced immune responses. ACM vaccine is immunogenic in C57BL/6 mice and Golden Syrian hamsters, evoking high serum IgG and neutralizing responses. Compared to an ACM-WT spike vaccine that generates predominantly WT-neutralizing antibodies, the ACM-Beta spike vaccine induces antibodies that neutralize WT and Beta viruses equally. Intramuscular (IM)-immunized hamsters are strongly protected from weight loss and other clinical symptoms after the Beta challenge but show delayed viral clearance in the upper airway. With intranasal (IN) immunization, however, neutralizing antibodies are generated in the upper airway concomitant with rapid and potent reduction of viral load. Moreover, antibodies are cross-neutralizing and show good activity against Omicron. Safety is evaluated in New Zealand white rabbits in a repeated dose toxicological study under Good Laboratory Practice (GLP) conditions. Three doses, IM or IN, at two-week intervals do not induce an adverse effect or systemic toxicity. Cumulatively, these results support the application for a Phase 1 clinical trial of ACM-polymersome-based Covid-19 vaccine (ClinicalTrials.gov identifier: NCT05385991).

Potent Antiviral and Antimicrobial Polymers as Safe and Effective Disinfectants for the Prevention of Infections.

Disinfection using effective antimicrobials is essential in preventing the spread of infectious diseases. This COVID-19 pandemic has brought the need for effective disinfectants to greater attention due to the fast transmission of SARS-CoV-2. Current active ingredients in disinfectants are small molecules that microorganisms can develop resistance against after repeated long-term use and may penetrate the skin, causing harmful side-effects. To this end, a series of membrane-disrupting polyionenes that contain quaternary ammoniums and varying hydrophobic components is synthesized. They are effective against bacteria and fungi. They are also fast acting against clinically isolated drug resistant strains of bacteria. Formulating them with thickeners and nonionic surfactants do not affect their killing efficiency. These polyionenes are also effective in preventing infections caused by nonenveloped and enveloped viruses. Their effectiveness against mouse coronavirus (i.e., mouse hepatitis virus-MHV) depends on their hydrophobicity. The polyionenes with optimal compositions inactivates MHV completely in 30 s. More importantly, the polyionenes are effective in inhibiting SARS-CoV-2 by >99.999% within 30 s. While they are effective against the microorganisms, they do not cause damage to the skin and have a high oral lethal dose. Overall, these polyionenes are promising active ingredients for disinfection and prevention of viral and microbial infections.

Polymersomes as Stable Nanocarriers for a Highly Immunogenic and Durable SARS-CoV-2 Spike Protein Subunit Vaccine.

Multiple successful vaccines against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are urgently needed to address the ongoing coronavirus disease 2019 (Covid-19) pandemic. In the present work, we describe a subunit vaccine based on the SARS-CoV-2 spike protein coadministered with CpG adjuvant. To enhance the immunogenicity of our formulation, both antigen and adjuvant were encapsulated with our proprietary artificial cell membrane (ACM) polymersome technology. Structurally, ACM polymersomes are self-assembling nanoscale vesicles made up of an amphiphilic block copolymer comprising poly(butadiene)-b-poly(ethylene glycol) and a cationic lipid, 1,2-dioleoyl-3-trimethylammonium-propane. Functionally, ACM polymersomes serve as delivery vehicles that are efficiently taken up by dendritic cells (DC1 and DC2), which are key initiators of the adaptive immune response. Two doses of our formulation elicit robust neutralizing antibody titers in C57BL/6 mice that persist at least 40 days. Furthermore, we confirm the presence of functional memory CD4+ and CD8+ T cells that produce T helper type 1 cytokines. This study is an important step toward the development of an efficacious vaccine in humans.

The effect of solvent quality on pathway-dependent solution-state self-assembly of an amphiphilic diblock copolymer.

The cholesterol-functionalized polycarbonate-based diblock copolymer, PEG113-b-P(MTC-Chol)30, forms pathway-dependent nanostructures via dialysis-based solvent exchange. The initial organic solvent that dissolves or disperses the polymer dictates a self-assembly pathway. Depending upon the initial solvent, nanostructures of disk-like micelles, exhibiting asymmetric growth and hierarchical features, are accessible from a single amphiphilic precursor. Dioxane and tetrahydrofuran (THF) molecularly dissolve the block copolymer, but THF yields disks, while dioxane yields stacked disks after dialysis against water. Dimethylformamide and methanol display dispersed disks and then form stacked disk structures after dialysis. The path-dependent morphology was correlated to solubility parameters, an understanding of which offers routes to tailor self-assemblies with limited sets of building blocks.

Identification of Structural Attributes Contributing to the Potency and Selectivity of Antimicrobial Polyionenes: Amides Are Better Than Esters.

Polyionenes are a unique class of materials in which the charges reside along the polymer backbone and have emerged as an important class of antimicrobials. In this study, we have synthesized polyionenes based on quaternary ammonium salts consisting of amides or esters or amide/ester combinations. These materials have a broad spectrum of antimicrobial activity against various types of pathogenic microbes and exhibit a low minimum inhibitor concentration. Importantly, polyionenes with amides outperformed esters in terms of their antimicrobial activity, selectivity, and killing kinetics. Our findings offer insights into the macromolecular design to access selective and potent antimicrobial agents.

Effective encapsulation of apomorphine into biodegradable polymeric nanoparticles through a reversible chemical bond for delivery across the blood-brain barrier.

Apomorphine (AMP, used for treatment of Parkinson's disease) is susceptible to oxidation. Its oxidized products are toxic. To overcome these issues, AMP was conjugated to phenylboronic acid-functionalized polycarbonate through pH-sensitive covalent boronate ester bond between phenylboronic acid and catechol in AMP. Various conditions (use of base as catalyst, reaction time and initial drug loading) were optimized to achieve high AMP conjugation degree and mitigate polymer degradation caused by amine in AMP. Pyridine accelerated AMP conjugation and yielded ~74% conjugation within 5 min. Tertiary amine groups were incorporated to polycarbonate, and served as efficient catalyst (~80% conjugation within 5 min). AMP-conjugated polymer self-assembled into nanoparticles. AMP release from the nanoparticles was minimal at pH 7.4, while in acidic environment (endolysosomes) rapid release was observed. Encapsulation protected AMP from oxidization. The nanoparticles were significantly accumulated in the brain tissue after intranasal delivery. These AMP-loaded nanoparticles have potential use for treatment of Parkinson's disease.

Polymers with distinctive anticancer mechanism that kills MDR cancer cells and inhibits tumor metastasis.

Although mortality continues to decline over the past two decades, cancer is still a pervasive healthcare problem worldwide due to the increase in the number of cases, multidrug resistance (MDR) and metastasis. As a consequence of multidrug resistance, cancer treatment must rely on a host of chemotherapeutic agents and chemosensitizers to achieve remission. To overcome these problems, a series of biodegradable triblock copolymers of PEG, guanidinium-functionalized polycarbonate and polylactide (PEG-PGCx-PDLAy) is designed as chemotherapeutic agents. These copolymers self-assemble into micellar nanoparticles, and are highly effective against various cancer cell lines including human breast cancer (BCap37), liver cancer (HepG2), lung cancer (A549) and epidermoid carcinoma (A431) cell lines as well as MDR Bats-72 and Bads-200 cancer cells that were developed from BCap37. Multiple treatments with the polymers at sub-lethal doses do not induce resistance. The polymers kill cancer cells by a non-apoptotic mechanism with significant vacuolization and subsequent membrane disruption. In vivo antitumor efficacy is evaluated in a metastatic 4T1 subcutaneous tumor model. Treatment with stereocomplexes of PEG-PGC43-PLLA19 and PEG-PGC43-PDLA20 at a dose of 20 mg/kg of mouse body weight suppresses tumor growth and inhibits tumor metastasis in vivo. These polymers show promise in the treatment of cancer without the onset of resistance.

Antimicrobial polymers as therapeutics for treatment of multidrug-resistant Klebsiella pneumoniae lung infection.

Klebsiella pneumoniae (K. pneumoniae) is one of the most common pathogens in hospital-acquired infections. It is often resistant to multiple antibiotics (including carbapenems), and can cause severe pneumonia. In search of effective antimicrobials, we recently developed polyionenes that were demonstrated to be potent against a broad-spectrum of microbes in vitro. In this study, polyionenes containing rigid amide bonds were synthesized to treat multidrug-resistant (MDR) K. pneumoniae lung infection. The polyionene exhibited broad-spectrum activity against clinically-isolated MDR bacteria with low minimum inhibitory concentrations (MICs). It also demonstrated stronger antimicrobial activity against 20 clinical strains of K. pneumoniae and more rapid killing kinetics than imipenem and other commonly used antibiotics. Multiple treatments with imipenem and gentamycin led to drug resistance in K. pneumoniae, while repeated use of the polymer did not cause resistance development due to its membrane-disruption antimicrobial mechanism. Additionally, the polymer showed potent anti-biofilm activity. In a MDR K. pneumoniae lung infection mouse model, the polymer demonstrated lower effective dose than imipenem with negligible systemic toxicity. The polymer treatment significantly alleviated lung injury, markedly reduced K. pneumoniae counts in the blood and major organs, and decreased mortality. Given its potent in vivo antimicrobial activity, negligible toxicity and ability of mitigating resistance development, the polyionene may be used to treat MDR K. pneumoniae lung infection. STATEMENT OF SIGNIFICANCE: Klebsiella pneumoniae (K. pneumoniae) is one of the most common pathogens in hospital-acquired infections, is often resistant to multiple antibiotics including carbapenems and can cause severe pneumonia. In this study, we report synthesis of antimicrobial polymers (polyionenes) and their use as antimicrobial agents for treatment of K. pneumoniae-caused pneumonia. The polymers have broad spectrum antibacterial activity against clinically isolated MDR bacteria, and eliminate MDR K. pneumoniae more effectively and rapidly than clinically used antibiotics. The polymer treatment also provides higher survival rate and faster bacterial removal from the major organs and the blood than the antibiotics. Repeated use of the polymer does not lead to resistance development. More importantly, at the therapeutic dose, the polymer treatment does not cause acute toxicity. Given its in vivo efficacy and negligible toxicity, the polymer is a promising candidate for the treatment of MDR K. pneumoniae-caused pneumonia.

Addressing Drug Resistance in Cancer with Macromolecular Chemotherapeutic Agents.

Drug resistance to chemotherapeutics is a recurrent issue plaguing many cancer treatment regimens. To circumvent resistance issues, we have designed a new class of macromolecules as self-contained chemotherapeutic agents. The macromolecular chemotherapeutic agents readily self-assemble into well-defined nanoparticles and show excellent activity in vitro against multiple cancer cell lines. These cationic polymers function by selectively binding and lysing cancer cell membranes. As a consequence of this mechanism, they exhibit significant potency against drug-resistant cancer cells and cancer stem cells, prevent cancer cell migration, and do not induce resistance onset following multiple treatment passages. Concurrent experiments with the small-molecule chemotherapeutic, doxorubicin, show aggressive resistance onset in cancer cells, a lack of efficacy against drug-resistant cancer cell lines, and a failure to prevent cancer cell migration. Additionally, the polymers showed anticancer efficacy in a hepatocellular carcinoma patient derived xenograft mouse model. Overall, these results demonstrate a new approach to designing anticancer therapeutics utilizing macromolecular compounds.

Fabrication and Characterization of Hybrid Stealth Liposomes.

Next-generation liposome systems for anticancer and therapeutic delivery require the precise insertion of stabilizing polymers and targeting ligands. Many of these functional macromolecules may be lost to micellization as a competing self-assembly landscape. Here, hybrid stealth liposomes, which utilize novel cholesteryl-functionalized block copolymers as the molecular stabilizer, are explored as a scalable platform to address this limitation. The employed block copolymers offer resistance to micellization through multiple liposome insertion moieties per molecule. A combination of thermodynamic and structural investigations for a series of hybrid stealth liposome systems suggests that a critical number of cholesteryl moieties per molecule defines whether the copolymer will or will not insert into the liposome bilayer. Colloidal stability of formed hybrid stealth liposomes further corroborates the critical copolymer architecture value.

Cholesterol functionalized aliphatic N-substituted 8-membered cyclic carbonate.

Straightforward synthesis of cholesterol functionalized aliphatic N-substituted 8-membered cyclic carbonate (Chol-8m) monomer is reported. Well-defined poly(ethylene glycol) (PEG) diblock copolymers were readily accessed via organo catalytic ring opening polymerization. These polymers show promise as building blocks for self-assembled nanostructures and steric stabilizers for liposomes.

Enthalpy-driven micellization of oligocarbonate-fluorene end-functionalized Poly(ethylene glycol)☆.

A fluorescent pyrene probe method was applied to measure the critical micelle concentration (CMC) of oligocarbonate-fluorene end-functionalized poly(ethylene glycol) (FmE445Fm) triblock copolymers in water. The CMC decreases with lower temperature and higher values of the hydrophobic block length, m. When analyzed by a closed-assembly micelle model, the estimated energetic parameters find a negative ΔH°mic and small positive ΔS°mic suggestive of enthalpy-driven micellization, which differs from entropy-driven oxyethylene/oxybutylene triblock copolymers and octaethylene glycol-n-alkyl ethers. The enthalpy-driven micellization of FmE445Fm may result from the limited hydration of individual hydrophobic F blocks that leads to few hydrogen-bonded waters released during F block association. The π-π stacking oligocarbonate-fluorene system also observed enthalpy-entropy compensation when compared to a series of published data on diblock and triblock copolymer systems. An anomalously low partition equilibrium constant for m = 15.3 implies a tightly-packed core that excludes pyrene intercalation into the fluorene core. This is discussed along with the possible limited applicability to estimate the CMC and potential model drug molecule insertions into the intercalated micelle core.

Supramolecular nanofibers self-assembled from cationic small molecules derived from repurposed poly(ethylene teraphthalate) for antibiotic delivery.

Low molecular weight cationic compounds were synthesized from re-purposed poly(ethylene teraphthalate) (PET) and used to self-assemble into high aspect ratio supramolecular nanofibers for encapsulation and delivery of anionic antibiotics. The antibiotic piperacillin/tazobactam (PT) was successfully loaded into the nanofibers through ionic interaction between anionic PT and the cationic nanofibers without loss of the nanofiber features. These PT-loaded nanofibers demonstrated high loading efficiency and sustained delivery for PT. The antimicrobial activity of PT-loaded nanofibers remained potent towards both Gram-positive and Gram-negative bacteria. Importantly, in a P. aeruginosa-infected mouse skin wound model, the treatment with the PT-loaded nanofibers was more effective than free PT for wound healing as evidenced by the significantly lower P. aeruginosa counts at the wound sites and histological analysis. This strategy can be applied to deliver a variety of anionic antibiotics for improved treatment efficacy of various infections.

Biodegradable Strain-Promoted Click Hydrogels for Encapsulation of Drug-Loaded Nanoparticles and Sustained Release of Therapeutics.

Biodegradable polycarbonate-based ABA triblock copolymers were synthesized via organocatalyzed ring-opening polymerization and successfully formulated into chemically cross-linked hydrogels by strain-promoted alkyne-azide cycloaddition (SPAAC). The synthesis and cross-linking of these polymers are copper-free, thereby eliminating the concern over metallic contaminants for biomedical applications. Gelation occurs rapidly within a span of 60 s by simple mixing of the azide- and cyclooctyne-functionalized polymer solutions. The resultant hydrogels exhibited pronounced shear-thinning behavior and could be easily dispensed through a 22G hypodermic needle. To demonstrate the usefulness of these gels as a drug delivery matrix, doxorubicin (DOX)-loaded micelles prepared using catechol-functionalized polycarbonate copolymers were incorporated into the polymer solutions to eventually form micelle/hydrogel composites. Notably, the drug release rate from the hydrogels was significantly more gradual compared to the solution formulation. DOX release from the micelle/hydrogel composites could be sustained for 1 week, while the release from the micelle solution was completed rapidly within 6 h of incubation. Cellular uptake of the released DOX from the micelle/hydrogel composites was observed at 3 h of incubation of human breast cancer MDA-MB-231 cells. A blank hydrogel containing PEG-(Cat)12 micelles showed almost negligible toxicity on MDA-MB-231cells where cell viability remained high at >80% after treatment. When the cells were treated with the DOX-loaded micelle/hydrogel composites, there was a drastic reduction in cell viability with only 25% of cells surviving the treatment. In all, this study introduces a simple method of formulating hydrogel materials with incorporated micelles for drug delivery applications.

Broad Spectrum Macromolecular Antimicrobials with Biofilm Disruption Capability and In Vivo Efficacy.

In this study, antimicrobial polymers are synthesized by the organocatalytic ring-opening polymerization of an eight-membered heterocyclic carbonate monomer that is subsequently quaternized with methyl iodide. These polymers demonstrate activity against clinically relevant Gram-positive Staphylococcus epidermidis and Staphylococcus aureus, Gram-negative Escherichia coli and Pseudomonas aeruginosa, and fungus Candida albicans with fast killing kinetics. Importantly, the polymer efficiently inhibits biofilm growth and lyses existing biofilm, leading to a reduction in biomass and cell viability. In addition, the macromolecular antimicrobial is less likely to induce resistance as it acts via a membrane-lytic mechanism. The polymer is not cytotoxic toward mammalian cells with LD50 of 99.0 ± 11.6 mg kg-1 in mice through i.v. injection. In an S. aureus blood stream infection mouse model, the polymer removes bacteria from the blood more rapidly than the antibiotic Augmentin. At the effective dose, the polymer treatment does not damage liver and kidney tissues or functions. In addition, blood electrolyte balance remains unchanged after the treatment. The low cost of starting materials, ease of synthesis, nontoxicity, broad spectrum activity with fast killing kinetics, and in vivo antimicrobial activity make these macromolecular antimicrobials ideal candidates for prevention of sepsis and treatment of infections.

Amphiphilic and Hydrophilic Block Copolymers from Aliphatic N-Substituted 8-Membered Cyclic Carbonates: A Versatile Macromolecular Platform for Biomedical Applications.

Introduction of hydrophilic components, particularly amines and zwitterions, onto a degradable polymer platform, while maintaining precise control over the polymer composition, has been a challenge. Recognizing the importance of these hydrophilic residues in multiple aspects of the nanobiomedicine field, herein, a straightforward synthetic route to access well-defined amphiphilic and hydrophilic degradable block copolymers from diethanolamine-derived functional eight-membered N-substituted aliphatic cyclic carbonates is reported. By this route, tertiary amine, secondary amine, and zwitterion residues can be incorporated across the polymer backbone. Demonstration of pH-responsiveness of these hydrophilic residues and their utility in the development of drug-delivery vehicles, catered for the specific requirements of respective model drugs (doxorubicin and diclofenac sodium salt) are shown. As hydrophilic components in degradable polymers play crucial roles in the biological interactions, these materials offers opportunities to expand the scope and applicability of aliphatic cyclic carbonates. Our approach to these functional polycarbonates will expand the range of biocompatible and biodegradable synthetic materials available for nanobiomedicine, including drug and gene delivery, antimicrobials, and hydrophilic polymers as poly(ethylene glycol) (PEG) alternatives.

Biodegradable functional polycarbonate micelles for controlled release of amphotericin B.

Amphotericin B (AmB), a poorly soluble and toxic antifungal drug, was encapsulated into polymeric micelles self-assembled from phenylboronic acid-functionalized polycarbonate/PEG (PEG-PBC) and urea-functionalized polycarbonate/PEG (PEG-PUC) diblock copolymers via hydrogen-bonding, boronate ester bond, and/or ionic interactions between the boronic acid group in the micellar core and amine group in AmB. Three micellar formulations were prepared: AmB/B micelles using PEG-PBC, AmB/U micelles using PEG-PUC and AmB/B+U mixed micelles using 1:1molar ratio of PEG-PBC and PEG-PUC. The average particle sizes of the micelles were in the range of 54.4-84.8nm with narrow size distribution and zeta potentials close to neutral. UV-Vis absorption analysis indicated that AmB/B micelles significantly reduced AmB aggregation status due to the interactions between AmB and the micellar core, while Fungizone® and AmB/U micelles had no effect. AmB/B+U mixed micelles exerted an intermediate effect. Both AmB/B micelles and AmB/B+U mixed micelles showed sustained drug release, with 48.6±2.1% and 59.2±1.8% AmB released respectively after 24hunder sink conditions, while AmB/U micelles displayed a burst release profile. All AmB-loaded micelles showed comparable antifungal activity to free AmB or Fungizone®, while AmB/B micelles and AmB/B+U mixed micelles were much less hemolytic than other formulations. Histological examination showed that AmB/B and AmB/B+U micelles led to a significantly lower number of apoptotic cells in the kidneys compared to Fungizone®, suggesting reduced nephrotoxicity of the micellar formulations in vivo. These phenylboronic acid-functionalized polymeric micelle systems are promising drug carriers for AmB to reduce non-specific toxicities without compromise in antifungal activity. STATEMENT OF SIGNIFICANCE: There is a pressing need for a novel and cost-effective delivery system to reduce the toxicity induced by the antifungal agent, amphotericin B (AmB). In this study, phenylboronic acid-functionalized polycarbonate/PEG diblock copolymers were used to fabricate micelles for improved AmB-micelle interaction via the manipulation of hydrogen-bonding, boronate ester bond, ionic and hydrophobic interactions. Compared to free AmB and Fungizone®, the resultant micellar systems displayed improved stability while reducing non-specific toxicities without a compromise in antifungal activity. These findings demonstrate the potential of biodegradable functional polycarbonate micellar systems as promising carriers of AmB for the treatment of systemic fungal infections.

A Simple and Facile Approach to Aliphatic N-Substituted Functional Eight-Membered Cyclic Carbonates and Their Organocatalytic Polymerization.

Aliphatic N-substituted functional eight-membered cyclic carbonates were synthesized from N-substituted diethanolamines by intramolecular cyclization. On the basis of the N-substituent, three major subclasses of carbonate monomers were synthesized (N-aryl, N-alkyl and N-carbamate). Organocatalytic ring opening polymerization (ROP) of eight-membered cyclic carbonates was explored as a route to access narrowly dispersed polymers of predictable molecular weights. Polymerization kinetics was highly dependent on the substituent on the nitrogen atom and the catalyst used for the reaction. The use of triazabicyclodecene (TBD), instead of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), as the catalyst for the N-alkyl substituted monomers significantly enhanced the rate of polymerizations. Computational studies were performed to rationalize the observed trends for TBD catalyzed polymerizations. With the optimal organocatalyst all monomers could be polymerized generating well-defined polymers within a timespan of ≤2 h with relatively high monomer conversion (≥80%) and low molar-mass dispersity (D(M) ≤ 1.3). Both the glass transition temperatures (T(g)) and onset of degradation temperatures (T(onset)) of these polymers were found to be N-substituent dependent and were in the range of about -45 to 35 °C and 230 to 333 °C, respectively. The copolymerization of the eight membered monomers with 6-membered cyclic comonomers including commercially available l-lactide and trimethylene carbonate produced novel copolymers. The combination of inexpensive starting materials, ease of ring-closure and subsequent polymerization makes this an attractive route to functional polycarbontes.

Structure-directing star-shaped block copolymers: supramolecular vesicles for the delivery of anticancer drugs.

Amphiphilic polycarbonate/PEG copolymer with a star-like architecture was designed to facilitate a unique supramolecular transformation of micelles to vesicles in aqueous solution for the efficient delivery of anticancer drugs. The star-shaped amphipilic block copolymer was synthesized by initiating the ring-opening polymerization of trimethylene carbonate (TMC) from methyl cholate through a combination of metal-free organo-catalytic living ring-opening polymerization and post-polymerization chain-end derivatization strategies. Subsequently, the self-assembly of the star-like polymer in aqueous solution into nanosized vesicles for anti-cancer drug delivery was studied. DOX was physically encapsulated into vesicles by dialysis and drug loading level was significant (22.5% in weight) for DOX. Importantly, DOX-loaded nanoparticles self-assembled from the star-like copolymer exhibited greater kinetic stability and higher DOX loading capacity than micelles prepared from cholesterol-initiated diblock analogue. The advantageous disparity is believed to be due to the transformation of micelles (diblock copolymer) to vesicles (star-like block copolymer) that possess greater core space for drug loading as well as the ability of such supramolecular structures to encapsulate DOX. DOX-loaded vesicles effectively inhibited the proliferation of 4T1, MDA-MB-231 and BT-474 cells, with IC50 values of 10, 1.5 and 1.0mg/L, respectively. DOX-loaded vesicles injected into 4T1 tumor-bearing mice exhibited enhanced accumulation in tumor tissue due to the enhanced permeation and retention (EPR) effect. Importantly, DOX-loaded vesicles demonstrated greater tumor growth inhibition than free DOX without causing significant body weight loss or cardiotoxicity. The unique ability of the star-like copolymer emanating from the methyl cholate core provided the requisite modification in the block copolymer interfacial curvature to generate vesicles of high loading capacity for DOX with significant kinetic stability that have potential for use as an anti-cancer drug delivery carrier for cancer therapy.

Effects of incorporation of azido moieties into the hydrophobic core of coiled coil peptides.

The secondary structure of the coiled coil peptides was regulated by altering the azido content at the hydrophobic core. These peptides were further investigated to form higher-order assemblies presumably via azido-mediated interactions.