ABSTRACT
With the increasing demands on sustainability in the material science and engineering landscape, the use of wood, a renewable and biodegradable material, for new material development has drawn increasing attentions in the materials science community. To promote the development of new wood-based materials, it is critical to understanding not only wood's hierarchical structure from molecule to macroscale level, but also the interactions of wood with other materials and chemicals upon modification and functionalization. In this review, we discuss the recent advances in the Raman imaging technique, a new approach that combines spectroscopy and microscopy, in wood characterization and structural evolution monitoring during functionalization. We introduce the principles of Raman spectroscopy and common Raman instrumentations. We survey the use of traditional Raman spectroscopy for lignocellulosic material characterizations including cellulose crystallinity determination, holocellulose discrimination, and lignin substructure evaluation. We briefly review the recent studies on wood property enhancement and functional wood-based material development through wood modification including thermal treatment, acetylation, furfurylation, methacrylation, delignification. Subsequently, we highlight the use of the Raman imaging for visualization, spatial and temporal distribution of wood cell wall structure, as well as the microstructure evolution upon functionalization. Finally, we discuss the future prospects of the field.
Subject(s)
Cellulose , Lignin , Cell Wall/chemistry , Cellulose/chemistry , Lignin/chemistry , Spectrum Analysis, Raman/methodsABSTRACT
This study compared the lead (Pb2+) immobilization efficacy of biochar-supported phosphate to conventional in-situ heavy metal immobilization methods (with lime, neat biochar and phosphate). The biochar-supported phosphate was obtained by treating Douglas fir biochar (BC) with anhydrous calcium chloride and potassium dihydrogen phosphate. The amount of Pb2+ immobilized was determined by comparing the concentration of ammonium nitrate extractable Pb2+ lead from lead-spiked soil (without amendment) to that of a 30 d incubation with (a) lead-spiked soil plus 5% (wt./wt.) biochar supported-phosphate, (b) lead-spiked soil plus 5% (wt./wt.) untreated Douglas fir biochar, (c) lead-spiked soil plus 5% (w/w) lime and (d) lead-spiked soil plus 5% (wt./wt.) potassium dihydrogen phosphate. The control (lead-spiked soil without amendment) produced the largest quantity (96.08 ± 9.22 mg L-1) of NH4NO3-extractable Pb2+, while lead-spiked soil treated with 5% (wt./wt.) biochar-supported phosphate resulted in the lowest quantity of NH4NO3 extractable Pb2+ (0.3 ± 0.2 mg L-1). The mechanism for immobilization of Pb2+ by BP occurs at pH < 7 through dissolution of hydroxyapatite embedded in BP during modification, followed by precipitation of insoluble Pb10(PO4)6(OH)2. The residual lead fraction in the lead-spiked soil increased by 20.9% following amendment with BP. These results indicate that biochar-supported phosphate is a candidate to reduce lead mobility (bioavailability) in polluted soil. This amendment may lower Pb2+ uptake into plants while minimizing the potential for water contamination due to Pb2+mobility.
Subject(s)
Pseudotsuga , Soil Pollutants , Charcoal , Lead , Phosphates , Soil , Soil Pollutants/analysisABSTRACT
Aqueous phosphate uptake is needed to reduce global eutrophication. Negatively charged adsorbent surfaces usually give poor phosphate sorption. Chemically- and thermally-modified lignite (CTL) was prepared by impregnating low-cost lignite (RL) with Ca2+ and Mg2+ cations, basified with KOH (pH Ì´ 13.9), followed by a 1 h 600 °C pyrolysis under nitrogen. CTL has a positive surface (PZC = 13) due to basic surface Ca and Mg compounds, facilitating the aqueous phosphate uptake. CaCO3, MgO, Ca(OH)2, and Mg(OH)2 surface phases with 0.22 µm particle sizes were verified by XRD, XPS, SEM, TEM, and EDX before and after phosphate uptake. Higher amounts of these mineral phases promoted more CTL phosphate uptake than raw lignite (RL) and thermally treated lignite (TL) without Ca/Mg modification. Phosphorous uptake by Ca2+/Mg2+ occurs not by classic adsorption but by stochiometric precipitation of Mg3(PO4)2, MgHPO4, Ca3(PO4)2, and CaHPO4. This offers the potential of substantial uptake capacities. CTL's phosphate removal is pH-dependent; the optimum pH was 2.2. Water-washed CTL exhibited a maximum Langmuir phosphate uptake capacity of 15.5 mg/g at pH 7, 6 and 14 times higher than that of TL and RL, respectively (particle size <150 µm, adsorbent dose 50 mg, 25 mL of 25-1000 ppm phosphate concentration, 24 h, 25 °C). The unwashed CTL exhibited a maximum Langmuir phosphate removal capacity (80.6 mg/g), 5.2-times greater than the washed CTL (15.5 mg/g). Insoluble Ca2+ and Mg2+ phosphates/hydrophosphate particles dominated CTL's phosphate removal. Phosphates were recovered from both exhausted unwashed and washed CTL better in HCl than in NaOH. P-laden washed CTL exhibited a slow phosphate leaching rate under initial pH of 6.5-7.5 (52-57% over 20 days) after phosphate uptake, indicating it could serve as a slow-release fertilizer. Unwashed CTL retained more phosphates than washed CTL (cumulative qe for 4 cycles = 391.8 mg/g vs 374.7 mg/g) and potentially improves soil fertility more.
ABSTRACT
Biochar-based hybrid composites containing added nano-sized phases are emerging adsorbents. Biochar, when functionalized with nanomaterials, can enhance pollutant removal when both the nanophase and the biochar surface act as adsorbents. Three different pine wood wastes (particle size < 0.5 mm, 10 g) were preblended with 1 wt% of three different graphenes in aqueous suspensions, designated as G1, G2, and G3. G1 (SBET, 8.1 m2/g) was prepared by sonicating graphite made from commercial synthetic graphite powder (particle size 7-11 µm). G2 (312.0 m2/g) and G3 (712.0 m2/g) were purchased commercial graphene nanoplatelets (100 mg in 100 mL deionized water). These three pine wood-graphene mixtures were pyrolyzed at 600 °C for 1 h to generate three graphene-biochar adsorbents, GPBC-1, GPBC-2, and GPBC-3 containing 4.4, 4.9, and 5.0 wt% of G1, G2, and G3 respectively. Aqueous Cu2+ adsorption capacities were 10.6 mg/g (GPBC-1), 4.7 mg/g (GPBC-2), and 5.5 mg/g (GPBC-3) versus 7.2 mg/g for raw pine wood biochar (PBC) (0.05 g adsorbent dose, Cu2+ 75 mg/L, 25 mL, pH 6, 24 h, 25 ± 0.5 °C). Increased graphene surface areas did not result in adsorption increases. GPBC-1, containing the lowest nanophase surface area with the highest Cu2+ capacity, was chosen to evaluate its Cu2+ adsorption characteristics further. Results from XPS showed that the surface concentration of oxygenated functional groups on the GPBC-1 is greater than that on the PBC, possibly contributing to its greater Cu2+ removal versus PBC. GPBC-1 and PBC uptake of Cu2+ followed the pseudo-second-order kinetic model. Langmuir maximum adsorption capacities and BET surface areas were 18.4 mg/g, 484.0 m2/g (GPBC-1) and 9.2 mg/g, 378.0 m2/g (PBC). This corresponds to 3.8 × 10-2 versus 2.4 × 10-2 mg/m2 of Cu2+ removed on GPBC-1 (58% more Cu2+ per m2) versus PBC. Cu2+ adsorption on both these adsorbents was spontaneous and endothermic.
Subject(s)
Graphite , Pinus , Water Pollutants, Chemical , Adsorption , Charcoal , Copper , Kinetics , Water , Water Pollutants, Chemical/analysis , Wood/chemistryABSTRACT
Zn2SnO4 (ZTO) nanocrystals are extensively studied in various fields. However, size-dependent ZTO nanocrystals are still challenging to understand their structural, optical, photocatalytic, and optoelectronic properties. ZTO nanocrystals are synthesized by a facile hydrothermal reaction method. The structural properties of the synthesized ZTO nanocrystals are studied by x-ray diffraction and transmission electron microscope. The sizes of the ZTO nanocrystals are controlled by the pH values of the precursor and the molar ratios of the Zn:Sn in the starting materials. ZTO nanocrystals with the small size of 6 nm and large size of 270 nm are obtained by our method. The Eu3+ ions are doped into ZTO nanocrystals to probe size-dependent Eu doping sites, which shows significant potential applications in light emitting diode phosphors. Moreover, the photocatalytic activity of ZTO nanocrystals on rhodamine (RhB) decoloration are investigated, and the results show that 6 nm ZTO nanocrystals show better performance in the photocatalytic decoloration of RhB compared to 270 nm nanocrystals. Most importantly, we design and fabricate optoelectronic devices to detect IR light based on our nanocrystals and a self-prepared NIR cyanine dye. The device based on small sized ZTO nanocrystals exhibits better device performance under 808 nm IR light compared to that of the large sized ZTO nanocrystals. We believe this work represents ZTO size-dependent properties in term of structural, optical, photocatalytic, and optoelectronic properties as a multifunctional material.
ABSTRACT
Myroides spp and Chryseobacterium spp are uncommon clinical isolates, though more frequently reported to cause infections than other pigmented non-fermentors. Two cases of Myroides odoratus and Chryseobacterium indologenes infection in a diabetic with pulmonary tuberculosis and a patient with de-compensated alcoholic liver disease, respectively, are reported here. Anti-microbial susceptibility testing of the isolates was performed by determining the minimum inhibitory concentration. The clinical picture, characteristic features of the isolates and the antibiotic susceptibility pattern are discussed briefly.
Subject(s)
Chryseobacterium/isolation & purification , Flavobacteriaceae Infections/diagnosis , Flavobacteriaceae Infections/microbiology , Flavobacteriaceae/isolation & purification , Immunocompromised Host , Anti-Bacterial Agents/pharmacology , Chryseobacterium/drug effects , Female , Flavobacteriaceae/drug effects , Flavobacteriaceae Infections/pathology , Humans , Male , Microbial Sensitivity Tests , Middle AgedABSTRACT
BACKGROUND: There is limited data about current utilization of miniscrews in orthodontic practices in India. The purpose of this survey was to obtain information on clinical utilization of miniscrews among orthodontists in India. MATERIALS AND METHODS: A survey questionnaire was prepared and mailed to 2100 qualified and registered orthodontists in India. RESULTS: A total of 1691 orthodontists responded to the survey, with a response rate of 80.52%. Among them, 952 (56.3%) had never used miniscrews in their clinical practice. Seven hundred and thirty-nine (739) (43.7%) had utilized miniscrews in their treatment, at some point of time. Among the orthodontists who used miniscrews, 463 (62.65%) used a surgical guide for positioning the miniscrews and 276 (37.35%) placed miniscrews without a surgical guide. Six hundred and thirty-four (634) (85.79%) orthodontists placed the miniscrews personally while 105 (14.21%) utilized the help of other specialists for placing the miniscrews. Among the orthodontists who used miniscrews, 76 (10.28%) utilized the help of oral surgeon to place the miniscrews while 29 (3.93%) utilized the help of periodontists to do the procedure. CONCLUSION: Miniscrews are a useful addition to the orthodontic armamentarium. The major indication for miniscrew was indirect anchorage in critical anchorage cases. The most important factors in determining the clinical utilization of miniscrews as a part of the treatment modality depends upon operator training and skill; fear of complications, patient refusal to accept miniscrews and the clinician's preference for conventional methods without unnecessary invasive procedure.
ABSTRACT
Complement-dependent lymphocytotoxicity crossmatches (n=217) between 47 deceased donors and 150 potential renal recipients were retrospectively studied. A negative cross match was reported in 48 (22.1%), doubtful positive in 126 (58.1%), weakly positive in 32 (14.7%) and positive in 11 (5.1%). No autoantibodies were detected. Renal transplantation was performed in 35.5% of the potential recipients. There was no incidence of hyperacute rejection. The graft survival rate was 88% at 15 months of follow up. The study concludes that a negative pretransplant lympocytotoxicity crossmatch using the basic National Institute of Health technique eliminates hyperacute rejection, but carries drawbacks, which require modification and supplementation with more sensitive and specific assays.