Highly Sensitive and Cost-Effective Portable Sensor for Early Gastric Carcinoma Diagnosis.

Facile and efficient early detection of cancer is a major challenge in healthcare. Herein we developed a novel sensor made from a polycarbonate (PC) membrane with nanopores, followed by sequence-specific Oligo RNA modification for early gastric carcinoma diagnosis. In this design, the gastric cancer antigen CA72-4 is specifically conjugated to the Oligo RNA, thereby inhibiting the electrical current through the PC membrane in a concentration-dependent manner. The device can determine the concentration of cancer antigen CA72-4 in the range from 4 to 14 U/mL, possessing a sensitivity of 7.029 µAU-1mLcm-2 with a linear regression (R2) of 0.965 and a lower detection limit of 4 U/mL. This device has integrated advantages including high specificity and sensitivity and being simple, portable, and cost effective, which collectively enables a giant leap for cancer screening technologies towards clinical use. This is the first report to use RNA aptamers to detect CA72-4 for gastric carcinoma diagnosis.

Development of a carboxyl-terminated indium tin oxide electrode for improving cell adhesion and facilitating low noise, real-time impedance measurements.

The working electrode's surface property is crucial to cell adhesion and signal collection in electric cell-substrate impedance sensing (ECIS). To date, the indium tin oxide (ITO)-based working electrode is of interest in ECIS study due to its high transparency and biocompatibility. Of great concern is the impedance signal loss, distortion, and data interpretation conflict profoundly created by the movement of multiple cells during ECIS study. Here, a carboxyl-terminated ITO substrate was prepared by stepwise surface amino silanization, with N-hydroxy succinimide (NHS) and 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide hydrochloride (EDC) treatment, respectively. We investigated the stepwise changes in the property of the treated ITO, cell-substrate adhesion, collective cell mobility, and time course of change in absolute impedance from multiple Chinese hamster ovary (CHO) cells [(Δt-Δ|Z|)CELLS]. The carboxyl-terminated ITO substrate with a surface roughness of 6.37 nm shows enhanced conductivity, 75% visible light transparency, improved cell adherence, reduced collective cell migration speed by approximately twofold, and diminished signal distortion in the [(Δt-Δ|Z|)CELLS]. Thus, our study provides an ITO surface-treatment strategy to reduce multiple cell movement effects and to obtain essential cell information from the ECIS study of multiple cells through undistorted (Δt-Δ|Z|)CELLS.

Portable molecularly imprinted polymer-based platform for detection of histamine in aqueous solutions.

Histamine, which is a naturally occurring chemical in seafood, is known to cause undesirable inflammatory response when consumed in large amounts. Histamine is produced in unsafe amounts in colored seafood when improperly stored for just a few hours. Food and health regulatory bodies across the world have guidelines limiting the amount of histamine in fresh as well as processed seafood. Conventional histamine detection is performed in testing labs, which is a slow process and results in bottlenecks in the seafood supply-chain system. A system to rapidly detect the seafood histamine levels on site is very desirable for seafood suppliers. Herein, we describe an impedance-based histamine detection sensor built on a flexible substrate that can detect histamine in the range of 100-500 ppm. Moreover, our sensor discriminates histamine in the presence of DL-histidine and other biogenic amines, with the selectivity provided by molecular imprinting technology. As a proof of concept, a smartphone controlled, portable semi-quantitative histamine sensing device was fabricated that gave out reliable testing results for histamine in different test solutions as well as for real seafood. We believe this technology can be extended towards determination of other food contaminants in aqueous solutions.

Bioinspired, Self-Powered, and Highly Sensitive Electronic Skin for Sensing Static and Dynamic Pressures.

Flexible piezoresistive pressure sensors obtain global research interest owing to their potential applications in healthcare, human-robot interaction, and artificial nerves. However, an additional power supply is usually required to drive the sensors, which results in increased complexity of the pressure sensing system. Despite the great efforts in pursuing self-powered pressure sensors, most of the self-powered devices can merely detect the dynamic pressure and the reliable static pressure detection is still challenging. With the help of redox-induced electricity, a bioinspired graphite/polydimethylsiloxane piezoresistive composite film acting both as the cathode and pressure sensing layer, a neoteric electronic skin sensor is presented here to detect not only the dynamic forces but also the static forces without an external power supply. Additionally, the sensor exhibits a fascinating pressure sensitivity of ∼103 kPa-1 over a broad sensing range from 0.02 to 30 kPa. Benefiting from the advanced performance of the device, various potential applications including arterial pulse monitoring, human motion detecting, and Morse code generation are successfully demonstrated. This new strategy could pave a way for the development of next-generation self-powered wearable devices.

Gating a Single Cell: A Label-Free and Real-Time Measurement Method for Cellular Progression.

There is an ever-growing need for more advanced methods to study the response of cancer cells to new therapies. To determine cancer cells' response from a cell-mortality perspective to various cancer therapies, we report a label-free and real time method to monitor the in situ response of individual HeLa cells using a single cell gated transistor (SCGT). As a cell undergoes apoptotic cell death, it experiences changes in morphology and ion concentrations. This change is well in line with the threshold voltage of the SCGT, which has been verified by correlating the data with the cell morphologies by scanning electron microscopy and the ion-concentration analysis by inductively-coupled plasma mass spectrometry (ICPMS). This SCGT could replace patch clamps to study single cell activity via direct measurement in real time. Importantly, this SCGT can be used to study the electrical response of a single cell to stimuli that leaves the membrane intact.

Serpentine Ni3 Ge2 O5 (OH)4 Nanosheets with Tailored Layers and Size for Efficient Oxygen Evolution Reactions.

Layered serpentine Ni3 Ge2 O5 (OH)4 is compositionally active and structurally favorable for adsorption and diffusion of reactants in oxygen evolution reactions (OER). However, one of the major problems for these materials is limited active sites and low efficiency for OER. In this regard, a new catalyst consisting of layered serpentine Ni3 Ge2 O5 (OH)4 nanosheets is introduced via a controlled one-step synthetic process where the morphology, size, and layers are well tailored. The theoretical calculations indicate that decreased layers and increased exposure of (100) facets in serpentine Ni3 Ge2 O5 (OH)4 lead to much lower Gibbs free energy in adsorption of reactive intermediates. Experimentally, it is found that the reduction in number of layers with minimized particle size exhibits plenty of highly surface-active sites of (100) facets and demonstrates a much enhanced performance in OER than the corresponding multilayered nanosheets. Such a strategy of tailoring active sites of serpentine Ni3 Ge2 O5 (OH)4 nanosheets offers an effective method to design highly efficient electrocatalysts.

Dual-Gated Transistor Platform for On-Site Detection of Lead Ions at Trace Levels.

On-site monitoring of heavy metals in drinking water has become crucial because of several high profile instances of contamination. Presently, reliable techniques for trace level heavy metal detection are mostly laboratory based, while the detection limits of contemporary field-based methods are barely meeting the exposure limits set by regulatory bodies such as the World Health Organization (WHO). Here, we show an on-site deployable, Pb2+ sensor on a dual-gated transistor platform whose lower detection limit is 2 orders of magnitude better than the traditional sensor and 1 order of magnitude lower than the exposure limit set by WHO. The enhanced sensitivity of our design is verified by numerically solving PNP (Planck-Nernst-Poisson) model. We demonstrate that the enhanced sensitivity is due to the suppression of ionic flux. The simplicity and the robustness of the design make it applicable for on-site screening, thereby facilitating rapid response to contamination events.

Highly Sensitive and Ultrastable Skin Sensors for Biopressure and Bioforce Measurements Based on Hierarchical Microstructures.

Piezoresistive microsensors are considered to be essential components of the future wearable electronic devices. However, the expensive cost, complex fabrication technology, poor stability, and low yield have limited their developments for practical applications. Here, we present a cost-effective, relatively simple, and high-yield fabrication approach to construct highly sensitive and ultrastable piezoresistive sensors using a bioinspired hierarchically structured graphite/polydimethylsiloxane composite as the active layer. In this fabrication, a commercially available sandpaper is employed as the mold to develop the hierarchical structure. Our devices exhibit fascinating performance including an ultrahigh sensitivity (64.3 kPa-1), fast response time (<8 ms), low limit of detection of 0.9 Pa, long-term durability (>100 000 cycles), and high ambient stability (>1 year). The applications of these devices in sensing radial artery pulses, acoustic vibrations, and human body motion are demonstrated, exhibiting their enormous potential use in real-time healthcare monitoring and robotic tactile sensing.

An Overview of the Development of Flexible Sensors.

Flexible sensors that efficiently detect various stimuli relevant to specific environmental or biological species have been extensively studied due to their great potential for the Internet of Things and wearable electronics applications. The application of flexible and stretchable electronics to device-engineering technologies has enabled the fabrication of slender, lightweight, stretchable, and foldable sensors. Here, recent studies on flexible sensors for biological analytes, ions, light, and pH are outlined. In addition, contemporary studies on device structure, materials, and fabrication methods for flexible sensors are discussed, and a market overview is provided. The conclusion presents challenges and perspectives in this field.

Solution-Processed Rare-Earth Oxide Thin Films for Alternative Gate Dielectric Application.

Previous investigations on rare-earth oxides (REOs) reveal their high possibility as dielectric films in electronic devices, while complicated physical methods impede their developments and applications. Herein, we report a facile route to fabricate 16 REOs thin insulating films through a general solution process and their applications in low-voltage thin-film transistors as dielectrics. The formation and properties of REOs thin films are analyzed by atomic force microscopy (AFM), X-ray diffraction (XRD), spectroscopic ellipsometry, water contact angle measurement, X-ray photoemission spectroscopy (XPS), and electrical characterizations, respectively. Ultrasmooth, amorphous, and hydrophilic REO films with thickness around 10 nm have been obtained through a combined spin-coating and postannealing method. The compositional analysis results reveal the formation of RE hydrocarbonates on the surface and silicates at the interface of REOs films annealed on Si substrate. The dielectric properties of REO films are investigated by characterizing capacitors with a Si/Ln2O3/Au (Ln = La, Gd, and Er) structure. The observed low leakage current densities and large areal capacitances indicate these REO films can be employed as alternative gate dielectrics in transistors. Thus, we have successfully fabricated a series of low-voltage organic thin-film transistors based on such sol-gel derived REO films to demonstrate their application in electronics. The optimization of REOs dielectrics in transistors through further surface modification has also been studied. The current study provides a simple solution process approach to fabricate varieties of REOs insulating films, and the results reveal their promising applications as alternative gate dielectrics in thin-film transistors.