ABSTRACT
Introduction: Numerous manufacturers have improved bracket retention systems as a result of the frequent bond failure that occurs during orthodontic treatment. One of the elements affecting the adhesive's bond strength is the bracket retention mechanism. Objectives: This study's objective was to assess how various bracket base retention characters affected shear bond strength. Materials and Methods: Four distinct base features for brackets were evaluated. The basic design was examined using a scanning electron microscope. On the Universal testing equipment, brackets were glued to human teeth and then released. Results: The findings indicate that the polymer-coated base's overall mean SBS, which had a mean value of 21.64 ± 4.14 MPa, was considerably greater than that of the other brackets (P 0.05). The foil meshpad, photochemically etched base, and laser-structured base had mean SBS values of 15.12 ± 5.75 MPa, 16.86 ± 3.76 MPa, and 19.32 ± 4.23MPa, respectively. Conclusions: Following laser-structured base and photochemically etched base brackets in terms of shear bond strength were polymer-coated base brackets. The shear bond strength was the lowest in the plain foil mesh pads.
ABSTRACT
Aim: The study was done to evaluate extraction of teeth without altering the aspirin therapy. Materials and Method: Hundred patients taking aspirin therapy requiring extraction of teeth were separated into two groups with 50 samples in each. Group I continued the aspirin therapy during extraction of teeth on one occasion, and the same patients who discontinued the aspirin therapy 72 hours before extraction of teeth on another occasion become Group II. Result: The mean blood loss showed slightly increased bleeding in Group I in comparison to Group II. The average bleeding time and mean INR was statistically significant among both groups. The mean clotting time and mean platelet count were not statistically significant among groups. Conclusion: There was no alteration in bleeding after extraction in patients with low doses of aspirin therapy.
ABSTRACT
OBJECTIVES: To compare nickel-titanium (NiTi) wires and clear aligners in the management of mandibular incisor crowding. METHODS: Seventy-two participants were arbitrarily alienated into two groups with 36 samples in each. Group I participants were treated with NiTi arch wires and group II participants with clear aligners. Malocclusion was evaluated using Little's irregularity index. A questionnaire was applied to record the discomfort levels. Patients were recalled regularly at four weeks, eight weeks, and twelve weeks. RESULTS: At baseline, the mean score was 2.91 mm and 2.72 mm; at 4 weeks, it was 1.64 mm and1.48 mm; at 8 weeks, it was 0.98 mm and1.0 mm; and at 12 weeks, it was 0.68 mm and 0.52 mm in groups I and II, respectively. The mean change in Little's irregularity index score at 4 weeks was 1.27 mm and 1.24 mm; at 8 weeks, it was 0.66 mm and 0.48 mm; and at 12 weeks, it was 0.30 mm and 0.48 mm in groups I and II, respectively. The disparity was not-considerable (p > 0.05). The mean discomfort score at baseline was 2.8 and 2.5; at 4 weeks, it was 2.4 and 2.0; at 8 weeks, it was 1.8 and 1.4; and at 12 weeks, it was 1.3 and 1.0 for groups I and II correspondingly. The disparity was non-significant (p > 0.05). CONCLUSION: From the present study, it was found that both NiTi wires and clear aligners were equally effective in managing mandibular anterior crowding cases.
ABSTRACT
Objectives: This study aims to evaluate the association of orthodontic tooth movement with the concentration of leptin in gingival crevicular fluid (GCF). Materials and Methods: In thirty orthodontic patients, the concentration of leptin was assessed at baseline, 1 h, 24 h, 7 days, and 1 month after application of orthodontic force. Distalized tooth movement was evaluated by measuring the difference on dental casts at baseline and 1 month after force application. Results: Average concentration of leptin in GCF raises from baseline (T0) to 1 h after application of force (T1). There was a significant association of the overall average concentration of leptin with the degree of tooth movement (correlation coefficient = 0.625). Conclusion: There was a biphasic change in GCF leptin concentration and significant association between rates of tooth movement with GCF leptin concentration.
ABSTRACT
AIM: The study was conducted to assess the changes in bone density before and after performing accelerated orthodontic maxillary canine retraction by microosteoperforations (MOPs). MATERIALS AND METHODS: Forty patients (120 cone-beam computed tomography [CBCT] images) within the age group of 15 to 25 years undergoing fixed orthodontic treatment with bilateral maxillary first premolar extraction were enrolled in this study. The right and left sides of the maxillary jaw in the same patients were selected as experimental and control sites. To accelerate the tooth movement, MOPs were performed distal to the canine root in the extraction space under local anesthesia with a miniscrew. Thereafter, the maxillary canine retraction was initiated using a NiTi closed coil spring. The CBCT images were taken and evaluated at the following time intervals: 1 week before MOPs(T0);1 week after MOPs(T1);3 weeks after MOPs(T2). RESULTS: A statistically significant reduction in bone density was observed at the center of resistance of canine on the experimental site (after MOPs) at 1 week and 3 weeks (T0-T1 = 0.000,0.115; T1-T2 = 0.0025,0.0117), whereas a statistically non-significant difference was found 1 week before and 3 weeks later in the control group. CONCLUSION: Accelerated orthodontics by MOPscan result in a substantial reduction in bone density during canine retraction, leading to an increase in the tooth movement rate, hence lowering the overall orthodontic treatment time.
