ABSTRACT
A suppressed ion chromatography (IC) technique has been evaluated as a chemical monitoring tool for detecting major anions (F-, Cl-, NO3- and SO4(2-)) of condensed steam in geothermal power plants. It is shown that the suppressed IC technique provides a suitable means for preventing possible damage to generating equipment in the geothermal industry. An electrical conductivity detector (0.1 microS sensitivity) with an anion-exchange column (IonPac AS4A-SC), a micro-membrane suppressor (AMMS II), and an isocratic high-pressure pump system were successfully used for detecting low concentrations of inorganic anions. Method detection limits for the anions of interest were <0.184 mg/L. Details of the IC methodology as well as some experimental results obtained during its application for the chemical monitoring of geothermal steam pipes are also described.
Subject(s)
Chromatography, Ion Exchange/methods , Power Plants , Steam/analysis , Electric Conductivity , Reproducibility of Results , Sensitivity and SpecificityABSTRACT
Groundwaters originating from local and regional aquifers surrounding ash deposits produced by a coal-fired power plant were collected. These water samples were chemically analyzed for quantifying their heavy metal composition at trace levels. A highly sensitive analytical technique based on ion chromatography with a UV-Vis detector and under isocratic eluent flow-rate conditions was used. In order to quantify the major heavy metals (Pb, Cu, Cd, Co, Zn and Ni), three ionic separation column systems were evaluated: (1) a cationic column (HPIC-CS2, Dionex) tested with two eluents (10 mM oxalic acid-7.5 mM citric acid; and 40 mM D-tartaric acid-12 mM citric acid); (2) an anionic column (HPIC-AS4, Dionex) evaluated with 25 mM oxalic acid as eluent: and (3) a bifunctional ion-exchange column (Ionpac CS5, Dionex) which was also tested with two eluents (6 mM pyridine, 2,6-dicarboxylic acid; and 50 mM oxalic acid/95 mM lithium hydroxide). The lowest detection limits achieved with the Ionpac CS5 column and the 50 mM oxalic acid-95 mM lithium hydroxide eluent enabled the heavy metal analysis in groundwater samples to be reliably performed. Details of this comparative study, including the ion chromatography procedure selected and its application to heavy metal analysis of groundwater samples, are presented in this work.
Subject(s)
Chromatography, Ion Exchange/methods , Metals, Heavy/analysis , Reproducibility of Results , Sensitivity and Specificity , Spectrophotometry, UltravioletABSTRACT
An improved capillary electrophoresis (CE) method for quantifying rare-earth elements (REEs) in synthetic geochemical standards was developed. Synthetic standard solutions were obtained from high purity metal oxides. The separation of REE total group (lanthanum to lutetium) was defined as a primary objective. Special attention was also focused on the optimized separation of europium (Eu) and gadolinium (Gd) because in earlier applications they presented overlapping problems. Their separation and quantitative determinations are essential for geological applications. For the rapid separation of REEs in synthetic geochemical standards, the temperature of the separation device was optimized. An analysis temperature of 15 degrees C enabled both the rapid separation of REEs within 2 min and the overlapping problem of Eu-Gd to be resolved. The detection limits (<0.1 ng) and precision estimates (generally better than 5%) were found to be satisfactory for most geological applications.