ABSTRACT
Stoichiometric reduction reactions of two metal-organic frameworks (MOFs) by the solution reagents (M = Cr, Co) are described. The two MOFs contain clusters with Ti8O8 rings: Ti8O8(OH)4(bdc)6; bdc = terephthalate (MIL-125) and Ti8O8(OH)4(bdc-NH2)6; bdc-NH2 = 2-aminoterephthalate (NH2-MIL-125). The stoichiometry of the redox reactions was probed using solution NMR methods. The extent of reduction is greatly enhanced by the presence of Na+, which is incorporated into the bulk of the material. The roughly 1 : 1 stoichiometry of electrons and cations indicates that the storage of e- in the MOF is tightly coupled to a cation within the architecture, for charge balance.
ABSTRACT
Stoichiometric proton-coupled electron transfer (PCET) reactions of the metal-organic framework (MOF) MIL-125, Ti8O8(OH)4(bdc)6 (bdc = terephthalate), are described. In the presence of UV light and 2-propanol, MIL-125 was photoreduced to a maximum of 2( e-/H+) per Ti8 node. This stoichiometry was shown by subsequent titration of the photoreduced material with the 2,4,6-tri- tert-butylphenoxyl radical. This reaction occurred by PCET to give the corresponding phenol and the original, oxidized MOF. The high level of charging, and the independence of charging amount with particle size of the MOF samples, shows that the MOF was photocharged throughout the bulk and not only at the surface. NMR studies showed that the product phenol is too large to fit in the pores, so the phenoxyl reaction must have occurred at the surface. Attempts to oxidize photoreduced MIL-125 with pure electron acceptors resulted in multiple products, underscoring the importance of removing e- and H+ together. Our results require that the e- and H+ stored within the MOF architecture must both be mobile to transfer to the surface for reaction. Analogous studies on the soluble cluster Ti8O8(OOC tBu)16 support the notion that reduction occurs at the Ti8 MOF nodes and furthermore that this reduction occurs via e-/H+ (H-atom) equivalents. The soluble cluster also suggests degradation pathways for the MOFs under extended irradiation. The methods described are a facile characterization technique to study redox-active materials and should be broadly applicable to, for example, porous materials like MOFs.
Subject(s)
Electrons , Metal-Organic Frameworks/chemistry , Protons , 2-Propanol/chemistry , Catalysis , Light , Metal-Organic Frameworks/radiation effects , Oxidation-Reduction , Phenols/chemistry , Surface PropertiesABSTRACT
The isoreticular analogue of the metal-organic framework UiO-66(Zr), synthesized with the flexible trans-1,4-cyclohexanedicarboxylic acid as linker, shows a peculiar breathing behavior by reversibly losing long-range crystalline order upon evacuation. The underlying flexibility is attributed to a concerted conformational contraction of up to two thirds of the linkers, which breaks the local lattice symmetry. X-ray scattering data are described well by a nanodomain model in which differently oriented tetragonal-type distortions propagate over about 7-10 unit cells.
ABSTRACT
Mixed-matrix membranes (MMMs) composed of polyimide (PI) and metal-organic frameworks (MOFs) were synthesized using Matrimid as the polymer and zirconium terephthalate UiO-66 as the filler. The modulation approach, combined with the use of amine-functionalized linkers, was used for synthesis of the MOF fillers in order to enhance the intrinsic separation performance of the MOF and improve the particle-PI compatibility. The presence of amine groups on the MOF outer surface introduced either through the linker, through the modulator, or through both led to covalent linking between the fillers and Matrimid, which resulted in very stable membranes. In addition, the presence of amine groups inside the pores of the MOFs and the presence of linker vacancies inside the MOFs positively influenced CO2 transport. MMMs with 30 wt % loading showed excellent separation performance for CO2/CH4 mixtures. A significant increase in the mixed-gas selectivity (47.7) and permeability (19.4 barrer) compared to the unfilled Matrimid membrane (i.e., 50% more selective and 540% more permeable) was thus achieved for the MMM containing the MOF prepared from 2-aminoterephthalic acid and 4-aminobenzoic acid, respectively used as the linker and as the modulator.
ABSTRACT
The isolation and separation of phenolic compounds from aqueous backgrounds is challenging and will gain in importance as we become more dependent on phenolics from lignocellulose-derived bio-oil to meet our needs for aromatic compounds. Herein, we show that highly stable and hydrophobic Zr metal-organic frameworks of the MIL-140 type are effective adsorbent materials for the separation of different phenolics and far outperform other classes of porous solids (silica, zeolites, carbons). The mechanism of the hydroquinone-catechol separation on MIL-140C was studied in detail by combining experimental results with computational techniques. Although the differences in adsorption enthalpy between catechol and hydroquinone are negligible, the selective uptake of catechol in MIL-140C is explained by its dense π-π stacking in the pores. The interplay of enthalpic and entropic effects allowed separation of a complex, five-compound phenol mixture through breakthrough over a MIL-140C column. Unlike many other metal-organic frameworks, MIL-140C is remarkably stable and maintained structure, porosity and performance after five adsorption-desorption cycles.
Subject(s)
Hydrophobic and Hydrophilic Interactions , Organometallic Compounds/chemistry , Phenols/chemistry , Phenols/isolation & purification , Adsorption , Drug Stability , Models, Molecular , Molecular Conformation , Water/chemistry , Zinc Oxide/chemistry , Zirconium/chemistryABSTRACT
The synthesis of titanium-carboxylate metal-organic frameworks (MOFs) is hampered by the high reactivity of the commonly employed alkoxide precursors. Herein, we present an innovative approach to titanium-based MOFs by the use of titanocene dichloride to synthesize COK-69, the first breathing Tiâ MOF, which is built up from trans-1,4-cyclohexanedicarboxylate linkers and an unprecedented [Ti(IV)3(µ3-O)(O)2(COO)6] cluster. The photoactive properties of COK-69 were investigated in depth by proton-coupled electron-transfer experiments, which revealed that up to one Ti(IV) center per cluster can be photoreduced to Ti(III) while preserving the structural integrity of the framework. The electronic structure of COK-69 was determined by molecular modeling, and a band gap of 3.77 eV was found.
ABSTRACT
We report the first zirconium metal-organic framework based on squaric acid, representing the member with the smallest unit cell in the isoreticular UiO-66 family. Its molecular sieving properties are strongly influenced by the monocarboxylic acid modulator incorporated during synthesis.
ABSTRACT
Herein, a new group of visible light photocatalysts is described. Iron(III) oxides could be promising visible light photocatalysts because of their small band gap enabling visible light excitation. However, the high electron-hole recombination rate limits the yield of highly oxidizing species. This can be overcome by reducing the particle dimensions. In this study, metal-organic frameworks (MOFs), containing Fe3-µ3-oxo clusters, are proposed as visible light photocatalysts. Their photocatalytic performance is tested and proven via the degradation of Rhodamine 6G in aqueous solution. For the first time, the remarkable photocatalytic efficiency of such Fe(III)-based MOFs under visible light illumination (350 up to 850 nm) is shown.
ABSTRACT
New single- and mixed-linker Cr-MIL-101 derivatives bearing different functional groups have been synthesized. The influence of the reaction parameters, such as metal source (CrO3, CrCl3, and Cr(NO3)3·9H2O) or linker composition, on product formation have been investigated using high-throughput methods. Highly crystalline Cr-MIL-101 materials were obtained with CrCl3 as the metal source with either 2-bromoterephthalic (TA-Br) or 2-nitroterephthalic (TA-NO2) acid as one of the mixed-linker components. On the basis of these results, numerous new mixed-linker Cr-MIL-101 derivatives containing -NH2, -NO2, -H, -SO3H, -Br, -OH, -CH3, and -COOH have been synthesized. The use of TA-NH2 and TA-OH were shown, under the same reaction conditions, to lead to decarboxylation and the formation of 3-amino- and 3-hydroxybenzoic acid, respectively. Furthermore, we were also able to directly synthesize single-linker Cr-MIL-101-X derivatives with X = F, Cl, Br, CH3. Postsynthetic modification was used to selectively reduce the mixed-linker compound Cr-MIL-101-Br-NO2 to Cr-MIL-101-Br-NH2. To establish the successful incorporation of the linker molecules and possible decomposition of certain starting materials, (1)H NMR spectra of dissolved reaction products were recorded.
ABSTRACT
The catalytic activity of the zirconium terephthalate UiO-66(Zr) can be drastically increased by using a modulation approach. The combined use of trifluoroacetic acid and HCl during the synthesis results in a highly crystalline material, with partial substitution of terephthalates by trifluoroacetate. Thermal activation of the material leads not only to dehydroxylation of the hexanuclear Zr cluster but also to post-synthetic removal of the trifluoroacetate groups, resulting in a more open framework with a large number of open sites. Consequently, the material is a highly active catalyst for several Lewis acid catalyzed reactions.
ABSTRACT
The influence of the metal ion in the mesoporous metal trimesate MIL-100(Al(3+), Cr(3+), Fe(3+), V(3+)) on the adsorptive removal of N/S-heterocyclic molecules from fuels has been investigated by combining isotherms for adsorption from a model fuel solution with microcalorimetric and IR spectroscopic characterizations. The results show a clear influence of the different metals (Al, Fe, Cr, V) on the affinity for the heterocyclic compounds, on the integral adsorption enthalpies, and on the uptake capacities. Among several factors, the availability of coordinatively unsaturated sites and the presence of basic sites next to the coordinative vacancies are important factors contributing to the observed affinity differences for N-heterocyclic compounds. These trends were deduced from IR spectroscopic observation of adsorbed indole molecules, which can be chemisorbed coordinatively or by formation of hydrogen bonded species. On the basis of our results we are able to propose an optimized adsorbent for the deep and selective removal of nitrogen contaminants out of fuel feeds, namely MIL-100(V).
Subject(s)
Aluminum/chemistry , Fossil Fuels , Heterocyclic Compounds/isolation & purification , Iron/chemistry , Metals/chemistry , Organometallic Compounds/chemistry , Vanadium/chemistry , Heterocyclic Compounds/chemistry , Ions/chemistry , Molecular Structure , Particle Size , Porosity , Surface PropertiesABSTRACT
Imperfections in the spotlight: fluorescence microscopy was used to detect defects in metal-organic frameworks formed during synthesis. In contrast to currently available techniques, confocal fluorescence microscopy offers the advantage of three-dimensional imaging at the single-crystal level combined with the sensitivity required to study the start of defect formation.
ABSTRACT
The low coverage adsorptive properties of the MIL-47 metal organic framework toward aromatic and heterocyclic molecules are reported in this paper. The effect of molecular functionality and size on Henry adsorption constants and adsorption enthalpies of alkyl and heteroatom functionalized benzene derivates and heterocyclic molecules was studied using pulse gas chromatography. By means of statistical analysis, experimental data was analyzed and modeled using principal component analysis and partial least-squares regression. Structure-property relationships were established, revealing and confirming several trends. Among the molecular properties governing the adsorption process, vapor pressure, mean polarizability, and dipole moment play a determining role.
Subject(s)
Heterocyclic Compounds/chemistry , Hydrocarbons, Aromatic/chemistry , Organometallic Compounds/chemistry , Adsorption , Chromatography, Gas , Molecular Structure , Surface PropertiesABSTRACT
In this work, the theory presented in part 1 (van der Veen, M. A.; Vermoortele, F.; De Vos, D. E.; Verbiest, T. Anal. Chem. 2012, DOI: 10.1021/ac300936q) for determination of the point groups symmetry based on easily distinguishable observables present in simple polarization dependent tests in second harmonic generation microscopy is tested. It is shown experimentally that the methodology can be applied for point group symmetry determination for a variety of structures among which molecular crystals and host/guest systems where the symmetry of the guest molecules cannot be inferred from conventional diffraction methods. Uniquely, this second-harmonic generation based method can discriminate between chiral and achiral structures regardless of their orientation. The method allows for in situ and in vivo studies with spatial resolution.
ABSTRACT
We present a methodology based on polarization-controlled second-harmonic generation microscopy that allows one to determine the point group symmetry of noncentrosymmetric structures in situ and in vivo in complex systems regardless of the occurrence of periodicity. Small, randomly oriented structures suffice for the analysis, which is based on simple recognition of observables in four tests. These can be performed in any standard SHG-microscope that allows polarization control of the incident and detected light. The method is resilient to birefringence and light dispersion.
ABSTRACT
Functionalized linkers can greatly increase the activity of metal-organic framework (MOF) catalysts with coordinatively unsaturated sites. A clear linear free-energy relationship (LFER) was found between Hammett σ(m) values of the linker substituents X and the rate k(X) of a carbonyl-ene reaction. This is the first LFER ever observed for MOF catalysts. A 56-fold increase in rate was found when the substituent is a nitro group.
ABSTRACT
We report a one-step photocatalytic synthesis method of dendritic silver nanostructures. These self-organised structures show an excellent Raman enhancement enabling the detection of analytes from dilute solutions by surface-enhanced Raman spectroscopy.
Subject(s)
Dendrimers/chemical synthesis , Metal Nanoparticles/chemistry , Silver/chemistry , Catalysis , Dendrimers/chemistry , Photochemical Processes , Spectrum Analysis, RamanABSTRACT
Para-disubstituted alkylaromatics such as p-xylene are preferentially adsorbed from an isomer mixture on three isostructural metal-organic frameworks: MIL-125(Ti) ([Ti(8)O(8)(OH)(4)(BDC)(6)]), MIL-125(Ti)-NH(2) ([Ti(8)O(8)(OH)(4)(BDC-NH(2))(6)]), and CAU-1(Al)-NH(2) ([Al(8)(OH)(4)(OCH(3))(8)(BDC-NH(2))(6)]) (BDC = 1,4-benzenedicarboxylate). Their unique structure contains octahedral cages, which can separate molecules on the basis of differences in packing and interaction with the pore walls, as well as smaller tetrahedral cages, which are capable of separating molecules by molecular sieving. These experimental data are in line with predictions by molecular simulations. Additional adsorption and microcalorimetric experiments provide insight in the complementary role of the two cage types in providing the para selectivity.