ABSTRACT
Concentrated bitterns discharged from saltworks have extremely high salinity, often up to 300 g/L, thus their direct disposal not only has a harmful effect on the environment, but also generates a depletion of a potential resource of renewable energy. Here, reverse electrodialysis (RED), an emerging electrochemical membrane process, is proposed to capture and convert the salinity gradient power (SGP) intrinsically conveyed by these bitterns also aiming at the reduction of concentrated salty water disposal. A laboratory-scale RED unit has been adopted to study the SGP potential of such brines, testing ion exchange membranes from different suppliers and under different operating conditions. Membranes supplied by Fujifilm, Fumatech, and Suez were tested, and the results were compared. The unit was fed with synthetic hypersaline solution mimicking the concentration of natural bitterns (5 mol/L of NaCl) on one side, and with variable concentration of NaCl dilute solutions (0.01-0.1 mol/L) on the other. The influence of several operating parameters has also been assessed, including solutions flowrate and temperature. Increasing feed solutions' temperature and velocity has been found to lower the stack resistance, which enhances the output performance of the RED stack. The maximum obtained power density (corrected to account for the effect of electrodic compartments, which can be very relevant in five cell pairs laboratory stacks) reached around 10.5 W/m2cellpair, with FUJIFILM Type 10 membranes, temperature of 40 °C, and a fluid velocity of 3 cm s-1 (as empty channel, considering 270 µm thickness). Notably, the present study results confirm the large potential for SGP generation from hypersaline brines, thus providing useful guidance for the harvesting of SGP in seawater saltworks all around the world.
ABSTRACT
The continuous depletion of minerals caused by land mining and the increase in their demand have pushed the development of novel sustainable technological processes for mineral recovery from unconventional sources. In this context, magnesium (Mg) has gained considerable attention for its peculiar properties and high relevance of its compounds, such as magnesium hydroxide, Mg(OH)2. In the present work, the influence of several operating conditions on the Mg(OH)2 precipitation process was thoroughly investigated by adopting a novel multiple feed-plug flow reactor. The influence of (i) initial Mg2+ concentrations in the feed stream; (ii) brine and alkaline flow rates; and (iii) the product recycling strategy (seeded crystallization) was considered. The results marked the possibility of improving sedimentation and filterability properties of Mg(OH)2 suspensions by adopting the recycling strategy to overcome industrial issues associated with the production of Mg(OH)2 suspensions using NaOH solutions.
ABSTRACT
Structural and metabolic imaging are fundamental for diagnosis, treatment and follow-up in oncology. Beyond the well-established diagnostic imaging applications, ultrasounds are currently emerging in the clinical practice as a noninvasive technology for therapy. Indeed, the sound waves can be used to increase the temperature inside the target solid tumors, leading to apoptosis or necrosis of neoplastic tissues. The Magnetic resonance-guided focused ultrasound surgery (MRgFUS) technology represents a valid application of this ultrasound property, mainly used in oncology and neurology. In this paper; patient safety during MRgFUS treatments was investigated by a series of experiments in a tissue-mimicking phantom and performing ex vivo skin samples, to promptly identify unwanted temperature rises. The acquired MR images, used to evaluate the temperature in the treated areas, were analyzed to compare classical proton resonance frequency (PRF) shift techniques and referenceless thermometry methods to accurately assess the temperature variations. We exploited radial basis function (RBF) neural networks for referenceless thermometry and compared the results against interferometric optical fiber measurements. The experimental measurements were obtained using a set of interferometric optical fibers aimed at quantifying temperature variations directly in the sonication areas. The temperature increases during the treatment were not accurately detected by MRI-based referenceless thermometry methods, and more sensitive measurement systems, such as optical fibers, would be required. In-depth studies about these aspects are needed to monitor temperature and improve safety during MRgFUS treatments.
