ABSTRACT
Since lead is a highly toxic metal, it is necessary to detect its presence in different samples; unfortunately, analysis can be complicated if the samples contain concentrations below the detection limit of conventional analytical techniques. Solid phase extraction is a technique that allows the carrying out of a pre-concentration process and thus makes it easy to quantify analytes. This work studied the efficiency of sorption and preconcentration of lead utilizing polysulfone (PSf) fibers grafted with acrylic acid (AA). The best conditions for Pb(II) extraction were: pH 5, 0.1 mol L-1 of ionic strength, and 40 mg of sorbent (70% of removal). The sorbed Pb(II) was pre-concentrated by using an HNO3 solution and quantified using flame atomic absorption spectrometry. The described procedure was used to obtain a correlation curve between initial concentrations and those obtained after the preconcentration process. This curve and the developed methodology were applied to the determination of Pb(II) concentration in a water sample contained in a handmade glazed clay vessel. With the implementation of the developed method, it was possible to pre-concentrate and determine a leached Pb(II) concentration of 258 µg L-1.
ABSTRACT
Ternary quantum dots (QDs) are novel nanomaterials that can be used in chemical analysis due their unique physicochemical and spectroscopic properties. These properties are size-dependent and can be adjusted in the synthetic protocol modifying the reaction medium, time, source of heat, and the ligand used for stabilization. In the last decade, several spectroscopic methods have been developed for the analysis of organic and inorganic analytes in biological, drug, environmental, and food samples, in which different sensing schemes have been applied using ternary quantum dots. This review addresses the different synthetic approaches of ternary quantum dots, the sensing mechanisms involved in the analyte detection, and the predominant areas in which these nanomaterials are used.
ABSTRACT
A method using UV-Vis spectroscopy and multivariate tools for simultaneous determination of glucose and cholesterol was developed in this paper. The method is based on the development of the reaction between the analytes (cholesterol and glucose) and enzymatic reagents. The spectra were analyzed by partial least squares regression and artificial neural networks. The precision estimated between nominal and calculate concentration demonstrate that artificial neural network model was adequate to quantify both analytes in serum samples, since the % relative error obtained was in the interval from 5.1 to 8.3. The proposed model was applied to analyze blood serum samples, and the results are similar compared to those obtained employing the reference method.
ABSTRACT
In this work an electrochemical procedure for Cr(VI) flow based determination in tap water is presented. An AdCSV method was developed using a screen printed electrode modified with magnetic poly(1-allyl-3-methylimidazolium) chloride and the procedure does not require the addition of complexing agents in the solution unlike the methodologies reported so far for Cr(VI) determination. The flow based system is described and the control variables were studied in detail and optimized using a Taguchi parameters design. Under optimal conditions, the electrochemical sensor offered an excellent response to Cr(VI) and the limit of detection estimated from 3σ was 0.5⯵gâ¯L-1 (nâ¯=â¯3) allowing the analysis of tap water samples. The effect of interfering ions was also investigated below the maximum permissible limits for tap water according to Mexican standards. The presence of the magnetic particles on the sorbent allowed its easy modification on the electrode surface between each determination when removing the magnetic field placed in the wall-jet cell. Finally, the precision of the method was tested with tap water samples using standard addition method for Cr(VI) quantification and the accuracy was evaluated comparing the results with the dyphenylcarbazide method and by analyzing a certified water sample. The method shows good repeatability and reproducibility (%RSD less than 5%) making it feasible for Cr(VI) flow based determination and no significant difference is observed in the results obtained by both methods.
ABSTRACT
La gran evolución tecnológica de los nuevos marcapasos, con sus actuales indicaciones terapeútica y el aumento en la espectativa de vida de la población, han hecho que con relativa frecuencia los anestesiólogos nos veamos enfrentados en cirugía a pacientes con estos instrumentos. Es importante que el anestesiólogo general, sepa manejar esta situación, haciendo una correcta evaluación preoperatoria de la condición del paciente y el funcionamiento del marcapasos al igual que conozca los diferentes factores intraoperatorios que pueden interferir con su función. De esta forma se podrá brindar una mayor seguridad al paciente en cirugía, tomando las medidas preventivas necesarias y haciendo un adecuado manejo de los posibles problemas
Subject(s)
Humans , Anesthesia , Pacemaker, ArtificialABSTRACT
Señala generalidades de apertura de la reunión. Reune temas que tratan de la situación actual de Argentina en materia de política, economía, seguro nacional de salud, sector prestador de servicios médicos asistenciales, salud, saneamiento ambiental, producción de insumos y recursos humanos