Detection, quantification, and characterization of polystyrene microplastics and adsorbed bisphenol A contaminant using electroanalytical techniques.

The potential applications of electroanalytical techniques for the quantification and size characterization of nonelectroactive polystyrene microplastics is reported, in addition to characterizing the kinetics of adsorption of bisphenol A on these polystyrene microparticles. The individual adsorption events of very diluted polystyrene microparticles dispersions on glassy-carbon microelectrodes produce the blocking of the charge transfer of a mediator (ferrocene-methanol) thus decreasing the current of the recorded chronoamperogram in a stepwise manner. The magnitude of the current steps are in the order of pA values and can be related to the diameter of the plastic microparticles in the size range 0.1 to 10 µm. The frequency of the current steps in the domain time used (120 s) allows to quantify the number concentration of these microparticles in the range 0.005 to 0.500 pM. Electrochemical impedance spectroscopy confirms the adsorption of the polystyrene microplastics on carbon microelectrodes (and to a lesser extent on platinum microelectrodes) under the same experimental conditions as above. On the other hand, the adsorbed microplastics become concentrators of other pollutants found in the environment. The sensitive differential-pulse voltammetry determination of bisphenol A (linear range 0.80-15.00 µM; detection limit 0.24 µM) was used together with a simple separation procedure for studying the adsorption of bisphenol A on polystyrene microparticles. The adsorption capacity (mg of bisphenol A retained per g of the polystyrene microplastics) decreased from approximately 5.7 to 0.8 mg g-1 with increasing dosages of polystyrene microparticles from 0.2 to 1.6 g l-1. The adsorption isotherms were modeled resulting in a monolayer of bisphenol A adsorbed on the microplastics (i.e., best fitted to a Langmuir model).

Analytical applications of single particle inductively coupled plasma mass spectrometry: a comprehensive and critical review.

Single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) refers to the use of ICP-MS as a particle counting technique. When ICP-MS measurements are performed at very high data acquisition frequencies, information about (nano)particles containing specific elements and their dissolved forms can be obtained (element mass per particle, size and number and mass concentrations). As a result of its outstanding performance, SP-ICP-MS has become a relevant technique for the analysis of complex samples containing inorganic nanoparticles. This review discusses the maturity level achieved by the technique through the methods developed for the detection, characterisation and quantification of engineered and natural (nano)particles. The application of these methods in different analytical scenarios is comprehensively reviewed and critically discussed, with special attention to their current technical and metrological limitations. The emergent applications of SP-ICP-MS in the field of nanoparticle-tagged immunoassay and hybridization methods are also reviewed.

Doppler de arteria umbilical en fetos con síndrome de Down / Umbilical artery Doppler in fetuses with Down syndrome

INTRODUCCIÓN: La aneuploidía más común entre los recién nacidos vivos es el síndrome de Down (SD). En estos niños el crecimiento está disminuido, con una frecuencia del 25% de restricción del crecimiento intrauterino, pero no se ha establecido el papel de la insuficiencia placentaria. El objetivo es estudiar la resistencia placentaria a través del Doppler de arteria umbilical con índice de pulsatilidad (IP) y el tiempo medio de desaceleración (t/2), y el posible efecto de la insuficiencia placentaria en fetos con SD. MÉTODO: Se realizó Doppler en la arteria umbilical en 78 fetos con SD, se midieron el IP y el t/2, y se compararon los resultados con los pesos de nacimiento. RESULTADOS: Se estudiaron 78 fetos con SD con 214 mediciones Doppler. El t/2 y el IP estaban alterados en el 71,5% y el 65% de las mediciones, respectivamente. La incidencia de t/2 alterado aumenta con la edad gestacional desde un 28,6% a las 15-20 semanas hasta un 89,3% sobre las 36 semanas (p < 0,01); cifras similares se observan para el IP. La clasificación de los pesos fue: 64% adecuados, 12% grandes y 24% pequeños para la edad gestacional. La última medición de t/2 antes del parto era normal en el 17% y estaba alterada en el 83%. En el caso del IP, los valores fueron normales en el 27% y anormales en el 73%. El peso de nacimiento, la edad gestacional y el porcentaje de niños adecuados para la edad gestacional eran significativamente mayores en el grupo con Doppler normal que en el grupo con Doppler alterado. El z-score del t/2 estaba marcadamente alterado (−2.23), pero el del peso de nacimiento solo estaba algo disminuido (−0,39). La mortalidad perinatal fue del 10%, significativamente mayor cuando el flujo diastólico era ausente o reverso. CONCLUSIONES: El estudio demuestra que los fetos con SD tienen una alta incidencia de alteración del Doppler umbilical para el IP y el t/2, lo cual sugiere una insuficiencia placentaria grave. Este deterioro parece iniciarse hacia el final del segundo trimestre y aumenta con la edad gestacional. Sin embargo, en estos fetos, la insuficiencia placentaria produce una ligera caída en el crecimiento fetal. Como hipótesis general pensamos que en los fetos con SD hay datos claros de insuficiencia placentaria, pero habría algún factor que les protegería de una restricción grave del crecimiento.

INTRODUCTION: The most common aneuploidy in live newborns is Down syndrome (DS), in these children growth is decreased, with a frequency of 25-36% of fetal growth restriction (FGR); however, it is not established the role of placental insufficiency. The objective is to study the Doppler of the umbilical artery with pulsatility index (PI) and half peak systolic velocity (hPSV) deceleration time and the possible role of placental insufficiency in fetuses with DS. METHOD: Doppler was performed in fetuses with DS, the umbilical artery and IP and hPSV were measured, and the results were compared with birth weights. RESULTS: 78 fetuses with DS were studied with 214 Doppler measurements. hPSV and the IP were altered in 71.5% and 65% of the measurements; the incidence of abnormal hPSV increases with gestational age from 28.6% between 15 to 20 weeks, to 89.3% over 36 weeks (p < 0.01), similar figures are observed with respect to the PI. The weight classification was: 24% of FGR, 12% of great for age and 64% of adequate for gestational age (AGA). The last measurement of hPSV before delivery was normal in 17% of the fetuses and was abnormal in 83%, in the case of PI the normal and abnormal values were 27 and 73%, respectively. Birth weight, gestational age, and the percentage of AGA children were significantly higher in the normal Doppler group than in the abnormal Doppler group. The hPSV z-score was markedly altered (−2.23), but the birth weight z-score is slightly decreased (−0.39). Perinatal mortality is 10% and is significantly higher when diastolic flow is absent or reverse. CONCLUSIONS: The study shows that DS fetuses have a high incidence of abnormal umbilical Doppler measured with IP and hPSV, which suggests severe placental insufficiency, this deterioration seems to start towards the end of the second trimester and increases with gestational age. However, in these fetuses, placental insufficiency causes a discrete drop in fetal growth. As a general hypothesis, we think that there is clear evidence of placental insufficiency in fetuses with DS, but there would be some factor that would protect these fetuses from severe growth restriction.

Glucodensities: A new representation of glucose profiles using distributional data analysis.

Biosensor data have the potential to improve disease control and detection. However, the analysis of these data under free-living conditions is not feasible with current statistical techniques. To address this challenge, we introduce a new functional representation of biosensor data, termed the glucodensity, together with a data analysis framework based on distances between them. The new data analysis procedure is illustrated through an application in diabetes with continuous-time glucose monitoring (CGM) data. In this domain, we show marked improvement with respect to state-of-the-art analysis methods. In particular, our findings demonstrate that (i) the glucodensity possesses an extraordinary clinical sensitivity to capture the typical biomarkers used in the standard clinical practice in diabetes; (ii) previous biomarkers cannot accurately predict glucodensity, so that the latter is a richer source of information and; (iii) the glucodensity is a natural generalization of the time in range metric, this being the gold standard in the handling of CGM data. Furthermore, the new method overcomes many of the drawbacks of time in range metrics and provides more in-depth insight into assessing glucose metabolism.

Electronic Communication in Binuclear Osmium- and Iridium-Polyhydrides.

Reactions of polyhydrides OsH6(PiPr3)2 (1) and IrH5(PiPr3)2 (2) with rollover cyclometalated hydride complexes have been investigated in order to explore the influence of a metal center on the MHn unit of the other in mixed valence binuclear polyhydrides. Hexahydride 1 activates an ortho-CH bond of the heterocyclic moiety of the trihydride metal-ligand compounds OsH3{κ2-C,N-[C5RH2N-py]}(PiPr3)2 (R = H (3), Me (4), Ph (5)). Reactions of 3 and 4 lead to the hexahydrides (PiPr3)2H3Os{µ-[κ2-C,N-[C5RH2N-C5H3N]-N,C-κ2]}OsH3(PiPr3)2 (R = H (6), Me (7)), whereas 5 gives the pentahydride (PiPr3)2H3Os{µ-[κ2-C,N-[C5H3N-C5(C6H4)H2N]-C,N,C-κ3]}OsH2(PiPr3)2 (8). Pentahydride 2 promotes C-H bond activation of 3 and the iridium-dihydride IrH2{κ2-C,N-[C5H3N-py]}(PiPr3)2 (9) to afford the heterobinuclear pentahydride (PiPr3)2H3Os{µ-[κ2-C,N-[C5H3N-C5H3N]-N,C-κ2]}IrH2(PiPr3)2 (10) and the homobinuclear tetrahydride (PiPr3)2H2Ir{µ-[κ2-C,N-[C5H3N-C5H3N]-N,C-κ2]}IrH2(PiPr3)2 (11), respectively. Complexes 6-8 and 11 display HOMO delocalization throughout the metal-heterocycle-metal skeleton. Their sequential oxidation generates mono- and diradicals, which exhibit intervalence charge transfer transitions. This notable ability allows the tuning of the strength of the hydrogen-hydrogen and metal-hydrogen interactions within the MHn units.

Detection, size characterization and quantification of silver nanoparticles in consumer products by particle collision coulometry.

Silver nanoparticles (AgNPs) are widely used in industrial and consumer products owing to its antimicrobial nature and multiple applications. Consequently, their release into the environment is becoming a big concern because of their negative impacts on living organisms. In this work, AgNPs were detected at a potential of + 0.70 V vs. Ag/AgCl reference electrode, characterized, and quantified in consumer products by particle collision coulometry (PCC). The electrochemical results were compared with those measured with electron microscopy and single-particle inductively coupled plasma mass spectrometry. The theoretical and practical peculiarities of the application of PCC technique in the characterization of AgNPs were studied. Reproducible size distributions of the AgNPs were measured in a range 10-100 nm diameters. A power allometric function model was found between the frequency of the AgNPs collisions onto the electrode surface and the number concentration of nanoparticles up to a silver concentration of 1010 L-1 (ca. 25 ng L-1 for 10 nm AgNPs). A linear relationship between the number of collisions and the number concentration of silver nanoparticles was observed up to 5 × 107 L-1. The PCC method was applied to the quantification and size determination of the AgNPs in three-silver containing consumer products (a natural antibiotic and two food supplements). The mean of the size distributions (of the order 10-20 nm diameters) agrees with those measured by electron microscopy. The areas of current spikes from the chronoamperogram allow the rapid calculation of size distributions of AgNPs that impact onto the working electrode.

Voltammetric sensing of silver nanoparticles on electrodes modified with selective ligands by using covalent and electropolymerization procedures. Discrimination between silver(I) and metallic silver.

New electrochemical sensors are described for the rapid quantification of silver nanoparticles (AgNPs). They are based on the immobilization of L-cysteine on a glassy carbon electrode (GCE) and on the formation of electropolymerized oligomers on the GCE. Ligands with amino, sulfur and carboxy functional groups are used that are capable of selectively retaining AgNPs. The experimental conditions for electropolymerizations were optimized for each of four monomers studied: L-lysine, thiophene-3-carboxamide, thionin, and o-phenylene-diamine. The best retention capabilities and conditions for quantification of AgNPs were found for immobilized nanoparticle voltammetry. This method is more sensitive than others based on the sorption of AgNPs from dispersions. These ligands also retain ionic silver species. Hence, Ag(I) and Ag0 can be discriminated, and the total silver content can be quantified by stripping voltammetry. The best analytical properties (for dispersions of AgNPs of 40 nm diameter) were found with GCEs carrying electropolymerized L-lysine. Figures of merit include (a) sensitivity of 4.329 ± 0.031 µA µg-1 mL cm-2, (b) a detection limit of 0.010 µg mL-1, and (c) a relative standars deviation of about 7.2% (for n = 4). The poly-L-lysine sensors can also evaluate the size of the AgNPs in the range 20 to 80 nm diameter, owing to displacements of the maximum potential of the voltammetry peaks. Graphical abstractSchematic representation of the quantification of silver nanoparticles (AgNPs) with a glassy-carbon electrode (GCE) modified with electropolymerized poly(L-lysine). AgNPs (and Ag+ ions) are selectively preconcentrated in the polymer and determined by differential-pulse stripping voltammetry.

A rapid magnetic particle-based enzyme immunoassay for human cytomegalovirus glycoprotein B quantification.

Human cytomegalovirus (HCMV) is a herpes virus that can cause severe infections. Still, the available methods for its diagnostic have the main disadvantage of requiring long time to be performed. In this work, a simple magnetic particle-based enzyme immunoassay (mpEIA) for the quantification of glycoprotein B of Human cytomegalovirus (gB-HCMV) in urine samples is proposed. The immunosensor scheme is based on the analyte protein gB-HCMV sandwiched between a primary monoclonal antibody, (MBs-PrG-mAb1), and a secondary anti-gB-HCMV antibody labelled with Horseradish peroxidase (Ab2-HRP) to allow spectrophotometric detection. The mpEIA analytical performance was tested in urine samples, showing a linear dependence between gB-HCMV concentration and the absorbance signal at 450 nm in a range of concentrations from 90 to 700 pg mL-1. The calculated detection limits for gB-HCMV were 90 ±â€¯2 pg mL-1 and the RSD was about 6.7% in urine samples. The immunosensor showed good selectivity against other viruses from Herpesviridae family, namely varicella zoster and Epstein Barr viruses. The recoveries of spiked human urine samples at 0.30-0.50 ng mL-1 concentration levels of gB-HCMV ranged between 91 to 105%. The proposed mpEIA method was validated following the guidelines of the European Medicines Agency (EMEA-2014), and allows rapid, successful and easy quantification of gB-HCMV in urine samples.

A 6-minute sub-maximal run test to predict VO2 max.

Maximal oxygen uptake ([Formula: see text] max) is a key indicator to assess health as well as sports performance. Currently, maximal exercise testing is the most accurate measure of maximal aerobic power, since submaximal approaches are still imprecise. In this paper, we propose a new method to predict [Formula: see text] max from a submaximal, low intensity, test in sports men and women. 182 males and 108 females from the High Performance Center of Pontevedra (Spain), aged 10-46 years old, with a [Formula: see text] max between 30.1 and 81.2 mL·min-1·kg-1, completed a maximal incremental test to volitional exhaustion. The test began at a speed of 6 km·h-1 and increased by 0.25 km·h-1 every 15 seconds. Using the data gathered during the first 6 minutes of the test, two different regression models were adjusted using functional data analysis and a traditional linear regression model with scalar covariates. The functional regression model obtained the best results, adjusted r2 = 0.845 and RMSE = 2.8 mL·min-1·kg-1, but the linear regression model also obtained a good fit, adjusted r2 = 0.798 and RMSE = 3.5 mL·min-1·kg-1. Both methods are more accurate than classical submaximal tests, although oxygen consumption needs to be measured during the test.

Rapid determination of recent cocaine use with magnetic particles-based enzyme immunoassays in serum, saliva, and urine fluids.

Cocaine is one of the most worldwide used illicit drugs. We report a magnetic particles-based enzyme-linked immunoassay (mpEIA) method for the rapid and sensitive determination of cocaine (COC) in saliva, urine and serum samples. Under optimized conditions, the limits of detections were 0.09ngmL(-1) (urine), 0.15ngmL(-1) (saliva), and 0.06ngmL(-1) COC (human serum). Sensitivities were in the range EC50=0.6-2.5ngmL(-1) COC. The cross-reactivity with the principal metabolite benzoylecgonine (BZE) was only 1.6%. Recovering percentages of doped samples (0, 10, 50, and 100ngmL(-1) of COC) ranged from about 86-111%. Some advantages of the developed mpEIA over conventional ELISA kits are faster incubations, improved reproducibility, and consumption of lower amounts of antibody and enzyme conjugates due to the use of magnetic beads. The reported method was validated following the guidelines on bioanalytical methods of the European Medicines Agency (2011). Unmetabolized COC detection has a great interest in pharmacological, pharmacokinetics, and toxicokinetics studies, and can be used to detect a very recent COC use (1-6h).

Electrochemical affinity biosensors for detection of mycotoxins: A review.

This review discusses the current state of electrochemical biosensors in the determination of mycotoxins in foods. Mycotoxins are highly toxic secondary metabolites produced by molds. The acute toxicity of these results in serious human and animal health problems, although it has been only since early 1960s when the first studied aflatoxins were found to be carcinogenic. Mycotoxins affect a broad range of agricultural products, most important cereals and cereal-based foods. A majority of countries, mentioning especially the European Union, have established preventive programs to control contamination and strict laws of the permitted levels in foods. Official methods of analysis of mycotoxins normally requires sophisticated instrumentation, e.g. liquid chromatography with fluorescence or mass detectors, combined with extraction procedures for sample preparation. For about sixteen years, the use of simpler and faster analytical procedures based on affinity biosensors has emerged in scientific literature as a very promising alternative, particularly electrochemical (i.e., amperometric, impedance, potentiometric or conductimetric) affinity biosensors due to their simplicity and sensitivity. Typically, electrochemical biosensors for mycotoxins use specific antibodies or aptamers as affinity ligands, although recombinant antibodies, artificial receptors and molecular imprinted polymers show potential utility. This article deals with recent advances in electrochemical affinity biosensors for mycotoxins and covers complete literature from the first reports about sixteen years ago.

An electrochemical immunosensor for ochratoxin A determination in wines based on a monoclonal antibody and paramagnetic microbeads.

We report a direct competitive immunosensor for the rapid determination of ochratoxin A (OTA) in wine samples. Magnetic beads (1 ± 0.5 µm diameter) covered with streptavidin were functionalized with a monoclonal antibody against OTA, and then left to incubate in a solution of tracer (ochratoxin conjugated to the enzyme peroxidase) and a range of OTA concentrations (10(-4) to 1,000 ng mL(-1)). After washing and separation steps helped with a magnetic field, a volume of the dispersion was put on screen-printed electrodes under a magnet, and after adding the substrate the p-benzoquinone generated enzymatically was detected by differential-pulse voltammetry. Wine samples (2 mL) were easily prepared simply by adjusting to pH = 7.5 with diluted NaOH and by adding polyvinylpyrrolidone for complexing polyphenols, without any other clean-up or preconcentration steps. The limit of detection for detecting OTA in wines was of 0.11 ± 0.01 ng L(-1), well below the permitted content of the mycotoxin by the European Union (<2 ng mL(-1)). Spiked wines were subjected to immunosensor calibrations to study the matrix effects. OTA concentrations measured with the immunosensor were compared with those obtained by high-performance liquid chromatography coupled to fluorescence detection (AOAC official method 2001.01). The OTA levels from two red wines of "Campo de Borja", Spain, ranged from about 0.027 to 0.033 ng mL(-1) of OTA.

An electrochemical competitive biosensor for ochratoxin A based on a DNA biotinylated aptamer.

Ochratoxin A (OTA) is one of the most important mycotoxin contaminants of foods, particularly cereals and cereal products, with strict low regulatory levels (of ppb) in many countries worldwide. An electrochemical competitive aptamer-based biosensor for OTA is described. Paramagnetic microparticle beads (MBs) were functionalized with an aptamer specific to OTA, and were allowed to compete with a solution of the mycotoxin conjugated to the enzyme horseradish peroxidase (OTA-HRP) and free OTA. After separation and washing steps helped with magnetic separations, the modified MBs were localized on disposable screen-printed carbon electrodes (SPCEs) under a magnetic field, and the product of the enzymatic reaction with the substrate was detected with differential-pulse voltammetry. In addition to magnetic separation assays, other competitive schemes (direct/indirect aptasensors performed on the SPCEs surface or using gold nanoparticles functionalized with the aptamer) were preliminary tested, optimized and compared. The magnetic aptasensor showed a linear response to OTA in the range 0.78-8.74 ng mL(-1) and a limit of detection of 0.07±0.01 ng mL(-1), and was accurately applied to extracts of certified and spiked wheat samples with an RSD lower than about 8%.

A comparative study of immobilization methods of a tyrosinase enzyme on electrodes and their application to the detection of dichlorvos organophosphorus insecticide.

The use of several designs of amperometric enzymatic biosensors based on the immobilized tyrosinase enzyme (Tyr) for determining dichlorvos organophosphate pesticide are described. The biosensors are based on the reversible inhibition of the enzyme and the chronocoulometric measurement of the charge due to the charge-transfer mediator 1,2-naphthoquinone-4-sulfonate (NQS). Tyr becomes active when reducing the quinone form of the mediator molecule (NQS) to the reactive o-diol form substrate of Tyr (H(2)NQS) at the working electrode, thus permitting modulation of the catalytic activity of the enzyme and measurement of the inhibition produced by the pesticide. The full activity of the enzyme reversibly recovers after removal of the pesticide and re-oxidation of H(2)NQS. Tyr was immobilized onto electrodes using different procedures: (i) entrapment within electropolymerized conducting and non-conducting polymers, (ii) covalent attachment to self-assembled monolayers (SAM), (iii) cross-linking with glutaraldehyde (and nafion covering) and (iv) dispersion within carbon-paste electrodes. The mediator was co-immobilized onto the working electrode next to the enzyme and reagentless biosensors were subsequently constructed. In the SAM design (ii) NQS was added to the solution. The analytical properties of the different biosensors based on the competitive inhibition produced by dichlorvos were then compared. A detection limit of about 0.06 microM was obtained for dichlorvos with entrapment of NQS and Tyr within electropolymerized poly(o-phenylenediamine) polymer (oPPD), which was the design that proved to have the best analytical performance.

Amperometric cholesterol biosensor based on in situ reconstituted cholesterol oxidase on an immobilized monolayer of flavin adenine dinucleotide cofactor.

A new amperometric biosensor for determining cholesterol based on deflavination of the enzyme cholesterol oxidase (ChOx) and subsequent reconstitution of the apo-protein with a complexed flavin adenine dinucleotide (FAD) monolayer is described. The charge transfer mediator pyrroquinoline quinone (PQQ) was covalently bound to a cystamine self-assembled monolayer (SAM) on an Au electrode. Boronic acid (BA) was then bound to PQQ using the carbodiimide procedure, and the BA ligand was complexed to the FAD molecules on which the apo-ChOx was subsequently reconstituted. The effective release of the FAD from the enzyme and the successful reconstitution were verified using molecular fluorescence and cyclic voltammetry. The optimal orientation of FAD toward the PQQ mediator and the distances between FAD and PQQ and between PQQ and electrode enhance the charge transfer, very high sensitivity (about 2,500 nAmM(-1)cm(-2)) being obtained for cholesterol determination. The biosensor is selective toward electroactive interferents (ascorbic acid and uric acid) and was tested in reference serum samples, demonstrating excellent accuracy (relative errors below 3% in all cases). The biosensor activity can be successfully regenerated in a simple process by successive reconstitution with batches of recently prepared apo-ChOx on the same immobilized Au/SAM-PQQ-BA-FAD monolayer (it was tested five times); the lifetime of the biosensor is about 45-60 days.

Amperometric cholesterol biosensors based on the electropolymerization of pyrrole and the electrocatalytic effect of Prussian-Blue layers helped with self-assembled monolayers.

Three cholesterol biosensor configurations based on the formation of a layer of Prussian-Blue (PB) on a Pt electrode for the electrocatalytic detection of the H(2)O(2) generated during the enzymatic reaction of cholesterol with cholesterol oxidase (ChOx) were constructed. The enzyme was entrapped within a polypyrrole (PPy) layer electropolymerized onto the PB film. The influence of the formation of self-assembled monolayers (SAMs) on the Pt surface on the adherence and stability of the PB layer and the formation of an outer layer of nafion (Nf) as a means of improving selectivity were both studied. A comparative study was made of the analytical properties of the biosensors corresponding to the three configurations named: Pt/PB/PPy-ChOx, Pt/SAM/PB/PPy-ChOx and Pt/SAM/PB/PPy-ChOx/Nf. The sensitivity (from 600 to 8500nAmM(-1)cm(-2)) and selectivity of the developed biosensors permitted the determination of the cholesterol content in reference and synthetic serum samples. The detection limit for the Pt/SAM/PB/PPy-ChOx/Nf biosensor was 8muM. Formation of the SAM on the electrode surface and covering with a Nf film considerably improved the stability and lifetime of the biosensor based on the catalytic effect of the PB layer (as the PB layer was retained longer on the electrode), and the Nf layer protects the enzyme from the external flowing solutions. Lifetime is up to 25 days of use. The formation of the SAM also has an effect on the charge transfer and the formation of the PB layer.

Development of a platinized and ferrocene-mediated cholesterol amperometric biosensor based on electropolymerization of polypyrrole in a flow system.

The preparation of a cholesterol amperometric biosensor using a platinized Pt electrode as a support for the electropolymerization of a polypyrrole film, in which cholesterol oxidase and ferrocene monocarboxylic acid (electron-transfer mediator) were co-entrapped, is described. All the biosensor preparation steps (platinization and electropolymerization) and the cholesterol determination take place in the same flow system. The presence of the mediator enhances the sensitivity and selectivity of the platinized biosensor without modifying the dynamic parameters of the response, and the platinized layer improves the operational lifetime of the mediated sensor. The sensitivity obtained was 88.51 nA mM(-1) and the limit of detection was 12.4 microM of cholesterol. The analytical properties of the biosensor for the flow-injection determination of cholesterol were studied and compared with those of other more simple amperometric biosensor configurations.

Neutralizacion cruzada de veneno de bothrops jararacussu por sueros antiofidicos heterologo / Cross neutralization of bothrops jararacussu venom by heterologous antivenoms

En la Argentina se utilizan tres tipos de sueros antiofídicos frete a la mordedura de crotálidos, el Anticrotálico Monovalente, contra el veneno de Crotalus durissus terrifucus ("víbora de cascabel"), el Botrópico Bivalente y el Botrópico Tetravalente ("Misiones") contra los venenos de las diferentes especies de Bothrops que se encuentran en la Argentina (las diferentes "y"rará")" Además, existe un suero Botrópico-Crotálico (Trivalente) el cual cubriria el mismo espectro que el Bivalente más el Anticrotálico. En este trabajo estudiamos la reactividad inmunoquímica de los sueros antibotrópicos Bivalente y Tetravalente, del Botrópico Crotálico (Trivalente) y del Anticrotálico Monovalente con el veneno de Bothrops jararacussu ("yararacuzú", "tapete dourado"). Además, se estudió la capacidad neutralizante de estos antivenenos sobre la potencia letal, y las actividades hemorrágica, necrotizante, procoagulante y hemolítica indirecta del veneno de B. jararacussu. La potencia neutralizante sobre las actividades biológicas y tóxicas de este veneno por todos los antivenenos utilizados es similar a la obtenida con el suero antibotrópico tetravalente (homólogo). Estos resultados sugieren la posibilidad de emplear sueros antibotrópicos heterólogos en el tratamiento de los accidentes por B. jararacussu.

Neutralizacion cruzada de veneno de bothrops jararacussu por sueros antiofidicos heterologo / Cross neutralization of bothrops jararacussu venom by heterologous antivenoms

En la Argentina se utilizan tres tipos de sueros antiofídicos frete a la mordedura de crotálidos, el Anticrotálico Monovalente, contra el veneno de Crotalus durissus terrifucus ("víbora de cascabel"), el Botrópico Bivalente y el Botrópico Tetravalente ("Misiones") contra los venenos de las diferentes especies de Bothrops que se encuentran en la Argentina (las diferentes "y"rará")" Además, existe un suero Botrópico-Crotálico (Trivalente) el cual cubriria el mismo espectro que el Bivalente más el Anticrotálico. En este trabajo estudiamos la reactividad inmunoquímica de los sueros antibotrópicos Bivalente y Tetravalente, del Botrópico Crotálico (Trivalente) y del Anticrotálico Monovalente con el veneno de Bothrops jararacussu ("yararacuzú", "tapete dourado"). Además, se estudió la capacidad neutralizante de estos antivenenos sobre la potencia letal, y las actividades hemorrágica, necrotizante, procoagulante y hemolítica indirecta del veneno de B. jararacussu. La potencia neutralizante sobre las actividades biológicas y tóxicas de este veneno por todos los antivenenos utilizados es similar a la obtenida con el suero antibotrópico tetravalente (homólogo). Estos resultados sugieren la posibilidad de emplear sueros antibotrópicos heterólogos en el tratamiento de los accidentes por B. jararacussu. (AU)