Spectroscopic and photoluminescence characterization of Dy(3+) in Sr0.5Ca0.5TiO3 phosphor.

The spectroscopic and photoluminescence characteristics of trivalent dysprosium (Dy(3+))-doped Sr0.5Ca0.5TiO3 phosphor materials synthesized via solid-state reaction method were studied. The X-ray diffraction profile confirmed the orthorhombic perovskite structure of the prepared samples. Judd-Ofelt analysis was carried out to obtain the intensity parameters and predicted radiative properties of Sr0.5Ca0.5TiO3:2wt%Dy(3+). The photoluminescence spectrum of Dy(3+)-doped Sr0.5Ca0.5TiO3 showed three emission peaks at 481, 574 and 638 nm corresponding to (4)F9/2 →(6)H15/2, (4)F9/2 →(6)H13/2 and (4)F9/2 →(6)H11/2 transitions respectively. The variation of luminescence intensity with different excitation wavelengths and Dy(3+) concentrations is discussed. The decay profiles of (4)F9/2 excited levels of Dy(3+) ions show bi-exponential behaviour and also a decrease in average lifetime with increase in Dy(3+) concentration. Yellow to blue luminescence intensity ratio, CIE chromaticity co-ordinates and correlated color temperature were also calculated for different concentrations of Dy(3+)-doped Sr0.5Ca0.5TiO3 phosphor at different λex.

Synthesis and luminescence characterization of Sr(0.5)Ca(0.5)TiO3:Sm(3+) phosphor.

The spectroscopic properties of trivalent samarium doped Sr0.5Ca0.5TiO3 perovskite phosphor material (Sr0.5Ca0.5TiO3:xSm(3+), x=0.05, 0.1, 0.5, 1, 1.5) synthesized by the solid state method have been studied. The X-Ray Diffraction profile confirms the orthorhombic perovskite Sr0.5Ca0.5TiO3 structure of the prepared samples. The SEM study reveals the surface morphology. The Judd-Ofelt intensity parameters were calculated for 0.5 wt% Sm(3+) doped Sr0.5Ca0.5TiO3. Transition probabilities, branching ratios and radiative lifetime were evaluated by using Judd-Ofelt analysis. The emission spectra under 405 nm excitation shows five emission peaks at 564 nm, 599 nm, 645 nm, 707 nm and 776 nm corresponding to the transitions (4)G5/2→(6)Hj (j=5/2, 7/2, 9/2, 11/2 and 13/2) respectively. The higher values of branching ratio and stimulated emission cross-section for (4)G5/2→(6)H7/2 transition of Sr0.5Ca0.5TiO3:0.5 wt% Sm(3+) shows its suitability in the field of visible lasers and optical fiber amplifiers. The experimental lifetimes of Sm(3+) doped samples were estimated using the decay curves corresponding to (4)G5/2→(6)H7/2 transition upon 405 nm excitation. Concentration dependence on emission intensity and experimental lifetime were also studied. From the CIE diagram we can see that as the concentration of Sm(3+) ions increases from 0.05 wt% to 1.5 wt% the CIE color co-ordinates changes from greenish yellow to yellowish orange.

Synthesis and luminescence characterization of Pr(3+) doped Sr1.5Ca0.5SiO4 phosphor.

Luminescence properties of Pr(3+) activated Sr1.5Ca0.5SiO4 phosphors synthesized by solid state reaction method are reported in this work. Blue, orange red and red emissions were observed in the Pr(3+) doped sample under 444nm excitation and these emissions are assigned as (3)P0→(3)H4, (3)P0→(3)H6 and (3)P0→(3)F4 transitions. The emission intensity shows a maximum corresponding to the 0.5wt% Pr(3+) ion. The decay analysis was done for 0.05 and 0.5wt% Pr(3+) doped samples for the transition (3)P0→(3)H6. The life times of 0.05 and 0.5wt% Pr(3+) doped samples were calculated by fitting to exponential and non-exponential curve respectively, and are found to be 156 and 105µs respectively. The non-exponential behaviour arises due to the statistical distribution of the distances between the ground state Pr(3+) ions and excited state Pr(3+) ions, which cause the inhomogeneous energy transfer rate. The XRD spectrum confirmed the triclinic phase of the prepared phosphors. The compositions of the samples were determined by the energy dispersive X-ray spectra. From the SEM images it is observed that the particles are agglomerated and are irregularly shaped. IR absorption bands were assigned to different vibrational modes. The well resolved peaks shown in the absorption spectra are identical to the excitation spectra of the phosphor samples. Pr(3+) activated Sr1.5Ca0.5SiO4 phosphors can be efficiently excited with 444nm irradiation and emit multicolour visible emissions. From the CIE diagram it can be seen that the prepared phosphor samples give yellowish-green emission.