Robust, fast and sensitive near-infrared continuous-filtering Vernier spectrometer.

We present a new design of a robust cavity-enhanced frequency comb-based spectrometer operating under the continuous-filtering Vernier principle. The spectrometer is based on a compact femtosecond Er-doped fiber laser, a medium finesse cavity, a diffraction grating, a custom-made moving aperture, and two photodetectors. The new design removes the requirement for high-bandwidth active stabilization present in the previous implementations of the technique, and allows scan rates up to 100 Hz. We demonstrate the spectrometer performance over a wide spectral range by detecting CO2 around 1575 nm (1.7 THz bandwidth and 6 GHz resolution) and CH4 around 1650 nm (2.7 THz bandwidth and 13 GHz resolution). We achieve absorption sensitivity of 5 × 10-9 cm-1 Hz-1/2 at 1575 nm, and 1 × 10-7 cm-1 Hz-1/2 cm-1 at 1650 nm. We discuss the influence of the scanning speed above the adiabatic limit on the amplitude of the absorption signal.

Time-resolved continuous-filtering Vernier spectroscopy of H2O and OH radical in a flame.

We use broadband near-infrared continuous-filtering Vernier spectroscopy (CF-VS) for time-resolved detection of H2O and OH radical in a premixed CH4/air flat flame. The CF-VS spectrometer is based on a femtosecond Er:fiber laser, an external cavity that contains the flame, and a detection system comprising a rotating diffraction grating and photodetectors. Spectra of H2O and OH radical around 1570 nm are continuously recorded with 6.6 GHz spectral resolution, 4.0 × 10-7 cm-1 absorption sensitivity, and 25 ms time resolution, while the fuel-air equivalence ratio is periodically modulated with a square wave. The concentrations of the two analytes are retrieved with percent level precision by a fit of a Vernier model to each spectrum spanning 13 nm. The temporal profiles of both concentrations in each modulation cycle are repeatable and the steady-state concentration levels are in good agreement with predictions based on one-dimensional simulations of a static flat flame. The robust CF-VS spectrometer opens up for quantitative monitoring of multiple products of time-varying combustion processes with relatively simple data acquisition procedures.

Determination of cellulose crystallinity by terahertz-time domain spectroscopy.

Terahertz-time domain spectroscopy (THz-TDS) has the ability to probe the crystallinity of several materials, due to the interaction of THz radiation with optical phonons in crystal lattices. In this work, THz-TDS has been used to quantify the degree of crystallinity of microcrystalline cellulose (MCC) samples. The THz spectra of cellulose present absorption features which could be directly correlated with the crystallinity index (CI) obtained by means of the well-established powder X-ray diffraction (PXRD) technique. The effect of THz time-domain signal processing was investigated, and both univariate and multivariate, based on partial least-squares (PLS), regressions were carried out with the signal in the frequency domain to correlate the THz spectra with CI. Results show that the multivariate regression models based on spectral data, collected with the sample displaced from the focal plane of the THz optics to improve representativeness and measurement repeatability, present the best performance with external validation achieving an absolute root-mean-square error of prediction (RMSEP) of 4% for CI. This result compares well with the PXRD technique.

Near infrared emission photometer for measuring the oxidative stability of edible oils.

Near infrared emission spectroscopy (NIRES) allows the determination of the induction time (IT) of edible oils in accelerated oxidation experiments by monitoring the emissivity of a band at 2900 nm, which corresponds to the formation of hydroperoxides. In this work, a new near infrared emission photometer dedicated to the determination of oxidative stability is described. The photometer presents several advantages compared to the previously reported NIRES instrument, such as lower cost and extreme simplicity of design and maintenance. The results obtained in the evaluation of the proposed instrument were compared with the official Rancimat method and instrument. The significant advantages include: faster analysis, lower sample consumption and operational simplicity. It is demonstrated that the procedure for determination of oxidative stability of oils can be significantly simplified and performed by measuring the sample emission at only one spectral region centered at 2900 nm. Also, the proposed instrument and method present precision equivalent to the Rancimat method (coefficient of variation=5.0%). A significant correlation between the methods has been found (R(2)=0.81).

Interference energy in C-H and C-C bonds of saturated hydrocarbons: dependence on the type of chain and relationship to bond dissociation energy.

Interference energy for C-H and C-C bonds of a set of saturated hydrocarbons is calculated by the generalized product function energy partitioning (GPF-EP) method in order to investigate its sensitivity to the type of chain and also its contribution to the bond dissociation energy. All GPF groups corresponding to chemical bonds are calculated by use of GVB-PP wave functions to ensure the correct description of bond dissociation. The results show that the interference energies are practically the same for all the C-H bonds, presenting only small variations (0.5 kcal.mol(-1)) due to the structural changes in going from linear to branched and cyclic chains. A similar trend is verified for the C-C bonds, the sole exception being the cyclopropane molecule, for which only the C-C bond exhibits a more significant variation. On the other hand, although the interference energy is quantitatively the most important contribution to the bond dissociation energy (DE), one cannot predict DE only from the bond interference energy. Differences in the dissociation energies of C-C and C-H bonds due to structural changes in the saturated hydrocarbons can be mainly attributed to quasi-classical effects.