O2(X³Σg⁻) and O2(a¹Δg) charge exchange with simple ions.

We present theory and experiments which describe charge transfer from the X³Σg⁻ and a(1)Δg states of molecular oxygen and atomic and molecular cations. Included in this work are new experimental results for O2(a(1)Δg) and the cations O(+), CO(+), Ar(+), and N2⁺, and new theory based on complete active space self-consistent field method calculations and an extended Langevin model to calculate rate constants for ground and excited O2 reacting with the atomic ions Ar(+), Kr(+), Xe(+), Cl(+), and Br(+). The T-shaped orientation of the (X - O2)(+) potential surface is used for the calculations, including all the low lying states up to the second singlet state of the oxygen molecule b¹Σ(g)⁺. The calculated rate constants for both O2(X³Σg⁻) and O2(a(1)Δg) show consistent trends with the experimental results, with a significant dependence of rate constant on charge transfer exothermicity that does not depend strongly on the nature of the cation. The comparisons with theory show that partners with exothermicities of about 1 eV have stronger interactions with O2, leading to larger Langevin radii, and also that more of the electronic states are attractive rather than repulsive, leading to larger rate constants. Rate constants for charge transfer involving O2(a(1)Δg) are similar to those for O2(X³Σg⁻) for a given exothermicity ignoring the electronic excitation of the O2(a(1)Δg) state. This means (and the electronic structure calculations support) that the ground and excited states of O2 have about the same attractive interactions with ions.

Electron attachment to fluorocarbon radicals.

Thermal electron attachment rate constants for a series of small fluorocarbon radicals (CF(2), C(2)F(3), 1-C(3)F(7), 2-C(3)F(7), C(3)F(5), CF(3)O) were measured from 300 to 600 K using the variable electron and neutral density attachment mass spectrometry method. With the exception of CF(2), for which no attachment was observed, all species exclusively underwent dissociative attachment to yield F(-). The magnitude and temperature dependences of the rate constants varied significantly between species; however, attachment was in all cases inefficient, never exceeding 2% of the calculated collisional value. The data are interpreted and extrapolated to conditions inaccessible to the experiment using a kinetic modeling approach to the electron attachment process.

Electron attachment to 14 halogenated alkenes and alkanes, 300-600 K.

Thermal electron attachment to 14 alkenes and alkanes with bromine, fluorine, and iodine substituents has been studied over the temperature range 300-600 K using a flowing-afterglow Langmuir-probe apparatus. Rate coefficients and anion products are reported, most for the first time. Among these were 3 isomers of C(3)F(5)Br and the 2 isomers of C(3)F(7)I. Four dibromide compounds were studied, all of which yield Br(2)(-) product in addition to Br(-) product. The results are analyzed using a statistical kinetic modeling approach, which is able to reproduce both attachment rate coefficients and product branching ratios within experimental uncertainty. The kinetic modeling indicates that factor of 2 differences in attachment rate coefficients to the isomeric species can be explained by subtle variations in the potential surfaces.

Electron attachment to C7F14, thermal detachment from C7F14(-), the electron affinity of C7F14, and neutralization of C7F14(-) by Ar+.

Rate coefficients and branching fractions have been measured for electron attachment to perfluoromethylcyclohexane, C(7)F(14), along with thermal detachment rate coefficients for C(7)F(14)(-), from 300 to 630 K, using a flowing-afterglow Langmuir-probe apparatus. The attachment rate coefficient at room temperature is 4.5 ± 1.2 × 10(-8) cm(3) s(-1) and increases with temperature at a rate described by an activation energy of 50 ± 25 meV. Thermal electron detachment is negligible at room temperature, but measurable at 600 K and above, reaching 2300 ± 1300 s(-1) at 630 K. Analysis of the attachment-detachment equilibrium yields EA(C(7)F(14)) = 1.02 ± 0.06 eV, in agreement with the literature value while more than halving the uncertainty. Implications of the measurement for the electron affinity of SF(6) are discussed. The dominant product of electron attachment is the parent anion, but C(6)F(11)(-) and C(7)F(13)(-) are also observed at very low levels (<0.1%) at room temperature and increase in importance as the temperature is increased, reaching ~10% each at 630 K. In the course of this work we have also measured rate coefficients for the neutralization of C(7)F(14)(-) by Ar(+) at 300, 400, and 500 K: 4.8, 3.5, and 3.1 × 10(-8) cm(3) s(-1), respectively, with uncertainties of ±5 × 10(-9) cm(3) s(-1).

Dissociative electron attachment to C2F5 radicals.

Dissociative electron attachment to the reactive C(2)F(5) molecular radical has been investigated with two complimentary experimental methods; a single collision beam experiment and a new flowing afterglow Langmuir probe technique. The beam results show that F(-) is formed close to zero electron energy in dissociative electron attachment to C(2)F(5). The afterglow measurements also show that F(-) is formed in collisions between electrons and C(2)F(5) molecules with rate constants of 3.7 × 10(-9) cm(3) s(-1) to 4.7 × 10(-9) cm(3) s(-1) at temperatures of 300-600 K. The rate constant increases slowly with increasing temperature, but the rise observed is smaller than the experimental uncertainty of 35%.

O2(a1Δg) + Mg, Fe, and Ca: experimental kinetics and formulation of a weak collision, multiwell master equation with spin-hopping.

The first excited electronic state of molecular oxygen, O(2)(a(1)Δ(g)), is formed in the upper atmosphere by the photolysis of O(3). Its lifetime is over 70 min above 75 km, so that during the day its concentration is about 30 times greater than that of O(3). In order to explore its potential reactivity with atmospheric constituents produced by meteoric ablation, the reactions of Mg, Fe, and Ca with O(2)(a) were studied in a fast flow tube, where the metal atoms were produced either by thermal evaporation (Ca and Mg) or by pulsed laser ablation of a metal target (Fe), and detected by laser induced fluorescence spectroscopy. O(2)(a) was produced by bubbling a flow of Cl(2) through chilled alkaline H(2)O(2), and its absolute concentration determined from its optical emission at 1270 nm (O(2)(a(1)Δ(g) - X(3)Σ(g) (-)). The following results were obtained at 296 K: k(Mg + O(2)(a) + N(2) → MgO(2) + N(2)) = (1.8 ± 0.2) × 10(-30) cm(6) molecule(-2) s(-1); k(Fe + O(2)(a) → FeO + O) = (1.1 ± 0.1) × 10(-13) cm(3) molecule(-1) s(-1); k(Ca + O(2)(a) + N(2) → CaO(2) + N(2)) = (2.9 ± 0.2) × 10(-28) cm(6) molecule(-2) s(-1); and k(Ca + O(2)(a) → CaO + O) = (2.7 ± 1.0) × 10(-12) cm(3) molecule(-1) s(-1). The total uncertainty in these rate coefficients, which mostly arises from the systematic uncertainty in the O(2)(a) concentration, is estimated to be ±40%. Mg + O(2)(a) occurs exclusively by association on the singlet surface, producing MgO(2)((1)A(1)), with a pressure dependent rate coefficient. Fe + O(2)(a), on the other hand, shows pressure independent kinetics. FeO + O is produced with a probability of only ∼0.1%. There is no evidence for an association complex, suggesting that this reaction proceeds mostly by near-resonant electronic energy transfer to Fe(a(5)F) + O(2)(X). The reaction of Ca + O(2)(a) occurs in an intermediate regime with two competing pressure dependent channels: (1) a recombination to produce CaO(2)((1)A(1)), and (2) a singlet∕triplet non-adiabatic hopping channel leading to CaO + O((3)P). In order to interpret the Ca + O(2)(a) results, we utilized density functional theory along with multireference and explicitly correlated CCSD(T)-F12 electronic structure calculations to examine the lowest lying singlet and triplet surfaces. In addition to mapping stationary points, we used a genetic algorithm to locate minimum energy crossing points between the two surfaces. Simulations of the Ca + O(2)(a) kinetics were then carried out using a combination of both standard and non-adiabatic Rice-Ramsperger-Kassel-Marcus (RRKM) theory implemented within a weak collision, multiwell master equation model. In terms of atmospheric significance, only in the case of Ca does reaction with O(2)(a) compete with O(3) during the daytime between 85 and 110 km.

Behavior of rate coefficients for ion-ion mutual neutralization, 300-550 K.

Rate coefficients k(MN) have been measured for a number of anion neutralization reactions with Ar(+) and Kr(+) over the temperature range 300-550 K. For the first time, the data set includes anions of radicals and other short-lived species. In the present paper, we review these results and make note of correlations with reduced mass, electron binding energy of the anion (equivalent to the electron affinity of the corresponding neutral), and temperature, and compare with expectations from absorbing sphere models. An intriguing result is that the data for diatomic anions neutralized by Ar(+) and Kr(+) have k(MN) values close to 3 × 10(-8) cm(3) s(-1) at 300 K, a figure which is lower than those for all of the polyatomic anions at 300 K except for SF(5)(-) + Kr(+). For the polyatomic anions studied here, neutralized by Ar(+) and Kr(+), the reduced mass dependence agrees with theory, on average, but we find a stronger temperature dependence of T(-0.9) than expected from the theoretical E(-0.5) energy dependence of the rate coefficient at thermal energies. The k(MN) show a weak dependence on the electron binding energy of the anion for the polyatomic species studied.

Kinetics of electron attachment to OH and HNO3 and mutual neutralization of Ar+ with NO2(-) and NO3(-) at 300 and 500 K.

The electron attachment rate constant to nitric acid (HNO(3)) has been measured in a flowing afterglow-Langmuir probe (FALP) apparatus at 300 and 500 K using three independent methods: the traditional FALP technique of monitoring electron depletion, "one-gas" VENDAMS (variable electron and neutral density attachment mass spectrometry), and "two-gas" VENDAMS. The three measurements are in agreement with a 300 K weighted average of 1.4 ± 0.3 × 10(-7) cm(3) s(-1), 2 to 10 times higher than previously reported values. Attachment is primarily dissociative yielding NO(2)(-) as previously reported, but for the first time a small endothermic channel to produce OH(-) was also observed at 500 K. From the one-gas VENDAMS data, associative attachment to the OH produced in the primary attachment was found to occur with an effective two body rate constant of 1.2±(0.7) (3)×10(-11) cm(3) s(-1) at 300 K, the first reported rate constant for this radical species. Finally, ion-ion neutralization rate constants of NO(2)(-) and NO(3)(-) with Ar(+) were determined to be 5.2±(2.5) (1.5) × 10(-8) and 4.5 ± 2.5 × 10(-8) cm(3) s(-1) at 300 K, respectively.

Electron attachment to POCl3. III. Measurement and kinetic modeling of branching fractions.

Electron attachment to POCl(3) was studied in the bath gas He over the pressure range 0.4-3.1 Torr and the temperature range 300-1210 K. Branching fractions of POCl(3)(-), POCl(2)(-), Cl(-), and Cl(2)(-) were measured. The results are analyzed by kinetic modeling, using electron attachment theory for the characterization of the nonthermal energy distribution of the excited POCl(3)(-∗) anions formed and chemical activation-type unimolecular rate theory for the subsequent competition between collisional stabilization of POCl(3)(-∗) and its dissociation to various dissociation products. Primary and secondary dissociations and∕or thermal dissociations of the anions are identified. The measured branching fractions are found to be consistent with the modeling results based on molecular parameters obtained from quantum-chemical calculations.

Kinetics of electron attachment to SF3CN, SF3C6F5, and SF3 and mutual neutralization of Ar+ with CN- and C6F5(-).

The additions of two sulfur fluoride derivatives (SF(3)C(6)F(5) and SF(3)CN) to a flowing afterglow were studied by variable electron and neutral density mass spectrometry. Data collection and analysis were complicated by the high reactivity of the neutral species. Both species readily dissociatively attach thermal electrons at 300 K to yield SF(3) + X(-) (X = C(6)F(5), CN). Attachment to SF(3)C(6)F(5) also results in SF(3)(-) + C(6)F(5) as a minor product channel. The determined electron attachment rate constants were 1(-0.6) (+1) × 10(-7) cm(3) s(-1) for SF(3)C(6)F(5), a lower limit of 1 × 10(-8) cm(3) s(-1) for SF(3)CN, and 4 ± 3 × 10(-9) cm(3) s(-1) for SF(3). Mutual neutralization rate constants of C(6)F(5)(-) and CN(-) with Ar(+) at 300 K were determined to be 5.5(-1.6) (+1.0) × 10(-8) and 3.0 ± 1 × 10(-8) cm(3) s(-1), respectively.

Reaction of HOD+ with NO2: effects of OD and OH stretching, bending, and collision energy on reactions on the singlet and triplet potential surfaces.

Integral cross sections and product recoil velocity distributions were measured for the reaction of HOD(+) with NO(2), in which the HOD(+) reactant was prepared in its ground state and with mode-selective excitation in the 001 (OH stretch), 100 (OD stretch), and 010 (bend) modes. In addition, we measured the 300 K thermal kinetics in a selected ion flow tube reactor and report product branching ratios different from previous measurements. Reaction is found to occur on both the singlet and triplet surfaces with near-unit efficiency. At 300 K, the product branching indicates that triplet → singlet transitions occur in about 60% of triplet-coupled collisions, which we attribute to long interaction times mediated by complexes on the triplet surface. Because the collision times are much shorter in the beam experiments, the product distributions show no signs of such transitions. The dominant product on the singlet surface is charge transfer. Reactions on the triplet surface lead to NO(+), NO(2)H(+), and NO(2)D(+). There is also charge transfer, producing NO(2)(+) (a(3)B(2)); however, this triplet NO(2)(+) mostly predissociates. The NO(2)H(+)/NO(2)D(+) cross sections peak at low collision energies and are insignificant above ~1 eV due to OH/OD loss from the nascent product ions. The effects of HOD(+) vibration are mode-specific. Vibration inhibits charge transfer, with the largest effect from the bend. The NO(2)H(+)/NO(2)D(+) channels are also vibrationally inhibited, and the mode dependence reveals how energy in different reactant modes couples to the internal energy of the product ions.

Electron-catalyzed mutual neutralization of various anions with Ar+: evidence of a new plasma process.

The mutual neutralization of anions with Ar+ has been studied by variable electron and neutral density attachment mass spectrometry. Evidence of a previously unobserved plasma loss process, electron-catalyzed mutual neutralization (ECMN), e.g., SF6-+Ar+ + e-→neutrals + e-, is reported. Results for 10 species suggest that ECMN occurs generally and significantly affects the total ion-loss rate in plasmas with electron densities exceeding 10(10) cm-3. ECMN is discussed in the context of other known three-body plasma processes, the mechanisms for which appear insufficient to explain the observed effect. A mechanism for ECMN involving an incident electron facilitating energy transfer to the internal modes of the anion is proposed.

Reactions of Ions with Ionic Liquid Vapors by Selected-Ion Flow Tube Mass Spectrometry.

Room-temperature ionic liquids exert vanishingly small vapor pressures under ambient conditions. Under reduced pressure, certain ionic liquids have demonstrated volatility, and they are thought to vaporize as intact cation-anion ion pairs. However, ion pair vapors are difficult to detect because their concentration is extremely low under these conditions. In this Letter, we report the products of reacting ions such as NO(+), NH4(+), NO3(-), and O2(-) with vaporized aprotic ionic liquids in their intact ion pair form. Ion pair fragmentation to the cation or anion as well as ion exchange and ion addition processes are observed by selected-ion flow tube mass spectrometry. Free energies of the reactions involving 1-ethyl-3-methylimidazolium bis-trifluoromethylsulfonylimide determined by ab initio quantum mechanical calculations indicate that ion exchange or ion addition are energetically more favorable than charge-transfer processes, whereas charge-transfer processes can be important in reactions involving 1-butyl-3-methylimidazolium dicyanamide.

Kinetics following addition of sulfur fluorides to a weakly ionized plasma from 300 to 500 K: rate constants and product determinations for ion-ion mutual neutralization and thermal electron attachment to SF5, SF3, and SF2.

Rate constants for several processes including electron attachment to SF(2), SF(3), and SF(5) and individual product channels of ion-ion mutual neutralization between SF(6)(-), SF(5)(-), and SF(4)(-) with Ar(+) were determined by variable electron and neutral density attachment mass spectrometry. The experiments were conducted with a series of related neutral precursors (SF(6), SF(4), SF(5)Cl, SF(5)C(6)H(5), and SF(3)C(6)F(5)) over a temperature range of 300-500 K. Mutual neutralization rate constants for SF(6)(-), SF(5)(-), and SF(4)(-) with Ar(+) are reported with uncertainties of 10-25% and show temperature dependencies in agreement with the theoretical value of T(-0.5). Product branching in the mutual neutralizations is temperature independent and dependent on the electron binding energy of the anion. A larger fraction of product neutrals from the SF(6)(-) mutual neutralization (0.9 ± 0.1) are dissociated than in the SF(5)(-) mutual neutralization (0.65 ± 0.2), with the SF(4)(-) (0.7 ± 0.3) likely lying in between. Electron attachment to SF(5) (k = 2.0 × 10(-8) ±(1)(2) cm(3) s(-1) at 300 K) and SF(3) (4 ± 3 × 10(-9) cm(3) s(-1) at 300 K) show little temperature dependence. Rate constants of electron attachment to closed-shell SF(n) species decrease as the complexity of the neutral decreases.

Electron attachment to propargyl chloride, 305-540 K.

Electron attachment to propargyl chloride (HC≡C-CH(2)Cl) was studied in a flowing-afterglow Langmuir-probe apparatus from 305 to 540 K. The sole ion product in this temperature range is Cl(-). Electron attachment is very inefficient, requiring correction for a competing process of electron recombination with molecular cations produced in reaction between Ar(+) and propargyl chloride and subsequent ion-molecule reactions. The electron attachment rate coefficient was measured to be 1.6×10(-10)cm(3) s(-1) at 305 K and increased to 1.1×10(-9)cm(3) s(-1) at 540 K.

Reexamination of the quenching of NO(+) vibrations by O(2)(a (1)Delta(g)).

The quenching of vibrationally excited NO(+) by O(2)(a (1)Delta(g)) has been examined using the monitor ion technique and chemical generation of O(2)(a (1)Delta(g)). In contrast to previous results which showed that the rate constant was much larger than for ground state O(2), this study finds that the rate constant for quenching is below the detection limit (<10(-11) cm(3) s(-1)) of this experiment. The previous experiments produced O(2)(a (1)Delta(g)) in a discharge, which would also produces O atoms. We found that the monitor ion CH(3)I(+) reacts with O atoms to produce CHIOH(+). This is the likely cause of error in the previous experiments.

Reactions of negative ions with ClN3 at 300 K.

The reactivity of ClN(3) with 17 negative ions has been investigated at 300 K. The electron affinity (EA) of ClN(3) was bracketed to be between that of NO(2) and N(3), giving EA(ClN(3)) = 2.48 +/- 0.20 eV, in agreement with an electronic structure calculation. Reaction rate constants and product ion branching ratios were measured. In nearly all cases the major product of the reaction was chloride ions. Charge transfer, N(3)(-) production, and O atom incorporation is also observed. DFT calculations of stable complexes and transition states are presented for two typical ions. Mechanistic details are discussed in terms of reaction coordinate diagrams.

Electron attachment to sulfur oxyhalides: SOF2, SOCl2, SO2F2, SO2Cl2, and SO2FCl attachment rate coefficients, 300-900 K.

Electron attachment to SOF(2), SOCl(2), SO(2)F(2), SO(2)FCl, and SO(2)Cl(2) was studied with two flowing-afterglow Langmuir-probe apparatuses over the temperature range 300-900 K. Attachment rate coefficients at 300 K are k(a) = 2.6+/-0.8x10(-10)(SOF(2)), 1.8+/-0.5x10(-8)(SOCl(2)), 4.8+/-0.7x10(-10)(SO(2)F(2)), 2.4+/-0.7x10(-9)(SO(2)Cl(2)), and 2.0+/-0.6x10(-7) cm(3) s(-1)(SO(2)FCl). Arrhenius plots of the data imply activation energies of 56+/-22 meV(SOF(2)), 92+/-40(SO(2)F(2)), 44+/-22 meV(SOCl(2)), and 29+/-15 meV(SO(2)Cl(2)). The rate coefficients for SO(2)FCl decrease slightly with temperature, commensurate with the decrease in the capture rate coefficient. Electron attachment to SOF(2) and SO(2)F(2) is nondissociative, while reaction with SOCl(2), SO(2)FCl, and SO(2)Cl(2) is dissociative. Dissociative attachment is dominated by channels arising from S-Cl bond cleavage but also includes a minor channel forming a dihalide product ion. Branching fraction data are reported for the dissociative attachment channels.

Variable electron and neutral density attachment mass spectrometry: temperature-dependent kinetics of electron attachment to PSCL(3) and PSCL(2) and mutual neutralization of PSCl(2)(-) and PSCl(-) with Ar(+).

We describe the VENDAMS (variable electron and neutral density attachment mass spectrometry) technique to measure the rate constants of various processes occurring as primary, secondary, and higher order chemistry in a flowing afterglow at high charge densities over a temperature range of 300 to 550 K. In particular, we report measurements of rate constants of ion-ion mutual neutralization and electron attachment to radical species, processes which have proven difficult to study through other means. The product negative ion abundances from the addition of PSCl(3) to an Ar(+)/e(-) plasma have been measured as a function of initial electron densities between 1 × 10(8) and 4 × 10(10) cm(-3). Data at lower electron densities yield branching ratios of the primary electron attachment to PSCl(3); determination of the reactions and rate constants occurring at low electron densities then allows for determination of the greater number of reactions and rate constants contributing at higher electron densities. Reaction rate constants and branching ratios of electron attachment to PSCl(2) are reported; this is the first measurement of electron attachment to a radical as a function of temperature. The data show an unusual negative temperature dependence; however, a zero or even slightly positive dependence is within the uncertainty. Measured electron attachment rate constants are 1.4 × 10(-7), 1.1 × 10(-7), and 9.1 × 10(-8) ± 40% cm(3) s(-1) at 300, 400, and 550 K, respectively; the dominant product channel is PSCl + Cl(-) (95, 87, and 77% at 300, 400, and 550 K), and the minor channel is PSCl(-) + Cl. Ion-ion mutual neutralization rate constants of both PSCl(-) and PSCl(2)(-) with Ar(+) are reported over the investigated temperature range; rate constants at 300 K are 4.9 × 10(-8) ± 20% cm(3) s(-1) and 4.5 × 10(-8) ± 15% cm(3) s(-1) and show temperature dependences of T(-0.5±0.3) and T(-0.9±0.3), respectively.

Electron attachment to chlorine azide at 298 and 400 K.

Electron attachment to chlorine azide (ClN(3)) was studied using a flowing-afterglow Langmuir-probe apparatus. Electron attachment rates were measured to be 3.5x10(-8) and 4.5x10(-8) cm(3) s(-1) at 298 and 400 K, respectively, with an estimated 35% absolute accuracy. Cl(-) was the sole ion product of the attachment reaction; weak ion signals were observed for other anions and attributed to impurities and secondary ion-molecule reactions. Assuming a relative uncertainty of +/-10% for these data, an activation energy for the attachment reaction may be given as 24+/-10 meV.