Assessment by self-organizing maps of element release from sediments in contact with acidified seawater in laboratory leaching test conditions.

Carbon capture and storage (CCS) is gaining interest as a significant global option to reduce emissions of CO2. CCS development requires an assessment of the potential risks associated with CO2 leakages from storage sites. Laboratory leaching tests have proved to be a useful tool to study the potential mobilization of metals from contaminated sediment in a decreased-pH environment that mimics such a leakage event. This work employs a self-organizing map (SOM) tool to interpret and analyze the release of dissolved organic carbon (DOC), As, Cd, Cr, Cu, Ni, Pb, and Zn from equilibrium, column, and pH-dependent leaching tests. In these tests, acidified seawater is used for simulating different CO2 leakage scenarios. Classification was carried out detailing the mobilization of contaminants for environments of varying pH, liquid-to-solid ratio, and type of contact of the laboratory leaching tests. Component planes in the SOMs allow visualization of the results and the determination of the worst case of element release. The pH-dependent leaching test with initial addition of either base or acid was found to mobilize the highest concentrations of metals.

Technological behaviour and recycling potential of spent foundry sands in clay bricks.

The feasibility of recycling spent foundry sand in clay bricks was assessed in laboratory, pilot line and industrial trials, using naturally occurring sand as a reference. Raw materials were analyzed by X-ray fluorescence, X-ray diffraction, particle size distribution, and leaching and combined to produce bodies containing up to 35% wt. sand. The extrusion, drying and firing behaviour (plasticity, drying sensitivity, mechanical strength, bulk density, water absorption, and shrinkage) were determined. The microstructure, phase composition, durability and leaching (EN 12457, granular materials, end-life step, European Waste Landfill Directive; NEN 7345, monolithic materials, use-life step, Dutch Building Material Decree) were evaluated for bricks manufactured at optimal firing temperature. These results demonstrate that spent foundry sand can be recycled in clay bricks. There are no relevant technological drawbacks, but the feasibility strongly depends on the properties of the raw materials. Spent foundry sand may be introduced into bricks up to 30% wt. Most of the hazardous elements from the spent foundry sand are inertized during firing and the concentrations of hazardous components in the leachates are below the standard threshold for inert waste category landfill excepting for chromium and lead; however, their environmental risk during their use-life step can be considered negligible.

Stabilization/solidification of an alkyd paint waste by carbonation of waste-lime based formulations.

The application of solvent-based paints by spraying in paint booths is extensively used in a wide range of industrial activities for the surface treatment of a vast array of products. The wastes generated as overspray represent an important environmental and managerial problem mainly due to the hazardous characteristics of the organic solvent, rendering it necessary to appropriately manage this waste. In this paper a solidification/stabilization (S/S) process based on accelerated carbonation was investigated as an immobilization pre-treatment prior to the disposal, via landfill, of an alkyd solvent-based paint waste coming from the automotive industry; the purpose of this S/S process was to immobilize the contaminants and reduce their release into the environment. Different formulations of paint waste with lime, lime-coal fly-ash and lime-Portland cement were carbonated to study the effect of the water/solid ratio and carbonation time on the characteristics of the final product. To assess the efficiency of the studied S/S process, metals, anions and dissolved organic carbon (DOC) were analyzed in the leachates obtained from a battery of compliance and characterization leaching tests. Regarding the carbonation of paint waste-lime formulations, a mathematical expression has been proposed to predict the results of the leachability of DOC from carbonated mixtures working at water/solid ratios from 0.2 to 0.6. However, lower DOC concentrations in leachates (400mg/kg DOC in L/S=10 batch leaching test) were obtained when carbonation of paint waste-lime-fly-ash mixtures was used at 10h carbonation and water to solid ratio of 0.2. The flammability characteristics, the total contents of contaminants and the contaminant release rate in compliance leaching tests provide evidence for a final product suitable for deposition in non-hazardous landfills. The characterization of this carbonated sample using a dynamic column leaching test shows a high stabilization of metals, partial immobilization of Cl(-), SO(4)(2-), F(-) and limited retention of DOC. However, the obtained results improve the previous findings obtained after the paint waste S/S using uncarbonated formulations and would be a useful pre-treatment technique of the alkyd paint waste prior to its disposal in a landfill.

Influence of commercial and residual sorbents and silicates as additives on the stabilisation/solidification of organic and inorganic industrial waste.

An environmental problem of the foundry activities is the management of industrial waste generated in different processes. The foundry sludge from gas wet cleaning treatment that contains organic and inorganic compounds and a high content of water is an interesting example. Due to their characteristics, they can be managed using different stabilisation/solidification (S/S) technologies prior to land disposal. The purpose of this work is to study S/S formulations in order to improve the control of the mobility of the pollutants and the ecotoxicity of the samples. Different mixtures of cement or lime as binders and additives (foundry sand, silica fume, sodium silicate, silicic acid, activated carbon and black carbon) have been used in order to reduce the mobility of the chemical and ecotoxicological regulated parameters and to compare the results for commercial and residual additives. The best results have been obtained with sorbents (activated carbon and black carbon) or sodium silicate. The results of the foundry sand ash as additive can conclude that it can be used as replacement in the cement products. However, silica fume in the samples with lime and siliceous resin sand as additives gives products that do not fulfil the regulated limits. Finally, some linear expressions between the chemical parameters and the quantity of material used in the samples have been obtained.

Toxicity bioassays in core sediments from the Bay of Santander, northern Spain.

The use of Vibrio fischeri as luminescence bacteria is particularly effective in evaluating contaminated sediment. In this study, the ecotoxicity of five core sediments from the Bay of Santander, northern Spain, utilising V. fischeri as marine bacterium, was carried out. Different toxicity assay procedures were applied in order to study the influence of the mobility and bioavailability of the pollutants. Basic Solid Phase Test (BSPT) in whole sediment and acute toxicity test, using pore water and three leaching test procedures as liquid extracts, were applied. In addition, the study of the influence of the pH value on the toxicity results of the leaching tests was conducted. The obtained results show toxicity units (TU50) values in BSPT test ranging from 0.42 to 39.06 with a decrease with depth as general trend and TU50 values from 0.010 to 0.389 in the liquid extracts, where TU50 is calculated as the inverse of EC50 (%). The obtained data show the historical toxicity trends of the Bay of Santander and provides a technical database for the management of contaminated sediments. Moreover, these results showed evidence that each sediment test procedure provided independent and complementary ecotoxicological responses useful for a sediment classification. In order to analyse the correlations between chemical parameters (both organic and inorganic) and the toxicity results, the self-organising map (SOM) neural network and regression equations were applied. Satisfactory correlations (R=0.93) between chemical concentrations of sum of five heavy metals and 16 PAHs and BSPT toxicity were obtained.

Physico-chemical and toxicological characterization of the historic estuarine sediments: a multidisciplinary approach.

The accumulation rates, the geochronology of metals and PAH contamination, and the Microtox toxicity are studied in five sediment cores (50 cm length) covering different areas of the Santander Bay, Northern Spain. Chronology given by (210)Pb and (137)Cs reveals significant differences in accumulation rates between sites (0.2-1.1 cm/year), as well as a variable degree of anthropogenic enrichment factors for Fe, Mn, Cu, Pb, Zn, Ni (from 1 to 15) and concentrations of summation Sigma 16PAHs (from 0.01 to 23.84 mg/kg dw) in sediments over the last 90 years. The results indicate the increasing contamination pressure from industrial and urban activities along the Bay. No toxic results from the Microtox test are obtained either with pore water or with normalised sediment aqueous extracts (European Norm EN 12457), suggesting low water solubility and low availability of contaminants in the studied sediments. However, the EC50 values from the Microtox Basic Solid Phase Test (BSPT) ranged from 0.03% to 2.35%, showing vertical toxicity profiles in accordance with metal and PAHs behaviour. The correlation degrees of Microtox BSPT toxicity to chemical concentration in sediment profiles are widely variable showing a high site-dependent toxicity. The oligochaete Limnodrilus hoffmeisteri has been used as a chronic bioassay over surface sediments of two of the studied sites, showing results coherent with the Microtox BSPT acute test results. Global results of the present work provide regional geochemical baselines for metals and PAHs and toxicological data now make it possible to obtain a preliminary quality assessment of the Santander Bay sediment profiles.

Waste minimisation in a hard chromiun plating Small Medium Enterprise (SME).

The high potential of waste stream minimisation in the metal finishing sector justifies specific studies of Small and Medium Enterprises (SME). In this work, the minimisation options of the wastes generated in a hard chromium plating activity have been analysed. The study has been performed in a small job shop company, which works in batch mode with big pieces. A process flowsheet after connecting the unit operations and determining the process inputs (raw and secondary materials) and outputs (waste streams) has been carried out. The main properties, quantity and current management of the waste streams have been shown. The obvious lack of information has been identified and finally the waste minimisation options that could be adopted by the company have been recorded.

Characterisation and management of incinerator wastes.

Management of municipal and hospital wastes by means of incineration processes generates solid residues, such as bottom and fly ashes and air pollution control residues with high content of heavy metals, inorganic salts and other organic compounds. Characterisation of 24 ash samples, collected from four municipal solid waste incinerators (MSWI) and six hospital medical waste incinerators (HMWI) located in the Basque Country Region (Northern Spain), were carried out at the request of Spanish Regulations and European Economic Community guidelines. The ecotoxicity values, EC(50), of the TCLP leachates show a high variability ranging from 12,967 to 1,000,000mgl(-1) in MSWI samples and from 2917 to 333,150mgl(-1) in HMWI samples. Results from chemical characterisation of DIN 38414-S4 leachates show a high concentration of lead, sulphate and chloride in MSWI samples and chromium in HMWI samples.