ABSTRACT
In this study, we used radical polymerization to create poly (N-isopropyl acrylamide)-co-poly (sodium acrylate) [PNIPAM-co-PSA] hydrogels and analyzed the resulting products. N, N'-Methylenebisacrylamide was employed as a cross-linker, ammonium persulfate as an initiator, and N,N'-isopropyl acrylamide and sodium acrylamide as monomers. Structural analysis was measured by using FT-IR. Indeed, SEM analysis was used to characterize the morphological structure of the hydrogel. Studies on swelling were also done. The Taguchi approach was used to study and assess the adsorption studies of the hydrogels for the efficient removal of malachite green and methyl orange. For the optimization, a central composite surface methodology was applied. The effect of several parameters, including adsorbent dosage, pH, initial dye concentration, temperature, time, and mixing speed, was examined using the Taguchi technique, and the primary factors were chosen and examined using the central composite surface methodology. It was discovered that MG dye's (cationic) removal efficiency was higher than that of MO dye's (anionic). The results suggest that [PNIPAM-co-PSA] hydrogel can be used as an effective, alternative and promising adsorbent to be applied in the treatment of effluents containing the cationic dyes from wastewater. The synthesis of hydrogels provides a suitable recyclability platform for the adsorption of cationic dyes and allows for their recovery without the use of powerful reagents.
ABSTRACT
In this study, polyurethane (PU)-based xerogels were synthesized by using the biobased polyol derived from chaulmoogra seed oil. These polyol was used for the preparation of PU xerogels using methylene diphenyl diisocyanate hard segment and polyethylene glycol (PEG6000) as soft segment with 1,4-diazabicyclo[2, 2, 2]octane as catalyst. Tetrahydrofuran, acetonitrile and dimethyl sulfoxide were used as the solvents. Nanocellulose (5 wt %) prepared from bagasse were added as filler, and the obtained composite xerogels were evaluated for chemical stability. The prepared samples were also characterized by using SEM and FTIR. Waste sugarcane bagasse nanocellulose proved as a cheap reinforcer in the xerogel synthesis and for the adsorption of Rhodamine-B dye from the aqueous solution. The factors that affect the adsorption process have been studied including the quantity of the adsorbent (0.02-0.06 g), pH (6-12), temperature (30-50) and time (30-90). Central composite design for four variables and three levels with response surface methodology has been used to get second-order polynomial equation for the percentage dye removal. RSM was confirmed by the measurement of analysis of variance. Increase in the pH and quantity of the adsorbent was found to increase the sorption capacities of the xerogel (NC-PUXe) towards rhodamine B, maximum adsorption.
