Comparative assessment of the acute toxicity of commercial bio-based polymer leachates on marine plankton.

Conventional plastics have become a major environmental concern due to their persistence and accumulation in marine ecosystems. The development of potential degradable polymers (PBP), such as polyhydroxyalkanoates (PHAs) and polylactic acid (PLA), has gained attention as an alternative to mitigate plastic pollution, since they have the potential to biodegrade under certain conditions, and their production is increasing as replacement of conventional polyolefins. This study aimed to assess and compare the toxicity of leachates of pre-compounding PBP (PLA and the PHA, polyhydroxybutyrate-covalerate (PHBv)) and polypropylene (PP) on five marine planktonic species. A battery of standard bioassays using bacteria, microalgae, sea urchin embryos, mussel embryos and copepod nauplii was conducted to assess the toxicity of leachates from those polymers. Additionally, the presence of chemical additives in the leachates was also verified through GC-MS and LC-HRMS analysis. Results showed that PHBv leachates exhibited higher toxicity compared to other polymers, with the microalgae Rhodomonas salina, being the most sensitive species to the tested leachates. On the other hand, PP and PLA generally displayed minimal to no toxicity in the studied species. Estimated species sensitivity distribution curves (SSD) show that PHBv leachates can be 10 times more hazardous to marine plankton than PP or PLA leachates, as demonstrated by the calculated Hazardous Concentration for 5 % of species (HC5). Qualitative chemical analysis supports the toxicological results, with 80 % of compounds being identified in PHBv leachates of which 2,4,6-trichlorophenol is worth mentioning due to the deleterious effects to aquatic biota described in literature. These findings underscore the fact that whereas environmental persistence can be targeted using PBP, the issue of chemical safety remains unsolved by some alternatives, such as PHBv. Gaining a comprehensive understanding of the toxicity profiles of PBP materials through a priori toxicological risk assessment is vital for their responsible application as alternatives to conventional plastics.

Design, Synthesis of 3-(5-Substituted Phenyl-[1,3,4]oxadiazol-2-yl)-1H-indole and Its Microbial Activity.

Fischer indole synthesis of indole by using phenyl-hydrazine and acetaldehyde resulted 1H-Indole while phenyl-hydrazine reacted with malonaldehyde gives 1H-Indole-3-carbaldehyde. Also Vilsmeier-Haack formylation of 1H-Indole gives 1H-Indole-3-carbaldehyde. 1H-Indole-3-carbaldehyde were oxidized to form 1H-Indole-3-carboxylic acid. 1H-Indole reacted with excess of BuLi at -78 °C using dry ice also gives 1H-Indole-3-carboxylic acid. Obtained 1H-Indole-3-carboxylic acid was converted to ester and ester in to acid hydrazide. Finally 1H-Indole-3-carboxylic acid hydrazide reacted with substituted carboxylic acid gives microbial active indole substituted oxadiazoles. Synthesized compounds 9a-j showing promising in vitro anti microbial activities against S. aureus bacteria compared with Streptomycin. Compound 9a, 9f and 9g showing activities against E. coli compared with standards. Compound 9a and 9f are found potent active against B. subtilis compared with reference standard while compound 9a, 9c and 9j active against S. typhi.

Identification of Candidate Genes Regulating Drought Tolerance in Pearl Millet.

Pearl millet is an important crop of the arid and semi-arid ecologies to sustain food and fodder production. The greater tolerance to drought stress attracts us to examine its cellular and molecular mechanisms via functional genomics approaches to augment the grain yield. Here, we studied the drought response of 48 inbreds representing four different maturity groups at the flowering stage. A set of 74 drought-responsive genes were separated into five major phylogenic groups belonging to eight functional groups, namely ABA signaling, hormone signaling, ion and osmotic homeostasis, TF-mediated regulation, molecular adaptation, signal transduction, physiological adaptation, detoxification, which were comprehensively studied. Among the conserved motifs of the drought-responsive genes, the protein kinases and MYB domain proteins were the most conserved ones. Comparative in-silico analysis of the drought genes across millet crops showed foxtail millet had most orthologs with pearl millet. Of 698 haplotypes identified across millet crops, MyC2 and Myb4 had maximum haplotypes. The protein-protein interaction network identified ABI2, P5CS, CDPK, DREB, MYB, and CYP707A3 as major hub genes. The expression assay showed the presence of common as well as unique drought-responsive genes across maturity groups. Drought tolerant genotypes in respective maturity groups were identified from the expression pattern of genes. Among several gene families, ABA signaling, TFs, and signaling proteins were the prospective contributors to drought tolerance across maturity groups. The functionally validated genes could be used as promising candidates in backcross breeding, genomic selection, and gene-editing schemes in pearl millet and other millet crops to increase the yield in drought-prone arid and semi-arid ecologies.

'Kodo poisoning': cause, science and management.

Many mycotoxigenic fungi infect the food crops and affect the quality of the produce due to production of mycotoxins. Kodo millet is one of the important minor millets cultivated in India, mostly confined to marginal lands and tribal regions but has high yield potential under good management. The grains are nutritious and have anti-oxidant properties besides having many medicinal properties. However, the consumption is often hindered by the condition called 'kodo poisoning' resulting from fungal contamination producing cyclopiazonic acid, a toxic fungal secondary metabolite. An attempt has been made here to review the limited information available on kodo poisoning, its causes and effects, and proposed management practices by which the contamination can be checked. Further research efforts are essential for identifying sources of natural resistance to fungal metabolite, induction of host resistance through antimicrobial compounds or microbial antagonism to the pathogens to achieve cleaner grains from this crop even under high humid and rainy conditions. By effective adoption of both pre- and post-harvest management the kodo millet grains can be made safe for human consumption and can be popularized as a nutritious grain.

Hepatocyte-like cells differentiated from methylmalonic aciduria cblB type induced pluripotent stem cells: A platform for the evaluation of pharmacochaperoning.

Methylmalonic aciduria cblB type (MMA cblB type, MMAB OMIM #251110), caused by a deficiency in the enzyme ATP:cob(I)alamin adenosyltransferase (ATR, E.C_2. 5.1.17), is a severe metabolic disorder with a poor prognosis despite treatment. We recently described the potential therapeutic use of pharmacological chaperones (PCs) after increasing the residual activity of ATR in patient-derived fibroblasts. The present work reports the successful generation of hepatocyte-like cells (HLCs) differentiated from two healthy and two MMAB induced pluripotent stem cell (iPSC) lines, and the use of this platform for testing the effects of PCs. The MMAB cells produced little ATR, showed reduced residual ATR activity, and had higher concentrations of methylmalonic acid compared to healthy HLCs. Differential proteome analysis revealed the two MMAB HCLs to show reproducible differentiation, but this was not so for the healthy HLCs. Interestingly, PC treatment in combination with vitamin B12 increased the amount of ATR available, and subsequently ATR activity, in both MMAB HLCs. More importantly, the treatment significantly reduced the methylmalonic acid content of both. In summary, the HLC model would appear to be an excellent candidate for the pharmacological testing of the described PCs, for analyzing the effects of new drugs, and investigating the repurposing of older drugs, before testing in animal models.

Performance and Stability of Pearl Millet Varieties for Grain Yield and Micronutrients in Arid and Semi-Arid Regions of India.

Pearl millet [Pennisetum glaucum (L.) R. Br.] is grown under both arid and semi-arid conditions in India, where other cereals are hard to grow. Pearl millet cultivars, hybrids, and OPVs (open pollinated varieties) are tested and released by the All India Coordinated Research Project on Pearl Millet (AICRP-PM) across three zones (A1, A, and B) that are classified based on rainfall pattern. Except in locations with extreme weather conditions, hybrids dominate pearl millet growing areas, which can be attributed to hybrid vigor and the active role of the private sector. The importance of OPVs cannot be ruled out, owing to wider adaptation, lower input cost, and timely seed availability to subsidiary farmers cultivating this crop. This study was conducted to scrutinize the presently used test locations for evaluation of pearl millet OPVs across India, identify the best OPVs across locations, and determine the variation in grain Fe and Zn contents across locations in these regions. Six varieties were evaluated across 20 locations in A1 and A (pooled as A) and B zones along with three common checks and additional three zonal adapted checks in the respective zones during the 2019 rainy season. Recorded data on yield and quality traits were analyzed using genotype main effects and genotype × environment interaction biplot method. The genotype × environment (G × E) interaction was found to be highly significant for all the grain yield and agronomic traits and for both micronutrients (iron and zinc). However, genotypic effect (G) was four (productive tillers) to 49 (grain Fe content) times that of G × E interaction effect for various traits across zones that show the flexibility of OPVs. Ananthapuramu is the ideal test site for selecting pearl millet cultivars effectively for adaptation across India, while Ananthapuramu, Perumallapalle, and Gurugram can also be used as initial testing locations. OPVs MP 599 and MP 600 are identified as ideal genotypes, because they showed higher grain and fodder yields and stability compared with other cultivars. Iron and zinc concentration showed highly significant positive correlation (across environment = 0.83; p < 0.01), indicating possibility of simultaneous effective selection for both traits. Three common checks were found to be significantly low yielders than the test entries or zonal checks in individual zones and across India, indicating the potential of genetic improvement through OPVs.

Comparative Study of AMMI- and BLUP-Based Simultaneous Selection for Grain Yield and Stability of Finger Millet [Eleusine coracana (L.) Gaertn.] Genotypes.

Finger millet, an orphan crop, possesses immense potential in mitigating climate change and could offer threefold security in terms of food, fodder, and nutrition. It is mostly cultivated as a subsistence crop in the marginal areas of plains and hills. Considering the changes in climate inclusive of recurrent weather vagaries witnessed every year, it is crucial to select stable, high-yielding, area-specific, finger millet cultivars. Sixty finger millet varieties released across the country were evaluated over six consecutive rainy seasons from 2011 to 2016 at the Agricultural Research Station, Vizianagaram. The genotype × environment interaction (GEI) was found to be significant in the combined ANOVA. Furthermore, the Additive Main effects and Multiplicative Interaction (AMMI) analysis asserted that genotypes and the GEI effects accounted for approximately 89% of the total variation. Strong positive associations were observed in an estimated set of eleven stability parameters which were chosen to identify stable genotypes. Furthermore, Non-parametric and Parametric Simultaneous Selection indices (NP-SSI and P-SSI) were calculated utilizing AMMI-based stability parameter (ASTAB), modified AMMI stability value (MASV), and Modified AMMI Stability Index (MASI) to identify stable high yielders. Both methods had inherent difficulties in ranking genotypes for SSI. To overcome this, the initial culling [i.e., SSI with culling strategy (C-SSI)] of genotypes was introduced for stability. In the C-SSI method, the top ten genotypes were above-average yielders, while those with below-average yield were observed in NP-SSI and P-SSI methods. Similarly, the estimation of best linear unbiased prediction (BLUP)-based simultaneous selections, such as harmonic mean of genotypic values (HMGV), relative performance of genotypic values (RPGV), and harmonic mean of relative performance of genotypic values (HMRPGV), revealed that none of the top ten entries had below-average yield. The study has proven that C-SSI and BLUP-based methods were equally worthy in the selection of high-yielding genotypes with stable performance. However, the C-SSI approach could be the best method to ensure that genotypes with a considerable amount of stability are selected. The multi-year trial SSI revealed that entries Indaf-9, Sri Chaitanya, PR-202, and A-404; and VL324 and VL146 were ascertained to be the most stable high-yielding genotypes among medium-to-late and early maturity groups, respectively.

Variations in drought tolerance components and their association with yield components in finger millet (Eleusine coracana).

Finger millet has gained considerable attention worldwide due to its nutritional and health benefits. Being a rainfed crop of semiarid and arid regions, drought is one of the major constraints to its yield stabilisation. To address this, a set of 38 accessions of finger millet were evaluated in both field and mini-lysimeters under both well-watered (WW) and water-stressed (WS) conditions. The objectives of the study were to identify the range of variations for yield components, water-use (WU) and transpiration efficiency (TE) and to examine the potential of the mini-lysimeter system in assessing the genotypic performance in the field conditions. Approximately 2-fold variations in shoot biomass and ~9-fold variations in grain yield under WS conditions were observed. Reproductive growth was more sensitive to WS than the vegetative growth. Our results indicate that in addition to yield potential under WW conditions, WU followed by TE were the other two major contributors toward shoot biomass, whereas, HI followed by TE were the major contributors toward grain yield under WS. The close association between the yield components recorded in the field and in mini-lysimeters suggests that the lysimetric system has the great potential to reflect the genotypic performance under field conditions. Regression analyses suggest that HI explained almost all the variations in grain yield under WW conditions, whereas under WS treatment, next to HI, both TE and WU had also contributed significantly to grain yield. The absence of interrelationship between WU and TE suggests that both these components contribute independently toward the yield components under WW or WS conditions. The accessions with higher shoot biomass and grain yield extract much more water during the post-anthesis stages than the poor performers under WS. Results also suggests that higher WU contributed more towards shoot biomass and higher TE contributed more towards grain yield by improving the harvest index.

Proteostasis regulators as potential rescuers of PMM2 activity.

Phosphomannomutase 2 deficiency (PMM2-CDG) is the most common N-glycosylation disorder. To date there is no treatment. Following the identification of a number of destabilizing pathogenic variants, our group suggested PMM2-CDG to be a conformational disease. The aim of the present study was to evaluate the possible use of proteostasis network regulators to increase the stability, and subsequently the enzymatic activity, of misfolded PMM2 mutant proteins. Patient-derived fibroblasts transduced with their own PMM2 folding or oligomerization variants were treated with different concentrations of the proteostasis regulators celastrol or MG132. Celastrol treatment led to a significant increase in mutant PMM2 protein concentration and activity, while MG132 had a small effect on protein concentration only. The increase in enzymatic activity with celastrol correlated with an increase in the transcriptional and proteome levels of the heat shock proteins Hsp90 and Hsp70. The use of specific Hsp70 or Hsp90 inhibitors showed the positive effect of celastrol on PMM2 stability and activity to occur through Hsp90-driven modulation of the proteostasis network. The synergistic effect of celastrol and a previously described pharmacological chaperone was also examined, and a mutation-dependent synergistic effect on PMM2 activity was noted. These results provide proof-of-concept regarding the potential treatment of PMM2-CDG by proteostasis regulators, either alone or in combination with pharmacological chaperones.

Infliximab in the treatment of Budd-Chiari syndrome in Behçet's disease.

Behçet's disease is a chronic autoinflammatory disorder that usually presents with recurrent oral and genital ulcers, uveitis, skin lesions and arthritis. Any organ, however, can be involved and in a subgroup of patients the large vascular lesions are the predominant feature (vasculo-Behçet disease). We report a case of a 27-yearold man with Behçet's disease who developed Budd-Chiari syndrome while on immunosuppressive therapy. Infliximab resulted in a rapid and total clinical remission. Literature data have shown that antitumor necrosis factor alpha (anti-TNF-α) agents including infliximab can suppress disease activity but there is no long-term experience on tapering and/or discontinuation of treatment under clinical remission. Our case supports the use of infliximab in vasculo-Behçet patients.

Identification of differentially expressed transcripts at critical developmental stages in sorghum [Sorghum bicolor (L.) Moench] in relation to grain yield heterosis.

Evaluation of a set of 10 F1 hybrids along with their female (27A and 7A) and male parents (C 43, RS 673, RS 627, CB 26, and CB 29) for grain yield and its component traits revealed that grain yield/plant followed by panicle weight, primary branches/panicle, and 100-seed weight exhibited high levels of heterosis. Eight hybrids exhibited 50% or more mid-parent heterosis for grain yield/plant, of which, one hybrid (27A × RS673) recorded heterobeltiosis above 50% (73.61%). Differential display analysis generated about 2995 reproducible transcripts, which were categorized as UPF1-expressed in any one of the parents and F1 (10.53-14.76%), BPnF1-expressed in both parents but not in F1 (4.56-11.44%), UPnF1-expressed in either of the parents and not in F1 (17.95-27.40%), F1nBP-expressed only in F1 but not in either of the parents (14.39-20.54%), and UET-expressed in both parents and F1 (34.52-42.43%). A comparison between high and low heterotic hybrids revealed that the proportions of UPF1 and F1nBP transcript patterns were much higher in the former (21.31% and 45.24%) as compared to the latter (16.67% and 32.14%) at the booting and flowering stage, respectively, indicating the role of over-dominance and dominance in the manifestation of grain yield heterosis. Significant positive correlations were observed for differential transcript patterns with mid-parent and better-parent heterosis for the components of grain yield such as primary branches (0.63 and 0.61 at p < 0.01) and 100-seed weight (0.64 and 0.52 at p < 0.01). Cloning and sequence analysis of 16 transcripts that were differentially expressed in hybrids and their parental lines revealed that they code for genes involved in basic cellular processes, cellulose biosynthesis, and assimilate partitioning between various organs and allocation between various pathways, pyrimidine, and polyamine biosynthesis, enhancing ATP production and regulation of plant growth and development.

Molecular mapping and candidate gene analysis of a new epicuticular wax locus in sorghum (Sorghum bicolor L. Moench).

KEY MESSAGE: A new epicuticular wax (bloom) locus has been identified and fine mapped to the 207.89 kb genomic region on chromosome 1. A putative candidate gene, Sobic.001G269200, annotated as GDSL-like lipase/acylhydrolase, is proposed as the most probable candidate gene involved in bloom synthesis/deposition. Deposition of epicuticular wax on plant aerial surface is one strategy that plants adapt to reduce non-transpiration water loss. Epicuticular wax (bloom)-less mutants in sorghum with their glossy phenotypes exhibit changes in the accumulation of epicuticular wax on leaf and culm surfaces. We report molecular mapping of a new sorghum locus, bloomless mutant (bm39), involved in epicuticular wax biosynthesis in sorghum. Inheritance studies involving a profusely bloom parent (BTx623) and a spontaneous bloomless mutant (RS647) indicated that the parents differed in a single gene for bloom synthesis. Bloomless was recessive to bloom deposition. Genetic mapping involving F2 and F7 mapping populations in diverse genetic backgrounds (BTx623 × RS647; 296A × RS647 and 27A × RS647) identified and validated the map location of bm39 to a region of 207.89 kb on chromosome 1. SSR markers, Sblm13 and Sblm16, flanked the bm39 locus to a map interval of 0.3 cM on either side. Nine candidate genes were identified, of which Sobic.001G269200 annotated for GDSL-like lipase/acylhydrolase is the most likely gene associated with epicuticular wax deposition. Gene expression analysis in parents, isogenic lines and sets of near isogenic lines also confirmed the reduced expression of the putative candidate gene. The study opens possibilities for a detailed molecular analysis of the gene, its role in epicuticular wax synthesis and deposition, and may help to understand its function in moisture stress tolerance and insect and pathogen resistance in sorghum.

Synthesis and Evaluation of New 4-Chloro-2-(3-chloro-4-fluorophenyl)-5-(aliphatic/cyclic saturated amino)pyridazin-3(2H)-one Derivatives as Anticancer, Antiangiogenic, and Antioxidant Agents.

Pyridazinones are widely recognized as versatile scaffolds with a wide spectrum of biological activities. In the present work, a series of new 4-chloro-2-(3-chloro-4-fluorophenyl)-5-(aliphatic/cyclic saturated amino)pyridazin-3(2H)-one derivatives 4a-i were synthesized and characterized by spectral techniques. The inhibitory effects of the synthesized compounds 4a-i on the viability of three human cancer cell lines, HEP3BPN 11 (liver), MDA 453 (breast), and HL 60 (leukemia), were assessed using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) reduction assay. Among the compounds 4a-i screened, 4g and 4i exhibited inhibitory activity very close to the standard methotrexate; therefore, these lead compounds were further tested for their potential to inhibit the proangiogenic cytokines involved in tumor progression. Compound 4g was found to be a potent antiangiogenic agent against TNFα, VEGF, FGFb, and TGFß, whereas 4i showed potent antiangiogenic activity against TNFα, VEGF, FGFb, and leptin. All the compounds 4a-i were screened for their antioxidant activities using 2,2-diphenyl-1-picryl hydrazine (DPPH), OH, and superoxide anion radicals. Compound 4f showed better OH radical scavenging activity than the standard ascorbic acid.

A simulation study on the performance of differentiation-based methods to detect selected loci using linked neutral markers.

We investigated the performance of two of the most popular differentiation-based methods to detect loci under selection (dfdist/fdist and bayescan) in order to ascertain the average chromosome map distance between the detected outlier markers and the nearest loci under selection. We used a model of neutral markers genetically linked to selected loci (QTL) controlling a quantitative trait subject to divergent selection in two subpopulations connected by migration. The results are not particularly encouraging because for chromosome lengths above 0.5 morgan, at least 30% of outliers detected were positioned in chromosomes where QTL were absent, clearly denoting false positives. Outliers linked to QTL were on average closer to the nearest QTL than randomly chosen markers, but the methods showed a substantial uncertainty about the genetic association between markers and selected loci, as this association could be shown significantly only in a moderate number of replicates for most scenarios. At equal conditions, bayescan seemed to perform somewhat more efficiently than dfdist/fdist, with little difference between results for dominant and codominant markers.

Are the soft, liquid-like structures detected around bacteria by ambient dynamic atomic force microscopy capsules?

High-resolution imaging of bacterial capsules by microscopy is of paramount importance in microbiology due to their role in pathogenesis. This is, however, quite a challenging task due to their delicate nature. In this context, recent reports have claimed successful exploitation of the capacity of atomic force microscopy (AFM) for imaging of extremely deformable (even liquid) surfaces under ambient conditions to detect bacterial capsules in the form of tiny amounts of liquid-like substances around bacteria. In order to further explore this supposed capacity of AFM, in this work, three staphylococcal strains have been scrutinized for the presence of capsules using such an AFM-based approach with a phosphate buffer and water as the suspending liquids. Similar results were obtained with the three strains. AFM showed the presence of liquid-like substances identical to those attributed to bacterial capsules in the previous literature. Extensive imaging and chemical analysis point out the central role of the suspending liquid (buffer) in the formation of these substances. The phenomenon has been reproduced even by using nonliving particles, a finding that refutes the biological origin of the liquid-like substances visualized around the cells. Deliquescence of major components of biological buffers, such as K(2)HPO(4), CaCl(2), or HEPES, is proposed as the fundamental mechanism of the formation of these ultrasmall liquid-like structures. Such an origin could explain the high similarity of our results obtained with three very different strains and also the high similarity of these results to others reported in the literature based on other bacteria and suspending liquids. Finally, possible biological/biomedical implications of the presence of these ultrasmall amounts of liquids wrapping microorganisms are discussed.

On the role of RhoA/ROCK signaling in contact guidance of bone-forming cells on anisotropic Ti6Al4V surfaces.

Patterned surfaces direct cell spatial dynamics, yielding cells oriented along the surface geometry, in a process known as contact guidance. The Rho family of GTPases controls the assembly of focal adhesions and cytoskeleton dynamics, but its role in modulating bone-cell alignment on patterned surfaces remains unknown. This article describes the interactions of two human cell types involved in osseointegration, specifically mesenchymal stem cells and osteoblasts, with submicron- or nano-scale Ti6Al4V grooved surfaces generated by mechanical abrasion. The surface chemistry of the alloy was not affected by grinding, ensuring that the differences found in cellular responses were exclusively due to changes in topography. Patterned surfaces supported cell growth and stimulated mesenchymal stem cell viability. Anisotropic surfaces promoted cell orientation and elongation along the grates. Both cell types oriented on nanometric surfaces with grooves of 150 nm depth and 2 µm width. The number of aligned cells increased by approximately 30% on submicrometric grooves with sizes of about 1 µm depth and 10 µm width. Cells were treated with drugs that attenuate the activities of the GTPase RhoA and one of its downstream effectors, Rho-associated kinase (ROCK), and contact guidance of treated cells on the grooved surfaces was investigated. The data indicate that the RhoA/ROCK pathway is a key modulator of both mesenchymal stem cell and osteoblast orientation on nanometric surface features. RhoA and its effector participate in the alignment of mesenchymal stem cells on submicrometric grooves, but not of osteoblasts. These findings show that RhoA/ROCK signaling is involved in contact guidance of bone-related cells on metallic substrates, although to a varying extent depending on the specific cell type and the dimensions of the pattern.

Ionic liquid microdroplets as versatile lithographic molds for sculpting curved topographies on soft materials surfaces.

Soft lithography comprises a set of approaches for shaping the surface of soft materials such as PDMS on the microscopic scales. These procedures usually begin with the development of templates/masters normally generated by electron or photolithography techniques. However, the richness in available shapes is limited, usually producing shapes containing sharp parts. Innovation is called for to develop reliable approaches capable of imparting well-defined 3D curved shapes to these solids, a topology that is somehow unnatural for solid surfaces. Here we report on the use of tiny drops of room-temperature ionic liquid, organic liquids that have attracted increasing amounts of attention in recent years because of their unique chemical properties) as a versatile platform for imprinting PDMS with tunable 3D curved geometry, which is out of reach of conventional lithographic techniques and ranges from almost flat depressions to almost closed cavities on the millimeter to micrometer scale. The concept exploits a peculiar combination of physical properties displayed by ionic liquids as their null volatility and their polarity, together with some unique properties of liquid surfaces as their virtually null surface roughness. Proof-of-concept experiments show their application as chemical microreactors and ultrasmooth optical lenses. This all-liquid method is simple, low-cost, versatile, maskless, tension-free, and easily scalable, so we envision a community-wide application in numerous modern physical, chemical, biological, and engineering settings.

Biochemical and thermal stabilization parameters of polygalacturonase from Erwinia carotovora subsp. carotovora BR1.

With emphasis on thermal behavior in presence of different pH conditions and salts, the kinetic and thermodynamic parameters of purified polygalacturonase (PG) of E. carotovora subsp. carotovora (Ecc) BR1 were studied since characterization of an enzyme is significant in the context of burgeoning biotechnological applications. Thermodynamic parameters for polygalacturonic acid hydrolysis by purified PG were, deltaH* = 7.98 kJ/mol, deltaG* = 68.86 kJ/mol, deltaS*= -194.48 J/mol/K, deltaG(E-S) = -1.04 kJ/mol and deltaG(E-T) = -8.96 kJ/mol. Its turnover number (k(cat)) was 21/sec. Purified PG was stable in 20-50 degrees C temperature range and was deactivated at 60 degrees C and 70 degrees C. Thermodynamic parameters (deltaH*, deltaG*, deltaS*) for irreversible inactivation of PG at different temperatures (30-60 degrees C) were determined, where effectiveness of various salts and different pH (4-8) individually for thermal stability of PG were characterized. The efficacy of various salts for thermal stability of PG was in the following order: MgCl2 >BaCl2 >KCl >CaCl2 >NaCl. Present work projects biochemical, thermodynamics of substrate hydrolysis as well as thermal stabilization parameters of PG from Ecc.

AFM probing in aqueous environment of Staphylococcus epidermidis cells naturally immobilised on glass: physico-chemistry behind the successful immobilisation.

AFM probing of microbial cells in liquid environments usually requires them to be physically or chemically attached to a solid surface. The fixation mechanisms may influence the nanomechanical characterization done by force curve mapping using an AFM. To study the response of a microbial cell surface to this kind of local measurement this study attempts to overcome the problem associated to the uncertainties introduced by the different fixation treatments by analysing the surface of Staphylococcus epidermidis cells naturally (non-artificially mediated) immobilised on a glass support surface. The particularities of this natural bacterial fixation process for AFM surface analysis are discussed in terms of theoretical predictions of the XDLVO model applied to the systems bacteria/support substratum and bacteria/AFM tip immersed in water. In this sense, in the first part of this study the conditions for adequate natural fixation of three S. epidermidis strains have been analyzed by taking into account the geometries of the bacterium, substrate and tip. In the second part, bacteria are probed without the risk of any possible artefacts due to the mechanical or chemical fixation procedures. Forces measured over the successfully adhered cells have (directly) shown that the untreated bacterial surface suffers from a combination of both reversible and non-reversible deformations during acquisition of force curves all taken under the same operational conditions. This is revealed directly through high-resolution tapping-mode imaging of the bacterial surface immediately following force curve mapping. The results agree with the two different types of force curves that were repeatedly obtained. Interestingly, one type of these force curves suggests that the AFM tip is breaking (rather than pushing) the cell surface during acquisition of the force curve. In this case, adhesive peaks were always observed, suggesting a mechanical origin of the measured pull-off forces. The other type of force curves shows no adhesive peaks and exhibits juxtaposing of approaching and retraction curves, reflecting elastic deformations.