Mechanism of the Low-Temperature Organic Removal from Imidazolium-Containing Zeolites by Ozone Treatment: Fluoride Retention in Double-4-Rings.

For zeolites synthesized using imidazolium cations, the organic matter can be extracted at very low temperatures (100 °C) using ozone. This is possible for zeolites with 12-ring or larger pores but requires higher temperatures in medium-pore zeolites. The first chemical events in this process occur fast, even at room temperature, and imply the loss of aromaticity likely by the formation of an adduct between ozone and the imidazole ring through carbons C4 and C5. Subsequent rupture of the imidazole ring provides smaller and more flexible fragments that can desorb more readily. This process has been studied experimentally, mainly through infrared spectroscopy, and theoretically by density functional theory. Amazingly, fluoride anions occluded in the small double-four-ring units (d4r) during the synthesis remain inside the cage throughout the whole process when the temperature is not too high (≤150 °C). However, fluoride in larger cages in MFI ends up bonded to silicon in penta or hexacoordinated units, likely out of the cages, after ozone treatment at 150 °C. For several germanosilicate zeolites, the process allows their subsequent degermanation to yield stable high-silica zeolites. Quaternary ammonium cations require harsher conditions that eventually also extract fluoride from zeolite cages, including the d4r unit.

2-Isopropyl-1,3-dimethylimidazolium as a versatile structure-directing agent in the synthesis of zeolites.

An organic cation lacking specificity in its structure-directing action offers the possibility, through the screening of other structure-directing parameters, to synthesize a variety of zeolites. In this work we show that the organic structure-directing agent 2-isopropyl-1,3-dimethylimidazolium (2iPr13DMI) can produce up to seven different zeolite phases depending on water concentration, the presence of inorganic impurities, crystallization temperature and time, and germanium molar fraction. The obtained phases are very different in terms of pore system, connectivity of the zeolite structure and structural units. At the pure SiO2 side, ZSM-12 and SSZ-35 dominate, with ZSM-12 being favored by the presence of potassium impurities and by less concentrated conditions. The introduction of Ge at low levels favors SSZ-35 over ZSM-12 and as the Ge fraction increases it successively affords CSV, -CLO and two distinct UOS zeolites, HPM-11 and HPM-6. These two zeolites have the same topology but distinct chemical compositions and display powder X-ray diffraction patterns that are much different from each other and from that of as-synthesized IM-16 (UOS reference material). They also show different symmetry at 96 K. Rietveld refinements of the three as-made UOS materials mentioned are provided. HPM-6 and HPM-11 are produced in distinct, non-adjacent crystallization fields. The frequent cocrystallization of the chiral STW zeolite, however, did not afford its synthesis as a pure phase. Molecular mechanics simulations of the location of the organic cation and host-guest interactions fail to explain the observed trends, but also considering the intrinsic stability of the zeolites and the effect of germanium help to rationalize the results. The study is completed by DFT calculations of the NMR chemical shifts of 13C in UOS (helping to understand splittings in the spectrum) and 19F in CSV (supporting the location of fluoride inside the new [4452], which is an incomplete double 4-ring).

IDM-1: A Zeolite with Intersecting Medium and Extra-Large Pores Built as an Expansion of Zeolite MFI.

IDM-1 is a new silica zeolite with an ordered and well-defined framework constructed by alternating pentasil layers and interrupted layers, giving rise to an intersecting system of straight medium pores and undulating extra-large lobed pores. This unique structure was solved by rotation electron diffraction and refined against synchrotron powder X-ray diffraction data. Despite the presence of both Si(OSi)3 (OH) and Si(OSi)2 (OH)2 sites, this new zeolite presents high thermal stability, withstanding calcination even to 1000 °C. The location of defects at specific sites of the structure results in alternating hydrophobic SiO2 and hydrophilic SiO(2-x) (OH)2x intracrystalline regions. This peculiar combination of intersecting medium and extra-large pores and alternating regions of different chemical character may provide this zeolite with unique catalytic properties.

Lab and Pilot-Scale Synthesis of MxOm@SiC Core-Shell Nanoparticles.

The addition of light ceramic particles to bulk technological materials as reinforcement to improve their mechanical properties has attracted increasing interest in the last years. The metal matrix composites obtained using nanoparticles have been reported to exhibit an improvement of their properties due to the decrease in the size of the ceramic additives to the nanoscale. Additionally, important effects such as the dispersion of the nanoparticles, wettability, and low reactivity can be controlled by the modification of the nanoparticles' surface. In this work, we present the preparation of core-shell MxOm@SiC nanoparticles with different shell compositions. The accurate and reproducible preparation is developed both at the lab and pilot scale. The synthesis of these core-shell nanoparticles and their scale-up production are fundamental steps for their industrial use as additives in metal matrix composites and alloys. Powder X-ray diffraction and energy dispersive X-ray (EDX) coupled with scanning transmission electron microscopy (STEM) are used to corroborate the formation of the core-shell systems, whereas line scan-EDX analysis allows measuring the average shell thickness.

Encapsulation of folic acid in different silica porous supports: A comparative study.

Although folic acid is essential to numerous bodily functions, recent research indicates that a massive exposition to the vitamin could be a double-edged sword. In this study, the capacity of different caped mesoporous silica particles (i.e. Hollow Silica Shells, MCM-41, SBA-15 and UVM-7) to dose FA during its passage through the gastrointestinal tract has been evaluated. Results confirmed that the four capped materials were capable to hinder the delivery of FA at low pH (i.e. stomach) as well as able to deliver great amounts of the vitamin at neutral pH (i.e. intestine). Nevertheless, the encapsulation efficiency and the deliver kinetics differed among supports. While supports with large pore entrance exhibited an initial fast release, MCM-41, showed a sustained release along the time. This correlation between textural properties and release kinetics for each of the supports reveals the importance of a proper support selection as a strategy to control the delivery of active molecules.

Supramolecular transcription of guanosine monophosphate into mesostructured silica.

There is large interest in replicating biological supramolecular structures in inorganic materials that are capable of mimicking biological properties. The use of 5-guanosine monophosphate in the presence of Na(+) and K(+) ions as a supramolecular template for the synthesis of well-ordered mesostructured materials is reported here. Mesostructured particles with the confined template exhibit high structural order at both meso- and atomic scales, with a lower structural symmetry in the columnar mesophase. Although a chiral space group can not be deduced from X-ray diffraction, analysis by electron microscopy and circular dichroism confirms a chiral stacking arrangement along the c-axis. Guanosine monophosphate based mesophases thus illustrate the possibility for specific molecular imprinting of mesoporous materials by genetic material and the potential for higher definition in molecular recognition.

Mesoporous hybrid materials containing nanoscopic "binding pockets" for colorimetric anion signaling in water by using displacement assays.

Mesoporous solids functionalized with anion-binding groups have proved to be suitable anion hosts and have been used in selective colorimetric displacement assays. The material UVM-7, a mesoporous MCM41-type support characterized by the presence of nanometric mesoporous particle conglomerates, was selected as inorganic scaffolding. Reaction of the template-free UVM-7 solid with 3-aminopropyltriethoxysilane (1) yielded solid S1, from which the derivatives S2 and S3 were obtained by reaction with 2-methylthio-2-imidazoline hydroiodide (2) and butyl isocyanate (3), respectively. Solids S4 and S5 were prepared by reaction of the starting mesoporous UVM-7 scaffolding with N-methyl-N'-propyltrimethoxysilyl imidazolium chloride (4) and with 3-(trimethoxysilyl)propyl-N,N,N-trimethylammonium chloride (5), respectively. The solids synthesized contain mesoporous binding pockets that can interact with anions through electrostatic attractive forces (S1, S2, S4, S5) and hydrogen-bonding interactions (S1, S2, S3, S4). These functionalized solids were loaded with a dye (d) capable of interacting coordinatively with the anchored binding sites, in our case 5-carboxyfluorescein, to yield the hybrid materials S1d, S2d, S3d, S4d and S5d. These dye-containing solids are the signaling reporters. Their sensing ability towards a family of carboxylates, namely acetate, citrate, lactate, succinate, oxalate, tartrate, malate, mandelate, glutamate and certain nucleotides, has been studied in pure water at pH 7.5 (Hepes, 0.01 mol dm(-3)). In the sensing protocol, a particular analyte may be bonded preferentially by the nanoscopic functionalized pocket, leading to delivery of the dye to the solution and resulting in colorimetric detection of the guest. The response to a given anion depends on the characteristics of the binding pockets and the specific interaction of the anion with the binding groups in the mesopores. We believe that the possibility of using a wide variety of mesoporous supports that can easily be functionalized with anion-binding sites, combined with suitable dyes as indicators, make this approach significant for opening new perspectives in the design of chromogenic assays for anion detection in pure water.

Hybrid materials with nanoscopic anion-binding pockets for the colorimetric sensing of phosphate in water using displacement assays.

Mesoporous amino-functionalised solids containing certain dyes have been used as suitable anion hosts in displacement assays for the colorimetric signalling of phosphate in water.

Sensory hybrid host materials for the selective chromo-fluorogenic detection of biogenic amines.

Pyrylium-containing mesoporous materials have been used for the chromo-fluorogenic sensing of biogenic amines in an aqueous environment.

Anchoring dyes into multidimensional large-pore zeolites: a prospective use as chromogenic sensing materials.

A versatile procedure for anchoring dyes into the pores of multidimensional zeolites by including organic dye precursors in the synthesis gel has been developed. To prove the concept, an aniline-functionalised zeolite Beta was obtained by reaction of triethylorthosilicate (TEOS), tetraethylammonium hydroxide, and N-methyl,N-(propyl-3-trimethoxysilyl)aniline (MPTMSA) in the presence of HF. Further extraction of the structure-directing agents resulted in a highly crystalline, white, functionalised zeolite Beta containing anchored aniline groups. Similar organic functionalised molecular sieves (OFMS) have been explored as novel catalysts, but, as far as we know, OFMS have never been used as precursors for dye-immobilisation or to design new solid-based host systems for selective molecular sensing processes as is reported here. In a second step the solids containing dyes were prepared by reaction of the hybrid material with the appropriate reactives to obtain tricyanovinylbenzene, triphenylpyrylium, azoic, and squaraine derivatives. All these reactions are straightforward and involve electrophilic aromatic substitution or diazotisation reactions at the electron-rich aniline ring. The final dye-functionalised solid materials were isolated by simple filtration and washing procedures and have been characterised by a number of techniques. In all cases the Beta structure of the solid remains unaltered. Among the large number of areas where dye-containing zeolites might be of importance, we were interested in testing their unconventional use as heterosupramolecular hosts in chromogenic protocols. To check their potential use as chemosensors, microporous solids with anchored triphenylpyrilium and squaraine dyes were selected and used as sensors for the chromogenic discrimination of amines. It was found that the response of both solids to amines was basically governed by the three-dimensional (3D) solid architecture that tuned the intrinsic unselective reactivity of the pyrylium dye. By using new solid-state supramolecular chemistry protocols we believe that these, and similar future dye-zeolite hosts, might be promising new sensor materials allowing the visible discrimination of selected target guests by size and/or polarity within families or closely related molecules.

Growth of mesoporous materials within colloidal crystal films by spin-coating.

A combination of colloidal crystal planarization, stabilization, and novel infiltration techniques is used to build a bimodal porous silica film showing order at both the micron and the nanometer length scale. An infiltration method based on the spin-coating of the mesophase precursor onto a three-dimensional polystyrene colloidal crystal film allows a nanometer control tuning of the filling fraction of the mesoporous phase while preserving the optical quality of the template. These materials combine a high specific surface arising from the nanopores with increased mass transport and photonic crystal properties provided by the order of the macropores. Optical Bragg diffraction from these type of hierarchically ordered oxides is observed, allowing performing of optical monitoring of the different processes involved in the formation of the bimodal silica structure.

Efficient boron removal by using mesoporous matrices grafted with saccharides.

Highly efficient boron removal from water was achieved by using mesoporous silica materials functionalised with saccharides.

A severely interrupted germanate zeolite framework synthesised from isolated double four-ring units.

A new germanate zeolite framework has been prepared by first determining the reaction conditions required to prepare a molecular analogue of the zeolite double four-ring secondary building unit and then altering the conditions so as to encourage condensation of these units. The resultant material is a severely interrupted solid showing an unusual two dimensional channel system. It is also one of the most open frameworks yet discovered. The material was characterised using single crystal X-ray diffraction at a synchrotron source and solid state magic angle spinning NMR.

Toward the development of ionically controlled nanoscopic molecular gates.

An ionically controlled nanoscopic molecular gate has been developed by using functionalized mesoporous materials. The system shows that control of mass transport at nanometric scale can be achieved by using suitable rigid solids and pH-active molecules. The design principle suggests new perspectives in the search of ionically tuned tailored materials and devices with a fine control of mass transport for new applications in fields such as drug delivery, selective removal of toxic species, sensing, or catalysis.

An X-ray diffraction and MAS NMR study of the thermal expansion properties of calcined siliceous ferrierite.

Powder and single-crystal X-ray diffraction, combined with MAS NMR measurements, has been used to study the thermal expansion of siliceous zeolite ferrierite as it approaches a second-order displacive phase transition from a low-symmetry (Pnnm) to a high-symmetry (Immm) structure. Below the transition temperature, ferrierite exhibits positive thermal expansivity. However, above the transition temperature a significant change in thermal behavior is seen, and ferrierite becomes a negative thermal expansion material. Accurate variable-temperature single-crystal X-ray diffraction measurements confirm the transition temperature and allow the changes in average atomic position to be followed with temperature. The results from the single-crystal X-ray diffraction study can be correlated with (29)Si MAS NMR chemical shifts for the low-temperature phase. At low temperatures the results show that the positive thermal expansivity is driven by an overall increase in Si[bond]Si distances related to an increase in Si[bond]O[bond]Si bond angles. However, in the high-temperature phase the Si[bond]O[bond]Si angles are approximately invariant with temperature, and the negative thermal expansion in this case is caused by transverse vibrations of the Si[bond]O[bond]Si units.

Synthesis and structure of fluoride-containing GeO2 analogues of zeolite double four-ring building units.

Double four-membered ring (D4R) anionic building units [Ge8O12(OH)8F]- have been synthesised hydrothermally and their structures solved from powder X-ray diffraction.

Combined solid state NMR and X-ray diffraction investigation of the local structure of the five-coordinate silicon in fluoride-containing as-synthesized STF zeolite.

The local structure of the [SiO(4/2)F]- unit in fluoride-containing as-synthesized STF zeolite has been experimentally determined by a combination of solid-state NMR and microcrystal X-ray diffraction to be very close to trigonal bipyramidal. Because the fluoride ions are disordered over two sites, the resulting local structure of the [SiO(4/2)F]- unit from a conventional XRD refinement is an average between tetrahedral SiO(4/2) and five-coordinate [[SiO(4/2)F]-, giving an apparent F-Si distance longer than expected. The correct F-Si distance was determined by slow spinning MAS and fast spinning (19)F/(29)Si CP and REDOR solid-state NMR experiments and found to be between 1.72 and 1.79 A. In light of this, the X-ray structure was re-refined, including the disorder at Si3. The resulting local structure of the [SiO(4/2)F]- unit was very close to trigonal bipyramidal with a F-Si distance of 1.744 (6) A, in agreement with the NMR results and the prediction of Density Functional Theory calculations. In addition, further evidence for the existence of a covalent F-Si bond is provided by a (19)F-->(29)Si refocused INEPT experiment. The resonance for the five-coordinate species at -147.5 ppm in the (29)Si spectrum is a doublet due to the (19)F/(29)Si J-coupling of 165 Hz. The peaks in this doublet have remarkably different effective chemical shift anisotropies due to the interplay of the CSA, dipolar coupling, and J-coupling tensors. The distortions from tetrahedral geometry of the neighboring silicon atoms to the five-coordinate Si3 atom are manifested in increased delta(aniso) values. This information, along with F-Si distances measured by (19)F-->(29)Si CP experiments, makes it possible to assign half of the (29)Si resonances to unique tetrahedral sites. As well as determining the local geometry of the [SiO(4/2)F]- unit, the work presented here demonstrates the complementarity of the solid-state NMR and X-ray diffraction techniques and the advantages of using them together.

Toward inorganic electrides.

Electrides are materials in which alkali metals (Li through Cs) ionize to form bound alkali cations and "excess" electrons. The electrons reside in large cavities or channels or both in the host lattice. We report here the first synthesis of thermally stable inorganic electrides with cation-to-electron ratios of 1:1 as in organic electrides. Although alkali metal adducts to alumino-silicate zeolites are well known, the cation-to-electron ratio is generally 3:1 or greater because these zeolites contain alkali cations prior to incorporation of the alkali metal. In this work, two pure silica zeolites, ITQ-4and ITQ-7, with pore diameters of approximately 7 A, absorb up to 40 wt % cesium from the vapor phase (even at room temperature). The other alkali metals (except Li) can also be introduced at elevated temperatures. The optical and magnetic properties of the cesium-loaded samples suggest ionization to form Cs+ and e- with substantial electron-spin pairing. The metal-loaded samples are stable to at least 100 degrees C and are able to reduce small aromatic molecules such as benzene and naphthalene to the radical anions within the pores of the zeolite.