ABSTRACT
A thermal desorption equipment introducing volatile organic compounds (VOCs) into the gas chromatographic/ mass spectrometric system (GC/MS) with simultaneous sniffing (SNIFF) is a suitable method for identifying the volatile organic off-odor compounds formed during the extrusion coating process of low-density polyethylene. Fumes emitted during the extrusion coating process of three different plastic materials were collected at two different temperatures (285 and 315 degrees C) from an outgoing pipe and near an extruder. The VOCs of fumes were analyzed by drawing a known volume of air through the adsorbent tube filled with a solid adsorbent (Tenax GR). The air samples were analyzed by using a special thermal desorption device and GC/MS determination. The simultaneous sniffing was carried out to detect off-odors and to assist in the identification of those compounds that contribute to tainting and smelling. The amounts of off-odor carbonyl compounds and the total content of the volatile organic compounds were determined. The most odorous compounds were identified as carboxylic acids while the majority of the volatile compounds were hydrocarbons. The detection and quantification of carboxylic acids were based on the characteristic ions of their mass spectra. The higher the extrusion temperature the more odors were detected. An important observation was that the total concentration of volatiles was dependent not only on the extrusion temperature but also on the plastic material.
ABSTRACT
The compounds that cause off-flavours in plastics, have been recognized mainly as carbonyl compounds (aldehydes, ketones and esters). They occur in low concentrations, and due to their low-threshold odour concentrations, their typical odours were identified. Most of these off-flavour compounds are volatile. Chemical analysis of smelling compounds requires a very sensitive method with a high-resolution capability. The analysis of volatile organic compounds (VOCs) in high density polyethene (HD-PE) granules and waters in which the granules have been shaken for 4 h, were carried out by gas chromatography-mass spectrometry-sniffing system (GC-MS-SNIFF) and by gas chromatography-fourier transform infrared spectroscopy-sniffing system (GC-FTIR-SNIFF). A purge-and-trap technique was used to introduce the VOCs from samples into the gas chromatograph. Leaching waters of HD-PE granules were also evaluated by panel. This panel agreed upon six descriptive attributes for odour: sweet, chemical, stale, dusty, foul and floor-cloth. The attributes for taste were: sweet, metallic, stony, pungent, dusty, plastic, foul, stink bug and candle grease.
