Food oral processing: conversion of food structure to textural perception.

Food oral processing includes all muscle activities, jaw movements, and tongue movements that contribute to preparing food for swallowing. Simultaneously, during the transformation of food structure to a bolus, a cognitive representation of food texture is formed. These physiological signals detected during oral processing are highly complex and dynamic in nature because food structure changes continuously due to mechanical and biochemical breakdown coupled with the lubricating action of saliva. Multiple and different sensations are perceived at different stages of the process. Although much work has focused on factors that determine mechanical (e.g., rheological and fracture) and sensory properties of foods, far less attention has been paid to linking food transformations that occur during oral processing with sensory perception of texture. Understanding how food structure influences specific patterns of oral processing and how these patterns relate to specific textural properties and their cognitive representations facilitates the design of foods that are nutritious, healthy, and enjoyable.

The influence of experimental manipulations on chewing speed during in vivo laboratory research in tufted capuchins (Cebus apella).

Even though in vivo studies of mastication in living primates are often used to test functional and adaptive hypotheses explaining primate masticatory behavior, we currently have little data addressing how experimental procedures performed in the laboratory influence mastication. The obvious logistical issue in assessing how animal manipulation impacts feeding physiology reflects the difficulty in quantifying mechanical parameters without handling the animal. In this study, we measured chewing cycle duration as a mechanical variable that can be collected remotely to: 1) assess how experimental manipulations affect chewing speed in Cebus apella, 2) compare captive chewing cycle durations to that of wild conspecifics, and 3) document sources of variation (beyond experimental manipulation) impacting captive chewing cycle durations. We find that experimental manipulations do increase chewing cycle durations in C. apella by as much as 152 milliseconds (ms) on average. These slower chewing speeds are mainly an effect of anesthesia (and/or restraint), rather than electrode implantation or more invasive surgical procedures. Comparison of captive and wild C. apella suggest there is no novel effect of captivity on chewing speed, although this cannot unequivocally demonstrate that masticatory mechanics are similar in captive and wild individuals. Furthermore, we document significant differences in cycle durations due to inter-individual variation and food type, although duration did not always significantly correlate with mechanical properties of foods. We advocate that the significant reduction in chewing speed be considered as an appropriate qualification when applying the results of laboratory-based feeding studies to adaptive explanations of primate feeding behaviors.

The morphology of the masticatory apparatus facilitates muscle force production at wide jaw gapes in tree-gouging common marmosets (Callithrix jacchus).

Common marmosets (Callithrix jacchus) generate wide jaw gapes when gouging trees with their anterior teeth to elicit tree exudate flow. Closely related cotton-top tamarins (Saguinus oedipus) do not gouge trees but share similar diets including exudates. Maximizing jaw opening theoretically compromises the bite forces that marmosets can generate during gouging. To investigate how jaw-muscle architecture and craniofacial position impact muscle performance during gouging, we combine skull and jaw-muscle architectural features to model muscle force production across a range of jaw gapes in these two species. We incorporate joint mechanics, resting sarcomere length and muscle architecture estimates from the masseter and temporalis to model muscle excursion, sarcomere length and relative tension as a function of joint angle. Muscle excursion from occlusion to an estimated maximum functional gape of 55 deg. was smaller in all regions of the masseter and temporalis of C. jacchus compared with S. oedipus except the posterior temporalis. As a consequence of reduced muscle excursion distributed over more sarcomeres in series (i.e. longer fibers), sarcomere length operating ranges are smaller in C. jacchus jaw muscles across this range of gapes. This configuration allows C. jacchus to act on a more favorable portion of the length-tension curve at larger gapes and thereby generate relatively greater tension in these muscles compared with S. oedipus. Our results suggest that biting performance during tree gouging in common marmosets is improved by a musculoskeletal configuration that reduces muscle stretch at wide gapes while simultaneously facilitating comparatively large muscle forces at the extremes of jaw opening.

Morphometric testing of structural hypotheses of the supraorbital region in modern humans.

Our understanding of the functional morphology of the primate supraorbital region is based largely on previous morphometric and in vivo mechanical tests of hypotheses in non-human anthropoids. Prior tests of two structural hypotheses explaining morphological variation in the supraorbital region, the craniofacial size hypothesis and the spatial hypothesis, did not fully consider modern humans. We extend these previous findings to include modern humans by conducting morphometric tests of these two hypotheses in a sample of adult Melanesian crania. Morphometric correlates of structural predictions for the craniofacial size and spatial hypotheses were developed and compared to measurements of the supraorbital region via bivariate product-moment correlations. Measurements of the supraorbital region are significantly correlated with a craniofacial size estimate across individuals from this Melanesian sample. This result supports the prediction of the craniofacial size hypothesis that the magnitude of the supraorbital region is proportional to craniofacial size. The predicted link between the degree of neural-orbital disjunction and the magnitude of the supraorbital region, explicated in the spatial hypothesis, receives mixed support in the correlation analysis. These two results agree with previous research indicating that support for the craniofacial size and spatial hypotheses can be found across and within anthropoid primate species, including modern humans. Correlational support for both the craniofacial size and spatial hypotheses suggests multiple factors influence variation in the modern human supraorbital region. Thus, a single hypothesis cannot fully account for modern human variation in this region. The low bivariate correlation coefficients in this study further question whether existing hypotheses can adequately explain morphological variation in the supraorbital region in a primate population sample. Novel functional, structural, behavioral and developmental ideas must be explored if we are to better understand morphological variation in the modern human supraorbital region.

Evolution of anthropoid jaw loading and kinematic patterns.

Major transformations in the skull and masticatory system characterized the evolution of crown anthropoids. To offer further insight into the phylogenetic and arguably adaptive significance of specific primate mandibular loading and kinematic patterns, allometric analyses of metric parameters linked to masticatory function are performed within and between 47 strepsirhine and 45 recent anthropoid species. When possible, basal anthropoids are considered. These results are subsequently integrated with prior experimental and morphological work on primate skull form. As compared to strepsirhines, crown anthropoids have a vertically longer ascending ramus linked to a glenoid and condyle positioned relatively higher above the occlusal plane. Interestingly, anthropoids and strepsirhines do not exhibit different mean ratios of condylar to glenoid height, which suggests that both clades are similar in their ability to evenly distribute occlusal contacts and perhaps forces along the postcanine teeth. Thus, given the considerable suborder differences in the scaling of both glenoid and condylar height, we argue that much of this variation in jaw-joint height is linked to suborder differences in relative facial height due in turn to increased encephalization, basicranial flexion, and facial kyphosis in anthropoids. Due to a more elongate ascending ramus, anthropoids evince more vertically oriented masseters than like-sized strepsirhines. Having a relatively longer ramus and a more medially displaced lateral pterygoid plate, crown anthropoids exhibit medial pterygoids oriented similar to those of strepsirhines, but with a variably longer lever arm. As anthropoid masseters are less advantageously placed to effect transverse movements/forces, we argue that balancing-side deep-masseter activity underlying a wishboning loading regime serves to increase, or at least maintain, transverse levels of jaw movement and occlusal force at the end of the masticatory power stroke. Crown anthropoids are also more isognathic and isodontic than strepsirhines. A consideration of early anthropoids suggests that the crown anthropoid masticatory pattern, i.e., more vertical masseters due to a high condyle as well as greater isognathy and isodonty, occurred stepwise during stem anthropoid evolution. This appears to correspond to a more transverse, and perhaps progressively larger, power stroke across oligopithecids, parapithecids, and propliopithecids.

New body mass estimates for Omomys carteri, a middle Eocene primate from North America.

We report new body mass estimates for the North American Eocene primate Omomys carteri. These estimates are based on postcranial measurements and a variety of analytical methods, including bivariate regression, multiple regression, and principal components analysis (PCA). All body mass estimation equations show high coefficients of determination (R2), and some equations exhibit low prediction errors in accuracy tests involving extant species of body size similar to O. carteri. Equations derived from PCA-summarized data and multiple regression generally perform better than those based on single variables. The consensus of estimates and their statistics suggests a body mass range of 170-290 g. This range is similar to previous estimates for this species based on first molar area (Gingerich, J Hum Evol 10:345-374, 1981; Conroy, Int J Primatol 8:115-137, 1987).

Ontogeny, function, and scaling of the mandibular symphysis in papionin primates.

In vivo study of mastication in adult cercopithecine primates demonstrates a link between mandibular symphyseal form and resistance to "wishboning," or lateral transverse bending. Mechanical consideration of wishboning at the symphysis indicates exponentially higher stresses along the lingual surface with increasing symphyseal curvature. Lengthening the anteroposterior width of the symphysis acts to resist these higher loads. Interspecific adult cercopithecine allometries show that both symphyseal curvature and symphyseal width exhibit positive allometry relative to body mass. The experimental and allometric data support an hypothesis that the cercopithecine mandibular symphysis is designed to maintain functional equivalence--in this case dynamic strain similarity--in wishboning stress and strain magnitudes across adult cercopithecines. We test the hypothesis that functional equivalence during masticatory wishboning is maintained throughout ontogeny by calculating relative stress estimates from morphometric dimensions of the mandibular symphysis in two cercopithecine primates, Macaca fascicularis and M. nemestrina. Results indicate no significant differences in relative stress estimates among the two macaque ontogenies and an interspecific sample of adult papionin primates. Further, relative stress estimates do not change significantly throughout ontogeny in either species. These results offer the first evidence for the maintenance of functional equivalence in stress and strain levels during postnatal growth in a habitually loaded cranial structure. Scaling analyses demonstrate significant slope differences for both symphyseal curvature and width between the ontogenetic and interspecific samples. The distinct interspecific cercopithecine slopes are realized by a series of ontogenetic transpositions in both symphyseal curvature and width. Throughout papionin ontogeny, symphyseal curvature increases with less negative allometry, while symphysis width increases with less positive allometry versus the interspecific pattern. As symphyseal curvature and width are inversely proportional to one another in estimating relative stresses, functionally equivalent stress levels are maintained both ontogenetically and interspecifically, because the relatively slower rate of allometric increase in symphyseal curvature during growth is compensated for by a slower rate of allometric increase in symphyseal width. These results indicate the primacy of maintaining functional equivalence during growth and the need for ontogenetic data in understanding the evolutionary processes that affect form-function relations as well as the interspecific patterning of adult form across a clade.