ABSTRACT
Copper acetate and related metal salt films react directly with hydrogen sulfide at room temperature to form metal sulfides, resulting in conductivity changes as large as 108. The observed changes in conductivity are related to the solubility product constant (Ksp) and the difference in conductivity between the metal salt and the resulting metal sulfide. A smaller Ksp indicates a more stable metal sulfide and, therefore, greater metal salt reactivity. Polyaniline nanofiber/metal salt composites were also examined and show metal sulfide conversion with changes in resistance up to 106. The direct electrical measurement of the conversion of metal salt to metal sulfide has the potential to be the basis of a new type of sensitive, thin-film chemical sensor.
ABSTRACT
Hydrogen causes a reversible decrease in the resistance of a thin film of camphorsulfonic acid doped polyaniline nanofibers. For a 1% mixture of hydrogen in nitrogen, a 3% decrease in resistance is observed (DeltaR/R = -3%). The hydrogen response is completely suppressed in the presence of humidity. In contrast, oxygen does not inhibit the hydrogen response. A deuterium isotope effect on the sensor response is observed in which hydrogen gives a larger response than deuterium: (DeltaR/R)H/(DeltaR/R)D = 4.1 +/- 0.4. Mass sensors using nanofiber films on a quartz crystal microbalance also showed a comparable deuterium isotope effect: DeltamH/DeltamD = 2.3 +/- 0.2 or DeltanH/DeltanD = 4.6 +/- 0.4 on a molar basis. The resistance change of polyaniline nanofibers is about an order of magnitude greater than conventional polyaniline, consistent with a porous, high-surface-area nanofibrillar film structure that allows for better gas diffusion into the film. A plausible mechanism involves hydrogen bonding to the amine nitrogens along the polyaniline backbone and subsequent dissociation. The inhibitory effect of humidity is consistent with a stronger interaction of water with the polyaniline active sites that bind to hydrogen. These data clearly demonstrate a significant interaction of hydrogen with doped polyaniline and may be relevant to recent claims of hydrogen storage by polyaniline.
ABSTRACT
The conjugated polymer polyaniline is a promising material for sensors, since its conductivity is highly sensitive to chemical vapors. Nanofibers of polyaniline are found to have superior performance relative to conventional materials due to their much greater exposed surface area. A template-free chemical synthesis is described that produces uniform polyaniline nanofibers with diameters below 100 nm. The interfacial polymerization can be readily scaled to make gram quantities. Resistive-type sensors made from undoped or doped polyaniline nanofibers outperform conventional polyaniline on exposure to acid or base vapors, respectively. The nanofibers show essentially no thickness dependence to their sensitivity.
ABSTRACT
Polyaniline nanofibers with uniform diameters between 30 and 50 nm can be made in bulk quantities through a facile aqueous/organic interfacial polymerization method at ambient conditions. The nanofibers have lengths varying from 500 nm to several micrometers and form interconnected networks. Thin films made of the nanofibers have superior performance in both sensitivity and time response to vapors of acid (HCl) and base (NH3).
