Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 7 de 7
Filter
Add more filters










Database
Language
Publication year range
1.
Opt Express ; 23(13): 16857-65, 2015 Jun 29.
Article in English | MEDLINE | ID: mdl-26191697

ABSTRACT

A novel high-speed Mach-Zehnder modulator (MZM) fully integrated into a 90 nm CMOS process is presented. The MZM features 'double-pass' optical phase shifter segments, and the first use of integrated inductors in a 'velocity-matched' distributed-electrode configuration.

2.
Opt Express ; 21(8): 9722-33, 2013 Apr 22.
Article in English | MEDLINE | ID: mdl-23609681

ABSTRACT

We demonstrate optical modulation rates exceeding the conventional cavity linewidth limit using a silicon coupling modulated microring. Small-signal measurements show coupling modulation was free of the parasitic cavity linewidth limitations at rates at least 6× the cavity linewidth. Eye diagram measurements show coupling modulation achieved data rates > 2× the rate attainable by conventional intracavity phase modulation. We propose to use DC-balanced encoding to mitigate the inter-symbol interference in coupling modulation. Analysis shows that coupling modulation can be more efficient than intracavity modulation for large output swings and high-Q resonators. Coupling modulation enables very high-Q resonant modulators to be simultaneously low-power and high-speed, features which are mutually incompatible in typical resonant modulators studied to date.


Subject(s)
Models, Theoretical , Refractometry/instrumentation , Surface Plasmon Resonance/instrumentation , Computer Simulation , Computer-Aided Design , Equipment Design , Equipment Failure Analysis , Light , Miniaturization , Scattering, Radiation
3.
Opt Express ; 20(24): 26411-23, 2012 Nov 19.
Article in English | MEDLINE | ID: mdl-23187495

ABSTRACT

A silicon microring modulator utilizing an interleaved p-n junction phase shifter with a V(π)L of 0.76 V-cm and a minimum off-resonance insertion loss of less than 0.2 dB is demonstrated. The modulator operates at 25 Gbps at a drive voltage of 1.6 V and 2-3 dB excess optical insertion loss, conditions which correspond to a power consumption of 471 fJ/bit. Eye diagrams are characterized at up to 40 Gbps, and transmission is demonstrated across more than 10 km of single-mode fiber with minimal signal degradation.


Subject(s)
Optical Devices , Semiconductors , Signal Processing, Computer-Assisted/instrumentation , Silicon , Telecommunications/instrumentation , Artifacts , Computer-Aided Design , Equipment Design , Humans , Miniaturization
4.
Opt Express ; 16(2): 1280-99, 2008 Jan 21.
Article in English | MEDLINE | ID: mdl-18542202

ABSTRACT

The strong dispersion and large third-order nonlinearity in Si photonic wires are intimately linked in the optical physics needed for the optical control of phase. By carefully choosing the waveguide dimensions, both linear and nonlinear optical properties of Si wires can be engineered. In this paper we provide a review of the control of phase using nonlinear-optical effects such as self-phase and cross-phase modulation in dispersion-engineered Si wires. The low threshold powers for phase-changing effects in Si-wires make them potential candidates for functional nonlinear optical devices of just a few millimeters in length.


Subject(s)
Electric Wiring/instrumentation , Fiber Optic Technology/instrumentation , Optics and Photonics/instrumentation , Silicon/chemistry , Equipment Design , Equipment Failure Analysis , Nonlinear Dynamics , Optical Devices
5.
Nature ; 414(6861): 289-93, 2001 Nov 15.
Article in English | MEDLINE | ID: mdl-11713524

ABSTRACT

Photonic bandgap crystals can reflect light for any direction of propagation in specific wavelength ranges. This property, which can be used to confine, manipulate and guide photons, should allow the creation of all-optical integrated circuits. To achieve this goal, conventional semiconductor nanofabrication techniques have been adapted to make photonic crystals. A potentially simpler and cheaper approach for creating three-dimensional periodic structures is the natural assembly of colloidal microspheres. However, this approach yields irregular, polycrystalline photonic crystals that are difficult to incorporate into a device. More importantly, it leads to many structural defects that can destroy the photonic bandgap. Here we show that by assembling a thin layer of colloidal spheres on a silicon substrate, we can obtain planar, single-crystalline silicon photonic crystals that have defect densities sufficiently low that the bandgap survives. As expected from theory, we observe unity reflectance in two crystalline directions of our photonic crystals around a wavelength of 1.3 micrometres. We also show that additional fabrication steps, intentional doping and patterning, can be performed, so demonstrating the potential for specific device applications.

6.
Article in English | MEDLINE | ID: mdl-11969849

ABSTRACT

We report on experimental measurements of the propagation behavior of short optical pulses in a three-dimensional photonic crystal in the visible spectrum. The propagation delay of 70 fs light pulses transmitted through a sample of a fcc synthetic opal at frequencies lying in a photonic stop band was measured directly using a time-of-flight technique. Taking into account spectral reshaping of the transmitted pulses as well as the residual frequency chirp of the incoming pulses, it is found that the pulses significantly slow down at the photonic band edges.

SELECTION OF CITATIONS
SEARCH DETAIL
...