Effect of different co-foaming agents on PFAS removal from the environment by foam fractionation.

Per- and poly-fluoroalkyl substances (PFAS) are recalcitrant, synthetic chemicals that are ubiquitous in the environment because of their widespread use in a variety of consumer and industrial products. PFAS contamination has become an increasing issue in recent years, which needs to be urgently addressed. Foam fractionation is emerging as a potential remediation option that removes PFAS by adsorption to the surface of rising air bubbles which are removed from the system as a foam. PFAS concentrations in the environment are often not sufficient to allow for formation of a foam by itself and often a co-foaming agent is required to be added to enhance the foamability of the solution. In this study, the effect of different classes of co-foaming agents, anionic, non-ionic, zwitterionic and cationic surfactants on the removal of PFAS with varying fluorocarbon chain length from 3 to 8 in a foam fractionation process have been investigated. Evaluation of the air-water interface partitioning coefficient (k') in addition with surface tension and PFAS removal results support the contention that using a co-foaming agent with the opposite charge to the PFAS in question significantly facilitates the adsorption of PFAS to the air-water interface, enhancing the efficiency of the process. Using the non-ionic surfactant (no headgroup electrostatic interaction with PFAS), as a reference, it was observed, in terms of PFAS separation and rate of PFAS removal, that anionic co-surfactant performed worst, zwitterionic was better, and cationic co-surfactant performed best. All of the PFAS species were able to be removed below the limit of detection (0.05 µg/L) after 45 minutes of foaming time with the cationic surfactant.

Assessment of Mobilization Potential of Per- and Polyfluoroalkyl Substances for Soil Remediation.

This study investigated the mobilization of a wide range of per- and polyfluoroalkyl substances (PFASs) present in aqueous film-forming foams (AFFFs) in water-saturated soils through one-dimensional (1-D) column experiments with a view to assessing the feasibility of their remediation by soil desorption and washing. Results indicated that sorption/desorption of most of the shorter-carbon-chain PFASs (C ≤ 6) in soil reached greater than 99% rapidly─after approximately two pore volumes (PVs) and were well predicted by an equilibrium transport model, indicating that they will be readily removed by soil washing technologies. In contrast, the equilibrium model failed to predict the mobilization of longer-chain PFASs (C ≥ 7), indicating the presence of nonequilibrium sorption/desorption (confirmed by a flow interruption experiment). The actual time taken to attain 99% sorption/desorption was up to 5 times longer than predicted by the equilibrium model (e.g., ∼62 PVs versus ∼12 PVs predicted for perfluorooctane sulfonate (PFOS) in loamy sand). The increasing contribution of hydrophobic interactions over the electrostatic interactions is suggested as the main driving factor of the nonequilibrium processes. The inverse linear relationship (R2 = 0.6, p < 0.0001) between the nonequilibrium mass transfer rate coefficient and the Freundlich sorption coefficient could potentially be a useful means for preliminary evaluation of potential nonequilibrium sorption/desorption of PFASs in soils.

Biochar sorption of perfluoroalkyl substances (PFASs) in aqueous film-forming foams-impacted groundwater: Effects of PFASs properties and groundwater chemistry.

The widespread use of per- and polyfluoroalkyl substances (PFASs)-related products such as aqueous film-forming foams (AFFF) has led to increasing contamination of groundwater systems. The concentration of PFASs in AFFF-impacted groundwater can be several orders of magnitude higher than the drinking water standard. There is a need for a sustainable and effective sorbent to remove PFASs from groundwater. This work aims to investigate the sorption of PFASs in groundwater by biochar column. The specific objectives are to understand the influences of PFASs properties and groundwater chemistry to PFASs sorption by biochar. The PFASs-spiked Milli-Q water (including 19 PFASs) and four aqueous film-forming foams (AFFF)-impacted groundwater were used. The partitioning coefficients (log Kd) of long chain PFASs ranged from 0.77 to 4.63 while for short chain PFASs they remained below 0.68. For long chain PFASs (C ≥ 7), log Kd increased by 0.5 and 0.8 for each CF2 moiety of PFCAs and PFSAs, respectively. Dissolved organic matter (DOM) was the most influential factor in PFASs sorption over pH, salinity, and specific ultraviolet absorbance (SUVA). DOM contained hydrophobic compounds and metal ions which can form DOM-PFASs complexes to provide more sorption sites for PFASs. The finding is useful for executing PFASs remediation by biochar filtration column, especially legacy long chain PFASs, for groundwater remediation.

Effect of calcium peroxide pretreatment on the remediation of sulfonamide antibiotics (SMs) by Chlorella sp.

This study investigated the effect of CaO2 pretreatment on sulfonamide antibiotics (SMs) remediation by Chlorella sp. Results showed that a CaO2 dose ranging from 0.05 to 0.1 g/g biomass was the best and led to higher SMs removal efficacy 5-10% higher than the control. The contributions made by cometabolism and CaO2 in SMs remediation were very similar. Bioassimilation could remove 24% of sulfadiazine (SDZ) and sulfamethazine (SMZ), and accounted for 38% of sulfamethoxazole (SMX) remediation. Pretreatment by CaO2 wielded a positive effect on microalgae. The extracellular polymeric substances (EPS) level of the CaO2 pretreatment microalgae was three times higher when subjected to non-pretreatment. For the long-term, pretreatment microalgae removed SMs 10-20% more than the non-pretreatment microalgae. Protein fractions of EPS in continuous operation produced up to 90 mg/L for cometabolism. For bioassimilation, SMX intensity of the pretreatment samples was 160-fold less than the non-treatment one. It indicated the CaO2 pretreatment has enhanced the biochemical function of the intracellular environment of microalgae. Peroxidase enzyme involved positively in the cometabolism and degradation of SMs to several metabolites including ring cleavage, hydroxylation and pterin-related conjugation.

Co-culture of microalgae-activated sludge for wastewater treatment and biomass production: Exploring their role under different inoculation ratios.

In this study, mixed culture (microalgae:activated sludge) of a photobioreactor (PBR) were investigated at different inoculation ratios (1:0, 9:1, 3:1, 1:1, 0:1 wt/wt). This work was not only to determine the optimal ratio for pollutant remediation and biomass production but also to explore the role of microorganisms in the co-culture system. The results showed high total biomass concentrations were obtained from 1:0 and 3:1 ratio being values of 1.06, 1.12 g L-1, respectively. Microalgae played a dominant role in nitrogen removal via biological assimilation while activated sludge was responsible for improving COD removal. Compared with the single culture of microalgae, the symbiosis between microalgae and bacteria occurred at 3:1 and 1:1 ratio facilitated a higher COD removal by 37.5-45.7 %. In general, combined assessment based on treatment performance and biomass productivity facilitated to select an optimal ratio of 3:1 for the operation of the co-culture PBR.

Micropollutants cometabolism of microalgae for wastewater remediation: Effect of carbon sources to cometabolism and degradation products.

This study investigated the impacts of selective sole carbon source-induced micropollutants (MPs) cometabolism of Chlorella sp. by: (i) extracellular polymeric substances (EPS), superoxide dismutase and peroxidase enzyme production; (ii) MPs removal efficiency and cometabolism rate; (iii) MPs' potential degradation products identification; and (iv) degradation pathways and validation using the Eawag database to differentiate the cometabolism of Chlorella sp. with other microbes. Adding the sole carbon sources in the presence of MPs increased EPS and enzyme concentrations from 2 to 100-fold in comparison with only sole carbon sources. This confirmed that MPs cometabolism had occurred. The removal efficiencies of tetracycline, sulfamethoxazole, and bisphenol A ranged from 16-99%, 32-92%, and 58-99%, respectively. By increasing EPS and enzyme activity, the MPs concentrations accumulated in microalgae cells also fell 400-fold. The cometabolism process resulted in several degradation products of MPs. This study drew an insightful understanding of cometabolism for MPs remediation in wastewater. Based on the results, proper carbon sources for microalgae can be selected for practical applications to remediate MPs in wastewater while simultaneously recovering biomass for several industries and gaining revenue.

Selective carbon sources and salinities enhance enzymes and extracellular polymeric substances extrusion of Chlorella sp. for potential co-metabolism.

This study investigated the extracellular polymeric substance (EPS) and enzyme extrusion of Chlorella sp. using seven carbon sources and two salinities for potential pollutant co-metabolism. Results indicated that the levels of biomass, EPS and enzymes of microalgae cultured with glucose and saccharose outcompeted other carbon sources. For pigment production, glycine received the highest chlorophyll and carotene, up to 10 mg/L. The EPS reached 30 mg/L, having doubled the amount of protein than carbohydrate. For superoxide dismutase and peroxidase enzymes, the highest concentrations were beyond 60 U/ml and 6 nmol/d.ml, respectively. This amount could be potentially used for degrading 40% ciprofloxacin of concentration 2000 µg/L. When increasing salinity from 0.1% to 3.5%, the concentrations of pigment, EPS and enzymes rose 3 to 30 times. These results highlighted that certain carbon sources and salinities could induce Chlorella sp. to produce EPS and enzymes for pollutant co-metabolism and also for revenue-raising potential.

Removal and monitoring acetaminophen-contaminated hospital wastewater by vertical flow constructed wetland and peroxidase enzymes.

Hospital wastewater contains acetaminophen (ACT) and nutrient, which need adequate removal and monitoring to prevent impact to environment and community. This study developed a pilot scale vertical flow constructed wetland (CW) to (1) remove high-dose ACT and pollutants in hospital wastewater and (2) identify the correlation of peroxidase enzyme extruded by Scirpus validus and pollutants removal efficiency. By that correlation, a low-cost method to monitor pollutants removal was drawn. Plants, such as Scirpus validus, generated peroxidase enzymes to alleviate pollutants' stress. Results showed that the CW removed 3.5 to 6 logs of initial concentration 10 mg ACT/L to a recommended level for drinking water. The CW eliminated COD, TKN and TP efficiently, meeting the wastewater discharged standards of Thailand and Vietnam. By various multivariable regression models, concentrations of ACT in CW effluent and enzymes in S. validus exhibited a significant correlation (p < 0.01, R2 = 68.3%). These findings suggested that (i) vertical flow CW could remove high-dose ACT and nutrient and (ii) peroxidase enzymes generated in S. validus, such as soluble and covalent ones, could track ACT removal efficiency. This would help to reduce facilities and analytical cost of micro-pollutants.

A critical review on designs and applications of microalgae-based photobioreactors for pollutants treatment.

The development of the photobioreactors (PBs) is recently noticeable as cutting-edge technology while the correlation of PBs' engineered elements such as modellings, configurations, biomass yields, operating conditions and pollutants removal efficiency still remains complex and unclear. A systematic understanding of PBs is therefore essential. This critical review study is to: (1) describe the modelling approaches and differentiate the outcomes; (2) review and update the novel technical issues of PBs' types; (3) study microalgae growth and control determined by PBs types with comparison made; (4) progress and compare the efficiencies of contaminants removal given by PBs' types and (5) identify the future perspectives of PBs. It is found that Monod model's shortcoming in internal substrate utilization is well fixed by modified Droop model. The corroborated data also remarks an array of PBs' types consisting of flat plate, column, tubular, soft-frame and hybrid configuration in which soft-frame and hybrid are the latest versions with higher flexibility, performance and smaller foot-print. Flat plate PBs is observed with biomass yield being 5 to 20 times higher than other PBs types while soft-frame and membrane PBs can also remove pharmaceutical and personal care products (PPCPs) up to 100%. Looking at an opportunity for PBs in sustainable development, the flat plate PBs are applicable in PB-based architectures and infrastructures indicating an encouraging revenue-raising potential.

Identification of the pollutants' removal and mechanism by microalgae in saline wastewater.

This study investigated the growth dynamics of a freshwater and marine microalgae with supported biochemical performance in saline wastewater, the pollutants assimilation by a developed method, and the mechanism of salinity's effect to pollutants assimilation. Maximal biomass yield was 400-500 mg/L at 0.1-1% salinity while the TOC, NO3--N, PO43--P were eliminated 39.5-92.1%, 23-97.4% and 7-30.6%, respectively. The biomass yield and pollutants removal efficiencies reduced significantly when salinity rose from 0.1 to 5%. The freshwater Chlorella vulgaris performed its best with a focus on TOC removal at 0.1% salinity. The marine Chlorella sp. was prominent for removing NO3--N at 0.1-1% salinity. Through the developed method, the freshwater C. vulgaris competed to the marine microalgae referring to pollutants assimilation up to 5% salinity. This study unveiled the mechanism of salinity's effect with evidence of salt layer formation and salt accumulation in microalgae.

Effects of nutrient ratios and carbon dioxide bio-sequestration on biomass growth of Chlorella sp. in bubble column photobioreactor.

Photobioreactor technology, especially bubble column configuration, employing microalgae cultivation (e.g., Chlorella sp.), is an ideal man-made environment to achieve sufficient microalgae biomass through its strictly operational control. Nutrients, typically N and P, are necessary elements in the cultivation process, which determine biomass yield and productivity. Specifically, N:P ratios have certain effects on microalgae's biomass growth. It is also attractive that microalgae can sequester CO2 by using that carbon source for photosynthesis and, subsequently, reducing CO2 emission. Therefore, this study aims to investigate the effect of N:P ratios on Chlorella sp.'s growth, and to study the dynamic of CO2 fixation in the bubble column photobioreactor. According to our results, N:P ratio of 15:1 could produce the highest biomass yield (3568 ±â€¯158 mg L-1). The maximum algae concentration was 105 × 106 cells mL-1, receiving after 92 h. Chlorella sp. was also able to sequester CO2 at 28 ±â€¯1.2%, while the specific growth rate and carbon fixation rate were observed at 0.064 h-1 and 68.9 ±â€¯1.91 mg L-1 h-1, respectively. The types of carbon sources (e.g., organic and inorganic carbon) possessed potential impact on microalgae's cultivation.