Deposition of chemically reactive and repellent sites on biosensor chips for reduced non-specific binding.

The performances of new polymeric materials with excellent optical properties and good machinability have led the biomedical diagnostics industry to develop cheap disposable biosensor platforms appropriate for point of care applications. Zeonor, a type of cycloolefin polymer (COP), is one such polymer that presents an excellent platform for biosensor chips. These polymer substrates have to be modified to have suitable physico-chemical properties for immobilizing proteins. In this work, we have demonstrated the amine functionalization of COP substrates, by plasma enhanced chemical vapour deposition (PECVD), through codeposition of ethylene diamine and 3-aminopropyltriethoxysilane precursors, for building chemistries on the plastic chip. The elemental composition, adhesion, ageing and reactivity of the plasma polymerized film were examined. The Si-O functionality present in amino silane contributed for a good interfacial adhesion of the coating to COP substrates and also acted as a network building layer for plasma polymerization. Wet chemical modification was then carried out on the amine functionalized chips to create chemically reactive isothiocyanate sites and protein repellent fluorinated sites on the same chip. The density of the reactive and repellent sites was altered by choosing appropriate mixtures of homofunctional phenyldiisothiocyanate (PDITC), pentafluoroisothiocyanate (5FITC) and phenylisothiocyanate (PITC) compounds. By tailoring the density of reactive binding sites and protein repellent sites, the non-specific binding of ssDNA has been decreased to a significant extent.

Reactive amine surfaces for biosensor applications, prepared by plasma-enhanced chemical vapour modification of polyolefin materials.

Here we have demonstrated a solventless plasma-based process that integrates low-cost, high throughput, high reproducibility and ecofriendly process for the functionalization of the next-generation point-of-care device platforms. Amine functionalities were deposited by plasma-enhanced chemical vapour deposition (PECVD) using a new precursor. The influence of the plasma RF power and the deposition time on surfacial properties, as well as their effect on the reactivity and content of amino groups was investigated. The key process determinants were to have a sufficient power in the plasma to activate and partially fragment the monomer but not too much as to lose the reactive amine functionality, and sufficient deposition time to develop a reactive layer but not to consume or erode the amine reactivity. An immunoassay performed using human immunoglobulin (IgG) as a model analyte showed an improvement of the detection limit by two orders of magnitude beyond that obtained using devices activated by liquid-phase reaction.

Protein pattern transfer for biosensor applications.

This paper presents a very simple, industrially scalable method for transferring a high-resolution, biologically active protein pattern from one substrate to another. We demonstrate the transfer of a protein pattern formed initially by microcontact printing from a silicon surface (to which this form of printing is applicable) onto a glass or polymer substrate, almost independently of the surface/bulk properties of the second substrate. A very thin, spin-coated layer of a sugar is used to preserve the structure and organization of proteins during the subsequent plasma deposition of a siloxane polymer, after which the protein pattern could simply be peeled off the silicon substrate and glued onto any other desired substrate.

Plasma surface modification of cyclo-olefin polymers and its application to lateral flow bioassays.

The modification of cyclo-olefin polymer Zeonor by plasma-enhanced chemical vapor deposition to form a silica-like surface and evaluation of its application for lateral flow bioassays applications are discussed in this study. The SiOx layer was extensively characterized using contact angle measurements, atomic force microscopy, and Fourier transform infrared spectroscopy in attenuated total internal reflectance mode where the presence of a uniform SiOx film was clearly identified. The SiOx modification resulted in a surface with enhanced wettability and excellent fluidic properties when combined with a hot-embossed micropillar capillary fill-based substrate. The SiOx surface also had the ability to accelerate the clotting of human plasma, which may have application in certain types of blood coagulation assays.

Titanium modified with layer-by-layer sol-gel tantalum oxide and an organodiphosphonic acid: a coating for hydroxyapatite growth.

Titanium and its alloys are widely used in surgical implants due to their appropriate properties like corrosion resistance, biocompatibility, and load bearing. Unfortunately when metals are used for orthopedic and dental implants there is the possibility of loosening over a long period of time. Surface modification is a good way to counter this problem. A thin tantalum oxide layer obtained by layer-by-layer (LBL) sol-gel deposition on top of a titanium surface is expected to improve biocorrosion resistance in the body fluid, biocompatibility, and radio-opacity. This elaboration step is followed by a modification of the tantalum oxide surface with an organodiphosphonic acid self-assembled monolayer, capable of chemically binding to the oxide surface, and also improving hydroxyapatite growth. The different steps of this proposed process are characterized by surfaces techniques like contact angle, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM).

Morphology of polystyrene films deposited by RF plasma.

A new plasma reactor, set up with a large planar inductively coupled source, is used for the first time to deposit a polymer coating (pPS) from a styrene monomer. This work is devoted to the relationship between external plasma parameters and substrate topography, and pPS coating morphology, which is investigated by scanning electron microscopy and atomic force microscopy. Stainless steel, gold and glass surfaces are used as substrates. It is clearly demonstrated that the film morphology can be controlled by adjustment of RF input power, pressure. The analysis performed further reveals that the pPS film's characteristics strongly depend on the substrate topography and its electrical potential during the discharge. Finally, the plasma duration also strongly influences the morphology of the films. The morphologies obtained include smooth films without any specific feature, worm-like structures, particles (nanometer- and micrometer-sized) associated along preferential directions and randomly distributed particles (micrometer-sized). The intrinsic topography of the substrate influences the film structure in the case of thin films (thickness lower than about 100 nm). Polymerization is suggested to take place at the surface in contact with the discharge rather than in the gas phase. Nucleation and growth start preferentially on substrate defects such as polishing scratches.

Influence of DNA condensation state on transfection efficiency in DNA/polymer complexes: an AFM and DLS comparative study.

Atomic force microscopy (AFM) is used to describe the formation process of polymer/DNA complexes. Two main objectives of this research are presented. The first one is to apply AFM as an effective tool to analyse DNA molecules and different polycation/DNA complexes in order to evaluate their degree of condensation (size and shape). The other one is to search for a relationship between the condensation state of DNA and its transfection efficiency. In this study, linear methacrylate based polymers and globular SuperFect polymers are used in order to induce DNA condensation. Ternary complexes, composed of methacrylate based polymers and polyethylene glycol (PEG)-based copolymers, are also investigated. AFM allows us to confirm good condensation conditions and relate them (or not) to transfection efficiencies. These AFM results (obtained after drying in air) are compared with measurements deduced from Dynamic Light Scattering (DLS) experiments performed in water. This comparison allowed us to identify the structural modifications resulting from deposition on the mica surface.

Electronic and molecular properties of an adsorbed protein monolayer probed by two-color sum-frequency generation spectroscopy.

Two-color sum-frequency generation spectroscopy (2C-SFG) is used to probe the molecular and electronic properties of an adsorbed layer of the green fluorescent protein mutant 2 (GFPmut2) on a platinum (111) substrate. First, the spectroscopic measurements, performed under different polarization combinations, and atomic force microscopy (AFM) show that the GFPmut2 proteins form a fairly ordered monolayer on the platinum surface. Next, the nonlinear spectroscopic data provide evidence of particular coupling phenomena between the GFPmut2 vibrational and electronic properties. This is revealed by the occurrence of two doubly resonant sum-frequency generation processes for molecules having both their Raman and infrared transition moments in a direction perpendicular to the sample plane. Finally, our 2C-SFG analysis reveals two electronic transitions corresponding to the absorption and fluorescence energy levels which are related to two different GFPmut2 conformations: the B (anionic) and I forms, respectively. Their observation and wavelength positions attest the keeping of the GFPmut2 electronic properties upon adsorption on the metallic surface.