Occurrence of ultrasonographic assessed placental abnormalities, treatments, pregnancy outcome, and subsequent fertility on a large warmblood stud farm: A retrospective field study.

Little is known about the incidence and outcome of high-risk pregnancies in equine practice and clinical studies on spontaneous occurring placentitis cases and treatments are missing. Therefore, the aims of this retrospective field study were to (1) describe the incidence and severity of ultrasonographic assessed placental abnormalities (UPA) in 4,192 pregnancies on a large commercial warmblood stud farm in 2017 - 2019 and (2) characterize these UPA cases and their pregnancy outcome. UPA severity (Placental abnormality score (PSc) 1-3; low to high), nine treatment regimens (TM1-9) used in UPA cases and treatment duration as well as subsequent fertility were analyzed in the group of UPA mares. The proportion of pregnancies affected by UPA was 4.2 % (n=177/4192). Placental abnormality severity was scored as PSc1 (51.4 %), PSc2 (32.8 %) and PSc3 (15.8 %). The generalized mixed model revealed PSc was affected by mare age and mare status (own pregnancy (OP) or embryo transfer recipient (ER)) (P=0.035) with ER mares having increased PSc compared with mares having their own pregnancy. Abortion occurred in 17/177 (9.6 %) UPA pregnancies. Overall, at the end of the next season, 61.1 % of UPA mares were pregnant, 32.0 % barren, and 6.9 % open (n=175). Pregnancy was established in 62/91(68.1 %) of mares with PSc1, 31/58 (53.4 %) with PSc2 and 14/26 (53.8 %) with PSc3. Most pregnancies were achieved in the first 81/107 (75.7 %) or second 18/107 (16.8 %) inseminated cycle. In conclusion, early detection and treatment of ultrasonographic assessed placental abnormalities can save high-risk pregnancies in > 90 % of cases with a satisfying subsequent fertility.

On-farm detection of claw lesions in dairy cows based on acoustic analyses and machine learning.

Claw lesions are a serious problem on dairy farms, affecting both the health and welfare of the cow. Automated detection of lameness with a practical, on-farm application would support the early detection and treatment of lame cows, potentially reducing the number and severity of claw lesions. Therefore, in this study, a method was proposed for the detection of claw lesions based on the acoustic analysis of a cow's gait. A panel was constructed to measure the impact sound of animals walking over it. The recorded impact sound was edited, and 640 sound files from 64 cows were analyzed. The classification of animal-lameness status was performed using a machine-learning process with a random forest algorithm. The gold standard was a 2-point scale of hoof-trimming results (healthy vs. affected), and 38 properties of the recorded sound files were used as influencing factors. A prediction model for classifying the cow lameness was built using a random forest algorithm. This was validated by comparing the reference output from hoof-trimming with the model output concerning the impact sound. Altering the likelihood settings and changing the cutoff value to predict lame animals improved the prediction model. At a cutoff at 0.4, a decreased false-negative rate was generated, and the false-positive rate only increased slightly. This model obtained a sensitivity of 0.81 and a specificity of 0.97. With this procedure, Cohen's Kappa value of 0.80 showed good agreement between model classification and diagnoses from hoof-trimming. In summary, the prediction model enabled the detection of cows with claw lesions. This study shows that lameness can be detected by machine learning from the impact sound of hoofs in dairy cows.

The rheostat in the membrane: BCL-2 family proteins and apoptosis.

Apoptosis, a mechanism for programmed cell death, has key roles in human health and disease. Many signals for cellular life and death are regulated by the BCL-2 family proteins and converge at mitochondria, where cell fate is ultimately decided. The BCL-2 family includes both pro-life (e.g. BCL-XL) and pro-death (e.g. BAX, BAK) proteins. Previously, it was thought that a balance between these opposing proteins, like a simple 'rheostat', could control the sensitivity of cells to apoptotic stresses. Later, this rheostat concept had to be extended, when it became clear that BCL-2 family proteins regulate each other through a complex network of bimolecular interactions, some transient and some relatively stable. Now, studies have shown that the apoptotic circuitry is even more sophisticated, in that BCL-2 family interactions are spatially dynamic, even in nonapoptotic cells. For example, BAX and BCL-XL can shuttle between the cytoplasm and the mitochondrial outer membrane (MOM). Upstream signaling pathways can regulate the cytoplasmic-MOM equilibrium of BAX and thereby adjust the sensitivity of cells to apoptotic stimuli. Thus, we can view the MOM as the central locale of a dynamic life-death rheostat. BAX invariably forms extensive homo-oligomers after activation in membranes. However, recent studies, showing that activated BAX monomers determine the kinetics of MOM permeabilization (MOMP), perturb the lipid bilayer and form nanometer size pores, pose questions about the role of the oligomerization. Other lingering questions concern the molecular mechanisms of BAX redistribution between MOM and cytoplasm and the details of BAX/BAK-membrane assemblies. Future studies need to delineate how BCL-2 family proteins regulate MOMP, in concert with auxiliary MOM proteins, in a dynamic membrane environment. Technologies aimed at elucidating the structure and function of the full-length proteins in membranes are needed to illuminate some of these critical issues.

Three-dimensional structure of Bax-mediated pores in membrane bilayers.

B-cell lymphoma 2 (Bcl-2)-associated X protein (Bax) is a member of the Bcl-2 protein family having a pivotal role in triggering cell commitment to apoptosis. Bax is latent and monomeric in the cytosol but transforms into its lethal, mitochondria-embedded oligomeric form in response to cell stress, leading to the release of apoptogenic factors such as cytochrome C. Here, we dissected the structural correlates of Bax membrane insertion while oligomerization is halted. This strategy was enabled through the use of nanometer-scale phospholipid bilayer islands (nanodiscs) the size of which restricts the reconstituted system to single Bax-molecule activity. Using this minimal reconstituted system, we captured structural correlates that precede Bax homo-oligomerization elucidating previously inaccessible steps of the core molecular mechanism by which Bcl-2 family proteins regulate membrane permeabilization. We observe that, in the presence of BH3 interacting domain death agonist (Bid) BH3 peptide, Bax monomers induce the formation of ~3.5-nm diameter pores and significantly distort the phospholipid bilayer. These pores are compatible with promoting release of ions as well as proteinaceous components, suggesting that membrane-integrated Bax monomers in the presence of Bid BH3 peptides are key functional units for the activation of the cell demolition machinery.

Structure of Arp2/3 complex in its activated state and in actin filament branch junctions.

The seven-subunit Arp2/3 complex choreographs the formation of branched actin networks at the leading edge of migrating cells. When activated by Wiskott-Aldrich Syndrome protein (WASp), the Arp2/3 complex initiates actin filament branches from the sides of existing filaments. Electron cryomicroscopy and three-dimensional reconstruction of Acanthamoeba castellanii and Saccharomyces cerevisiae Arp2/3 complexes bound to the WASp carboxy-terminal domain reveal asymmetric, oblate ellipsoids. Image analysis of actin branches indicates that the complex binds the side of the mother filament, and Arp2 and Arp3 (for actin-related protein) are the first two subunits of the daughter filament. Comparison to the actin-free, WASp-activated complexes suggests that branch initiation involves large-scale structural rearrangements within Arp2/3.

Deciphering the design of the tropomyosin molecule.

The crystal structure at 2.0-A resolution of an 81-residue N-terminal fragment of muscle alpha-tropomyosin reveals a parallel two-stranded alpha-helical coiled-coil structure with a remarkable core. The high alanine content of the molecule is clustered into short regions where the local 2-fold symmetry is broken by a small (approximately 1.2-A) axial staggering of the helices. The joining of these regions with neighboring segments, where the helices are in axial register, gives rise to specific bends in the molecular axis. We observe such bends to be widely distributed in two-stranded alpha-helical coiled-coil proteins. This asymmetric design in a dimer of identical (or highly similar) sequences allows the tropomyosin molecule to adopt multiple bent conformations. The seven alanine clusters in the core of the complete molecule (which spans seven monomers of the actin helix) promote the semiflexible winding of the tropomyosin filament necessary for its regulatory role in muscle contraction.

An atomic model of actin filaments cross-linked by fimbrin and its implications for bundle assembly and function.

Actin bundles have profound effects on cellular shape, division, adhesion, motility, and signaling. Fimbrin belongs to a large family of actin-bundling proteins and is involved in the formation of tightly ordered cross-linked bundles in the brush border microvilli and in the stereocilia of inner ear hair cells. Polymorphism in these three-dimensional (3D) bundles has prevented the detailed structural characterization required for in-depth understanding of their morphogenesis and function. Here, we describe the structural characterization of two-dimensional arrays of actin cross-linked with human T-fimbrin. Structural information obtained by electron microscopy, x-ray crystallography, and homology modeling allowed us to build the first molecular model for the complete actin-fimbrin cross-link. The restriction of the arrays to two dimensions allowed us to deduce the spatial relationship between the components, the mode of fimbrin cross-linking, and the flexibility within the cross-link. The atomic model of the fimbrin cross-link, the cross-linking rules deduced from the arrays, and the hexagonal packing of actin bundles in situ were all combined to generate an atomic model for 3D actin-fimbrin bundles. Furthermore, the assembly of the actin-fimbrin arrays suggests coupling between actin polymerization, fimbrin binding, and crossbridge formation, presumably achieved by a feedback between conformational changes and changes in affinity.

Evidence for cleft closure in actomyosin upon ADP release.

Structural insights into the interaction of smooth muscle myosin with actin have been provided by computer-based fitting of crystal structures into three-dimensional reconstructions obtained by electron cryomicroscopy, and by mapping of structural and dynamic changes in the actomyosin complex. The actomyosin structures determined in the presence and absence of MgADP differ significantly from each other, and from all crystallographic structures of unbound myosin. Coupled to a complex movement ( approximately 34 A) of the light chain binding domain upon MgADP release, we observed a approximately 9 degrees rotation of the myosin motor domain relative to the actin filament, and a closure of the cleft that divides the actin binding region of the myosin head. Cleft closure is achieved by a movement of the upper 50 kDa region, while parts of the lower 50 kDa region are stabilized through strong interactions with actin. This model supports a mechanism in which binding of MgATP at the active site opens the cleft and disrupts the interface, thereby releasing myosin from actin.

Actomyosin: law and order in motility.

The crystal structures of smooth muscle and scallop striated muscle myosin have both been completed in the past 18 months. Structural studies of unconventional myosins, in particular the stunning discovery that myosin VI moves backwards on actin, are starting to have deep impact on the field and have induced new ways of thinking about actin-based motility. Sophisticated genetic, biochemical and biophysical studies were used to test and refine hypotheses of the molecular mechanism of motility that were developed in the past. Although all these studies confirmed some aspects of these hypotheses, they also raised many new unresolved questions. Much of the evidence points to the importance of the actin-myosin binding process and an associated disorder-to-order transition.

The crystal structure of modified bovine fibrinogen.

Here we report the crystal structure at approximately 4-A resolution of a selectively proteolyzed bovine fibrinogen. This key component in hemostasis is an elongated 340-kDa glycoprotein in the plasma that upon activation by thrombin self-assembles to form the fibrin clot. The crystals are unusual because they are made up of end-to-end bonded molecules that form flexible filaments. We have visualized the entire coiled-coil region of the molecule, which has a planar sigmoidal shape. The primary polymerization receptor pockets at the ends of the molecule face the same way throughout the end-to-end bonded filaments, and based on this conformation, we have developed an improved model of the two-stranded protofibril that is the basic building block in fibrin. Near the middle of the coiled-coil region, the plasmin-sensitive segment is a hinge about which the molecule adopts different conformations. This segment also includes the boundary between the three- and four-stranded portions of the coiled coil, indicating the location on the backbone that anchors the extended flexible Aalpha arm. We suggest that a flexible branch point in the molecule may help accommodate variability in the structure of the fibrin clot.

Quantitative fitting of atomic models into observed densities derived by electron microscopy.

A new methodology for fitting atomic models into density distributions is described. This approach is based on a global density correlation analysis that can be optionally supplemented by biochemical as well as biophysical data. The procedure is completely general and enables an objective evaluation of the resulting docking in the light of available biochemical and biophysical information as well as density correlation alone. In this paper we describe the implementation of the algorithm and its application to two biological systems. In both cases the procedure provided an interface model on the atomic level and located parts of the structure that were missing in the atomic model but present in the electron-microscopic construct. It also detected and quantified conformational changes in actomyosin complexes.

An atomic model of fimbrin binding to F-actin and its implications for filament crosslinking and regulation.

Using a new procedure that combines electron-density correlation with biochemical information, we have fitted the crystal structure of the N-terminal actin-binding domain of human T-fimbrin to helical reconstructions of fimbrin-decorated actin filaments. The map locates the N-terminal calcium-binding domain and identifies actin-binding site residues on the two calponin-homology domains of fimbrin. Based on this map, we propose a model of a fimbrin crosslink in an actin bundle and its regulation by calcium.

A milestone in ribosomal crystallography: the construction of preliminary electron density maps at intermediate resolution.

Preliminary electron density maps of the large and the small ribosomal particles from halophilic and thermophilic sources, phased by the isomorphous replacement method, have been constructed at intermediate resolution. These maps contain features comparable in size with what is expected for the corresponding particles, and their packing arrangements are in accord with the schemes obtained by ab-initio procedures as well as with the motifs observed in thin sections of the crystals by electron microscopy. To phase higher resolution data, procedures are being developed for derivatization by specific labeling of the ribosomal particles at selected locations with rather small and dense clusters. Potential binding sites are being inserted either by site directed mutagenesis or by chemical modifications to facilitate cluster binding on the surface of the halophilic large and the thermophilic small ribosomal particles, which yield the crystals diffracting to highest resolution (2.9 and 7.3 A (1 A = 0.1 nm), respectively). For this purpose, the surface of these ribosomal particles is being characterized and procedures are being developed for quantitative detachment of selected ribosomal proteins and for their incorporation into core particles. The genes of these proteins are being cloned, sequenced, mutated to introduce reactive side groups, mainly cysteines, and overexpressed. In parallel, two in situ small and stable complexes were isolated from the halophilic ribosome. Procedures for their crystal production in large quantities are currently being developed. Models, reconstructed at low resolution from crystalline arrays of ribosomes and their large subunits, are being used for initial low-resolution phasing of the X-ray amplitudes. The interpretation of these models stimulated the design and the crystallization of complexes mimicking defined functional states of a higher quality than those obtained for isolated ribosomes. These models also inspired modelling experiments according to results of functional studies, performed elsewhere, focusing on the progression of nascent proteins.

The suitability of a monofunctional reagent of an undecagold cluster for phasing data collected from the large ribosomal subunits from Bacillus stearothermophilus.

An electron density map of the large ribosomal subunit from Bacillus stearothermophilus was obtained at 26 A resolution by single isomorphous replacement (SIR) from a derivative formed by specific quantitative labeling with a dense undecagold cluster. For derivatization, a monofunctional reagent of this cluster was bound to a sulfhydryl group of a purified ribosomal protein, which was in turn reconstituted with core particles of a mutant lacking this protein. The native, mutated, and derivatized 50S ribosomal subunits crystallize under the same conditions in the same space group. Under favorable conditions, crystals of the derivatized subunit proved to be isomorphous with the native ones, whereas the crystals of the mutant may have somewhat different packing. After resolving the SIR phase ambiguity by solvent flattening, the electron density shows a packing that is consistent with the noncrystallographic symmetry found by Patterson searches as well as with the motif observed in electron micrographs of thin sections of the crystals. These studies established that phase information can be obtained from heavy metal clusters, even when the crystals under investigation are unstable and weakly diffracting. These results encouraged further effort at the construction of specifically derivatized crystals from other ribosomal particles that diffract to higher resolution.

Characterization and preliminary crystallographic studies on large ribosomal subunits from Thermus thermophilus.

Diffracting crystals, suitable for X-ray crystallographic analysis, have been obtained from large (50 S) ribosomal subunits from Thermus thermophilus. These crystals, with P4(1)2(1)2 symmetry and a unit cell of 495 A x 495 A x 196 A, reach typically a size of 0.15 mm x 0.25 mm x 0.35 mm. Using synchrotron radiation at cryo-temperature, these crystals diffract X-rays to better than 9 A resolution, and do not show any measurable decay after a few days of irradiation. They complete a series of crystals, grown by us, from ribosomal particles of the same source, including a 30 S subunits, 70 S ribosomes and complexes of the latter with: (1) an oligomer of 35 uridine residues and (2) the same oligonucleotide together with approximately two Phe-tRNA(Phe) molecules. Crystallographic analysis of the various members of this series should provide information for investigating the conformational changes that take place upon the association of ribosomes from their subunits as well as upon binding of non-ribosomal components that participate in protein biosynthesis.

Crystals of complexes mimicking protein biosynthesis are suitable for crystallographic studies.

A complex of 70S ribosomes from Thermus thermophilus together with an average of 1.5-1.8 equivalents of PhetRNA(Phe) and a short mRNA chain, composed of 35 +/- 5 uridines, was crystallized under the conditions used for the growth of crystals of isolated ribosomes from the same source. Considering the reproducibility of their growth, their internal order and their shape, the crystals of the complex are superior to those of isolated ribosomes. In accord with previous three-dimensional reconstruction and modeling experiments, we conclude that the complex is less flexible and that an average population of complexes is more homogeneous than that of isolated 70S ribosomes. The crystals of the complex diffract to higher than 15 A resolution and can be irradiated with synchrotron X-ray beam at cryo-temperatures for days without noticeable decay. Since the crystals of the complex are apparently isomorphous with these of the isolated 70S ribosomes (P4(1)2(1)2; a = b = 526; c = 315 A), they should provide tool for phasing as well as for locating the mRNA and tRNA binding sites.