Preparative protein concentration from biofluids by epitachophoresis.

With increasing demands on protein analyses in complex biological matrices, the insistence on developing new sample preparation techniques is rising. Recently, we introduced a new displacement electrophoresis technique (epitachophoresis) and instrumentation for preparative concentration and cleaning of DNA samples. This work describes the possibility of applying this device to protein samples. We have developed a method for the epitachophoretic concentration of proteins in a cationic mode and tested it by concentrating and collecting the protein zones from complex biological matrices (urine and growth medium). Under optimized conditions, we have obtained recoveries up to 99%. Furthermore, the applicability of the developed method was proven by concentrating and collecting the cytochrome c zone from a HeLa cell line growth medium, where the protein cytochrome c was released during cell apoptosis.

Epitachophoresis is a novel versatile total nucleic acid extraction method.

Epitachophoresis is a novel next generation extraction system capable of isolating DNA and RNA simultaneously from clinically relevant samples. Here we build on the versatility of Epitachophoresis by extracting diverse nucleic acids ranging in lengths (20 nt-290 Kbp). The quality of extracted miRNA, mRNA and gDNA was assessed by downstream Next-Generation Sequencing.

3D printed device for epitachophoresis.

Polyacrylamide or agarose gels are the most frequently used sieving and stabilizing media in slab gel electrophoresis. Recently, we have introduced a new electrophoretic technique for concentration/separation of milliliter sample volumes. In this technique, the gel is used primarily as an anticonvection media eliminating liquid flow during the electromigration. While serving well for the liquid stabilization, the gels can undergo deformation when exposed to a discontinuous electrolyte buffer system used in epitachophoresis. In this work, we have explored 3D printing to form rigid stabilizing manifolds to minimize liquid flow during the epitachophoresis run. The whole device was printed using the stereolithography technique from a low water-absorbing resin. The stabilizing manifold, serving as the gel substitute, was printed as a replaceable composite structure preventing electrolyte mixing during the separation. Different geometries of the 3D printed stabilizing manifolds were tested for use in concentrating ionic sample components without spatial separation. The presented device can focus analytes from 3 or 4 mL of the sample to 150 µL or less, depending on the collection cup size. With the 150 µL collection cup, this represents the enrichment factor from 20 to 27. The time of concentration was from 15 to 25 min, depending on stabilization media and power used.

Macrofluidic Device for Preparative Concentration Based on Epitachophoresis.

We have developed a new separation device to concentrate and collect ions from several milliliter sample volumes to microliter fractions. Unlike most conventional platforms, this device has circular architecture. The electrophoretic migration operates from the outer perimeter toward the center. Separations can be performed both in continuous (zone electrophoresis) and discontinuous (moving boundary) electrolyte systems. We use a discontinuous electrolyte system comprising a leading and a terminating electrolyte to concentrate samples containing small organic anions and DNA fragment. The agarose gel stabilizes the boundary between the leading and terminating electrolytes. The milliliter volume sample is mixed with the terminating electrolyte and migrates through the gel toward the center. The concentrated total sample is collected in microliter fraction at the center. The potential for preparative concentration of DNA is demonstrated using a DNA ladder. Because zone migration accelerates as it moves toward the center, we named this method Epitachophoresis from the Greek word "επιταχυνω (epitachýnο)", meaning "acceleration". To the best of our knowledge, this unique circular architecture has not been previously described.

Preparative concentration of nucleic acids fragments by capillary isotachophoretic analyzer.

Sample preparation plays an important role in the DNA analysis workflow. Real samples often include a complex matrix, such as blood and other bodily fluids, or exogenous impurities, e.g., from the scene of crime. Most of the common nucleic acids isolation techniques are based on extractions; however, isotachophoretic focusing has recently attracted some interest for its simplicity and potential for very high enrichment factors and ease of automation. Here, we report on the use of a commercial isotachophoretic instrument for optimization of DNA focusing and preparative fraction collection. In order to achieve a high recovery and enrichment, experimental factors including electric current, sample amount and matrix were investigated experimentally as well as by computer simulation. The sample of a DNA ladder was injected in 30 µl volume and after ITP focusing the DNA zone was recovered using an on-column micropreparative collection valve. The DNA content in the collected sample was verified by fluorescence spectrometry and chip capillary electrophoresis with fluorescence detection.

Recent progress in nucleic acids isotachophoresis.

Progress achieved between 2014-2017 in the extraction and sample preparation of nucleic acid by isotachophoresis is reviewed in this paper. The isolation and purification of nucleic acids is very often compromised by a complex matrix such as blood and other bodily fluids, samples from the scene of crime, fossil samples, etc. While most of the common nucleic acids isolation techniques are based on extraction with inherent limitations with regard to quantitative results, isotachophoretic focusing is a quantitative process with a theoretically unlimited concentration factor. Since isotachophoresis belongs to less traditional approaches of nucleic acids purification, we present not only the latest developments in the application of isotachophoresis for the nucleic acids concentration but also a brief description of the principles of this method.

Determination of ζ-potential, charge, and number of organic ligands on the surface of water soluble quantum dots by capillary electrophoresis.

The number of charges and/or organic ligands covalently attached to the surface of CdTe quantum dot nanoparticles has been determined from their electrophoretic mobilities measured in capillaries filled with free electrolyte buffers. Three sizes of water soluble CdTe quantum dots with 3-mercaptopropionic and thioglycolic acids as surface ligands were prepared. Their electrophoretic mobilities in different pH and ionic strength values of separation buffers were measured by capillary electrophoresis with laser induced fluorescence detection. The ζ-potentials determined from electrophoretic mobilities using analytical solution of Henry function proposed by Ohshima were in the range from -30 to -100 mV. Charges of QDs were calculated from ζ-potentials. As a result, numbers of organic ligands bonded to QDs surface were determined to be 13, 14, and 15 for the sizes of 3.1, 3.5, and 3.9 nm, respectively. The dissociation constants of organic ligands bonded on QDs surfaces estimated from the dependence of QDs charge on pH of the separation buffer were 7.8 and 7.9 for 3-mercaptopropionic acid and 6.9 for thioglycolic acid.

Analysis of quantum dots and their conjugates by capillary electrophoresis with detection of laser-induced luminescence.

In many bioanalytical applications, important molecules such as DNA, proteins, and antibodies are routinely conjugated with fluorescent tags to reach an extraordinary sensitivity of analyses. Semiconductor nanoparticles, quantum dots, have already proved to be suitable components of highly luminescent tags, probes, and sensors with a broad applicability in analytical chemistry. Quantum dots provide high extinction coefficients together with a wide range of excitation wavelengths, size- and composition-tunable emissions, narrow and symmetric emission spectra, good quantum yields, relatively long size-dependent luminescence lifetime, and practically no photobleaching. Most of these properties are superior when compared with conventional organic fluorescent dyes. In this chapter, optimized procedures for the preparation of water-dispersed cadmium telluride (CdTe) quantum dots, conjugating reactions with antibodies, DNA, and macrocycles as well as their analyses by capillary electrophoresis are described. The potential of capillary electrophoresis for fast analyses of nanoparticles, their conjugates with antibodies, and immunocomplexes with targeted antigens is demonstrated on examples.

Capillary electrophoresis immunoassays with conjugated quantum dots.

Water-soluble CdTe quantum dots (QDs) and their conjugates with antibodies and antigenes were prepared by optimized procedures for applications in CE immunoassays. The QD size of 3.5 nm, excitation spectrum in the range of 300-500 nm, the maximum wavelength of the emission spectrum at 610 nm, quantum yield of 0.25 and luminescence lifetimes in the range of 3.6-43 ns were determined. The 0.1 M solution of TRIS/TAPS (pH 8.3) was found to be the optimum buffer for the separation of the antiovalbumin-ovalbumin immunocomplex from the free conjugates of QDs.