Nafion-212 Membrane Solvated by Ethylene and Propylene Carbonates as Electrolyte for Lithium Metal Batteries.

The use of cation-exchange membranes as electrolytes for lithium metal batteries can prevent the formation of lithium dendrites during extended cycling and guarantee safe battery operation. In our study, the Nafion-212 membrane in lithium form solvated by a mixture of ethylene carbonate and propylene carbonate (EC-PC) was used as an electrolyte in a lithium metal battery with the LiFePO4 cathode. The Nafion-212-EC-PC electrolyte is electrochemically stable up to 6 V, indicating its suitability for high-energy density batteries. It has an ionic conductivity of 1.9 × 10-4 S/cm at 25 °C and a high lithium transference number. The symmetric Li|Nafion-212-EC-PC|Li cell shows a very low overvoltage of ~0.3 V at a current density of ±0.1 mA/cm2. At 25 °C, the LiFePO4|Nafion-212-EC-PC|Li battery exhibits a capacity of 141, 136, 125, and 100 mAh/g at 0.1, 0.2, 0.5, and 1C rates, respectively. It maintains a capacity of 120 mAh/g at 0 °C and 0.1C with stable performance for 50 charge/discharge cycles. The mechanism of conductivity and capacity retention at low temperatures is discussed.

Approaches to the Modification of Perfluorosulfonic Acid Membranes.

Polymer ion-exchange membranes are featured in a variety of modern technologies including separation, concentration and purification of gases and liquids, chemical and electrochemical synthesis, and hydrogen power generation. In addition to transport properties, the strength, elasticity, and chemical stability of such materials are important characteristics for practical applications. Perfluorosulfonic acid (PFSA) membranes are characterized by an optimal combination of these properties. Today, one of the most well-known practical applications of PFSA membranes is the development of fuel cells. Some disadvantages of PFSA membranes, such as low conductivity at low humidity and high temperature limit their application. The approaches to optimization of properties are modification of commercial PFSA membranes and polymers by incorporation of different additive or pretreatment. This review summarizes the approaches to their modification, which will allow the creation of materials with a different set of functional properties, differing in ion transport (first of all proton conductivity) and selectivity, based on commercially available samples. These approaches include the use of different treatment techniques as well as the creation of hybrid materials containing dopant nanoparticles. Modification of the intrapore space of the membrane was shown to be a way of targeting the key functional properties of the membranes.

On the Properties of Nafion Membranes Recast from Dispersion in N-Methyl-2-Pyrrolidone.

Perfluorosulfonic acid Nafion membranes are widely used as an electrolyte in electrolysis processes and in fuel cells. Changing the preparation and pretreatment conditions of Nafion membranes allows for the optimization of their properties. In this work, a Nafion-NMP membrane with a higher conductivity than the commercial Nafion® 212 membrane (11.5 and 8.7 mS∙cm-1 in contact with water at t = 30 °C) and a comparable hydrogen permeability was obtained by casting from a Nafion dispersion in N-methyl-2-pyrrolidone. Since the ion-exchange capacity and the water uptake of these membranes are similar, it can be assumed that the increase in conductivity is the result of optimizing the Nafion-NMP microstructure by improving the connectivity of the pores and channels system. This leads to a 27% increase in the capacity of the membrane electrode assembly with the Nafion-NMP membrane compared to the Nafion® 212 membrane. Thus, the method of obtaining a Nafion membrane has a great influence on its properties and performance of fuel cells based on them.

Membranes Based on Polyvinylidene Fluoride and Radiation-Grafted Sulfonated Polystyrene and Their Performance in Proton-Exchange Membrane Fuel Cells.

Proton-exchange membranes based on gamma-irradiated films of PVDF and radiation-grafted sulfonated polystyrene with an ion-exchange capacity of 1.8 meq/g and crosslinking degrees of 0 and 3% were synthesized. A solvent-free, environmentally friendly method of styrene grafting from its aqueous emulsion, with a styrene content of only 5 vol.% was used. Energy dispersive X-ray mapping analysis showed that the grafted sulfonated polystyrene is uniformly distributed throughout the membrane thickness. The obtained materials had a proton conductivity up to 132 mS/cm at 80 °C and a hydrogen permeability of up to 5.2 cm2/s at 30 °C, which significantly exceeded similar values for Nafion®-212 membranes. The resulting membranes exhibited a H2/O2 fuel cell peak power density of up to 0.4 W/cm2 at 65 °C. Accelerated stability tests showed that adding a crosslinking agent could significantly increase the stability of the membranes in the fuel cells. The thermal properties and crystallinity of the membranes were investigated through differential scanning calorimetry and X-ray powder diffraction methods. The conductivity, water uptake, and mechanical properties of the membranes (stress-strain curves) were also characterized.

Correlation between Nafion Morphology in Various Dispersion Liquids and Properties of the Cast Membranes.

Nafion is a perfluorosulfonic acid polymer that is most commonly used in proton-exchange membrane fuel cells. The processes of pretreatment and formation of such membranes strongly affect their properties. In this work, dispersions of Nafion in various ionic forms and dispersing liquids (ethylene glycol, N,N-dimethylformamide, N-methyl-2-pyrrolidone and isopropyl alcohol-water mixtures in different ratios) were obtained and studied. Membranes fabricated by casting of the various dispersions were also studied. The effect of the nature of the dispersing liquid and the counterion on the properties of Nafion dispersions, the morphology of the polymer in the dispersions and the characteristics of the membranes obtained from them has been shown. Based on the overall results, it can be concluded that the use of perfluorosulfonic acid dispersions in aprotic polar solvents is advisable for obtaining membranes by the casting procedure. This is because it provides optimal polymer morphology in the dispersion, which leads to the formation of films with good selectivity, mechanical and transport properties. The performed investigations show the relationship between the composition of dispersions, the morphology of the polymer and the properties of the membranes formed from them by the casting procedure.

Polymer Electrolytes for LIBs Based on Perfluorinated Sulfocationic Nepem-117 Membrane and Aprotic Solvents.

Polymer electrolytes have been obtained by using Nepem-117 membranes in a Li+ form intercalated by polar aprotic solvents, such as dimethylformamide, dimethyl sulfoxide (DMSO), and dimethylacetamide (DMA), and solvent mixtures, such as ethylene carbonate-propylene carbonate (EC-PC), EC-DMA, EC-PC-DMA, and EC-PC-DMA-tetrahydrofuran. The obtained electrolytes have been characterized by IR impedance and 7Li pulsed field gradient NMR spectroscopy. Ion mobility was observed to increase with higher degrees of solvation of the membranes. A method is demonstrated to determine the solvent uptake corresponding to the percolation threshold. With comparable solvent uptake, materials containing a solvent with a higher permittivity and a lower viscosity have higher values of ionic conductivity. The membranes containing the three-component mixture of EC-PC-DMA show the highest ionic conductivity values (8.1 and 2.1 mS/cm at 25 and -20 °C, respectively). Such values exceed the conductivity of electrolytes on the basis of the Nafion membranes solvated with aprotic solvents.