ABSTRACT
A recently discovered new family of 3D halide perovskites with the general formula (A)1-x(en)x(Pb)1-0.7x(X)3-0.4x (A = MA, FA; X = Br, I; MA = methylammonium, FA = formamidinium, en = ethylenediammonium) is referred to as "hollow" perovskites owing to extensive Pb and X vacancies created on incorporation of en cations in the 3D network. The "hollow" motif allows fine tuning of optical, electronic, and transport properties and bestowing good environmental stability proportional to en loading. To shed light on the origin of the apparent stability of these materials, we performed detailed thermochemical studies, using room temperature solution calorimetry combined with density functional theory simulations on three different families of "hollow" perovskites namely en/FAPbI3, en/MAPbI3, and en/FAPbBr3. We found that the bromide perovskites are more energetically stable compared to iodide perovskites in the FA-based hollow compounds, as shown by the measured enthalpies of formation and the calculated formation energies. The least stable FAPbI3 gains stability on incorporation of the en cation, whereas FAPbBr3 becomes less stable with en loading. This behavior is attributed to the difference in the 3D cage size in the bromide and iodide perovskites. Configurational entropy, which arises from randomly distributed cation and anion vacancies, plays a significant role in stabilizing these "hollow" perovskite structures despite small differences in their formation enthalpies. With the increased vacancy defect population, we have also examined halide ion migration in the FA-based "hollow" perovskites and found that the migration energy barriers become smaller with the increasing en content.
ABSTRACT
We apply high-temperature oxide melt solution calorimetry to assess the thermodynamic properties of the material Li1+xAlxTi2-x(PO4)3, which has been broadly recognized as one of the best Li-ion-conducting solid electrolytes of the NASICON family. The experimental results reveal large exothermic enthalpies of formation from binary oxides (ΔHf,ox°) and elements (ΔHf,el°) for all compositions in the range 0 ≤ x ≤ 0.5. This indicates substantial stability of Li1+xAlxTi2-x(PO4)3, driven by thermodynamics and not just kinetics, during long-term battery operation. The stability increases with increasing Al3+ content. Furthermore, the dependence of the formation enthalpy on the Al3+ content shows a change in behavior at x = 0.3, a composition near which the Li+ conductivity reaches the highest values. The strong correlation among thermodynamic stability, ionic transport, and clustering is a general phenomenon in ionic conductors that is independent of the crystal structure as well as the type of charge carrier. Therefore, the thermodynamic results can serve as guidelines for the selection of compositions with potentially the highest Li+ conductivity among different NASICON-type series with variable dopant contents.
ABSTRACT
The stability of functional materials in water-containing environments is critical for their industrial applications. A wide variety of metal-organic frameworks (MOFs) synthesized in the past decade have strikingly different apparent stabilities in contact with liquid or gaseous H2O, ranging from rapid hydrolysis to persistence over days to months. Here, we show using newly determined thermochemical data obtained by high-temperature drop combustion calorimetry that these differences are thermodynamically driven rather than primarily kinetically controlled. The formation reaction of a MOF from metal oxide (MO) and a linker generally liberates water by the reaction MO + linker = MOF + H2O. Newly measured enthalpies of formation of Mg-MOF-74(s) + H2O(l) and Ni-MOF-74(s) + H2O(l) from their crystalline dense components, namely, the divalent MO (MgO or NiO) and 2,5-dihydroxyterephthalic acid, are 303.9 ± 17.2 kJ/mol of Mg for Mg-MOF-74 and 264.4 ± 19.4 kJ/mol of Ni for Ni-MOF-74. These strongly endothermic enthalpies of formation indicate that the reverse reaction, namely, the hydrolysis of these MOFs, is highly exothermic, strongly suggesting that this large thermodynamic driving force for hydrolysis is the reason why the MOF-74 family cannot be synthesized via hydrothermal routes and why these MOFs decompose on contact with moist air or water even at room temperature. In contrast, other MOFs studied previously, namely, zeolitic imidazolate frameworks (ZIF-zni, ZIF-1, ZIF-4, Zn(CF3Im)2, and ZIF-8), show enthalpies of formation in the range 20-40 kJ per mole of metal atom. These modest endothermic enthalpies of formation can be partially compensated by positive entropy terms arising from water release, and these materials do not react appreciably with H2O under ambient conditions. Thus, these differences in reactivity with water are thermodynamically controlled and energetics of formation, either measured or predicted, can be used to assess the extent of water sensitivity for different possible MOFs.
ABSTRACT
This article describes a novel method for depositing a dense, high quality palladium thin film via a one-step aqueous combustion process which can be easily scaled up. Film deposition of Pd from aqueous solutions by conventional chemical or electrochemical methods is inhibited by hydrogen embrittlement, thus resulting in a brittle palladium film. The method outlined in this work allows a direct aqueous solution deposition of a mirror-bright, durable Pd film on substrates including glass and glassy carbon. This simple procedure has many advantages including a very high deposition rate (>10 cm2 min-1) and a relatively low deposition temperature (250 °C), which makes it suitable for large-scale industrial applications. Although preparation of various high-quality oxide films has been successfully accomplished via solution combustion synthesis (SCS) before, this article presents the first report on direct SCS production of a metallic film. The mechanism of Pd film formation is discussed with the identification of a complex formed between palladium nitrate and glycine at low temperature. The catalytic properties and stability of films are successfully tested in alcohol electrooxidation and electrochemical oxygen reduction reaction. It was observed that combustion deposited Pd film on a glassy carbon electrode showed excellent catalytic activity in ethanol oxidation without using any binder or additive. We also report for the first time the concept of a reusable "catalytic flask" as illustrated by the Suzuki-Miyaura cross-coupling reaction. The Pd film uniformly covers the inner walls of the flask and eliminates the catalyst separation step. We believe the innovative concept of a reusable catalytic flask is very promising and has the required features to become a commercial product in the future.
