Effects of ractopamine hydrochloride and zilpaterol hydrochloride supplementation on longissimus muscle shear force and sensory attributes of calf-fed Holstein steers.

The effect of ractopamine hydrochloride (RH) and zilpaterol hydrochloride (ZH) on slice shear force (SSF) and sensory characteristics of beef from calf-fed Holstein steers was evaluated. All steers were implanted with a progesterone (100 mg) plus estradiol benzoate (10 mg) implant followed by a terminal trenbolone acetate (200 mg) plus estradiol (40 mg) implant. Steers were blocked by weight into pens (n = 32) randomly assigned to 1 of 4 treatments: control, RH fed at 300 mg·steer(-1)·d(-1) (RH 300) or RH fed at 400 mg·steer(-1)·d(-1)(RH 400) for the final 31 d of finishing, or ZH fed at 6.8 g/t for 21 d with a 5-d withdrawal before harvest. Fourteen carcasses were randomly selected from each pen, and two LM samples (1 per side) were excised and aged either 14 or 21 d before SSF testing. For trained panel evaluation, two steaks were collected from each of 60 low Choice strip loins (20 each from control, RH 300, and ZH treatments) and aged either 14 or 21 d. Steers fed RH and ZH produced steaks with SSF values that were 9% to 25% higher than controls. No difference in SSF was detected between the two levels of RH (P > 0.05). Compared to controls, the probability of steaks aged 14 d failing to meet SSF requirements to be certified tender (SSF < 20 kg) was increased 0.15, 0.17, and 0.26 in steers fed RH 300, RH 400, and ZH, respectively. Compared to controls, the probability of steaks aged 21 d having SSF values >20 kg was increased 0.03, 0.08, and 0.16 in steers fed RH 300, RH 400, and ZH, respectively. Steaks from Select carcasses of steers fed ZH aged 21 d postmortem had double the probability (0.39 vs. 0.17) of having SSF values >20 kg compared to steaks from steers fed either level of RH (P < 0.05). This difference tended to be identical in steaks from Select carcasses 14 d postmortem (0.50 vs. 0.33; P = 0.11); however, no difference was found in low Choice samples at 14 or 21 d postmortem. Trained panelists rated steaks aged 14 d from steers fed ZH lower for overall tenderness and flavor compared to controls (P < 0.05); however, no difference was found between controls and those fed RH 300. Steaks from steers fed ZH aged 21 d were rated lower for overall tenderness and juiciness compared to controls and those from steers fed RH 300 (P < 0.05). This study suggests RH and ZH negatively impact sensory attributes of beef from calf-fed Holstein steers.

Effects of ractopamine hydrochloride and zilpaterol hydrochloride supplementation on carcass cutability of calf-fed Holstein steers.

Effects of ractopamine hydrochloride (RH) and zilpaterol hydrochloride (ZH) on saleable yield of carcass sides from calf-fed Holstein steers were evaluated using steers implanted with a progesterone (100 mg) plus estradiol benzoate (10 mg) implant followed by a terminal trenbolone acetate (200 mg) plus estradiol (40 mg) implant. Steers were blocked by weight into pens (n = 32) randomly assigned to one of four treatments: control, RH fed at 300 mg•steer(-1)/d(-1) (RH 300) or RH fed at 400 mg•steer(-1)/d(-1) (RH 400) the final 31 d of finishing, and ZH fed at 60 to 90 mg•steer(-1)/d(-1) (7.56 g/ton on a 100% DM basis) for 21 d with a 5 d withdrawal before harvest. Eight to nine carcass sides were randomly selected from each pen; carcass sides with excessive hide pulls, fat pulls or bruises were avoided. Cutout data were collected within a commercial facility using plant personnel to fabricate sides at a rate of one every 3 to 4 min into items typically merchandised by the facility. All lean, fat and bone were weighed and summed back to total chilled side weight with a sensitivity of ± 2% to be included in the data set. Compared to controls, ß-agonists increased saleable yield of whole-muscle cuts by 0.61%, 0.86% and 1.95% for RH 300, RH 400 and ZH, respectively (P < 0.05). Percent fat was less in carcasses from the ZH treatment compared to controls (P < 0.05); however, this difference was not observed between RH treatments and controls (P > 0.05). Percent bone was less in the ZH treatment due to increased muscle (P < 0.05). The percent of chilled side weight comprised of trimmings was unchanged between treatments, but on a 100% lean basis, RH 400 and ZH increased trim yields (P < 0.05). Analysis of saleable yield by primal showed a fundamental shift in growth and development. Beta-agonists caused a shift in proportion of saleable yield within individual primals, with a greater portion produced from the hindquarter relative to the forequarter, specifically in those muscles of the round (P < 0.05). Beta-agonists increased saleable yield, but these effects were not constant between all major primals. The cutout value gained by packers as a result of ß-agonist use may be influenced more by reduced fatness and increased absolute weight if musculature is primarily increased in the lower priced cuts of the carcass.

Video image analysis as a potential grading system for Uruguayan beef carcasses.

A study was conducted in 2 phases to evaluate the effectiveness of 1) the VIAscan Beef Carcass System (BCSys; hot carcass system) and the CVS BeefCam (chilled carcass system), used independently or in combination, to predict Uruguayan beef carcass fabrication yields; and 2) the CVS BeefCam to segregate Uruguayan beef carcasses into groups that differ in the Warner-Bratzler shear force (WBSF) values of their LM steaks. The results from the meat yield phase of the present study indicated that the prediction of saleable meat yield percentages from Uruguayan beef carcasses by use of the BCSys or CVS BeefCam is similar to, or slightly better than, the use of USDA yield grade calculated to the nearest 0.1 and was much more effective than prediction based on Uruguay National Institute of Meat (INAC) grades. A further improvement in fabrication yield prediction could be obtained by use of a dual-component video image analysis (VIA) system. Whichever method of VIA prediction of fabrication yield is used, a single predicted value of fabrication yield for every carcass removes an impediment to the implementation of a value-based pricing system. Additionally, a VIA method of predicting carcass yield has the advantage over the current INAC classification system in that estimates would be produced by an instrument rather than by packing plant personnel, which would appeal to cattle producers. Results from the tenderness phase of the study indicated that the CVS BeefCam output variable for marbling was not (P > 0.05) able to segregate steer and heifer carcasses into groups that differed in WBSF values. In addition, the results of segregating steer and heifer carcasses according to muscle color output variables indicate that muscle maturity and skeletal maturity were useful for segregating carcasses according to differences in WBSF values of their steaks (P > 0.05). Use of VIA to predict beef carcass fabrication yields could improve accuracy and reduce subjectivity in comparison with use of current INAC grades. Use of VIA to sort carcasses according to muscle color would allow for the marketing of more consistent beef products with respect to tenderness. This would help facilitate the initiation of a value-based marketing system for the Uruguayan beef industry.

Using reflectance spectroscopy to predict beef tenderness.

A study was conducted to determine if reflectance measurements made in the near-infrared region of the spectrum were additive to reflectance measurements made in the visible region of the spectrum for predicting Warner-Bratzler shear force (WBSF) values. Eighty seven strip loins were collected following fabrication over 3d at a commercial beef processing facility from heifer carcasses with Slight or Traces marbling scores. Spectroscopic measurements were made at approximately 50h postmortem using a Hunter-Lab UltraScan. Subsequently, all strip loins were aged for 14d, cooked to an internal temperature of 70°C, and sheared to obtain WBSF values. Reflectance measurements obtained in the near-infrared region of the spectrum were correlated with WBSF values, however, these measurements were not additive to the predictive ability of reflectance measurements (R(2) values did not differ) made in the visible portion of the spectrum when the use of broad-band wavelength filters were simulated. It was therefore determined, that both the visible and near-infrared spectra measure reflectance and that both methods are acceptable methods of tenderness prediction.

Molecular characterization of Escherichia coli O157:H7 hide contamination routes: feedlot to harvest.

This study was conducted to identify the origin of Escherichia coli O157:H7 contamination on steer hides at the time of harvest. Samples were collected from the feedlot, transport trailers, and packing plant holding pens and from the colons and hides of feedlot steers. A total of 50 hide samples were positive for E. coli O157:H7 in two geographical locations: the Midwest (25 positive hides) and Southwest (25 positive hides). Hide samples were screened, and the presence of E. coli O157: H7 was confirmed. E. coli O157:H7 isolates were fingerprinted by pulsed-field gel electrophoresis and subjected to multiplex PCR procedures for amplification of E. coli O157:H7 genes stx1, stx2, eaeA, fliC, rfbEO157, and hlyA. Feedlot water trough, pen floor, feed bunk, loading chute, truck trailer side wall and floor, packing plant holding pen floor and side rail, and packing plant cattle drinking water samples were positive for E. coli O157:H7. Pulsed-field gel electrophoresis banding patterns were analyzed after classifying isolates according to the marker genes present and according to packing plant. In this study, hide samples positive for E. coli O157:H7 were traced to other E. coli O157:H7-positive hide, colon, feedlot pen floor fecal, packing plant holding pen drinking water, and transport trailer side wall samples. Links were found between packing plant side rails, feedlot loading chutes, and feedlot pens and between truck trailer, different feedlots, and colons of multiple cattle. This study is the first in which genotypic matches have been made between E. coli O157:H7 isolates obtained from transport trailer side walls and those from cattle hide samples within the packing plant.

Real-time augmentation of USDA yield grade application to beef carcasses using video image analysis.

In two phases, this study assessed the ability of two video image analysis (VIA) instruments, VIASCAN and Computer Vision System (CVS), to augment assignment of yield grades (YG) to beef carcasses to 0.1 of a YG at commercial packing plant speeds and to test cutout prediction accuracy of a YG augmentation system that used a prototype augmentation touchpanel grading display (designed to operate commercially in real-time). In Phase I, beef carcasses (n = 505) were circulated twice at commercial chain speeds (340 carcasses per hour) by 12 on-line USDA graders. During the first pass, on-line graders assigned a whole-number YG and a quality grade (QG) to carcasses as they would normally. During the second pass, on-line graders assigned only adjusted preliminary yield grades (APYG) and QG to carcasses, whereas the two VIA instruments measured the longissimus muscle area (LMA) of each carcass. Kidney, pelvic, and heart fat (KPH) was removed and weighed to allow computation of actual KPH percentage. Those traits were compared to the expert YG and expert YG factors. On-line USDA graders' APYG were closely related (r = 0.83) to expert APYG. Instrument-measured LMA were closely related (r = 0.88 and 0.94; mean absolute error = 0.3 and 0.2 YG units, for VIASCAN and CVS, respectively) to expert LMA. When YG were augmented using instrument-measured LMA and computed either including or neglecting actual KPH percentage, YG were closely related (r = 0.93 and 0.92, mean absolute error = 0.32 and 0.40 YG units, respectively, using VIASCAN-measured LMA; r = 0.95 and 0.94, mean absolute error = 0.24 and 0.34 YG units, respectively, using CVS-measured LMA) to expert YG. In Phase II, augmented YG were assigned (0.1 of a YG) to beef carcasses (n = 290) at commercial chain speeds using VIASCAN and CVS to determine LMA, whereas APYG and QG were determined by online graders via a touch-panel display. On-line grader YG (whole-number), expert grader YG (to the nearest 0.1 of a YG), and VIASCAN- and CVS-augmented YG (to the nearest 0.1 of a YG) accounted for 55, 71, 60, and 63% of the variation in fabricated yields of closely trimmed subprimals, respectively, suggesting that VIA systems can operate at current plant speeds and effectively augment official USDA application of YG to beef carcasses.

Accuracy and repeatability of beef carcass longissimus muscle area measurements.

This study was conducted to determine the accuracy and repeatability of beef carcass longissimus muscle area (LMA) measurements obtained by three different methods. Longissimus muscle area for beef carcass sides (n = 100) randomly selected in a commercial packing plant was determined: 1) independently by three USDA grading supervisor "experts" using the grid method to obtain triplicate measurements of the same longissimus muscle (LM); 2) by three different Colorado State University personnel tracing the LMA on acetate paper and subsequently measuring the area via a polar planimeter three different times (total of 3 x 3 = 9 observations/LM); and 3) by use of two identical video image analysis (VIA) instruments making triplicate measurements for each LM using three different procedures. Video image analysis Procedure 1 required that LMA be measured by placing the camera head unit over the LM and collecting three sequential images without moving the camera head unit while carcasses were in a stationary position; Procedure 2 required measurement of LMA by placing the camera head unit over the LM and collecting three images, but removing and repositioning the camera head unit between collection of each image while carcasses were in a stationary position; and Procedure 3 required that LMA be measured by placing the camera head unit over the LM and obtaining an image while carcasses were in continuous motion (chain speed of 360 carcasses/ h) during three different circulations past the grading stand. Overall, VIA-derived LMA measurements were highly accurate for all three procedures compared with expert-gridded (R2 = 0.92, 0.90, and 0.84 for Procedures 1, 2, and 3, respectively) and acetate/planimeter-traced (R2 = 0.94, 0.93, and 0.86 for Procedures 1, 2, and 3, respectively) LMA measurements. Instrument LMA repeatability also was comparable to expert-gridded and acetate/planimeter-traced LMA repeatability, as the means of the absolute differences between individual measurements and the average of those same measurements per LM were 1.29, 1.35, 0.52, 0.84, and 1.87 cm2 for expert-gridded, acetate/planimeter-traced, and VIA Procedures 1, 2, and 3, respectively. Therefore, VIA instrumentation can be used to assess beef carcass LMA in both a stationary and operational scenario with high levels of accuracy and repeatability.

Effectiveness of the SmartMV prototype BeefCam System to sort beef carcasses into expected palatability groups.

This study was conducted to determine the effectiveness of the SmartMV prototype BeefCam Video Imaging System (prototype BeefCam) for classifying beef carcasses into palatability ("certified" or "not certified" as palatable) groups. Carcasses (n = 769) were selected from four beef-packing plants to represent three USDA quality grade groups (Top Choice, TC; Low Choice, LC; and Select, SE). Following chilling, a prototype BeefCam image of the longissimus muscle was obtained for each carcass. Strip loins were collected from the left side of each carcass and aged for 10 d; Warner-Bratzler shear force (WBSF; n = 769) values and consumer panel ratings (hedonic, end-anchored, 9-point ratings for overall like/dislike; n = 500 carcasses) were obtained for cooked steaks. Using information from the images, two regression models were developed to predict the first principal component of WBSF and consumer panel ratings for sorting carcasses based on expected eating quality. Model I used only prototype BeefCam output, whereas Model II used prototype BeefCam output and a coded value for quality grade group. For both models, carcasses with a predicted value of less than 0.0 were certified as producing palatable beef Additional carcasses (n = 292) were evaluated at a fifth and separate packing plant by prototype BeefCam to validate Models I and II. A strip loin was collected from each carcass and WBSF was measured after 14 d of aging. The percentages of validation carcasses that generated tough (WBSF > or = 4.5 kg) steaks were 6.5,5.8,10.7, and 7.9% for, TC, LC, SE, and all carcasses, respectively. Use of Model I certified 51.9, 47.6, 43.8, and 47.3% of TC, LC, SE, and all carcasses, respectively. Of the carcasses certified by use of Model I, 0.0,0.0, 4.1, and 1.4% of TC, LC, SE, and all carcasses, respectively, generated tough steaks. Use of Model II certified 59.7, 47.6, 25.0, and 42.1% of TC, LC, SE, and all carcasses, respectively. Of the carcasses certified by use of Model II, 2.2, 0.0, 3.6, and 1.6% of TC, LC, SE, and all carcasses, respectively, generated tough steaks. For both models, the frequency of carcasses that produced tough steaks in the certified group was lower (P < 0.05) for all validation carcasses sampled compared with that of the original carcass population. Based on the decrease in the frequency of carcasses that produced tough steaks, further development of a commercial BeefCam system is warranted.

Online prediction of beef tenderness using a computer vision system equipped with a BeefCam module.

Four experiments were conducted in two commercial packing plants to evaluate the effectiveness of a commercial online video image analysis (VIA) system (the Computer Vision System equipped with a BeefCam module [CVS BeefCam]) to predict tenderness of beef steaks using online measurements obtained at chain speeds. Longissimus muscle (LM) samples from the rib (Exp. 1, 2, and 4) or strip loin (Exp. 3) were obtained from each carcass and Warner-Bratzler shear force (WBSF) was measured after 14 d of aging. The CVS BeefCam output variable for LM area, adjusted for carcass weight (cm2/kg), was correlated (P < 0.05) with WBSF values in all experiments. The CVS BeefCam lean color measurements, a* and b*, were effective (P < 0.05) in all experiments for segregating carcasses into groups that produced LM steaks differing in WBSF values. Fat color measurements by CVS BeefCam were usually ineffective for segregating carcasses into groups differing in WBSF values; however, in Exp. 4, fat b* identified a group of carcasses that produced tough LM steaks. Quality grade factors accounted for 3, 18, 21, and 0% of the variation in WBSF among steaks in Exp. 1 (n = 399), 2 (n = 195), 3 (n = 304), and 4 (n = 184), respectively, whereas CVS BeefCam output variables accounted for 17, 30, 19, and 6% of the variation in WBSF among steaks in Exp. 1, 2, 3, and 4, respectively. A multiple linear regression equation developed with data from Exp. 2 accurately classified carcasses in Exp. 1 and 4 and thereby may be useful for decreasing the likelihood that a consumer would encounter a tough (WBSF > 4.5 kg) LM steak in a group classified as "tender" by CVS BeefCam compared with an unsorted population. Online measurements of beef carcasses by use of CVS BeefCam were useful for predicting the tenderness of beef LM steaks, and sorting carcasses using these measurements could aid in producing groups of beef carcasses with more uniform LM steak tenderness.

Injection of beef strip loins with solutions containing sodium tripolyphosphate, sodium lactate, and sodium chloride to enhance palatability.

Beef strip loins (46 U.S. Choice loins and 49 U.S. Select loins) were used to evaluate the potential for enhancing beef tenderness, juiciness, and flavor by injecting fresh cuts with solutions containing sodium tripolyphosphate, sodium lactate, and sodium chloride. One half of each loin served as an untreated control, and the other half was injected with either distilled water (110% of raw weight) or a solution containing phosphate/lactate/chloride solution (107.5, 110, 112.5, or 115% of raw weight). All phosphate/lactate/chloride solutions were formulated to produce injected product concentrations of .25% sodium tripolyphosphate, .5% sodium chloride, and 2.5% sodium lactate. Ten additional U.S. Select loins were injected to 110% of raw weight with a phosphate-only solution (final product concentration of .25% sodium tripolyphosphate) for comparison with Select loins injected to 110% with phosphate/lactate/chloride and with distilled water. Steaks from each control and treated loin section were cooked to two final internal temperatures (66 degrees C and 77 degrees C) for sensory panel evaluation and shear force measurement. Injection of subprimal cuts with phosphate/lactate/chloride solutions improved tenderness (P < .05), juiciness (P < .05), and cooked beef flavor (P < .10) of strip loin steaks and was especially effective for maintaining tenderness and juiciness of steaks cooked to the higher final internal temperature. Injection of Select loins with a solution containing only sodium tripolyphosphate was not effective for improving beef tenderness or juiciness and tended to impart off-flavors characterized by sensory panelists as soapy and sour. Injection of fresh cuts with phosphate/lactate/chloride solutions could assist the beef industry's efforts to improve product quality and consistency.