Technical aspects of total spondylectomy of C2.

BACKGROUND: Tumorous involvement of the second cervical vertebra is an infrequent, but severe disease. Primary tumors and solitary metastases can be addressed by a radical procedure, a complete removal of the whole compartment. The second cervical vertebra has a highly complex anatomy, and its operation requires considerable surgical skills. The aim of this retrospective study is to present technical aspects of complete resection of C2 for tumor indications, clinical and radiological evaluation of our group of patients and comparison of results of recent reports on surgery in this region in the literature. METHODS: Between 2006 and 2019 we performed 10 total resections of C2 for primary bone tumor or solitary metastasis at our department. Operation was indicated for chordoma in 4 cases and for other diagnoses (plasmacytoma, EWSA, metastases of papillary thyroid carcinoma, medullary thyroid carcinoma, lung carcinoma and sinonasal carcinoma) in one case each. The operative procedure was in all cases performed in two steps. It always started with the posterior approach. The anterior procedure was scheduled according to the patient's condition after an average interval of 16.9 days (range 7-21). RESULTS: A stable upper cervical spine was achieved in all patients. A solid bone fusion over the whole instrumentation was present in all living patients and they returned to their preoperative activity level. By the final follow-up 6 patients died: one patient died on the 5th postop day because of diffuse uncontrollable bleeding from surgical wound, three patients died of generalization of the underlying disease and two patients due to complications associated with local recurrence of the disease. In addition to regular follow-ups, the surviving patients (N.=4) were also examined upon completion of the study, i.e., on average 91 months (range 17-179 months) postoperatively. With exclusion of an early deceased patient, the average follow-up period of deceased patients was 34.6 months (range 9-55) (N.=5). The average follow-up of the whole group of patients was 59,7 months (N.=9). CONCLUSIONS: Total spondylectomy of C2 is an exceptional surgical procedure associated with risk of serious complications but offers chance for a complete recovery of the patient. Defining indications accurately, especially in solitary metastases, is very difficult even with current level of imaging and other testing. The quality of life of long-term surviving patients in our study was not significantly impacted.

A Universal Strategy for Synthesis of Agropyrenol Family. Total Synthesis of Agropyrenol, Sordarial, and Heterocornol A and B.

A divergent strategy for natural polyketides synthesis has been designed. This synthetic route allowed chemical alterations leading to all stereoisomers of the natural agropyrenol 1, sordarial 2, and heterocornol B 4. Key steps involve desymmetrization of divinylcarbinol using asymmetric Sharpless epoxidation and Heck coupling of an easily available aromatic partner and prepared chiral alkene. The versatility of the synthetic method was demonstrated on the preparation of heterocornol A 3 and sordariol 5. The absolute and relative configurations of prepared natural compounds 2·1/3C6H12 and 4 were confirmed and assigned by single-crystal X-ray analysis.

Total spondylectomy of C2: report of three cases and review of the literature.

STUDY DESIGN: A report on 3 patients undergoing total spondylectomy of the C2 vertebra for tumor and the technique for C1-3 reconstruction. OBJECTIVE: To illustrate the feasibility of complete resection of the C2 vertebra with preservation of the vertebral arteries and cervical nerve roots. BACKGROUND: Total spondylectomy provides improved progression free survival in many patients with locally aggressive spinal tumors. However, the perceived technical demands of effectively preserving both vertebral arteries, maintaining cervical nerve roots, and biomechanical reconstruction of the cranial-cervical junction often dissuades surgeons from carrying out total spondylectomy of the C2 vertebra. METHODS: A review of 3 patients undergoing total C2 spondylectomy for tumor (thyroid adenocarcinoma, chordoma, and solitary plasmocytoma) was done. The surgical procedure that was undertaken and the technique used are described. RESULTS: Postoperatively, all 3 patients had uneventful postoperative recovery with gradual improvement in their neurologic functions. CONCLUSION: Preservation of bilateral vertebral arteries and all cervical nerve roots is feasible when carrying out intralesional total spondylectomy in patients with C2 vertebral body tumors and should be considered in patients thought to benefit from total C2 vertebra excision. In an attempt to augment construct stability and provide anterior column load sharing, we have used mesh cage and iliac crest graft between C1 and C3 held in place with a short cervical plate without complications.

Implant complications, fusion, loss of lordosis, and outcome after anterior cervical plating with dynamic or rigid plates: two-year results of a multi-centric, randomized, controlled study.

STUDY DESIGN: Prospective, controlled, randomized, multicenter study. OBJECTIVE: To analyze implant complications and speed. SUMMARY OF BACKGROUND DATA: Rigid plate designs, in which the screws are locked to the plate, are in common use and thought to provide more fixation than dynamic designs, in which the screws may glide when the graft is settling. The aim of the study is to analyze (1) implant complications, (2) speed of fusion, (3) loss of lordosis, and (4) clinical outcome in both types of plates. METHODS: One hundred thirty-two patients were included and assigned by randomization to one of the groups in which they received a routine anterior cervical discectomy and autograft fusion with either a dynamic plate (ABC, study group) or a rigid plate (CSLP, control group). At discharge, after 3 and 6 months and finally after 2 years, implant complications, segmental mobility, absence of radiolucencies, absence of bone sclerosis, evidence of bridging trabecular bone, loss of lordosis, Visual Analog Scale (VAS) and Neck Disability Score were recorded. All radiographic measurements were performed by an independent radiologist. RESULTS: There have been 4 patients with implant complications within the control group and no implant complications within the study group, P = 0.045. Mean segmental mobility before discharge for the study group was 1.7 mm, 1.4 mm after 3 months, 0.8 mm after 6 months, and 0.4 mm after 2 years. For the control group, these values were 1.0, 1.8, 1.6, and 0.5 mm. The difference at 6 months between both groups was significant (P = 0.024). Neither absence of radiolucencies, nor absence of sclerosis, nor evidence of bridging bone showed significant differences between the 2 groups through the postoperative follow-up (P > 0.05). The loss of segmental lordosis for the study group with respect to intraoperative radiograph was 1.3 degrees at discharge and 4.3 degrees after 2 years. For the control group, these values were 0.9 degrees , 0.7 degrees . The difference at 2 years was significant (P = 0.003). Clinical postoperative outcome (VAS and ODI) was not different between the 2 groups through the postoperative follow-up (P > 0.05). CONCLUSION: Dynamic cervical plate designs provide less implant complications (no patient) compared with rigid plate designs (4 patients). Speed of fusion was faster in the presence of a dynamic plate. However, loss of segmental lordosis is significantly higher if dynamic plates are used, which did not result in differences regarding clinical outcome between dynamic and constrained plates after 2 years. Thus, dynamic plates should be considered to be the preferred treatment option because of the lower risk for implant failure-related revision surgery.

Fusion and failure following anterior cervical plating with dynamic or rigid plates: 6-months results of a multi-centric, prospective, randomized, controlled study.

Anterior cervical plate fixation is an approved surgical technique for cervical spine stabilization in the presence of anterior cervical instability. Rigid plate design with screws rigidly locked to the plate is widely used and is thought to provide a better fixation for the treated spinal segment than a dynamic design in which the screws may slide when the graft is settling. Recent biomechanical studies showed that dynamic anterior plates provide a better graft loading possibly leading to accelerated spinal fusion with a lower incidence of implant complications. This, however, was investigated in vitro and does not necessarily mean to be the case in vivo, as well. Thus, the two major aspects of this study were to compare the speed of bone fusion and the rate of implant complications using either rigid- or dynamic plates. The study design is prospective, randomized, controlled, and multi-centric, having been approved by respective ethic committees of all participating sites. One hundred and thirty-two patients were included in this study and randomly assigned to one of the two groups, both undergoing routine level-1- or level-2 anterior cervical discectomy with autograft fusion receiving either a dynamic plate with screws being locked in ap - position (ABC, Aesculap, Germany), or a rigid plate (CSLP, Synthes, Switzerland). Segmental mobility and implant complications were compared after 3- and 6 months, respectively. All measurements were performed by an independent radiologist. Mobility results after 6 months were available for 77 patients (43 ABC/34 CSLP). Mean segmental mobility for the ABC group was 1.7 mm at the time of discharge, 1.4 mm after 3 months, and 0.8 mm after 6 months. For the CSLP- group the measurements were 1.0, 1.8, and 1.7 mm, respectively. The differences of mean segmental mobility were statistically significant between both groups after 6 months (P = 0.02). Four patients of the CSLP-group demonstrated surgical hardware complications, whereas no implant complications were observed within the ABC-group (P = 0.0375). Dynamic plate designs provided a faster fusion of the cervical spine compared with rigid plate designs after prior spinal surgery. Moreover, the rate of implant complications was lower within the group of patients receiving a dynamic plate. These interim results refer to a follow-up period of 6 months after prior spinal surgery. Further investigations will be performed 2 years postoperatively.

Atlantoaxial fixation using the polyaxial screw-rod system.

The aim of this study is to evaluate the first results of the atlantoaxial fixation using polyaxial screw-rod system. Twenty-eight patients followed-up 12-29 months (average 17.1 months) were included in this study. The average age was 59.5 years (range 23-89 years). The atlantoaxial fusion was employed in 20 patients for an acute injury to the upper cervical spine, in 1 patient with rheumatoid arthritis for atlantoaxial vertical instability, in 1 patient for C1-C2 osteoarthritis, in 2 patients for malunion of the fractured dens. Temporary fixation was applied in two patients for type III displaced fractures of the dens and in two patients for the atlantoaxial rotatory dislocation. Retrospectively, we evaluated operative time, intraoperative bleeding and the interval of X-ray exposure. The resulting condition was subjectively evaluated by patients. We evaluated also the placement, direction and length of the screws. Fusion or stability in the temporary fixation was evaluated on radiographs taken at 3, 6, 12 weeks and 6 and 12 months after the surgery. As concerns complications, intraoperatively we monitored injury of the nerve structures and the vertebral artery. Monitoring of postoperative complications was focused on delayed healing of the wound, breaking or loosening of screws and development of malunion. Operative time ranged from 35 to 155 min, (average 83 min). Intraoperative blood loss ranged from 50 to 1,500 ml (average 540 ml). The image intensifier was used for a period of 24 s to 2 min 36 s (average 1 min 6 s). Within the postoperative evaluation, four patients complained of paresthesia in the region innervated by the greater occipital nerve. A total of 56 screws were inserted into C1, their length ranged from 26 to 34 mm (average, 30.8 mm). All screws were positioned correctly in the C1 lateral mass. Another 56 screws were inserted into C2. Their length ranged from 28 to 36 mm (average 31.4 mm). Three screws were malpositioned: one screw perforated the spinal canal and two screws protruded into the vertebral artery canal. C1-C2 stability was achieved in all patients 12 weeks after the surgery. No clinically manifested injury of the vertebral artery or nerve structures was observed in any of these cases. As for postoperative complications, we recorded wound dehiscence in one patient. The Harms C1-C2 fixation is a very effective method of stabilizing the atlantoaxial complex. The possibility of a temporary fixation without damage to the atlantoaxial joints and of reduction after the screws and rods had been inserted is quite unique.