Assessment of some toxic elements (Co, Cr, Mn, Se, and As) in muscle, offal, hair, and blood of camels (Camelus dromedaries) and their risk assessment.

Background: Camel meat tainted with heavy metals or trace elements may pose a health risk to consumers. Heavy metal contamination poses a severe danger due to both their toxicity and bioaccumulation in the food chain. Aim: To estimate the residual levels of heavy metals (Co, Cr, Mn, Se, and As) in muscle, liver, kidney, hair, and serum of three camel breeds (Magaheem, Maghateer, and Wadha) collected from Al-Omran abattoir, Al-Ahsa, Saudi Arabia. Methods: A total of 225 tissue samples (muscles, liver, kidney, serum, and hair) were taken and analyzed using an Atomic Absorption Spectrophotometer. Health risk assessment was assessed using the guidelines set by the US Environmental Protection Agency. Results: Camel breed significantly (p < 0.05) influences Co, Cr, Mn, and Se accumulation and distribution in organs and muscle; however, arsenic accumulation was not significantly affected (p < 0.05) by camel breeds. The highest values of Co, Cr, Se, and Mn in all examined samples were detected in the liver samples of Maghateer and Magaheem breeds. Furthermore, significant strong positive correlation between serum and liver cobalt, chromium, manganese, and arsenic. The estimated daily intake owing to camel meat consumption was less than the tolerated daily intake. Conclusion: Heavy metals were distributed among different breeds of camel. Trace elements (Pb and Cd) in meat and offal were below the international maximum permissible limit. The correlation between samples reflects the role of hair as a good tool for the identification of heavy metal pollution.

Cadmium-Based Quantum Dots Alloyed Structures: Synthesis, Properties, and Applications.

Cadmium-based alloyed quantum dots are one of the most popular metal chalcogenides in both the industrial and research fields owing to their extraordinary optical and electronic properties that can be manipulated by varying the compositional ratio in addition to size control. This report aims to cover the main information concerning the synthesis techniques, properties, and applications of Cd-based alloyed quantum dots. It provides a comprehensive overview of the most common synthesis methods for these QDs, which include hot injection, co-precipitation, successive ionic layer adsorption and reaction, hydrothermal, and microwave-assisted synthesis methods. This detailed literature highlights the optical and structural properties of both ternary and quaternary quantum dots. Also, this review provides the high-potential applications of various alloyed quantum dots.

2D MXenes Embedded Perovskite Hydrogels for Efficient and Stable Solar Evaporation.

Solar evaporation is a facile and promising technology to efficiently utilize renewable energy for freshwater production and seawater desalination. Here, the fabrication of self-regenerating hydrogel composed of 2D-MXenes nanosheets embedded in perovskite La 0.6Sr 0.4Co 0.2Fe 0.8O3- δ (LSCF)/polyvinyl alcohol hydrogels for efficient solar-driven evaporation and seawater desalination is reported. The mixed dimensional LSCF/Ti3C2 composite features a localized surface plasmonic resonance effect in the polymeric network of polyvinyl alcohol endows excellent evaporation rates (1.98 kg m-2 h-1) under 1 k Wm-2 or one sun solar irradiation ascribed by hydrophilicity and broadband solar absorption (96%). Furthermore, the long-term performance reveals smooth mass change (13.33 kg m-2) during 8 h under one sun. The composite hydrogel prompts the dilution of concentrated brines and redissolves it back to water (1.2 g NaCl/270 min) without impeding the evaporation rate without any salt-accumulation. The present research offers a substantial opportunity for solar-driven evaporation without any salt accumulation in real-life applications.

Risk assessment of toxic residues among some freshwater and marine water fish species.

Egypt has several beaches, as well as the Nile River and a few lakes; therefore, it could compensate for the lack of protein in red meat with fish. Fish, however, may become a source of heavy metal exposure in humans. The current study was to assess the level of five toxic metals, lead (Pb), cadmium (Cd), mercury (Hg), arsenic (As), and aluminum (Al), in six species, namely, Oreochromis niloticus (O. niloticus), Mugil cephalus (M. cephalus), Lates niloticus (L. niloticus), Plectropomus leopardus (P. leopardus), Epinephelus tauvina (E. tauvina), and Lethrinus nebulosus (L. nebulosus), collected from the El-Obour fish market in Egypt. The residual concentrations of the tested toxic metals in the examined O. niloticus, M. cephalus, L. niloticus, E. tauvina, P. leopardus, and L. nebulosus species were found to be higher than the European Commission's maximum permissible limits (MPL) for Pb and Cd by 10 and 20%, 15 and 65%, 75 and 15%, 20 and 65%, 15 and 40%, and 25 and 5%. In contrast, 30% of L. niloticus exceeded the MPL for Hg. It was shown that the average estimated daily intake (EDI) and the target hazard quotient (THQ) in fish samples are below safety levels for human consumption and hazard index (HI < 1). From the human health point of view, this study showed that there was no possible health risk to people due to the intake of any studied species under the current consumption rate in the country.

Superparamagnetic Multifunctionalized Chitosan Nanohybrids for Efficient Copper Adsorption: Comparative Performance, Stability, and Mechanism Insights.

To limit the dangers posed by Cu(II) pollution, chitosan-nanohybrid derivatives were developed for selective and rapid copper adsorption. A magnetic chitosan nanohybrid (r-MCS) was obtained via the co-precipitation nucleation of ferroferric oxide (Fe3O4) co-stabilized within chitosan, followed by further multifunctionalization with amine (diethylenetriamine) and amino acid moieties (alanine, cysteine, and serine types) to give the TA-type, A-type, C-type, and S-type, respectively. The physiochemical characteristics of the as-prepared adsorbents were thoroughly elucidated. The superparamagnetic Fe3O4 nanoparticles were mono-dispersed spherical shapes with typical sizes (~8.5-14.7 nm). The adsorption properties toward Cu(II) were compared, and the interaction behaviors were explained with XPS and FTIR analysis. The saturation adsorption capacities (in mmol.Cu.g-1) have the following order: TA-type (3.29) > C-type (1.92) > S-type (1.75) > A-type(1.70) > r-MCS (0.99) at optimal pH0 5.0. The adsorption was endothermic with fast kinetics (except TA-type was exothermic). Langmuir and pseudo-second-order equations fit well with the experimental data. The nanohybrids exhibit selective adsorption for Cu(II) from multicomponent solutions. These adsorbents show high durability over multiple cycles with desorption efficiency > 93% over six cycles using acidified thiourea. Ultimately, QSAR tools (quantitative structure-activity relationships) were employed to examine the relationship between essential metal properties and adsorbent sensitivities. Moreover, the adsorption process was described quantitatively, using a novel three-dimensional (3D) nonlinear mathematical model.

Silver Decorated and Graphene Wrapped Polypyrrole@Ni(OH)2 Quaternary Nanocomposite for High Performance Energy Storage Devices.

In this work, silver (Ag) anchored over graphene (GN) wrapped polypyrrole (PPy)@ nickel hydroxide (Ni(OH)2) nanocomposites were synthesized through a combination of oxidative polymerization and hydrothermal processes. The synthesized Ag/GN@PPy-Ni(OH)2 nanocomposites were characterized for their morphological characteristics by field emission scanning electron microscopy (FESEM), while the structural investigations were done by X-ray diffraction and X-ray photoelectron spectroscopy (XPS). The FESEM studies showed Ni(OH)2 flakes and silver particles attached over the surface of PPy globules, along with the presence of GN sheets and spherical silver particles. The structural analysis also showed the presence of constituents, i.e., Ag, Ni(OH)2, PPy, GN, and their interaction, therefore vouching that the synthesis protocol is efficacious. The electrochemical (EC) investigations were done in potassium hydroxide (1 M KOH) using a three electrode setup. The quaternary Ag/GN@PPy-Ni(OH)2 nanocomposite electrode showed the highest specific capacity of 237.25 C g-1. The highest electrochemical performance of the quaternary nanocomposite is associated with the synergistic/additional effect of PPy, Ni(OH)2, GN, and Ag. The assembled supercapattery with Ag/GN@PPy-Ni(OH)2 as a positive and activated carbon (AC) as a negative electrode displayed eminent energy density of 43.26 Wh kg-1 with the associated power density of 750.00 W kg-1 at a current density of 1.0 A g-1. The cyclic stability of the supercapattery (Ag/GN@PPy-Ni(OH)2//AC), comprising a battery-type electrode, displayed a high cyclic stability of 108.37% after 5500 cycles.

Room Temperature Synthesized TiO2 Nanoparticles for Two-Folds Enhanced Mechanical Properties of Unsaturated Polyester.

Using of nano-inclusion to reinforce polymeric materials has emerged as a potential technique to achieve an upper extreme of specific strength. Despite the significant improvement of mechanical properties via nano-reinforcements, the commercial application of such nano-composites is still restricted, due to high cost and unwanted aggregation of nanoparticles in the polymer matrix. To address these issues, here we proposed a scalable and economical synthesis of TiO2 at low temperatures, resulting in self-dispersed nanoparticles, without any surfactant. As lower energy is consumed in the synthesis and processing of such nanoparticles, so their facile gram-scale synthesis is possible. The defect-rich surface of such nanoparticles accommodates excessive dangling bonds, serving as a center for the functional groups on the surface. Functional surface enables high dispersion stability of room temperature synthesized TiO2 particles. With this motivation, we optimized the processing conditions and concentration of as-synthesized nano-particles for better mechanical properties of unsaturated polyester (UP) resin. The composite structure (UP-TiO2) showed nearly two folds higher tensile, flexural, and impact strength, with 4% content of nanoparticles. Characterization tools show that these better mechanical properties are attributed to a strong interface and superior dispersion of nanoparticles, which facilitate better stress distribution in the composite structure. In addition, the crack generation and propagation are restricted at a much smaller scale in nanocomposites, therefore significant improvement in mechanical properties was observed.

Efficient Tuning of the Opto-Electronic Properties of Sol-Gel-Synthesized Al-Doped Titania Nanoparticles for Perovskite Solar Cells and Functional Textiles.

The efficient electron transport layer (ETL) plays a critical role in the performance of perovskites solar cells (PSCs). Ideally, an unobstructed network with smooth channels for electron flow is required, which is lacking in the pristine TiO2-based ETL. As a potential solution, here we tuned the structure of TiO2 via optimized heteroatom doping of Al. Different concentrations (1, 2, and 3 wt%) of Al were doped in TiO2 and were successfully applied as an ETL in PSC using spin coating. A significant difference in the structural, opto-electronic, chemical, and electrical characteristics was observed in Al-doped TiO2 structures. The opto-electronic properties revealed that Al doping shifted the absorption spectra toward the visible range. Pure titania possesses a bandgap of 3.38 eV; however, after 1, 2, and 3% Al doping, the bandgap was linearly reduced to 3.29, 3.25, and 3.18 eV, respectively. In addition, higher light transmission was observed for Al-doped TiO2, which was due to the scattering effects of the interconnected porous morphology of doped-TiO2. Al-doped titania shows higher thermal stability and a 28% lower weight loss and can be operated at higher temperatures compared to undoped titania (weight loss 30%) due to the formation of stable states after Al doping. In addition, Al-doped TiO2 showed significantly high conductivity, which provides smooth paths for electron transport. Thanks to the effective tuning of band structure and morphology of Al-doped TiO2, a significant improvement in current densities, fill factor, and efficiency was observed in PSCs. The combined effect of better Jsc and FF renders higher efficiencies in Al-doped TiO2, as 1, 2, and 3% Al-doped TiO2 showed 12.5, 14.1, and 13.6% efficiency, respectively. Compared to undoped TiO2 with an efficiency of 10.3%, the optimized 2% Al doping increased the efficiency up to 14.1%. In addition, Al-doped TiO2 also showed improvements in antibacterial effects, required for photoactive textiles.

Discovery of Type II Interlayer Trions.

In terms of interlayer trions, electronic excitations in van der Waals heterostructures (vdWHs) can be classified into Type I (i.e., two identical charges in the same layer) and Type II (i.e., two identical charges in the different layers). Type I interlayer trions are investigated theoretically and experimentally. By contrast, Type II interlayer trions remain elusive in vdWHs, due to inadequate free charges, unsuitable band alignment, reduced Coulomb interactions, poor interface quality, etc. Here, the first observation of Type II interlayer trions is reported by exploring band alignments and choosing an atomically thin organic-inorganic system-monolayer WSe2 /bilayer pentacene heterostructure (1L + 2L HS). Both positive and negative Type II interlayer trions are electrically tuned and observed via PL spectroscopy. In particular, Type II interlayer trions exhibit in-plane anisotropic emission, possibly caused by their unique spatial structure and anisotropic charge interactions, which is highly correlated with the transition dipole moment of pentacene. The results pave the way to develop excitonic devices and all-optical circuits using atomically thin organic-inorganic bilayers.

Recent Advances and Future Perspectives of Metal-Based Electrocatalysts for Overall Electrochemical Water Splitting.

Recently, the growing demand for a renewable and sustainable fuel alternative is contingent on fuel cell technologies. Even though it is regarded as an environmentally sustainable method of generating fuel for immediate concerns, it must be enhanced to make it extraordinarily affordable, and environmentally sustainable. Hydrogen (H2 ) synthesis by electrochemical water splitting (ECWS) is considered one of the foremost potential prospective methods for renewable energy output and H2 society implementation. Existing massive H2 output is mostly reliant on the steaming reformation of carbon fuels that yield CO2 together with H2 and is a finite resource. ECWS is a viable, efficient, and contamination-free method for H2 evolution. Consequently, developing reliable and cost-effective technology for ECWS was a top priority for scientists around the globe. Utilizing renewable technologies to decrease total fuel utilization is crucial for H2 evolution. Capturing and transforming the fuel from the ambient through various renewable solutions for water splitting (WS) could effectively reduce the need for additional electricity. ECWS is among the foremost potential prospective methods for renewable energy output and the achievement of a H2 -based economy. For the overall water splitting (OWS), several transition-metal-based polyfunctional metal catalysts for both cathode and anode have been synthesized. Furthermore, the essential to the widespread adoption of such technology is the development of reduced-price, super functional electrocatalysts to substitute those, depending on metals. Many metal-premised electrocatalysts for both the anode and cathode have been designed for the WS process. The attributes of H2 and oxygen (O2 ) dynamics interactions on the electrodes of water electrolysis cells and the fundamental techniques for evaluating the achievement of electrocatalysts are outlined in this paper. Special emphasis is paid to their fabrication, electrocatalytic performance, durability, and measures for enhancing their efficiency. In addition, prospective ideas on metal-based WS electrocatalysts based on existing problems are presented. It is anticipated that this review will offer a straight direction toward the engineering and construction of novel polyfunctional electrocatalysts encompassing superior efficiency in a suitable WS technique.

Heavy metal contents in salted fish retailed in Egypt: Dietary intakes and health risk assessment.

Background: In Egypt, salted fish is considered a typically processed fish, including salted sardine, salted mullet (feseikh), keeled mullet (sahlia), and herrings. High-quality protein, polyunsaturated fatty acids, vital amino acids, and trace minerals such as magnesium and calcium are all abundant in fish. However, eating salted fish can expose people to toxins found in the environment, such as heavy metals. Aim: In Zagazig, Egypt, four types of locally produced salted fish-salted sardine, feseikh, sahlia, and herrings-were tested for heavy metals, specifically lead (Pb), cadmium (Cd), arsenic (As), and mercury (Hg). Second, the assessed heavy metals linked to the Egyptian population's consumption of salted fish were used to calculate estimated daily intakes (EDIs) and potential health hazards, such as hazard quotient (HQ) and hazard index (HI). Methods: Samples of salted herrings, feseikh, sahlia, and sardines were gathered from the markets in Zagazig. Samples of salted fish were subjected to acid digestion and then heavy metal extraction. Atomic absorption spectrometers (AAS) were used to measure heavy metals. HI, HQ, and EDI were computed computationally. Results: With the exception of mercury, which was not found in the salted herrings, the recorded results showed that all of the tested metals were present in the samples that were evaluated. The herrings contained residual Pb and Cd contents that were highest, followed by sardine, feseikh, and sahlia, in that order. After sardine, herrings, and sahlia, feseikh has the greatest concentration. Sardine, feseikh, and sahlia had the highest quantities of mercury, in that order. A number of samples were found to be above the maximum allowable levels. There were no apparent hazards associated with consuming such conventional fish products, according to the computed HQ and HI values for the heavy metals under investigation based on the daily intakes. Conclusion: Samples of salted fish sold in Zagazig, Egypt, had high quantities of the hazardous elements Pb, Cd, As, and Hg. Due to the bioaccumulation and biomagnification characteristics of these studied metals, such data should be taken carefully even though the computed health hazards revealed no potential problems.

Detection and health risk assessment of toxic heavy metals in chilled and frozen meat collected from Sharkia province in Egypt.

Background: The consumption of meat is a fundamental aspect of global diets, providing essential nutrients and proteins vital for human nutrition. However, ensuring the safety of meat products has become progressively challenging due to potential contamination by toxic heavy metals (HMs) and pathogenic microorganisms. Aim: This study focuses on assessing the prevalence of Lead (Pb), Mercury (Hg), Arsenic (As), and Cadmium (Cd), in chilled and frozen meat in Sharkia Governorate, Egypt. Methods: A total of 30 samples, comprising 15 chilled and 15 frozen beef samples, were collected from various marketing stores in Sharkia. Analysis of toxic metals was conducted via atomic absorption spectrophotometer (AAS) following wet digestion. Results: The average levels (mg/kg) in chilled meat samples were found to be 0.64 ± 0.14 for Pb, undetectable for Hg, 0.02 ± 0.14 for Cd, and 4.66 ± 0.57 for As. In frozen samples, the average concentrations were 0.89 ± 0.21 for Pb, 0.08 ± 0.03 for Hg, 0.02 ± 0.004 Cd, and 5.32 ± 0.59 for As. Generally, the levels of HMs in frozen meat samples were observed to be higher than in chilled samples. Importantly, the levels of Pb were higher than maximum residual concentrations [maximum permissible limit (MPL)] in 53.3% of the chilled and 66.6% of the frozen, Cd levels in chilled and frozen were within the permissible concentrations in all samples, Hg was not identified in all the chilled and in 67% of frozen samples, and As levels were higher than the permissible levels in all samples chilled and frozen. The assessment of human health risk for adults revealed an estimated daily intake (EDI) value of beef meat below the threshold of the oral reference dose (RFD) for all analyzed metals except for As, where 46.7% of chilled samples and 60% of frozen samples exceeded the RFD. Furthermore, both the Hazard Quotient (THQ) for As and Hazard index (HI) for all the analyzed metals were above 1 in 33.3% of chilled samples and 46.7% of frozen samples. Conclusion: This indicates the remarkable adverse effects on human health associated with the consumption of meat with elevated levels of HMs, emphasizing the need for stringent quality control measures within the food industry.

Health risk assessment of organochlorine pesticide residues in edible tissue of seafood.

Fish is one of the most valuable foods with high-quality animal protein. However, aquaculture, or ingesting contaminated food, allows organochlorine pesticides (OCPs) to enter the fish's body, and therefore, it negatively impacted public health. One-hundred and twenty random samples of Clupea harengus (C. harengus), Mugil cephalus (M. cephalus), Sardinella aurita (S. aurita), Oreochromis niloticus (O. niloticus), Neptunus pelagicus (N. pelagicus) and Sepia savigngi (S. savigngi) (n = 20 each) were collected from local markets in Mansoura city, Egypt. Samples were checked to see whether any residues of OCPs with the application of risk assessment due to their consumption by Mansoura citizens. The findings indicated that summation hexachlorocyclohexane (∑HCH) in examined seafood samples ranged from 0.27 ± 0.13 in N. pelagicus to 61.61 ± 52.03 µg.kg-1 in S. aurita. Also, the γ-HCH isomer was considered the more prominent among isomers. Hexachlorobenzene (HCB) was found in five different species, with mean values of 2.03 ± 1.85, 1.5.7 ± 1.17, 0.94 ± 0.87, 0.35 ± 0.06, and 0.18 ± 0.06 µg.kg-1 in C. harengus, S. aurita, M. cephlaus, O. niloticus, and S. savigngi. Moreover, summation of Heptachlors (∑HPTs) was 10.19 ± 7.63, 1.27 ± 0.26, 2.58 ± 0.11, 0.95 ± 0.12, 0.21 ± 0.11 and 0.32 ± 0.03 µg.kg-1 of wet weight in examined C. harengus, M. cephlaus, S. aurita, O. niloticus, N. pelagicus, and S. savigngi. Aldrin and dieldrin residues were 3.75 ± 1.31 and 4.86 ± 1.33 µg.kg-1 in C. harengu, meanwhile they were 1.61 ± 0.77 and 0.78 ± 0.04 µg.kg-1in M. cephalus. Dichlorodiphenyldichloroethylene (pp-DDE) was dominant in all examined species within different concentrations 5.08 ± 4.12, 0.98 ± 0.10, 3.07 ± 0.91, 0.93 ± 0.27, 0.08 ± 0.01 and 0.35 ± 0.02 µg.kg-1 in C. harengus, M. cephlaus, S. aurita, O. niloticus, N. pelagicus and S. savigngi, respectively. We concluded that all examined seafood samples were lower than the recommended maximum residue limit. Also, the estimated daily intake was less than the permitted daily intake. Non-carcinogenic indices of target hazard quotient and hazard index for OCPs in all examined species were less than 1.

A Tunable and Wearable Dual-Band Metamaterial Absorber Based on Polyethylene Terephthalate (PET) Substrate for Sensing Applications.

Advanced wireless communication technology claims miniaturized, reconfigurable, highly efficient, and flexible meta-devices for various applications, including conformal implementation, flexible antennas, wearable sensors, etc. Therefore, bearing these challenges in mind, a dual-band flexible metamaterial absorber (MMA) with frequency-reconfigurable characteristics is developed in this research. The geometry of the proposed MMA comprises a square patch surrounded by a square ring, which is mounted over a copper-backed flexible dielectric substrate. The top surface of the MMA is made of silver nanoparticle ink and a middle polyethylene terephthalate (PET) substrate backed by a copper groundsheet. The proposed MMA shows an absorption rate of above 99% at 24 and 35 GHz. In addition, the absorption features are also studied for different oblique incident angles, and it is found that the proposed MMA remains stable for θ = 10-50°. The frequency tunability characteristics are achieved by stimulating the capacitance of the varactor diode, which connects the inner patch with the outer ring. To justify the robustness and conformability of the presented MMA, the absorption features are also studied by bending the MMA over different radii of an arbitrary cylinder. Moreover, a multiple-reflection interference model is developed to justify the simulated and calculated absorption of the proposed MMA. It is found that the simulated and calculated results are in close agreement with each other. This kind of MMA could be useful for dual-band sensing and filtering operations.

Poly (Vinyl Alcohol)/Agar Hydrogel Electrolytes Based Flexible All-in-One Supercapacitors with Conducting Polyaniline/Polypyrrole Electrodes.

The major components of supercapacitor are electrodes and electrolytes which are fabricated using various materials and methods. Hydrogel is one such material that is used in supercapacitors as electrodes and electrolytes or both. Hydrogels are usually described as a soft and porous network of polymer materials that can swell in water because of the hydrophilic nature of its polymer chains, compriseng a 3D structure. It is well known that supercapacitors possess high-power density but low energy density. For enhancing energy density of these electrochemical cells and a boost in its electrochemical performance and specific capacity, binder free conducting polymer hydrogel electrodes have gained immense attention, especially polyaniline (PANI) and polypyrrole (PPy). Therefore, in this work, chemically crosslinked PVA/Agar hydrogel electrolytes have been prepared and employed. Agar has been added in PVA since it is environmentally friendly, biodegradable, and cost-effective natural polymer. Subsequently, the binder free polyaniline/polypyrrole electrodes were grown on the PVA/Agar hydrogel electrolytes to fabricate all-in-one flexible hydrogels. The synthesized hydrogels were characterized using X-ray diffraction (XRD) analysis, Fourier transform infrared (FTIR) analysis, Field emission scanning electron microscope (FESEM) and mechanical studies. Then, the all-in-one flexible supercapacitors were fabricated using the hydrogels. The electrochemical studies such cyclic voltammetry (CV), galvanic charge discharge (GCD), and electrochemical impedance spectroscopy (EIS) studies. The fabricated all-in-one lamination free supercapacitors showed promising results and by comparing all four samples, PAP2 where 5 mL of PVA was used in combination with 3 mL of Agar and 5 mL of PANI and PPy each, exhibited the highest areal capacitance of 750.13 mF/cm2, energy density of 103.02 µWh/cm2, and 497.22 µW/cm2 power density. The cyclic stability study revealed the 149% capacity retention after 15,000 cycles.

Effect of Polyethylene Glycol and Activated Carbon Macroparticles on Thermal Conductivity of Paraffin Wax for Thermal Storage Applications.

Low thermal conductivity is the major obstacle for the wide range utilization of phase change materials (PCMs), especially organic PCMs, for most practical applications in thermal engineering. This study investigates the potential of enhancing the charging and discharging rates of organic PCM (RT44HC) by introducing polyethylene glycol (PEG) and activated carbon macroparticles (ACMPs). Different concentrations of PEG and ACMPs ranging from 0.3 wt% to 2 wt% were tested separately. The optimized concentrations found were used as dual reinforcements to attain the highest possible thermal conductivity. The specimens were tested for a complete charging-discharging cycle using an improvised thermal apparatus. Use of ACMP alone resulted in a minimal reduction in complete charging-discharging time due to the settlement of ACMPs at the bottom after 2-3 heating-cooling cycles. However, the addition of PEG with ACMPs exhibited a reduction in charging-discharging time due to the formation of a stable dispersion. PEG served as a stabilizing agent for ACMPs. The lowest charging-discharging time of 180 min was exhibited by specimens containing 1 wt% PEG and 0.5 wt% ACMPs which is 25% lower compared to bare PCM.

Glioma diagnosis and therapy: Current challenges and nanomaterial-based solutions.

Glioma is often referred to as one of the most dreadful central nervous system (CNS)-specific tumors with rapidly-proliferating cancerous glial cells, accounting for nearly half of the brain tumors at an annual incidence rate of 30-80 per a million population. Although glioma treatment remains a significant challenge for researchers and clinicians, the rapid development of nanomedicine provides tremendous opportunities for long-term glioma therapy. However, several obstacles impede the development of novel therapeutics, such as the very tight blood-brain barrier (BBB), undesirable hypoxia, and complex tumor microenvironment (TME). Several efforts have been dedicated to exploring various nanoformulations for improving BBB permeation and precise tumor ablation to address these challenges. Initially, this article briefly introduces glioma classification and various pathogenic factors. Further, currently available therapeutic approaches are illustrated in detail, including traditional chemotherapy, radiotherapy, and surgical practices. Then, different innovative treatment strategies, such as tumor-treating fields, gene therapy, immunotherapy, and phototherapy, are emphasized. In conclusion, we summarize the article with interesting perspectives, providing suggestions for future glioma diagnosis and therapy improvement.

Infrared Light Emission Devices Based on Two-Dimensional Materials.

Two-dimensional (2D) materials have garnered considerable attention due to their advantageous properties, including tunable bandgap, prominent carrier mobility, tunable response and absorption spectral band, and so forth. The above-mentioned properties ensure that 2D materials hold great promise for various high-performance infrared (IR) applications, such as night vision, remote sensing, surveillance, target acquisition, optical communication, etc. Thus, it is of great significance to acquire better insight into IR applications based on 2D materials. In this review, we summarize the recent progress of 2D materials in IR light emission device applications. First, we introduce the background and motivation of the review, then the 2D materials suitable for IR light emission are presented, followed by a comprehensive review of 2D-material-based spontaneous emission and laser applications. Finally, further development directions and challenges are summarized. We believe that milestone investigations of 2D-material-based IR light emission applications will emerge soon, which are beneficial for 2D-material-based nano-device commercialization.

CRISPR-Cas12a-Empowered Electrochemical Biosensor for Rapid and Ultrasensitive Detection of SARS-CoV-2 Delta Variant.

Coronavirus disease 2019 (COVID-19) is a highly contagious disease caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The gold standard method for the diagnosis of SARS-CoV-2 depends on quantitative reverse transcription-polymerase chain reaction till now, which is time-consuming and requires expensive instrumentation, and the confirmation of variants relies on further sequencing techniques. Herein, we first proposed a robust technique-methodology of electrochemical CRISPR sensing with the advantages of rapid, highly sensitivity and specificity for the detection of SARS-CoV-2 variant. To enhance the sensing capability, gold electrodes are uniformly decorated with electro-deposited gold nanoparticles. Using DNA template identical to SARS-CoV-2 Delta spike gene sequence as model, our biosensor exhibits excellent analytical detection limit (50 fM) and high linearity (R2 = 0.987) over six orders of magnitude dynamic range from 100 fM to 10 nM without any nucleic-acid-amplification assays. The detection can be completed within 1 h with high stability and specificity which benefits from the CRISPR-Cas system. Furthermore, based on the wireless micro-electrochemical platform, the proposed biosensor reveals promising application ability in point-of-care testing.