Blood Vessel Detection Algorithm for Tissue Engineering and Quantitative Histology.

Immunohistochemistry for vascular network analysis plays a fundamental role in basic science, translational research and clinical practice. However, identifying vascularization in histological tissue images is time consuming and markedly depends on the operator's experience. In this study, we present "blood vessel detection-BVD", an automatic algorithm for quantitative analysis of blood vessels in immunohistochemical images. BVD is based on extraction and analysis of low-level image features and spatial filtering techniques, which do not require a training phase. BVD algorithm performance was comparatively evaluated on histological sections from three different in vivo experiments. Collectively, 173 independent images were analyzed, and the algorithm's results were compared to those obtained by human operators. The developed BVD algorithm proved to be a robust and versatile tool, being able to quantify number, area, and spatial distribution of blood vessels within all three considered histologic datasets. BVD is provided as an open-source application working on different operating systems. BVD is supported by a user-friendly graphical interface designed to facilitate large-scale analysis.

Translating Dental, Oral, and Craniofacial Regenerative Medicine Innovations to the Clinic through Interdisciplinary Commercial Translation Architecture.

Few university-based regenerative medicine innovations in the dental, oral, and craniofacial (DOC) space have been commercialized and affected clinical practice in the United States. An analysis of the commercial translation literature and National Institute for Dental and Craniofacial Research's (NIDCR's) portfolio identified barriers to commercial translation of university-based DOC innovations. To overcome these barriers, the NIDCR established the Dental Oral Craniofacial Tissue Regeneration Consortium. We provide generalized strategies to inform readers how to bridge the "valley of death" and more effectively translate DOC technologies from the research laboratory or early stage company environment to clinical trials and bring needed innovations to the clinic. Three valleys of death are covered: 1) from basic science to translational development, 2) from translational technology validation to new company formation (or licensing to an existing company), and 3) from new company formation to scaling toward commercialization. An adapted phase-gate model is presented to inform DOC regenerative medicine teams how to involve regulatory, manufacturability, intellectual property, competitive assessments, business models, and commercially oriented funding mechanisms earlier in the translational development process. An Industrial Partners Program describes how to conduct market assessments, industry maps, business development processes, and industry relationship management methods to sustain commercial translation through the later-stage valley of death. Paramount to successfully implementing these methods is the coordination and collaboration of interdisciplinary teams around specific commercial translation goals and objectives. We also provide several case studies for translational projects with an emphasis on how they addressed DOC biomaterials for tissue regeneration within a rigorous commercial translation development environment. These generalized strategies and methods support innovations within a university-based and early stage company-based translational development process, traversing the many funding gaps in dental, oral, and craniofacial regenerative medicine innovations. Although the focus is on shepherding technologies through the US Food and Drug Administration, the approaches are applicable worldwide.

Scanning Magnetic Microscope Using a Gradiometric Configuration for Characterization of Rock Samples.

Scanning magnetic microscopy is a tool that has been used to map magnetic fields with good spatial resolution and field sensitivity. This technology has great advantages over other instruments; for example, its operation does not require cryogenic technology, which reduces its operational cost and complexity. Here, we presented a spatial domain technique based on an equivalent layer approach for processing the data set produced by magnetic microscopy. This approach estimated a magnetic moment distribution over a fictitious layer composed by a set of dipoles located below the observation plane. For this purpose, we formulated a linear inverse problem for calculating the magnetic vector and its amplitude. Vector field maps are valuable tools for the magnetic interpretation of samples with a high spatial variability of magnetization. These maps could provide comprehensive information regarding the spatial distribution of magnetic carriers. In addition, this approach might be useful for characterizing isolated areas over samples or investigating the spatial magnetization distribution of bulk samples at the micro and millimeter scales. This technique could be useful for many applications that require samples that need to be mapped without a magnetic field at room temperature, including rock magnetism.

Modulating smooth muscle cell response by the release of TGFß2 from tubular scaffolds for vascular tissue engineering.

Tissue engineering has gained considerable attention in the development of small diameter tissue engineered vascular grafts (TEVGs) for treating coronary heart disease. A properly designed acellular and biodegradable TEVG must encourage the infiltration and growth of vascular smooth muscle cells (SMCs). Our group has previously shown that increasing levels of TGFß2 can differentially modulate SMC migration and proliferation. In this study, tubular electrospun scaffolds loaded with TGFß2 were fabricated using various ratios of gelatin/polycaprolactone (PCL), resulting in scaffolds with porous nano-woven architecture suitable for tissue ingrowth. Scaffold morphology, degradation rate, TGß2 release kinetics, and bioactivity were assessed. TGFß2 was successfully integrated into the electrospun biomaterial that resulted in a differential release profile depending on the gelatin/PCL ratio over the course of 42 days. Higher TGFß2 elution was obtained in scaffolds with higher gelatin content, which may be related to the biodegradation of gelatin in culture media. The biological activity of the released TGFß2 was evaluated by its ability to affect SMC proliferation as a function of its concentration. SMCs seeded on TGFß2-loaded scaffolds also showed higher densities and infiltration after 5 days in culture as compared to scaffolds without TGFß2. Our results demonstrate that the ratio of synthetic and natural polymers in electrospun blends can be used to tune the release of TGFß2. This method can be used to intelligently modulate the SMC response in gelatin/PCL scaffolds making the TGFß2-loaded conduits attractive for cardiovascular tissue engineering applications.

Carbonic anhydrase immobilized on hollow fiber membranes using glutaraldehyde activated chitosan for artificial lung applications.

Extracorporeal CO2 removal from circulating blood is a promising therapeutic modality for the treatment of acute respiratory failure. The enzyme carbonic anhydrase accelerates CO2 removal within gas exchange devices by locally catalyzing HCO3 (-) into gaseous CO2 within the blood. In this work, we covalently immobilized carbonic anhydrase on the surface of polypropylene hollow fiber membranes using glutaraldehyde activated chitosan tethering to amplify the density of reactive amine functional groups for enzyme immobilization. XPS and a colorimetric amine assay confirmed higher amine densities on the chitosan coated fiber compared to control fiber. Chitosan/CA coated fibers exhibited accelerated CO2 removal in scaled-down gas exchange devices in buffer and blood (115% enhancement vs. control, 37% enhancement vs. control, respectively). Carbonic anhydrase immobilized directly on hollow fiber membranes without chitosan tethering resulted in no enhancement in CO2 removal. Additionally, fibers coated with chitosan/carbonic anhydrase demonstrated reduced platelet adhesion when exposed to blood compared to control and heparin coated fibers.

Residual feed intake, body composition, and fertility in yearling beef heifers.

One hundred thirty-seven spring-born yearling beef heifers of British breed types were used to determine the relationships between residual feed intake (RFI) and growth rate, body composition, mature size, and fertility. Heifers were housed in a dry lot facility during the experimental period, and data were collected over a 2-yr period (yr 1, n = 67; yr 2, n = 70). Individual feed intake, BW, BCS, hip height, and ultrasonic measurements [subcutaneous rib fat (UBF), rump fat (URF), LM area (LMA), and intramuscular fat (IMF)] of body composition were recorded. Individual feed intakes (kg of TDN consumed/d) were used to calculate RFI combining both years of data. Heifers averaged 387.0 ± 19.4 d of age and 337.1 ± 29.9 kg of BW at initiation of the experiment. Mean ADG was 1.14 ± 0.21 kg/d during the trial. Based on RFI, with year of test and farm of origin included in the model as covariates, heifers were classified into groups: positive (POS; 0.74 kg of TDN/d) or negative (NEG; -0.73 kg TDN/d) for first analysis and high (HI), medium (MED), or low (LO; mean RFI = 1.06, -0.01, and -1.13 kg of TDN/d, respectively) subsequently. An initial phenotypic relationship (P < 0.05) between RFI and both UBF and URF (r = 0.19 and 0.17, respectively) was sustained (P < 0.01) with UBF (r = 0.27) and URF (r = 0.24) to trial conclusion. No other correlations with RFI were significant. Heifers classified as POS reached puberty earlier than those classified as NEG (414 ± 3.83 vs. 427 ± 4.67 d of age, P = 0.03), and possessed greater LMA per 100 kg of BW (LMACWT) at conclusion of the trial (P < 0.01). Medium heifers exhibited less URF (P < 0.05) compared with either HI or LO heifers at trial initiation. Low heifers possessed less LM area (cm(2)) per 100 kg of BW (P < 0.05) than HI but did not differ (P > 0.10) from MED heifers at either the beginning or the end of test. Additionally, a negative linear relationship was observed between RFI and age at puberty (P < 0.05). Each 1-unit increase in RFI corresponded to a decrease of 7.5 d in age at puberty, but did not affect pregnancy or conception rates (P > 0.10). Differences in body fat and rate of metabolism associated with RFI could delay reproductive maturity.

Influence of serotonin-transporter-linked promoter region polymorphism on platelet activation in geriatric depression.

OBJECTIVE: Depression has been associated with increased platelet activation. Variations in the serotonin-transporter-linked promoter region (5-HTTLPR) polymorphism may influence the degree of activation. The authors examined the association among depression, platelet activation, and 5-HTTLPR genotype. METHOD: Elderly subjects with (N=61) and without (N=12) major depression were assessed for cognitive impairment, cardiovascular disease, and two indices of platelet activation. The depressed subjects were genotyped for the 5-HTTLPR polymorphism. RESULTS: The depressed subjects were older, were more cognitively impaired, and had higher platelet factor 4 and beta-thromboglobulin levels; cardiovascular disease was minimal in both groups. In the depressed group, subjects with the 5-HTTLPR l/l genotype had significantly higher platelet factor 4 and beta-thromboglobulin levels. CONCLUSIONS: Platelet activation is increased in elderly depressed patients, especially those with the 5-HTTLPR l/l genotype. This finding suggests how genetic differences may influence cardiovascular mortality in depressed patients with ischemic heart disease.

Effect of the previously gravid uterine horn and postpartum interval on follicular diameter and conception rate in beef cows treated with estradiol benzoate and progesterone.

An experiment was performed to evaluate the effect of the side of ovulation with respect to the previously gravid uterine horn on fertility of cows inseminated at one of two periods postpartum. All cows were treated with an intravaginal progesterone insert for 7 d and received estradiol benzoate (2 mg, i.m.) at the time of device insertion, prostaglandin F2alpha (25 mg, i.m.) at the time of device removal, and estradiol benzoate (1 mg, i.m.) 30 h after device removal. All cows were inseminated 28 to 30 h after the second treatment with estradiol benzoate, regardless of observed estrus. Cows treated in Period 1 received inserts at 16 to 20 d postpartum and were inseminated at 25 to 29 d postpartum. Cows treated in Period 2 received inserts at 26 to 30 d postpartum and were inseminated at 35 to 39 d postpartum. Diameter of the largest follicle at insert removal was greater in cows treated in Period 2 (10.1 +/- 0.3; mm +/- SEM) than in cows treated in Period 1 (9.1 +/- 0.3; P < .05). Diameter did not differ with the side of ovulation in respect to the previously gravid uterine horn. Diameter was greater in cows 5 to 9 (10.3 +/- 0.3) than in cows 3 to 4 (9.0 +/- 0.3) or 10 to 13 (9.4 +/- 0.6) yr of age (P < .01). The proportion of cows that ovulated from the ovary contralateral to the previously gravid uterine horn was greater (P < .05) than of those that ovulated from the ipsilateral ovary, and the incidence of ovulation was reduced in cows 3 to 4 yr of age (P < .01). Conception rate tended to be greater for ovulation from the ipsilateral compared with the contralateral ovary, relative to the previously gravid uterine horn (P < .10) and for ovulation from the right than the left ovary (P < .06). Conception rate was less if cows ovulated a follicle that was < 9 mm than a follicle > or = 9 mm in diameter at insert removal (P < .01) and was greater in cows inseminated in June than in April or May (P < .05). In conclusion, in cows in which estrus was synchronized at 25 to 39 d postpartum, ovulation from either the ovary ipsilateral to the previously gravid uterine horn, or the right ovary, tended to increase fertility.

Treatment of rat pancreatic islets with reactive PEG.

Covalent attachment of polymers to cells and tissues could be used to solve a variety of problems associated with cellular therapies. Insulin-dependent diabetes mellitus is a disease resulting from the autoimmune destruction of the beta cells of the islets of Langerhans in the pancreas. Transplantation of islets into diabetic patients would be an attractive form of treatment, provided that the islets could be protected from the host's immune system in order to prevent graft rejection. If reaction of polyethylene glycol (PEG) segments with the islet surface did not damage function, the immunogenicity and cell binding characteristics of the islet could be altered. To determine if this process damages islets, rat islets have been isolated and treated with protein-reactive PEG-isocyanate (MW 5000) under mild reaction conditions. An assessment of cell viability using a colorimetric mitochondrial activity assay showed that treatment of the islets with PEG-isocyanate did not reduce cell viability. Insulin release in response to secretagogue challenge was used to evaluate islet function after treatment with the polymer. The insulin response of the PEG-treated islets was not significantly different than untreated islets in a static incubation secretagogue challenge. In addition, PEG-isocyanate-treated islets responded in the same manner as untreated islets in a glucose perifusion assay. Finally, the presence of PEG on the surface of the islets after treatment with the amine-reactive N-hydroxysuccinimide-PEG-biotin (not PEG-isocyanate) was confirmed by indirect fluorescence staining. These results demonstrate the feasibility of treating pancreatic islets with reactive polymeric segments and provide the foundation for further investigation of this novel means of potential immunoisolation.

Cocaine activates platelets and increases the formation of circulating platelet containing microaggregates in humans.

OBJECTIVE: To determine whether there is evidence of platelet activation following in vivo cocaine administration in humans, as cocaine abuse is associated with myocardial infarction and stroke, and platelet activation leading to thrombosis is a possible mechanism. SETTING: University hospital. DESIGN AND SUBJECTS: Following a randomised, double blind crossover design, 14 healthy volunteers were studied twice, receiving cocaine (2 mg/kg intranasally) once and placebo once. Flow cytometric analysis of P-selectin expression (an alpha granule membrane protein found on the surface of activated platelets), quantification of the platelet specific proteins platelet factor 4 and beta thromboglobulin, and measurement of platelet containing microaggregate and platelet microparticle (fragment) formation were used to assess platelet activation. Circulating von Willebrand factor antigen (vWF) was measured to evaluate a possible role of endothelial stimulation concurrent with platelet activation. RESULTS: There was an increase in both platelet factor 4 (mean (SD), 16 (7) to 39 (22) IU/ml, p = 0. 04) and beta thromboglobulin (70 (20) to 98 (26) IU/ml, p < 0.01) at 120 minutes following cocaine administration. Platelet containing microaggregate formation was increased at 40 minutes (from 47 (3.2)% to 54 (2.0)%, p < 0.001) and 80 minutes (55 (2.5)%, p = 0.04). Bleeding time decreased following cocaine from 10 (1) to 9 (1) minutes (p = 0.07). No changes in any of the measured variables were noted following placebo administration. CONCLUSIONS: Cocaine exposure causes platelet activation, alpha granule release, and platelet containing microaggregate formation. These data support the view that cocaine, even at the relatively low doses commonly self administered by occasional abusers, may promote thrombosis and predispose healthy individuals to ischaemic events. Platelet inhibitors should be considered early in any patient with suspected cocaine related ischaemia.

Evaluation of platelet activation in depressed patients with ischemic heart disease after paroxetine or nortriptyline treatment.

This study investigated the effects of antidepressant treatment on platelet activation in depressed patients with ischemic heart disease (IHD). Plasma levels of platelet alpha-granule release products beta-thromboglobulin (BTG) and platelet factor 4 (PF4) were measured in 17 depressed patients with IHD who were treated in a 6-week, double-blind trial with either paroxetine (10 patients) or nortriptyline (7 patients). Baseline measurements of BTG and PF4 were significantly elevated in both drug treatment groups before the initiation of antidepressant therapy compared with those of healthy control subjects. In the paroxetine group, mean PF4 and BTG levels significantly decreased from these elevated baseline values within 1 week of treatment and remained low at 3- and 6-week measurements. In contrast, the nortriptyline group did not exhibit a significant decrease in PF4 or BTG plasma levels after 1, 3, or 6 weeks of treatment. Therefore, platelet activation in depressed patients with IHD seems to be inhibited by the selective serotonin reuptake inhibitor paroxetine. The effect of paroxetine on PF4 and BTG plasma levels suggests that it may reduce platelet aggregation in vivo and may positively impact IHD-related mortality in this population.

Modeling flow effects on thrombotic deposition in a membrane oxygenator.

The hypothesis that regions of low blood velocity in a membrane oxygenator, as predicted by computational fluid dynamics (CFD), would correspond with regions of clinical thrombotic deposition was investigated. Twenty heparin-coated oxygenators were sectioned following use in adult extracorporeal membrane oxygenation. The activated clotting time (ACT) was maintained at approximately 180 s via heparin infusion throughout the support period. Cross-sections were systematically photographed, and slides made to allow image projection upon a digitizing pad. Thrombotic deposition was traced to allow creation of a device cross-section image with an overlaid color scale representing thrombotic deposition frequency. A two-dimensional CFD model was developed to predict blood velocities throughout the oxygenator cross-section. Direct spatial comparisons were made between maps of CFD modeled blood speed and thrombotic deposition. Theoretical oxygenator design modification was performed within the CFD model to investigate flow paths which might minimize regions of low blood velocity. CFD results demonstrated that low velocity regions qualitatively matched regions with a high incidence of thrombotic deposition. Thrombotic deposition was also correlated to longer perfusion periods. This technique of coupling clinical data and CFD offers the potential to relate flow characteristics to thrombotic deposition and represents a potentially powerful new methodology for the optimization of oxygenator flow-related biocompatibility.

Blood biocompatibility analysis in the setting of ventricular assist devices.

Ventricular assist devices (VADs) are increasingly applied to support patients with advanced cardiac failure. While the benefit of VADs in supporting this patient group is clear, substantial morbidity and mortality occur during the VAD implant period due to thromboembolic and infective complications. Efforts at the University of Pittsburgh aimed at evaluating the blood biocompatibility of VADs in the clinical, animal, and in vitro setting over the past decade are summarized. Emphasis is placed on understanding the mechanisms of thrombosis and thromboembolism associated with these devices.

Assessing acute platelet adhesion on opaque metallic and polymeric biomaterials with fiber optic microscopy.

The degree of platelet adhesion and subsequent thrombus formation is an important measure of biocompatibility for cardiovascular biomaterials. Traditional methods of quantifying platelet adhesion often are limited by the need for direct optical access, limited spatial resolution, or the lack of temporal resolution. We have developed a new imaging system that utilizes fiber optics and fluorescence microscopy for the quantification of platelet adhesion. This fiber optic remote microscope is capable of imaging individual fluorescently labeled platelets in whole blood on opaque surfaces. Using this method, platelet adhesion was quantified on a series of metallic [low-temperature isotropic carbon (LTIC); titanium alloy (Ti); diamond-like carbon (DLC); oxidized titanium alloy (TiO); and polycrystalline diamond (PCD)] and polymeric [woven Dacron (WD)] collagen-impregnated Dacron (HEM), expanded polytetrafluoroethylene (ePTFE), and denucleated ePTFE (dePTFE)] biomaterials designed for use in cardiovascular applications. These materials were perfused with heparinized whole human blood in an in vitro parallel plate flow chamber. Platelet adhesion after 5 min of perfusion ranged from 3.7 +/- 1.0 (dePTFE) to 16.8 +/- 1.5 (WD) platelets/1000 micrometer. The temporal information revealed by these studies provides a comparative measure of the acute thrombogenicity of these materials as well as some insight into their long-term hemocompatibilities. Also studied here were the effects of wall shear rate and axial position on platelet adhesion. A predicted increase in platelet adhesion with increased wall shear rate and a trend toward a decrease in platelet adhesion with increased axial distance was observed with the fiber optic microscope. Future applications for this imaging technique may include the long-term evaluation of thrombosis in blood-contacting devices in vitro and, in animal models, in vivo.

Measurement of hemostatic indexes in conjunction with transcranial doppler sonography in patients with ventricular assist devices.

BACKGROUND AND PURPOSE: Clinical thromboembolism (TE) remains an impediment to the chronic application of ventricular assist devices (VADs). Microembolic signals (MES) have been detected by transcranial Doppler ultrasound (TCD) in patients with VADs, although their origin and relation to TE remain undefined. We have investigated the hypothesis that hemostatic alterations are related to MES and that MES are associated with TE in a group of 27 VAD patients. METHODS: Indexes of coagulation, fibrinolysis, and cellular activation and aggregation were measured before and during the VAD implantation period in conjunction with TCD. Groups were defined on the basis of presence of MES, degree of MES showering, and incidence of TE. RESULTS: MES were observed in 67 (58%) of 115 of individual postoperative TCD measurements and in 21 (78%) of 27 patients. Of patients with TE, 10 (83%) of 12 had detectable MES compared with 11 (73%) of 15 patients without TE (P=0.66). MES were significantly associated with elevated thrombin generation during the implantation period, as reflected by plasma prothrombin fragment F1.2. Elevations in indexes of coagulation, platelet activation, and fibrinolysis relative to normal control subjects were found for patients with VADs with and without detected MES. CONCLUSIONS: Although no significant relation between MES and TE in VAD patients was found, the data support the hypothesis that MES are related to increased hemostatic activity in this patient group despite aggressive anticoagulant therapy.

Effects of long-term estrogen implants in beef heifers.

Crossbred beef heifers (n = 78) were assigned randomly to one of three treatments. Heifers received either no implant, one estradiol-releasing implant (Compudose), or two estradiol-releasing implants. Heifers were implanted at birth and then reimplanted every 150 d. Calves were maintained with the cows until weaning at approximately 200 d of age. Heifers were placed in the feedlot as one group and fed a growing diet for 56 d. Following the growing phase, heifers were segregated into their respective treatment groups and fed until selected by industry buyers for harvest. Beginning at 1 yr of age and continuing every 14 d until puberty or harvest, heifers were palpated per rectum, and blood samples were collected for determination of ovarian activity and attainment of puberty. Serum progesterone of > or =1 ng/mL and(or) palpation of a detectable corpus luteum were criteria of puberty. At weaning and again at harvest, an x-ray was taken of the left front leg of six heifers selected randomly from each group. Metacarpal bones III and IV from the same animals were collected at harvest and transected for determination of epiphyseal plate closure. The x-ray scores and the actual measurements had a correlation of .94. Epiphyseal plate closure occurred in a dose-related manner, with heifers on the higher dose of estrogen having earlier plate closure than heifers on the lower dose. At harvest, reproductive tissues and carcass data were collected for all heifers. Eighteen of 25 untreated control heifers (P < .05), 6 of 26 heifers treated with one implant, and 2 of 26 heifers treated with two implants attained puberty by the end of the experiment. No differences (P > .10) were detected among treatment groups for carcass traits. These data suggest that early and continuous treatment of heifers with estradiol implants can retard reproductive function.

Directions in cardiovascular tissue engineering.

The generation of tissue replacements or supplements for diseased tissue within the cardiovascular system has been the target of recent tissue engineering efforts. While clinically applicable methodologies remain to be achieved, important foundational experimentation has been performed in recent years to begin the move toward engineered tissue replacement therapy. Inadequacies of current valve, vessel, and other heart prostheses are reviewed briefly, followed by the discussion of selected progress in the supplementation or replacement of each cardiovascular component with tissue constructs. Topics addressed include the endothelialization of bio-prosthetic valves and synthetic vascular grafts, the generation of tissue valve leaflets and vascular conduits, the genetic manipulation of endothelial cells with implications for graft endothelialization, and cardiomyoplasty achieved through cellular and genetic means.

In vitro stability of a highly crystalline hydroxylapatite coating in a saturated citric acid solution.

A novel pressurized hydrothermal post-plasma-spray process has been developed to convert the crystalline non-HA and amorphous components of plasma-sprayed hydroxylapatite coatings back into crystalline HA. The process, known commercially as MP-1, was used to produce coatings comprising approximately 96% crystalline HA. The in vitro solubility of the coating in saturated citric acid solution has been measured to simulate the effect of implant detoxification procedures, which use citric acid as a cleaning medium. The MP-1 coating solubility in saturated citric acid solution (pH = 1) was compared to that of coatings with crystalline HA contents ranging from 37.5-82%. All coatings showed an initial sharp rise in coating dissolution, which correlated with crystalline HA content, followed by a steady state dissolution rate. After 60 s at 25 degrees C, the MP-1 coating showed a 65% decrease in solubility compared to a highly amorphous coating (AM-2). All coatings showed very similar steady state dissolution rates, except for AM-2, which was significantly higher. SEM analysis showed that the AM-2 coating surface was degraded substantially more than the other coatings, resulting in partial coating exfoliation. A mechanism of coating dissolution is proposed, in which the initial rapid leaching of soluble phases from the coating leaves behind a porous layer of highly crystalline HA at the coating surface. The stability of this porous crystalline layer leads to steady state, diffusion-limited dissolution of the remainder of the coating. The observed two-regime dissolution profile can be accurately represented by a 2-parameter model, which predicts the initial sharp rise in coating dissolution followed by a slower, steady state loss in coating mass. Model parameters were determined from experimental solubility data, and were shown to correlate with the percentage of crystalline HA in the coatings. The present data suggest that the treated coating is significantly more resistant to degradation from aggressive detoxification procedures such as citric acid burnishing.

Highly crystalline MP-1 hydroxylapatite coating. Part I: In vitro characterization and comparison to other plasma-sprayed hydroxylapatite coatings.

A novel pressurized hydrothermal post-plasma-spray process, referred to as MP-1, has been developed to convert the crystalline non-HA and amorphous components of plasma-sprayed hydroxylapatite coating back into crystalline HA. No detrimental effects are observed on the strength of either the base metal or the coating. X-ray diffraction (XRD) and FTIR analysis, surface roughness, shear adhesion strength and calcium solubility testing were conducted on Calcitite coated samples before and after treatment with this process. Other commercially available coatings were also studied using XRD and solubility testing. Quantitative XRD data show that the MP-1 treatment increases the average crystalline HA content of the Calcitite coating from 77% to 96%, while the amorphous content decreases from 21% to 4%. Other commercially available dental implant coatings ranged in crystalline HA content from 45% to 73%, with amorphous phase content ranging from 29% to 62%. FTIR spectra for treated coatings were significantly more well defined, and showed an increase in peak separation and intensity. Surface roughness and shear adhesion strength were not affected by the treatment. In vitro solubility testing revealed that for all coatings there is an initial introduction of calcium into solution over the first 2 h of testing; however, the amount of calcium dissolved was significantly lower for the MP-1 coating. Under a pH and temperature representative of normal physiologic conditions, the rate of calcium dissolution for the MP-1 coating was significantly lower than that of the other commercial HA coatings. In increasingly acidic conditions, the MP-1 coating was compared to the Calcitite coating and was found to have a significantly slower rate of calcium release. The MP-1 treatment enhances typical HA coatings by increasing the crystalline HA content at the expense of the plasma-spray-induced soluble phases without a reduction in the strength of the coating. The resulting coatings exhibit significantly decreased in vitro solubility over a wide range of pH. The results of this solubility testing suggest that the treated coating may show significantly enhanced in vivo stability, even under the extreme conditions encountered during periods of infection or rigorous detoxification procedures. The significant differences between plasma-sprayed HA coatings reported here underscore the need for industry and academic researchers to raise the level of discourse and understanding of HA coatings. By offering consistent and accurate descriptions of coating compositions and methods of analysis, meaningful comparisons between different HA coatings can be made.