Degradation mechanism of benzodithiophene-based conjugated polymers when exposed to light in air.

We report the investigation of the air photostability of benzo[1,2-b:4,5-b']dithiophene (BDT) based conjugated polymers using UV-visible spectroscopy, X-ray photoelectron spectroscopy, gel permeation chromatography, and nuclear magnetic resonance spectroscopy. Three low band gap alternating D-A copolymers consisting of 3-fluoro-2-heptylcarbonylthieno[3,4-b]thiophene and alkyl-substituted BDT, alkoxy-substituted BDT, or dithienosilole, respectively, were prepared for investigating their photovoltaic performance and photostability. After only two hours of simultaneous exposure to light and air, the main absorption peak of the polymer films containing BDT units blue-shifted and its intensity dramatically decreased. We demonstrated that the BDT unit underwent dramatic structural change under illumination in air by reacting with the oxygen molecules at the excited state, leading to the disruption of the main-chain conjugation of the polymer. As a result, the color of the alkyl-BDT based polymer film permanently changed from deep blue to light yellow. In contrast, the dithienosilole based polymer was quite stable when treated under the same condition with negligible change in the absorption spectrum.

Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b:2',3'-d]silole copolymer with a power conversion efficiency of 7.3%.

A new alternating copolymer of dithienosilole and thienopyrrole-4,6-dione (PDTSTPD) possesses both a low optical bandgap (1.73 eV) and a deep highest occupied molecular orbital energy level (5.57 eV). The introduction of branched alkyl chains to the dithienosilole unit was found to be critical for the improvement of the polymer solubility. When blended with PC(71)BM, PDTSTPD exhibited a power conversion efficiency of 7.3% on the photovoltaic devices with an active area of 1 cm(2).

Syntheses, phase behavior, supramolecular chirality, and field-effect carrier mobility of asymmetrically end-capped mesogenic oligothiophenes.

A novel series of asymmetrically end-capped mesogenic oligothiophenes, with various oligothiophene core lengths, alkoxy tail lengths, and molecular polarities through introducing alkylsulfanyl or alkylsulfonyl functionalities as the terminal group, have been synthesized by palladium-catalyzed Suzuki cross-coupling and Kumada cross-coupling reactions as key steps. For the single end-capped oligothiophenes, C(m)O-Ar-OT(4)-H in which m=10, 12, 14, 16, and 18, all of these oligomers exhibited a broad temperature range of highly ordered smectic E and enantiotropic nematic phases, apart from the one with the longest octadecyloxy tail. For the double end-capped series C(10)O-Ar-OT(n)-R, R=Ph-SC(6) or Ph-SO(2)C(6) in which n=1, 2, 3, and 4, oligomers with more than one thiophene ring exhibited smectic A and smectic C phases, various crystal polymorphs and/or unusual low-temperature condensed phases. In the nonpolar, alkylsulfanylphenyl-substituted oligothiophene series, both the crystal/solid melting point and mesogenic clear point increased significantly with an increasing oligothiophene conjugation length. In the polar, alkylsulfonylphenyl-substituted oligothiophene series, all the oligomers showed increased melting points, but decreased mesogenic temperature intervals than those of their corresponding alkylsulfanyl counterparts. Remarkably, two different helical structures showing distinct striated textures or striped patterns were observed with a pitch of several to tens of micrometers under a polarized optical microscope upon cooling from their preceding fluidic smectic phases. The unusual twisted smectic layer structures in the thin solid films exhibiting distinct supramolecular chirality of both handednesses, revealed by circular dichroism measurements, were further confirmed by XRD analyses characterized by a sharp layer reflection together with its higher orders and diffuse wide-angle scatterings. In addition, initial studies showed that the highly ordered smectic phase of the single end-capped oligothiophenes can be utilized to improve field-effect charge mobility. C(10)O-Ar-OT(4)-H showed a hole mobility of 0.07 cm(2) V(-1) s(-1) when deposited on octyltrichlorosilane-treated substrates at 140 degrees C and the on/off current ratios reached 5 x 10(5); on the other hand, its mobility was only 8 x 10(-3) cm(2) V(-1) s(-1) on the same substrate when deposited at room temperature.

Toward a rational design of poly(2,7-carbazole) derivatives for solar cells.

On the basis of theoretical models and calculations, several alternating polymeric structures have been investigated to develop optimized poly(2,7-carbazole) derivatives for solar cell applications. Selected low band gap alternating copolymers have been obtained via a Suzuki coupling reaction. A good correlation between DFT theoretical calculations performed on model compounds and the experimental HOMO, LUMO, and band gap energies of the corresponding polymers has been obtained. This study reveals that the alternating copolymer HOMO energy level is mainly fixed by the carbazole moiety, whereas the LUMO energy level is mainly related to the nature of the electron-withdrawing comonomer. However, solar cell performances are not solely driven by the energy levels of the materials. Clearly, the molecular weight and the overall organization of the polymers are other important key parameters to consider when developing new polymers for solar cells. Preliminary measurements have revealed hole mobilities of about 1 x 10(-3) cm2 x V(-1) x s(-1) and a power conversion efficiency (PCE) up to 3.6%. Further improvements are anticipated through a rational design of new symmetric low band gap poly(2,7-carbazole) derivatives.

Synthesis, characterization, and application of indolo[3,2-b]carbazole semiconductors.

The synthesis, characterization, and field-effect transistor (FET) properties of new indolo[3,2-b]carbazoles are described. In particular, an extensive characterization of their crystal structures has revealed the importance of the nature of the side chains (alkyl, phenyl, thienyl substituents) on their solid-state organization. These organic materials have exhibited p-type FET behavior with hole mobilities as high as 0.2 cm2 V(-1) s(-1) with an on/off current ratio higher than 10(6). Best results were obtained with phenyl-substituted indolo[3,2-b]carbazoles since the presence of phenyl substituents seems to allow efficient overlap between the oligomeric molecules. More importantly, FET properties were kept constant during several months in air.

A first principles calculations and experimental study of the ground- and excited-state properties of ladder oligo(p-aniline)s.

The molecular structure of three ladder oligo(p-aniline)s, 5,11-diethyl-6,12-dimethylindolo[3,2-b]carbazole (DIMER 2P), 14-ethyl-5,8-dihydro-diindolo[3,2-b:2',3'-h]carbazole (TRIMER 2P), and 5,8,14-triethyl-diindolo[3,2-b:2',3'-h]carbazole (TRIMER 3P) were investigated by first principles calculations at the Hartree-Fock (HF6-31G*) and density functional theory (DFTB3LYP6-31G*) levels. It is found that the agreement between theoretical and x-ray geometrical parameters is good and rather similar for both theoretical methods. The nature and the energy of the first two singlet-singlet electronic transitions have been obtained by Zerner intermediate neglect of differential overlap/spectroscopy semiempirical calculations performed on the HF6-31G* and DFTB3LYP6-31G* optimized geometries, as well as time-dependent density functional theory (TDDFT) calculations performed on the DFTB3LYP6-31G* optimized structures. For all the compounds and for all the theoretical approaches, it is observed that the S(1)<--S(0) electronic transition (pipi*) is weakly allowed and polarized along the short axis (y) of the molecule. On the other hand, the S(2)<--S(0) electronic transition of each oligomer possesses a much larger oscillator strength and is polarized along the long (x) molecular axis. It is found that TDDFT calculations provide the best overall agreement between the energies and the corresponding optical transitions obtained from the absorption bands (0-0 peaks) measured in dichloromethane as well as providing a good evaluation of the bathochromic shifts caused by the increase in the conjugation length or by the presence of extra alkyl chains on the nitrogen atoms in TRIMER 3P compared to TRIMER 2P.

Synthesis of diindolocarbazoles by Ullmann reaction: a rapid route to ladder oligo(p-aniline)s.

[structure: see text] New and facile synthesis of symmetric diindolocarbazoles was developed using the copper-catalyzed Ullmann reaction. The key step is a double-intramolecular cyclization reaction realized on N-alkyl-3,6-dibromo-2,7-bis(2'aminophenyl)carbazole derivatives which offers the desired symmetric ladder oligo(p-aniline)s. Depending upon the nature of the side- and/or end-groups, well-defined thin films and/or semiladder polymers could be obtained. These electroactive ladder oligomers may have great potential in organic electronics.

Synthesis of diindolocarbazoles by Cadogan reaction: route to ladder oligo(p-aniline)s.

Symmetric and nonsymmetric diindolocarbazoles were successfully synthesized for the first time by a Cadogan ring closure using N-alkyl-2,7-disubstituted carbazole precursors. Cyclization reaction on N-alkyl-2,7-di(2'-nitrophenyl) carbazole derivatives is not regioselective and produced a separable mixture of symmetric and nonsymmetric diindolocarbazoles. A carbazole derivative with methyl protective groups at the 1- and 8-positions was therefore used to obtain a symmetric ladder oligo(p-aniline) (compound 22). Optical and electrochemical properties of compound 22 indicate that its neutral semiconducting form is stable in air. This novel class of electroactive ladder oligomers should create new opportunities in micro- and nanoelectronics.

New chiral pi-conjugated polymers based on a (1R,2R)-diiminocyclohexane chiral unit with weak interchain pi stacking.

New chiral pi-conjugated polymers consisting of alternating conjugated segments and (1R,2R)-diiminocyclohexane units with C2 symmetry were prepared by a palladium-catalyzed coupling reaction, they exhibited very high specific optical rotations ([alpha] up to -3000 degrees) and strong Cotton effects ([theta] 10(6) deg cm2 mol-1).