Harvesting 88Zr from heavy-ion beam irradiated tungsten at the National Superconducting Cyclotron Laboratory.

Tungsten is a commonly used material at many heavy-ion beam facilities, and it often becomes activated due to interactions with a beam. Many of the activation products are useful in basic and applied sciences if they can be recovered efficiently. In order to develop the radiochemistry for harvesting group (IV) elements from irradiated tungsten, a heavy-ion beam containing 88Zr was embedded into a stack of tungsten foils at the National Superconducting Cyclotron Laboratory and a separation methodology was devised to recover the 88Zr. The foils were dissolved in 30% hydrogen peroxide, and the 88Zr was chemically purified from the tungsten matrix and from other co-implanted radionuclides (such as 85Sr and 88Y) using strong cation-exchange (AG MP-50) chromatographic resin in sulfuric acid media. The procedure provided 88Zr in approximately 60 mL 0.5 M sulfuric acid with no detectable radio-impurities. The overall recovery yield for 88Zr was (92.3 ± 1.2)%. This proof-of-concept experiment has facilitated the development of methodologies to harvest from tungsten and tungsten-alloy parts that are regularly irradiated at heavy-ion beam facilities.

Solid-phase isotope harvesting of 88Zr from a radioactive ion beam facility.

During routine operation of the Facility for Rare Isotope Beams (FRIB), radionuclides will accumulate in both the aqueous beam dump and along the beamline in the process of beam purification. These byproduct radionuclides, many of which are far from stability, can be collected and purified for use in other scientific applications in a process called isotope harvesting. In this work, the viability of 88Zr harvesting from solid components was investigated at the National Superconducting Cyclotron Laboratory. A secondary 88Zr beam was stopped in a series of collectors comprised of Al, Cu, W, and Au foils. This work details irradiation of the collector foils and the subsequent radiochemical processing to isolate the deposited 88Zr (and its daughter 88Y) from them. Total average recovery from the Al, Cu, and Au collector foils was (91.3 ± 8.9) % for 88Zr and (95.0 ± 5.8) % for 88Y, respectively, which is over three times higher recovery than in a previous aqueous-phase harvesting experiment. The utility of solid-phase isotope harvesting to access elements such as Zr that readily hydrolyze in near-neutral pH aqueous conditions has been demonstrated for application to harvesting from solid components at FRIB.

Harvesting krypton isotopes from the off-gas of an irradiated water target to generate 76Br and 77Br.

A flowing-water target was irradiated with a 150 MeV/nucleon beam of 78Kr at the National Superconducting Cyclotron Laboratory to produce 77Kr and 76Kr. Real-time gamma-imaging measurements revealed the mass transport of the krypton radioisotopes through the target-water processing, or "isotope harvesting", system. The production rates were determined to be 2.7(1) × 10-4 nuclei of 76Kr and 1.18(6) × 10-2 nuclei of 77Kr formed per incident 78Kr ion. Utilizing an off-gas processing line as part of the isotope harvesting system, a total of 7.2(1) MBq of 76Kr and 19.1(6) MBq of 77Kr were collected in cold traps. Through the decay, the daughter radionuclides 76Br and 77Br were generated and removed from the traps with an average efficiency of 77 ± 12%. Due to the differences in half-lives of 76Kr and 77Kr, it was possible to isolate a pure sample of 76Br with 99.9% radionuclidic purity. The successful collection of krypton radioisotopes to generate 76Br and 77Br demonstrates the feasibility of gas-phase isotope harvesting from irradiated accelerator cooling-water. Larger-scale collections are planned for collecting by-product radionuclides from the Facility for Rare Isotope Beams.

Intrinsic Capacitance of Molybdenum Disulfide.

The metallic, 1T polymorph of molybdenum disulfide (MoS2) is promising for next-generation supercapacitors due to its high theoretical surface area and density which lead to high volumetric capacitance. Despite this, there are few fundamental works examining the double-layer charging mechanisms at the MoS2/electrolyte interface. This study examines the potential-dependent and frequency-dependent area-specific double-layer capacitance (Ca) of the 1T and 2H polymorphs of MoS2 in aqueous and organic electrolytes. Furthermore, we investigate restacking effects and possible intercalation-like mechanisms in multilayer films. To minimize the uncertainties associated with porous electrodes, we carry out measurements using effectively nonporous monolayers of MoS2 and contrast their behavior with reduced graphene oxide deposited layer-by-layer on atomically flat graphite single crystals using a modified, barrier-free Langmuir-Blodgett method. The metallic 1T polymorph of MoS2 (Ca,1T = 14.9 µF/cm2) is shown to have over 10-fold the capacitance of the semiconducting 2H polymorph (Ca,2H = 1.35 µF/cm2) near the open circuit potential and under negative polarization in aqueous electrolyte. However, under positive polarization the capacitance is significantly reduced and behaves similarly to the 2H polymorph. The capacitance of 1T MoS2 scales with layer number, even at high frequency, suggesting easy and rapid ion penetration between the restacked sheets. This model system allows us to determine capacitance limits for MoS2 and suggest strategies to increase the energy density of devices made from this promising material.

Impact of Encapsulation on in vitro and in vivo Performance of Volatile Nanoscale Phase-Shift Perfluorocarbon Droplets.

Phase-shift droplets can be converted by sound from low-echogenicity, liquid-core agents into highly echogenic microbubbles. Many proposed applications in imaging and therapy take advantage of the high spatiotemporal control over this dynamic transition. Although some studies have reported increased circulation time of the droplets compared with microbubbles, few have directly explored the impact of encapsulation on droplet performance. With the goal of developing nanoscale droplets with increased circulatory persistence, we first evaluate the half-life of several candidate phospholipid encapsulations in vitro at clinical frequencies. To evaluate in vivo circulatory persistence, we develop a technique to periodically measure droplet vaporization from high-frequency B-mode scans of a mouse kidney. Results show that longer acyl chain phospholipids can dramatically reduce droplet degradation, increasing median half-life in vitro to 25.6 min-a 50-fold increase over droplets formed from phospholipids commonly used for clinical microbubbles. In vivo, the best-performing droplet formulations showed a median half-life of 18.4 min, more than a 35-fold increase in circulatory half-life compared with microbubbles with the same encapsulation in vivo. These findings also point to possible refinements that may improve nanoscale phase-shift droplet performance beyond those measured here.

Predicting the electrochemical behavior of lithium nitrite in acetonitrile with quantum chemical methods.

Electrolyte stability is an essential prerequisite for the successful development of a rechargeable organic electrolyte Li-O2 battery. Lithium nitrate (LiNO3) salt was employed in our previous work because it was capable of stabilizing a solid-electrolyte interphase on the Li anode. The byproduct of this process is lithium nitrite (LiNO2), the fate of which in a Li-O2 battery is unknown. In this work, we employ density functional theory and coupled-cluster calculations combined with an implicit solvation model for neutral molecules and a mixed cluster/continuum model for single ions to understand the chemical and electrochemical behavior of LiNO2 in acetonitrile (AN). The redox potentials of oxygenated nitrogen compounds predicted in this study are in excellent agreement with the experimental results (the average accuracy is 0.10 V). Theoretical calculations suggest that the reaction between the nitrite ion and its first oxidation product, nitrogen dioxide (NO2), in AN solution proceeds via the initial formation of a trans-ONO-NO2 dimer that is subject to autoionization and the subsequent reaction of produced nitrosyl ion (NO(+)) with NO2(-). Good agreement between experimental and simulated cyclic voltammograms for electrochemical oxidation of LiNO2 in AN provides support to the proposed mechanism of coupled electrochemical and chemical reactions. The results suggest a possible mechanism of regeneration of LiNO3 in electrolyte in the presence of oxygen, which is uniquely possible under charging conditions in a Li-O2 battery.

A rechargeable Li-O2 battery using a lithium nitrate/N,N-dimethylacetamide electrolyte.

A major challenge in the development of rechargeable Li-O(2) batteries is the identification of electrolyte materials that are stable in the operating environment of the O(2) electrode. Straight-chain alkyl amides are one of the few classes of polar, aprotic solvents that resist chemical degradation in the O(2) electrode, but these solvents do not form a stable solid-electrolyte interphase (SEI) on the Li anode. The lack of a persistent SEI leads to rapid and sustained solvent decomposition in the presence of Li metal. In this work, we demonstrate for the first time successful cycling of a Li anode in the presence of the solvent, N,N-dimethylacetamide (DMA), by employing a salt, lithium nitrate (LiNO(3)), that stabilizes the SEI. A Li-O(2) cell containing this electrolyte composition is shown to cycle for more than 2000 h (>80 cycles) at a current density of 0.1 mA/cm(2) with a consistent charging profile, good capacity retention, and O(2) detected as the primary gaseous product formed during charging. The discovery of an electrolyte system that is compatible with both electrodes in a Li-O(2) cell may eliminate the need for protecting the anode with a ceramic membrane.

N-alkyldinaphthocarbazoles, azaheptacenes, for solution-processed organic field-effect transistors.

Substituted N-alkyldinaphthocarbazoles were synthesized using a key double Diels-Alder reaction. The angular nature of the dinaphthocarbazole system allows for increased stability of the conjugated system relative to linear analogues. The N-alkyldinaphthocarbazoles were characterized by UV-vis absorption and fluorescence spectroscopy as well as cyclic voltammetry. X-ray structure analysis based on synchrotron X-ray powder diffraction revealed that the N-dodecyl-substituted compound was oriented in an intimate herringbone packing motif, which allowed for p-type mobilities of 0.055 cm(2) V(-1) s(-1) from solution-processed organic field-effect transistors.

Predicting solvent stability in aprotic electrolyte Li-air batteries: nucleophilic substitution by the superoxide anion radical (O2(•-)).

There is increasing evidence that cyclic and linear carbonates, commonly used solvents in Li ion battery electrolytes, are unstable in the presence of superoxide and thus are not suitable for use in rechargeable Li-air batteries employing aprotic electrolytes. A detailed understanding of related decomposition mechanisms provides an important basis for the selection and design of stable electrolyte materials. In this article, we use density functional theory calculations with a Poisson-Boltzmann continuum solvent model to investigate the reactivity of several classes of aprotic solvents in nucleophilic substitution reactions with superoxide. We find that nucleophilic attack by O(2)(•-) at the O-alkyl carbon is a common mechanism of decomposition of organic carbonates, sulfonates, aliphatic carboxylic esters, lactones, phosphinates, phosphonates, phosphates, and sulfones. In contrast, nucleophilic reactions of O(2)(•-) with phenol esters of carboxylic acids and O-alkyl fluorinated aliphatic lactones proceed via attack at the carbonyl carbon. Chemical functionalities stable against nucleophilic substitution by superoxide include N-alkyl substituted amides, lactams, nitriles, and ethers. The results establish that solvent reactivity is strongly related to the basicity of the organic anion displaced in the reaction with superoxide. Theoretical calculations are complemented by cyclic voltammetry to study the electrochemical reversibility of the O(2)/O(2)(•-) couple containing tetrabutylammonium salt and GCMS measurements to monitor solvent stability in the presence of KO(2)(•) and a Li salt. These experimental methods provide efficient means for qualitatively screening solvent stability in Li-air batteries. A clear correlation between the computational and experimental results is established. The combination of theoretical and experimental techniques provides a powerful means for identifying and designing stable solvents for rechargeable Li-air batteries.

Ethoxycarbonyl-based organic electrode for Li-batteries.

Currently, batteries are being both considered and utilized in a variety of large-scale applications. Materials sustainability stands as a key issue for future generations of batteries. One alternative to the use of a finite supply of mined materials is the use of renewable organic materials. However, before addressing issues regarding the sustainability of a given organic electrode, fundamental questions relating to the structure-function relationships between organic components and battery performance must first be explored. Herein we report the synthesis, characterization, and device performance of an organic salt, lithium 2,6-bis(ethoxycarbonyl)-3,7-dioxo-3,7-dihydro-s-indacene-1,5-bis(olate), capable of reversibly intercalating with minimal polarization 1.8 Li per unit formula over two main voltage plateaus located at approximately 1.96 and approximately 1.67 V (vs. Li/Li(+)), leading to an overall capacity of 125 mAh/g. Proton NMR and in situ XRD analyses of battery cycling versus Li at room temperature reveal that the insertion-deinsertion process is fully reversible with the dips in the voltage-composition traces, which are associated with changes in the 3D structural packing of the electrochemically active molecules.

A low band gap conjugated polymer for supercapacitor devices.

We present the electrochemical polymerization and characterization of a stable and dopable polyindophenine derivative starting from monomer 5. The fabrication of supercapacitor devices was carried out by direct electrochemical polymerization on an ITO-coated slide. Furthermore, the galvanostatic and potentiostatic experiments conducted on these supercapacitors have shown that the polyindophenine-derivative material has very good cyclability, over a potential range of 1.4 V, and a maximum capacitance of 140 F g(-1).

Integrated diamond sapphire laser.

We use analytic expressions and simulations to examine a model laser gain element formed by integrating diamond and a solid state laser material, such as, Ti:sapphire. The gain element is designed to provide in a single composite structure the thermal management capabilities of diamond and the optical amplification of the laser material. The model results indicate low temperature and a specific radial dependence of the heat transfer coefficient at the material interfaces are needed to access the highest average powers and highest quality optical fields. We outline paths designed to increase average output power of a lowest order mode laser oscillator based on these gain elements to megawatt levels. The long term goal is economically viable solar power delivered safely from space. The short term goal is a design strategy that will facilitate "proof of principle" demonstrations using currently accessible optical pump and thermal management capabilities.