The rates of second lung cancers and the survival of surgically-resected second primary lung cancers in patients undergoing resection of an initial primary lung cancer.

BACKGROUND: The Lung Cancer Screening Trial demonstrated improved overall survival (OS) and lung cancer specific survival (LCSS), likely due to finding early-stage NSCLC. The purpose of our investigation is to evaluate whether long-term surveillance strategies (4+ years after surgical resection of the initial lung cancer(1LC)) would be beneficial in NSCLC patients by assessing the rates of second lung cancers(2LC) and the OS/LCSS in patients undergoing definitive surgery in 1LC as compared to 2LC (>48 months after 1LC) populations. METHODS: SEER13/18 database was reviewed for patients during 1998-2013. Log-rank tests were used to determine the OS/LCSS differences between the 1LC and 2LC in the entire surgical group(EG) and in those having an early-stage resectable tumors (ESR, tumors <4 cm, node negative). Joinpoint analysis was used to determine rates of second cancers 4-10 year after 1LC using SEER-9 during years 1985-2014. RESULTS: The rate of 2LCs was significantly less than all other second cancers until 2001 when the incidence of 2LCs increased sharply and became significantly greater than all other second cancers in females starting in year 2005 and in men starting in year 2010. OS/LCSS, adjusted for propensity score by using inverse probability weighting, demonstrated similar OS, but worse LCSS for 2LCs in the EG, but similar OS/LCSSs in the ESR group. CONCLUSION: Because the rate of 2LCs are increasing and because the OS/LCSS of the 1LC and 2LC are similar in early-stage lesions, we feel that continued surveillance of patients in order to find early-stage disease may be beneficial.

The high prevalence and impact of rheumatic heart disease in pregnancy in First Nations populations in a high-income setting: a prospective cohort study.

OBJECTIVE: To describe the epidemiology of rheumatic heart disease (RHD) in pregnancy in Australia and New Zealand (A&NZ). DESIGN: Prospective population-based study. SETTING: Hospital-based maternity units throughout A&NZ. POPULATION: Pregnant women with RHD with a birth outcome of ≥20 weeks of gestation between January 2013 and December 2014. METHODS: We identified eligible women using the Australasian Maternity Outcomes Surveillance System (AMOSS). De-identified antenatal, perinatal and postnatal data were collected and analysed. MAIN OUTCOME MEASURES: Prevalence of RHD in pregnancy. Perinatal morbidity and mortality. RESULTS: There were 311 pregnancies associated with women with RHD (4.3/10 000 women giving birth, 95% CI 3.9-4.8). In Australia, 78% were Aboriginal or Torres Strait Islander (60.4/10 000, 95% CI 50.7-70.0), while in New Zealand 90% were Maori or Pasifika (27.2/10 000, 95% CI 22.0-32.3). One woman (0.3%) died and one in ten was admitted to coronary or intensive care units postpartum. There were 314 births with seven stillbirths (22.3/1000 births) and two neonatal deaths (6.5/1000 births). Sixty-six (21%) live-born babies were preterm and one in three was admitted to neonatal intensive care or special care units. CONCLUSION: Rheumatic heart disease in pregnancy persists in disadvantaged First Nations populations in A&NZ. It is associated with significant cardiac and perinatal morbidity. Preconception planning and counselling and RHD screening in at-risk pregnant women are essential for good maternal and baby outcomes. TWEETABLE ABSTRACT: Rheumatic heart disease in pregnancy persists in First Nations people in Australia and New Zealand and is associated with major cardiac and perinatal morbidity.

What Is the Standard Volume to Increase a Cup Size for Breast Augmentation Surgery? A Novel Three-Dimensional Computed Tomographic Approach.

BACKGROUND: Breast augmentation surgery poses many challenges, and meeting the patient's expectations is one of the most important. Previous reports equate 100 cc to a one-cup-size increase; however, no studies have confirmed this between commercially available bras. The aim of this study was to identify the volume increase between cup sizes across different brands and the relationship with implant selection. METHODS: Five bra cup sizes from three different companies were analyzed for their volume capacity. Three methods were used to calculate the volume of the bras: (1) linear measurements; (2) volume measurement by means of water displacement; and (3) volume calculation after three-dimensional reconstruction of serial radiographic data (computed tomography). The clinical arm consisted of 79 patients who underwent breast augmentation surgery from February 1, 2014, to June 30, 2016. Answers from a short questionnaire in combination with the implant volume were analyzed. RESULTS: Across all three brands, the interval volume increase varied between sizes, but not all were above 100 cc. There was some variation in the volume capacity of the same cup size among the different brands. The average incremental increase in bra cup size across all three brands in the laboratory arm was 135 cc. The mean volume increase per cup size was 138.23 cc in the clinical arm. CONCLUSIONS: This article confirms that there is no standardization within the bra manufacturing industry. On the basis of this study, patients should be advised that 130 to 150 cc equates to a one-cup-size increase. Bras with narrower band widths need 130 cc and wider band widths require 150 cc to increase one cup size.

Analysis of the cephalometric changes in the first 3 months after spring-assisted cranioplasty for scaphocephaly.

BACKGROUND: Spring-assisted cranioplasty (SAC) has become an accepted treatment for patients with sagittal craniosynostosis; however, the early effects of springs on skull dimensions have never been assessed with objective measurements in the literature. The present study evaluated the changes in skull dimensions and intracranial volume (ICV) during the first 3 months after SAC for sagittal synostosis. METHODS: Sixteen patients with sagittal synostosis underwent SAC. The cephalic index (CI) and the distance between the spring foot plates were chronologically measured until spring removal at 3 months. Pre- and post-treatment CT scans available for 6 patients were used to assess changes in head shape. Thirteen patients underwent objective aesthetic assessment using pre- and post-operative photographs. Statistical analysis was performed using the linear mixed model for chronological data, t-test statistics for normative data comparisons and Wilcoxon's signed rank test for non-parametric data. RESULTS: For scaphocephalic patients, pre-operative and post-operative CIs were 0.70 and 0.74 (p = 0.001), respectively. Cranial widening towards normative values was observed (p = 0.0005). A continuous expansion in the distance between the spring foot plates was observed over the treatment period. Frontal and occipital angles were not affected by SAC despite apparent clinical improvements in frontal bossing and occipital prominence. CT analysis demonstrated relative reduction in the anterior cranial volume (p = 0.01) and relative expansion of the superior occipital volume (p = 0.03). CONCLUSIONS: Spring expansion was most marked in the hours following spring insertion. The expansion rate reduced to the minimum by day 1 post-operatively. Clinical benefits of SAC resulted from an increase in the bi-temporal width that camouflaged the frontal bossing. Improvement in occipital prominence was due to superior occipital volume expansion, allowing the occiput to remodel to a more rounded shape.

A novel, more efficient, staged approach for critical congenital heart disease screening.

OBJECTIVE: Screening for critical congenital heart disease (CCHD) using pulse oximetry has been endorsed by the American Academy of Pediatrics and the American Heart Association. The recommended screening requires two saturation readings. We sought to determine the incidence of undetected CCHD in Tennessee for the 2 years following implementation of an algorithm that assigned an immediate pass to a single lower extremity saturation of 97% or higher. STUDY DESIGN: State Genetic Screening records and reports of missed cases from the Tennessee Initiative for Perinatal Quality Care were used to determine if CCHD cases were missed by the new screening algorithm. RESULT: During the study, 232 infants failed the screen with 51 or 22% true positives, 13 infants had undetected CCHD (10 coarctations, 2 anomalous veins and 1 Tetralogy of Fallot). CONCLUSION: This approach eliminated over 150 000 pulse oximetry determinations in Tennessee without affecting the ability of pulse oximetry to detect CCHD before discharge.

The histological and elemental characterisation of corrosion particles from taper junctions.

OBJECTIVES: This study aimed to characterise and qualitatively grade the severity of the corrosion particles released into the hip joint following taper corrosion. METHODS: The 26 cases examined were CoC/ABG Modular (n = 13) and ASR/SROM (n = 13). Blood serum metal ion levels were collected before and after revision surgery. The haematoxylin and eosin tissue sections were graded on the presence of fibrin exudates, necrosis, inflammatory cells and corrosion products. The corrosion products were identified based on visible observation and graded on abundance. Two independent observers blinded to the clinical patient findings scored all cases. Elemental analysis was performed on corrosion products within tissue sections. X-Ray diffraction was used to identify crystalline structures present in taper debris. RESULTS: The CoC/ABG Modular patients had a mean age of 64.6 years (49.4 to 76.5) and ASR/SROM patients had a mean age of 58.2 years (33.3 to 85.6). The mean time in situ for CoC/ABG was 4.9 years (2 to 6.4) and ASR/SROM was 6.1 years (2.5 to 8.1). The blood serum metal ion concentrations reduced following revision surgery with the exception of Cr levels within CoC/ABG. The grading of tissue sections showed that the macrophage response and metal debris were significantly higher for the ASR/SROM patients (p < 0.001). The brown/red particles were significantly higher for ASR/SROM (p < 0.001). The taper debris contained traces of titanium oxide, chromium oxide and aluminium nitride. CONCLUSION: This study characterised and qualitatively graded the severity of the corrosion particles released into the hip joint from tapers that had corrosion damage.Cite this article: S. Munir, R. A. Oliver, B. Zicat, W. L. Walter, W. K. Walter, W. R. Walsh. The histological and elemental characterisation of corrosion particles from taper junctions. Bone Joint Res 2016;5:370-378. DOI: 10.1302/2046-3758.59.2000507.

Looped suture properties: implications for multistranded flexor tendon repair.

Multiple-strand repair techniques are commonly used to repair cut flexor tendons to achieve initial biomechanical strength. Looped sutures achieve multiple strands with fewer passes and less technical complexity. Their biomechanical performance in comparison with an equivalent repair using a single-stranded suture is uncertain. This study examined the mechanical properties of double-stranded loops of 3-0 and 4-0 braided polyester (Ticron) and polypropylene monofilament (Prolene). Double loops were generally less than twice the strength of a single loop. Ticron and Prolene had the same strengths, but Ticron was stiffer. The 4-0 double loops had significantly higher stiffness than 3-0 single loops. Increasing the size of sutures had a larger relative effect on strength than using a double-stranded suture. However, a double-strand loop had a larger effect on increasing stiffness than using a single suture of a larger equivalent size. Looped suture repairs should be compared with standard techniques using a thicker single suture.

A nitinol "U-Clip" versus sutured arteriovenous anastomosis: local tissue response and intimal hyperplasia development in a sheep model.

OBJECTIVES: This study sought to compare the local tissue response and subsequent volume of intimal hyperplasia (IH) that develops throughout the maturation of an arteriovenous fistula created using continuous/interrupted polypropylene with that of a novel, metal-alloy, penetrating anastomotic clip device. MATERIALS AND METHODS: Forty-six fistulae were created in 23 sheep under a paired design using the nitinol U-Clip (n = 23) in one hind limb and continuous (n = 20) or interrupted (n = 3) polypropylene suture for the other. Animals were killed at 4 (n = 3), 14 (n = 3), 28 (n = 10), 42 (n = 3), and 180 (n = 4) days. Histological sections were evaluated for quantitative histology and immunohistochemistry. RESULTS: Compared with continuous polypropylene, U-Clip specimens demonstrated less intima-media area per unit length (IMA/L), proliferating cells, and tissue necrosis at all time points (MANOVA, F = 9.8-24.1, all p ≤ .005; observed power >82%). Specifically, values of IMA/L were reduced by 5% (p = .97), 37% (p = .02), 33% (p < .01), 9% (p = .42), and 14% (p = .22) at the time points of 4, 14, 28, 42, and 180 days respectively. Proliferating cells were reduced by 75% (p < .01), 72% (p = .03), 76% (p = .03), 27% (p = .31), and 60% (p = .01) and tissue necrosis by 67% (p < .01), 58% (p = .02), 40% (p = .33), 21% (p = .43), 77% (p = .11). In a 28-day comparison between U-Clip and interrupted polypropylene the U-Clip group demonstrated a 4% (p = .65) reduction in IMA/L, 74% (p < .01) in proliferating cells and 49% (p < .05) in tissue necrosis. CONCLUSIONS: These results provide evidence of reduced local tissue necrosis, proliferating cells, and IH, favouring arteriovenous fistulae created using the U-Clip anastomotic device over conventional polypropylene suture techniques most evident over the first 4 weeks.

Tibial tuberosity transposition-advancement for lateralization of the tibial tuberosity: an ex vivo canine study.

OBJECTIVES: To evaluate the degree of lateralization achievable and strength of tibial tuberosity transposition and advancement (TTTA) relative to pin and tension band wiring (PTBW) for lateral tibial tuberosity transposition. METHODS: Six pairs of cadaveric tibiae were used. Tibial tuberosity position was determined with computed tomography (CT); bones were then randomly assigned into TTTA and PTBW groups. The PTBW group had a tibial tuberosity osteotomy and fixation with pin and tension band wiring. The TTTA group had a tibial tuberosity advancement performed with lateralization of the tibial tuberosity by 50% of cage depth, using spacers on the cranial cage screw. Postoperative CT images showed lateralization and craniocaudal deviation. Single axial distractive loading was applied to the patella at 90˚ to the tibial plateau, and peak load, energy, and stiffness were calculated. RESULTS: There were significant differences in lateralization (PTBW: 67.92 ± 5.1 %; TTTA: 88.51 ± 5.5 %) (p = 0.0173) and craniocaudal deviation (PTBW: -8.30 ± 1.4 %; TTTA: 6.83 ± 0.6) (p = 0.0001). There were no significant differences in peak load to failure (N) (PTBW: 1448 ± 121; TTTA: 1597 ± 43) (p = 0.4541), energy to failure (N/mm) (PTBW: 15013 ± 2719; TTTA: 17314 ± 887) (p = 0.646), or stiffness (N/mm)(PTBW: 102.8 ± 4.7; TTTA: 92.9 ± 4.8) (p = 0.2716). CLINICAL SIGNIFICANCE: The TTTA was more effective at lateralization of the tibial tuberosity, and of comparable strength to PTBW. Greater support of the osteotomized fragment with TTTA may resist cyclic loading, and requires evaluation.

Performance of a knotless four-strand flexor tendon repair with a unidirectional barbed suture device: a dynamic ex vivo comparison.

With increased numbers of reports using barbed sutures for tendon repairs we felt the need to design a specific tendon repair method to draw the best utility from these materials. We split 30 sheep deep flexor tendons in two groups of 15 tendons. One group was repaired with a new four-strand barbed suture repair method without knot. The other group was repaired with a conventional four-strand cross-locked cruciate repair method (Adelaide repair) with knot. Dynamic testing (3-30 N for 250 cycles) and additional static pull to failure was performed to investigate gap formation and final failure forces. The barbed suture repair group showed higher resistance to gap formation throughout the test. Additionally final failure force was higher for the barbed suture group compared with the conventional repair group. When used appropriately, barbed suture materials could be beneficial to use in tendon surgery, especially with regard to early loading of the repair site and gap formation.

Poor histological healing of a femoral fracture following 12 months of oestrogen deficiency in rats.

SUMMARY: Fractures in post-menopausal osteoporosis cause significant morbidity; however, animal models for post-menopausal fracture healing lack the effect of ageing. Therefore, we developed a model using aged animals with chronic oestrogen deficiency, which demonstrates inferior fracture repair (decreased healing histologically, bone mineral density and content and strength). This novel model may help develop molecular strategies for osteoporotic fracture repair. INTRODUCTION: The femur is susceptible to damage by both systemic conditions such as osteoporosis and locally by traumatic injury. The capacity for fracture repair decreases with age, while the risk of fracture increases. As studies of osteoporotic fracture healing in rats traditionally use a period of 3 months or less of oestrogen deficiency prior to fracturing, we aimed to establish a osteoporosis model in rats with chronic oestrogen deficiency by 12 months to better mimic human female osteoporosis. METHODS: Seventy female Sprague-Dawley rats (10 weeks old) were ovariectomised or sham operated and housed for 12 months. The right femur was fractured by way of an open osteotomy and fixed with an intramedullary Kirschner wire. Animals were sacrificed at 1, 3 and 6 weeks for radiography, dual-energy X-ray absorptiometry, tensile testing and histology. RESULTS: Bone mineral density and bone mineral content were lower by 60 and 63 %, respectively, (p < 0.05) in the bilaterally ovariectomized (OVX) groups than those in the sham groups at 6 weeks in the right fractured femurs. Maximum breaking force of the OVX group was lower than that of the sham group, with the greatest difference seen at 6 weeks following osteotomy. Histologically, the OVX groups demonstrated a delay in cellular differentiation within the fracture callus and the presence of bone resorption. The sham animals had a superior histological healing pattern with an Allen score of 4 at 6 weeks compared to a score of 1 for the OVX groups (p < 0.01). CONCLUSIONS: Long-term ovariectomy has a deleterious effect on fracture healing in a rodent model.

Performance of multinomial designs in comparison with response-based designs in non-randomized phase II trials of targeted cancer agents.

BACKGROUND: In phase II trials of cytotoxic agents, a multinomial phase II design incorporating early progression and response end points was shown to perform more efficiently than designs based only on response. We undertook a study to evaluate the performance of these designs in trials of targeted agents using the actual phase II data. PATIENTS AND METHODS: Using best response data from sequentially enrolled patients in 15 NCIC Clinical Trials Group and 7 European Organization for Research and Treatment of Cancer trials of targeted agents, we determined that trials would have been stopped at the end of stage I of accrual by applying rules generated by the multinomial and Fleming designs. Two variants of the multinomial design were studied: to stop accrual after stage I of enrolment, Variant A required either response or progression criteria to be met, whereas Variant B required that both response and progression criteria to be met. RESULTS: Using early progression, null/alternate hypotheses of 60% and 40% (60/40), the multinomial A variant recommended early stopping more often than the Fleming design. In most of the cases, this recommendation was correct given the final trial outcome. In contrast, the multinomial B variant never led to recommendations for early stopping and changing progression hypotheses did not improve the performance of this design. CONCLUSIONS: The multinomial A design using 60/40 hypotheses carried out better than the Fleming design in appropriately stopping trials of inactive targeted agents early. The multinomial B design was not useful for early stopping decisions. The multinomial A design may be favored over response-based designs in phase II trials of targeted agents.

It is not the ride: inter-hospital transport is not an independent risk factor for intraventricular hemorrhage among very low birth weight infants.

OBJECTIVE: The purpose of this study was to evaluate the relationship between intraventricular hemorrhage (IVH), inter-hospital transport and known potential risk factors for IVH. STUDY DESIGN: Very low birth weight (VLBW <1500 g) infants admitted to a large regional neonatal intensive care unit within 48 h of life from 2005 to 2010 were identified. Logistic regression and proportional odds logistic regression models were used to compare inborn versus outborn patients with respect to IVH (any vs none) and IVH grade, respectively. Logistic regression was used to quantify the association between outborn status and mortality. RESULT: A total of 758 infants were included in the study (inborn=568, outborn=190). Outborn infants were found to have greater IVH severity than inborn (odds ratio (OR): 1.52; P=0.012). After accounting for 20 clinical and demographic variables in a multivariable model, the association between outborn status and IVH lacked statistical significance (OR: 1.14; P=0.56). Significant predictors of IVH grade included vaginal delivery (OR: 2.16; P<0.001), patent ductus arteriosus (OR: 1.65; P=0.005), 5-min Apgar (OR: 0.85; P=0.005) and gestational age (OR: 0.98; P=0.012). Sixty-nine (9.1%) of the infants died. After adjusting for potential confounders, the relationship between mortality and outborn status was not significant (OR:1.26; P=0.516). Significant predictors of mortality included gestational age (OR: 1.03; P=0.04) and 5-min Apgar (OR:1.22; P=0.02). CONCLUSION: Although VLBW infants transported during the first 2 days of life have higher rates of IVH than infants born at a tertiary care facility, this relationship may be explained by associations with underlying clinical variables rather than transport itself.

Platelet function and constituents of platelet rich plasma.

Platelet Rich Plasma (PRP) therapies require blood to be processed prior to application, however, the full assessment of the output of platelet sequestration devices is lacking. In this study the products of the Autologous Fluid Concentrator (Circle BiologicsTM, Minneapolis, MN) and the Gravitational Platelet Separation System (GPS, Biomet, Warsaw, IN, USA) were evaluated in terms of platelet viability and PRP constituents. The AFC and GPS produced 6.4 (±1.0) ml and 6.3 (±0.4) ml of PRP, with platelet recovery of 46.4% (±14.7%) and 59.8% (±24.2%) producing fold increases of platelets of 4.19 (±1.62) and 5.19 (±1.62), respectively. Fibrinogen concentration was increased above baseline PPP produced with the AFC. pH was lower for both of the processed samples than for whole blood. White Blood Cell count was increased around 5 fold. Functional tests showed preserved viability with both devices. This represents essential knowledge that every treating physician should have before they can confidently administer PRP therapy produced by any method. These are the first published results of platelet function for the GPS system and the first performance results of the AFC system. The PRP produced is classified according to broad classifications as Leukocyte-PRP (L-PRP) for both devices.

Finite element micro-modelling of a human ankle bone reveals the importance of the trabecular network to mechanical performance: new methods for the generation and comparison of 3D models.

Most modelling of whole bones does not incorporate trabecular geometry and treats bone as a solid non-porous structure. Some studies have modelled trabecular networks in isolation. One study has modelled the performance of whole human bones incorporating trabeculae, although this required considerable computer resources and purpose-written code. The difference between mechanical behaviour in models that incorporate trabecular geometry and non-porous models has not been explored. The ability to easily model trabecular networks may shed light on the mechanical consequences of bone loss in osteoporosis and remodelling after implant insertion. Here we present a Finite Element Analysis (FEA) of a human ankle bone that includes trabecular network geometry. We compare results from this model with results from non-porous models and introduce protocols achievable on desktop computers using widely available softwares. Our findings show that models including trabecular geometry are considerably stiffer than non-porous whole bone models wherein the non-cortical component has the same mass as the trabecular network, suggesting inclusion of trabecular geometry is desirable. We further present new methods for the construction and analysis of 3D models permitting: (1) construction of multi-property, non-porous models wherein cortical layer thickness can be manipulated; (2) maintenance of the same triangle network for the outer cortical bone surface in both 3D reconstruction and non-porous models allowing exact replication of load and restraint cases; and (3) creation of an internal landmark point grid allowing direct comparison between 3D FE Models (FEMs).

Biomechanical assessment of a novel tendon junction.

The Pulvertaft weave has been the standard tendon junction technique used both in tendon transfers and tendon grafts. A limitation of this repair is the sequential failure of stabilizing sutures, rather than the tendon. A novel loop weave is described and compared with the Pulvertaft weave in biomechanical performance. Ovine deep flexor and extensor tendons were used to simulate Pulvertaft or loop weaves (n = 11) for tensile testing. The Pulvertaft weaves failed at the stabilizing sutures, whereas the loop weaves repairs failed by longitudinal splitting of the motor tendon. The loop weave demonstrated significantly higher mean initial failure and ultimate strengths. Tensile loads required to elongate the loop weave by 4, 6, and 8 mm were significantly higher, while more displacement was associated with the Pulvertaft repair under the application of 50, 75, and 100 N tensile loads. This study demonstrates favourable biomechanical characteristics of the new loop weave technique.

Acute rheumatic fever and rheumatic heart disease--priorities in prevention, diagnosis and management. A report of the CSANZ Indigenous Cardiovascular Health Conference, Alice Springs 2011.

Three priority areas in the prevention, diagnosis and management of acute rheumatic fever (ARF) and rheumatic heart disease (RHD) were identified and discussed in detail: 1. Echocardiography and screening/diagnosis of RHD ­ Given the existing uncertainty it remains premature to advocate for or to incorporate echocardiographic screening for RHD into Australian clinical practice. Further research is currently being undertaken to evaluate the potential for echocardiography screening. 2. Secondary prophylaxis ­ Secondary prophylaxis (long acting benzathine penicillin injections) must be seen as a priority. Systems-based approaches are necessary with a focus on the development and evaluation of primary health care-based or led strategies incorporating effective health information management systems. Better/novel systems of delivery of prophylactic medications should be investigated. 3. Management of advanced RHD ­ National centres of excellence for the diagnosis, assessment and surgical management of RHD are required. Early referral for surgical input is necessary with multidisciplinary care and team-based decision making that includes patient, family, and local health providers. There is a need for a national RHD surgical register and research strategy for the assessment, intervention and long-term outcome of surgery and other interventions for RHD.