Chiral multiferroicity in two-dimensional hybrid organic-inorganic perovskites.

Chiral multiferroics offer remarkable capabilities for controlling quantum devices at multiple levels. However, these materials are rare due to the competing requirements of long-range orders and strict symmetry constraints. In this study, we present experimental evidence that the coexistence of ferroelectric, magnetic orders, and crystallographic chirality is achievable in hybrid organic-inorganic perovskites [(R/S)-ß-methylphenethylamine]2CuCl4. By employing Landau symmetry mode analysis, we investigate the interplay between chirality and ferroic orders and propose a novel mechanism for chirality transfer in hybrid systems. This mechanism involves the coupling of non-chiral distortions, characterized by defining a pseudo-scalar quantity, ξ = p ⋅ r ( p represents the ferroelectric displacement vector and r denotes the ferro-rotational vector), which distinguishes between (R)- and (S)-chirality based on its sign. Moreover, the reversal of this descriptor's sign can be associated with coordinated transitions in ferroelectric distortions, Jahn-Teller antiferro-distortions, and Dzyaloshinskii-Moriya vectors, indicating the mediating role of crystallographic chirality in magnetoelectric correlations.

Molecularly thin, two-dimensional all-organic perovskites.

Recently, the emergence of all-organic perovskites with three-dimensional (3D) structures has expanded the potential applications of perovskite materials. However, the synthesis and utilization of all-organic perovskites in 2D form remain largely unexplored because the design principle has not been developed. We present the successful synthesis of a metal-free 2D layered perovskite, denoted as the Choi-Loh van der Waals phase (CL-v phase), with the chemical formula A2B2X4, where A represents a larger-sized cation compared to B and X denotes an anion. The CL-v phase exhibits a van der Waals gap enabled by interlayer hydrogen bonding and can be exfoliated or grown as molecularly thin 2D organic crystals. The dielectric constants of the CL-v phase range from 4.8 to 5.5 and we demonstrate their potential as gate dielectrics for thin-film transistors.

In-Plane Ferrielectric Order in van der Waals ß'-In2Se3.

van der Waals ferroic materials exhibit rich potential for implementing future generation functional devices. Among these, layered ß'-In2Se3 has fascinated researchers with its complex superlattice and domain structures. As opposed to ferroelectric α-In2Se3, the understanding of ß'-In2Se3 ferroic properties remains unclear because ferroelectric, antiferroelectric, and ferroelastic characteristics have been separately reported in this material. To develop useful applications, it is necessary to understand the microscopic structural properties and their correlation with macroscopic device characteristics. Herein, using scanning transmission electron microscopy (STEM), we observed that the arrangement of dipoles deviates from the ideal double antiparallel antiferroelectric character due to competition between antiferroelectric and ferroelectric structural ordering. By virtue of second-harmonic generation, four-dimensional STEM, and in-plane piezoresponse force microscopy, the long-range inversion-breaking symmetry, uncompensated local polarization, and net polarization domains are unambiguously verified, revealing ß'-In2Se3 as an in-plane ferrielectric layered material. Additionally, our device study reveals analogous resistive switching behaviors of different types owing to polarization switching, defect migration, and defect-induced charge trapping/detrapping processes.

Electron Spin Decoherence Dynamics in Magnetic Manganese Hybrid Organic-Inorganic Crystals: The Effect of Lattice Dimensionality.

Organic-inorganic metal hybrids with their tailorable lattice dimensionality and intrinsic spin-splitting properties are interesting material platforms for spintronic applications. While the spin decoherence process is extensively studied in lead- and tin-based hybrids, these systems generally show short spin decoherence lifetimes, and their correlation with the lattice framework is still not well-understood. Herein, we synthesized magnetic manganese hybrid single crystals of (4-fluorobenzylamine)2MnCl4, ((R)-3-fluoropyrrolidinium)MnCl3, and (pyrrolidinium)2MnCl4, which represent a change in lattice dimensionality from 2D and 1D to 0D, and studied their spin decoherence processes using continuous-wave electron spin resonance spectroscopy. All manganese hybrids exhibit nanosecond-scale spin decoherence time τ2 dominated by the symmetry-directed spin exchange interaction strengths of Mn2+-Mn2+ pairs, which is much longer than lead- and tin-based metal hybrids. In contrast to the similar temperature variation laws of τ2 in 2D and 0D structures, which first increase and gradually drop afterward, the 1D structure presents a monotonous rise of τ2 with the temperatures, indicating the strong correlation of spin decoherence with the lattice rigidity of the inorganic framework. This is also rationalized on the basis that the spin decoherence is governed by the competitive contributions from motional narrowing (prolonging the τ2) and electron-phonon coupling interaction (shortening the τ2), both of which are thermally activated, with the difference that the former is more pronounced in rigid crystalline lattices.

Near-90° Switch in the Polar Axis of Dion-Jacobson Perovskites by Halide Substitution.

Ferroelectricity in two-dimensional hybrid (2D) organic-inorganic perovskites (HOIPs) can be engineered by tuning the chemical composition of the organic or inorganic components to lower the structural symmetry and order-disorder phase change. Less efforts are made toward understanding how the direction of the polar axis is affected by the chemical structure, which directly impacts the anisotropic charge order and nonlinear optical response. To date, the reported ferroelectric 2D Dion-Jacobson (DJ) [PbI4]2- perovskites exhibit exclusively out-of-plane polarization. Here, we discover that the polar axis in ferroelectric 2D Dion-Jacobson (DJ) perovskites can be tuned from the out-of-plane (OOP) to the in-plane (IP) direction by substituting the iodide with bromide in the lead halide layer. The spatial symmetry of the nonlinear optical response in bromide and iodide DJ perovskites was probed by polarized second harmonic generation (SHG). Density functional theory calculations revealed that the switching of the polar axis, synonymous with the change in the orientation of the sum of the dipole moments (DMs) of organic cations, is caused by the conformation change of organic cations induced by halide substitution.

Strain-Driven Solid-Solid Crystal Conversion in Chiral Hybrid Pseudo-Perovskites with Paramagnetic-to-Ferromagnetic Transition.

Hybrid organic-inorganic perovskites (HOIPs) are promising stimuli-responsive materials (SPMs) owing to their molecular softness and tailorable structural dimensionality. The design of mechanically responsive HOIPs requires an in-depth understanding of how lattice strain induces intermolecular rearrangement that impacts physical properties. While chirality transfer from an organic cation to an inorganic lattice is known to influence chiral-optical properties, its effect on strain-induced phase conversion has not been explored. As opposed to achiral or racemic organic cations, chiral organic cations can potentially afford a new dimension in strain-responsive structural change. Herein, we demonstrate that mechanical strain induces a solid phase crystal conversion in chiral halide pseudo-perovskite single crystals (R/S)-(FE)2CuCl4 (FE = (4-Fluorophenyl)ethylamine) from a 0D isolated CuCl4 tetrahedral to 1D corner-sharing CuFCl5 octahedral framework via the incorporation of Cu···F interaction and N-H···F hydrogen bonding. This strain-induced crystal-to-crystal conversion involves the connection of neighboring 0D CuCl4 tetrahedra via Cu2+-Cl--Cu2+ linkages as well as the incorporation of a F-terminated organic cation as one of the X atoms in BX6 octahedra, leading to a reduced band gap and paramagnetic-to-ferromagnetic conversion. Control experiments using nonchiral or racemic perovskite analogs show the absence of such solid phase conversion. To demonstrate pressure-sensitive properties, the 0D phase is dispersed in water-soluble poly(vinyl alcohol) (PVA) polymer, which can be applied to a large-scale pressure-induced array display on fibrous Spandex substrates via a screen-printing method.

Intercalation-driven ferroelectric-to-ferroelastic conversion in a layered hybrid perovskite crystal.

Two-dimensional (2D) organic-inorganic hybrid perovskites have attracted intense interests due to their quantum well structure and tunable excitonic properties. As an alternative to the well-studied divalent metal hybrid perovskite based on Pb2+, Sn2+ and Cu2+, the trivalent metal-based (eg. Sb3+ with ns2 outer-shell electronic configuration) hybrid perovskite with the A3M2X9 formula (A = monovalent cations, M = trivalent metal, X = halide) offer intriguing possibilities for engineering ferroic properties. Here, we synthesized 2D ferroelectric hybrid perovskite (TMA)3Sb2Cl9 with measurable in-plane and out-of-plane polarization. Interestingly, (TMA)3Sb2Cl9 can be intercalated with FeCl4 ions to form a ferroelastic and piezoelectric single crystal, (TMA)4-Fe(iii)Cl4-Sb2Cl9. Density functional theory calculations were carried out to investigate the unusual mechanism of ferroelectric-ferroelastic crossover in these crystals.

The classification of 1D `perovskites'.

There has been a huge amount of interest in perovskites recently and new structures of hybrid perovskites are frequently reported. The classification of perovskites has been unambiguous in the discussion of 3D and layered 2D perovskites due to the dimensional constraints. However, in 1D perovskites, the additional degrees of freedom have resulted in a large number of possible structural configurations. The new proposed notation aims to classify these structures based on the connectivity of the octahedra of the perovskite, which has a periodic repeating pattern. However, the notation should be restricted to simple 1D perovskites and haloplumbate structures as the notation would become too cumbersome when applied to an exotic framework which has 3D characteristics, such as perovskite polytypes.

The Photophysics of Polythiophene Nanoparticles for Biological Applications.

In this work the photophysics of poly(3-hexylthiophene) nanoparticles (NPs) is investigated in the context of their biological applications. The NPs, made as colloidal suspensions in aqueous buffers, present a distinct absorption band in the low-energy region. On the basis of systematic analysis of absorption and transient absorption (TA) spectra taken under different pH conditions, this band is associated with charge-transfer states generated by the polarization of loosely bound polymer chains and originating from complexes formed with electron-withdrawing species. Importantly, the ground-state depletion of these states upon photoexcitation is active even on microsecond timescales, thus suggesting that they act as precursor states for long-living polarons; this could be beneficial for cellular stimulation. Preliminary transient absorption microscopy results for NPs internalized within the cells reveal the presence of long-living species, further substantiating their relevance in biointerfaces.

Coronary thrombi increase PTCA risk. Angioscopy as a clinical tool.

BACKGROUND: The presence of angiographically identified intracoronary thrombus has been variably associated with complications after coronary angioplasty. Angiography has been shown to be less sensitive than angioscopy for detecting subtle details of intracoronary morphology, such as intracoronary thrombi. The clinical importance of thrombi detectable by angioscopy but not by angiography is not known. METHODS AND RESULTS: Percutaneous coronary angioscopy was performed in 122 patients undergoing conventional coronary balloon angioplasty (PTCA) at six medical centers. Unstable angina was present in 95 patients (78%) and stable angina in 27 (22%). Therapy was not guided by angioscopic findings, and no patient received thrombolytic therapy as an adjunct to angioplasty. Coronary thrombi were identified in 74 target lesions (61%) by angioscopy versus only 24 (20%) by angiography. A major in-hospital complication (death, myocardial infarction, or emergency bypass surgery) occurred in 10 of 74 patients (14%) with angioscopic intracoronary thrombus, compared with only 1 of 48 patients (2%) without thrombi (P = .03). In-hospital recurrent ischemia (recurrent angina, repeat PTCA, or abrupt occlusion) occurred in 19 of 74 patients (26%) with angioscopic intracoronary thrombi versus only 5 of 48 (10%) without thrombi (P = .03). Relative risk analysis demonstrated that angioscopic thrombus was strongly associated with adverse outcomes (either a major complication or a recurrent ischemic event) after PTCA (relative risk, 3.11; 95% CI, 1.28 to 7.60; P = .01) and that angiographic thrombi were not associated with these complications (relative risk, 0.85; 95% CI, 0.36 to 2.00; P = .91). CONCLUSIONS: The presence of intracoronary thrombus associated with coronary stenoses is significantly underestimated by angiography. Angioscopic intracoronary thrombi, the majority of which were not detected by angiography, are associated with an increased incidence of adverse outcomes after coronary angioplasty.

Predictors of outcome of percutaneous excimer laser coronary angioplasty of saphenous vein bypass graft lesions. The Percutaneous Excimer Laser Coronary Angioplasty Registry.

A total of 495 patients underwent treatment with excimer laser angioplasty for 545 saphenous vein graft stenoses. Clinical success was achieved in 455 of 495 patients (92%), as indicated by < or = 50% residual stenosis at every target lesion and no complication during hospitalization. At least 1 in-hospital complication occurred in 30 of 495 patients (6.1%): death (1.0%), bypass surgery (0.6%), and Q-wave (2.4%) or non-Q-wave (2.2%) myocardial infarction. Relative risk analysis showed that ostial lesions (n = 65) tended to have higher clinical success (success rate = 95%, adjusted odds ratio [OR] = 2.1 [95% confidence interval (CI) 0.62, 6.88]; p = 0.24) and lower complications (complication rate = 0%, OR = 0.10 [CI 0.01, 0.79]; p = 0.03) than lesions in the body of the vein graft. Lesions > 10 mm (n = 131) had lower success (success rate = 84%, OR = 0.30 [CI 0.16, 0.56]; p = 0.001) and higher complications (complication rate = 12%, OR = 3.3 [CI 1.6, 6.6]; p = 0.004) than discrete lesions. Lesions in small vein grafts < 3.0 mm (n = 76) tended to have increased success (success rate = 94%, OR = 1.55 [CI 0.70, 3.44]; p = 0.39) and lower complications (complication rate = 2.2%, OR = 0.31 [CI 0.10, 0.94]; p = 0.03). Thus, excimer laser-facilitated angioplasty has the most favorable outcome for discrete lesions located at the ostium of all grafts and in the body of smaller saphenous vein grafts.(ABSTRACT TRUNCATED AT 250 WORDS)

Emergency cardiopulmonary support with circulatory support devices.

Emergency cardiopulmonary support has been used in the United States since 1986, mainly by physicians at participating centers for the National Registry of Elective Supported Angioplasty. Data from the National Registry as well as the experience in three institutions from a number of operators were analyzed to assess the benefits of the emergency cardiopulmonary support application in patients with hemodynamic collapse. Patients who had experienced either cardiac arrest or hemodynamic collapse with cardiogenic shock unresponsive to pressors were placed emergently on cardiopulmonary support. They were either then treated with angioplasty or with revascularization surgery. Patients placed on cardiopulmonary support in less than 15 min experienced a 48% survival rate across the whole registry of the participating centers of the National Cardiopulmonary Bypass Registry. A two-center experience has demonstrated a 69% survival rate. Patients treated with emergency cardiopulmonary support who have experienced hemodynamic collapse have improved survivorship over any other hemodynamic support system. With increasing experience by the operators, the results have improved for survivorship, particularly in the early application group.

Left ventricular myocardial blood flow in multivessel coronary artery disease.

The relationship between resting left ventricular (LV) myocardial blood flow (MBF) and hemodynamic determinants of myocardial oxygen consumption was investigated in 15 patients with multivessel coronary artery disease (CAD) and in 10 patients with normal coronary arteriograms. Mean LV MBF per unit mass of tissue was measured with a multicrystal scintillation camera from the regional clearance rates of xenon-133 injected into the left main coronary artery. Peak LV wall stress, mean velocity of circumferential fiber shortening (Vcf), rate of ejection during the first third of systole (1/3 SV), LV ejection fraction (EF), and the ratio of peak LV systolic pressure to LV end-systolic volume were measured by contrast left ventriculography. Mean LV MBF per unit mass was significantly reduced (48 +/- 11 vs 67 +/- 12 ml/100 g.min; p less than 0.01) in patients with multivessel CAD. However, none of the patients with CAD experienced chest pain or had electrocardiographic evidence of myocardial ischemia during the resting MBF measurements. Ejection phase indexes were lower in the patients with CAD: LVEF (56 +/- 10% vs 64 +/- 7%, p less than 0.05); 1/3 SV (35 +/- 3 vs 44 +/- 4%, p less than 0.05); and mean Vcf (1.05 +/- 0.30 vs 1.19 +/- 0.27 circ/sec, NS). LV wall thickness (9.8 +/- 1.9 vs 7.5 +/- 1.4 mm, p less than 0.01) and LV mass index (94 +/- 32 vs 64 +/- 17 g/m2, p less than 0.05) were significantly increased in the patients with CAD, accounting for the reduction in peak LV wall stress (276 +/- 73 vs 373 +/- 91 dyn-cm-2 x 10(-3), p less than 0.05) observed in these patients. Multiple regression analysis indicated that indexes of three of the major determinants of myocardial oxygen consumption explained 65% of the variation in MBF in patients with CAD: peak LV stress, mean Vcf and heart rate. After adjustment for these three indexes, the average LV MBF rates were not significantly different in the two patient groups (54.8 +/- 1.8 vs 57.6 +/- 2.3 ml/100 g.min). In both groups, resting LV MBF/beat correlated most highly with peak LV wall stress (r = 0.79). Thus, the reduction in LV MBF per unit mass observed in patients with multivessel CAD at rest is related to lower levels of hemodynamic variables that determine myocardial oxygen consumption. Peak LV wall stress is the most important hemodynamic variable determining the level of resting MBF in patients with and without CAD.

Comparison of three tests for the serological diagnosis of lymphocytic choriomeningitis virus infection.

Levels of lymphocytic choriomeningitis virus antibody were assayed in 62 infected persons. The three tests used were indirect fluorescent antibody (IFA), complement fixation, and neutralization in mice. The sera first became positive by the IFA test, and IFA titers rapidly rose to a relatively high level, with the sera remaining positive long after the antibody detectable by complement fixation had disappeared. The IFA test appeared to be specific. The sera became positive last by the mouse neutralization test; with this test, antibody first appeared several weeks after infection. Virus-infected cells were stable when stored at -60 C, allowing diagnostic sera to be tested promptly by the IFA test. The IFA test for lymphocytic choriomeningitis antibody should increase the number of serological diagnoses, since it is not only rapid and specific, but detects cases not diagnosed by the other methods.

Lymphocytic choriomeningitis outbreak associated with pet hamsters. Fifty-seven cases from New York State;.

An outbreak of lymphocytic choriomeningitis (LCM) associated with pet hamsters adquired through nationwide distributor was recognized in New York in February 1974. In upstate a New York, 57 cases occurred in a four-month period. Complete information was obtained on 49 patients ranging in age from 3 to 70 years. Characteristic findings included fever (90%), headache (85%), and severe myalgia (80%). Typically, laboratory findings consisted of a normal blood cell count and cerebrospinal fluid with mononuclear leukocyte pleocytosis and moderate hypoglycorrhacia. Al patients had contact with hamsters from one distributor. Most of the hamsters were acquired in mid to late December 1973, but some as late as March 1974. From each of eight families in which hamsters were available, at least one hamster had detectable complement-fixing antibodies for LCM. Infection rates within families varied with location and type of hamster cage; open cages and cages situated in common living areas were associated with highest infection rates (45% and 52%, respectively). Severity of illness was not associated with direct contact with hamsters. Onset of illness occurred between 8 and 90 days after initial exposure to hamsters.