Limb Salvage Using Lateral Circumflex Femoral Artery Graft for a Hand Vibration Syndrome.

A 50-year-old man was admitted to the hospital with a chief complaint of long-standing cold-induced numbness in the fingers for more than a year, accompanied by persistent hand pain and fingertip ulceration for 3 months. On physical examination, radial and ulnar artery pulsation was absent in both limbs, and pale skin color, low skin temperature, and limited finger range of motion were noted. Gangrene was detected in the fingertips of the left index and middle fingers, and the right middle and ring fingers. The patient was diagnosed with bilateral arterial occlusion and vibration white finger. Upon admission, the patient underwent an intervention surgery on the right side. Subsequently, transplantation of the descending branches of the left and right lateral femoral circumflex arteries was performed to restore blood flow in the bilateral radial arteries. Additionally, debridement was conducted without shortening after the surgical procedure, the patient received anticoagulation, anti-inflammatory, and symptomatic treatment. The bilateral finger skin temperature increased by 3 °C postoperatively, and the accompanying pain and numbness were alleviated. The wound healed 1 month after surgery, and no recurrence of pain or ulcer was reported during the 1-year follow-up period. Eventually, his hand function recovered, without any impact on the vascular donor site.

Role of microsurgical techniques combined with Ilizarov techniques in limb salvage and functional reconstruction of thermal­crush injuries of the hand: A case report.

The Ilizarov technology was proposed by Former Soviet orthopedic physician Ilizarov. It is a medical method to reconstruct missing tissues. Ilizarov technology combined with soft tissue stretching technology is of great significance in the treatment of common orthopedic problems like bone defects, finger absence, joint contracture and joint stiffness following thermal-crush injuries of the hand. In the present study a 25-year-old male patient sought for limb salvage treatment 1 month after sustaining thermal-crush injuries of the right hand and forearm. The patient had been treated by another hospital with multiple procedures of debridement, and recommended for forearm amputation. The patient was diagnosed with: i) Postoperative infection of thermal-crush injuries of the right hand and right forearm; ii) comminuted open fractures of the proximal and distal phalanges of the right thumb; iii) osteomyelitis; iv) palm skin defects with exposed tendons; and v) skin defects of the opisthenar and the forearm. After a series of treatments including debridement, removal of necrotic tissue, tissue transplantation, skin pedicle, bone lengthening, external shaping, tissue release, joint fusion, traction and rehabilitation exercises, the patient recovered some hand function. Overall, thermal-crush injuries of the hand are severe, complicated combined injuries composed of both heat burn and compression injury and their treatment is challenging. Overall, microsurgery combined with Ilizarov technology can effectively reconstruct the function of complex thermal-crush injuries of the hand.

Replantation of multiple fingertip amputations using super microsurgery: A case report and literature review.

Background: The fingertip amputation is an amputation type of the finger beyond the proximal nail fold. There is no vein available for anastomoses on the dorsal side of the finger, and the palmar vein of the finger is small and tightly attached to the skin. Therefore, it is relatively difficult to implement surgical anastomoses, which poses challenges to the clinical treatment of fingertip amputations. Case report: A 29-year-old male was admitted to the hospital due to "the amputation of the fingertips of the right index, middle, and ring fingers caused by a heavy object compression 3 h ago". The admission examination revealed that the right index, middle, and ring fingers were completely severed at the 1/2 plane of the nail bed, with irregular sections, severe contusion, and pollution. The X-ray examination showed comminuted fractures of the distal phalanges of the right index, middle, and ring fingers. Based on these findings, the patient was diagnosed with multiple severed fingertips of the right hand (Tamai Zone 1). The patient underwent debridement, vascular exploration, and replantation of the right index, middle, and ring fingertips under emergency general anesthesia. After surgery, anti-inflammatory, spasmolytic, and anticoagulant treatment and regular dressing changes were conducted. The patient did not receive a blood transfusion, and all three fingers survived. The appearance of these fingers was favorable 3 months after surgery, and the flexion and extension of these fingers were normal. Eventually, the patient achieved excellent Chen's hand function scores. Conclusions: To the best of our knowledge, this may be the first successful case regarding the replantation of three fingertips after amputations in Tamai Zone 1 with favorable outcomes. It can be maintained that super microsurgery can be used for the replantation of multiple fingertip amputations.

Ectopic multiple digit replantation salvage of hand torsion injury following anterolateral thigh perforator flap coverage.

Retrieval of four finger injury at proximal stump amputation with segmental injury along with soft tissue defect and impending compartment syndrome continues to be challenge for the surgeon. Immediate transplant considering temporary ectopic foster as a practical option in special case. We describe temporary ectopic finger implant for crush injury at Metacarpophalangeal (MCP level) with hand torsion along with forearm compartment was fostered to Dorsum of the foot. The torsion fingers was temporary fixed with mini external fixator for stabilization as salvage, ALT free flap was used to cover soft tissue defect of the hand. Replantation of survived figure was performed using the long pedicle to anatomical site without crushing the MCP joint to allow for later tendon transfer for finger. Satisfactory function regained with no foster site (foot) complication like pain or disability. The author validated ectopic foster for amputee as and procedure of choice for salvage of extremity under special circumstances.

The Limb Salvage Approach for the Surgical Management of Necrotizing Soft Tissue Infection.

Necrotizing soft tissue infection (NSTI) is a complex infection known for its rapid progression of necrosis within the subcutaneous tissue and fascia. Time is of essence for the management of NSTI. In this report, we present a case of NSTI after infection of poorly managed diabetic foot ulcer in the ankle. The limb salvage approach involves sequential staged procedures. Multiple surgical debridements and "washout" were performed for source control. At the same time, the patient also received a systemic antibiotic regimen. In the second stage, a perforator free flap taken from the anterolateral thigh was used to repair the extensive soft tissue defect and reconstruct a functional foot to achieve maximal limb salvage. The kickstand technique of external fixation was used to reduce soft tissue compression and enhance the surgical offloading of the skin flap. At the 2-year follow-up, the skin integrity of the flap was well-preserved, and the patient returned to his premorbid quality of life.

Combining texture features of whole slide images improves prognostic prediction of recurrence-free survival for cutaneous melanoma patients.

BACKGROUND: Accurate prediction of recurrence-free survival (RFS) is important for the prognosis of cutaneous melanoma patients. The image-based pathological examination remains as the gold standard for diagnosis. It is of clinical interest to account for computer-aided processing of pathology image when performing prognostic analysis. METHODS: We enrolled in this study a total of 152 patients from TCGA-SKCM (The Cancer Genome Atlas Skin Cutaneous Melanoma project) with complete information in recurrence-related survival time, baseline variables (clinicopathologic variables, mutation status of BRAF and NRAS genes), gene expression data, and whole slide image (WSI) features. We preprocessed WSI to segment global or nucleus areas, and extracted 3 types of texture features from each region. We performed cross validation and used multiple evaluation metrics including C-index and time-dependent AUC to determine the best model of predicting recurrence events. We further performed differential gene expression analysis between the higher and lower-risk groups within AJCC pathologic tumor stage III patients to explore the underlying molecular mechanisms driving risk stratification. RESULTS: The model combining baseline variables and WSI features had the best performance among models with any other types of data integration. The prognostic risk score generated by this model could provide a higher-resolution risk stratification within pathologically defined subgroups. We found the selected image features captured important immune-related variations, such as the aberration of expression in T cell activation and proliferation gene sets, and therefore contributed to the improved prediction. CONCLUSIONS: Our study provided a prognostic model based on the combination of baseline variables and computer-processed WSI features. This model provided more accurate prediction than models based on other types of data combination in recurrence-free survival analysis. TRIAL REGISTRATION: This study was based on public open data from TCGA and hence the study objects were retrospectively registered.

Experimental Study and Preliminary Clinical Application of Mini-invasive Percutaneous Internal Screw Fixation for Scaphoid Fracture under the Guidance of a 3D-printed Guide Plate.

This study explored the feasibility of employing computer-aided design (CAD) and 3 dimensional (3D)-printed personalized guide plate for the mini-invasive percutaneous internal screw fixation of fractured scaphoid. The study consisted of two parts: (1) experimentation on upper limbs from corpses and (2) preliminary clinical application. Corpse experiments involved upper limbs of 6 adult corpses. The specimens of upper limbs were subjected to plain CT scan. Then the CT data were input into computer to conduct 3D reconstruction of wrist region. The direction and depth of the guide wire and screw were designed on the basis of the principle that screw should lie at the center of scaphoid and the long axis of the screw should be aligned with that of the scaphoid. The carpal bone model and the guide plate were designed and 3D-printed. By using the guide plates, the guide wire was placed and the cannulated compression screw was inserted. The wrist region was examined by X-ray and CT to observe the location of the screw in the scaphoid. The scaphoid was longitudinally excised to grossly observe the location and evaluate the result of screw insertion. For clinical application, the guide plate was employed in 4 patients with fresh scaphoid fracture using the aforementioned operative technique. Our results showed that, in the 6 corpse limbs, the guide plate well fitted the skin surface and the guide wire and screw were accurately put in place in one session. X-ray examination and gross observation confirmed that the screw was satisfactorily positioned and the result met the requirements of the preoperative design. For 4 patients, the guide wire and screw were all precisely inserted into place in one session. The operation time and X-ray exposure times were apparently reduced. The imaging examination exhibited satisfactory results and the hand functioned well. It was concluded that the operative guide plate used for the mini-invasive percutaneous internal screw fixation of fractured scaphoid not only can assist in accurate placement of screw but also shorten operation time and reduce insertion and X-ray exposure times, thereby reducing the radiation injury and damage to the substance and the blood circulation of carpal bone. Its use can also improve the learning curve of surgeons.

A rare TTC30B variant is identified as a candidate for synpolydactyly in a Chinese pedigree.

BACKGROUND: Syndactyly type II (synpolydactyly, SPD) is a rare autosomal dominant inherited disease with higher incomplete penetrance. Currently, several variants in HOXD13 and one deletion in FBLN1 have been associated with SPD. However, the causative variants in several SPD families and their etiological mechanism are still largely unknown. METHODS: Whole exome and PCR-sanger sequencing followed by two-point linkage analysis were performed to identify the pathogenic variant in a six-generation Chinese pedigree. Homology modeling in combination with the RNAi and qRT-PCR experiments was used for revealing the pathogenic mechanism of the TTC30B variant. RESULTS: A six-generation SPD family was reported. The affected subjects in this family had no other clinical malformation beyond SPD. A rare missense variant c.1157C>T [p.Ala375Val] (chr2:178416368, hg19) in TTC30B was demonstrated to be responsible for this SPD family. The modeling structure indicated that the Ala375 was evolutionarily and structurally conserved. The variant p.Ala375Val was predicted to be deleterious for protein structure and/or stability. Two-point linkage analysis resulted in a maximum LOD score of 3.1444 (P = 0.000071). Furthermore, we found that TTC30B was regulated by the Shh signaling pathway and the abnormal expression of TTC30B will affect the activation of the Shh signaling pathway in human retinal pigment epithelial cells. CONCLUSIONS: This study demonstrates for the first time that an IFT (intraflagellar transport) - related gene TTC30B is implicated with SPD.

Transfection of neurotrophin-3 into neural stem cells using ultrasound with microbubbles to treat denervated muscle atrophy.

Neurotrophin-3 (NT-3) has potential as a therapeutic agent for the treatment of patients with denervated muscle atrophy. However, the endogenous secretion of NT-3 is low and exogenous NT-3 lacks sufficient time to accumulate due to its short half-life. The transfection of NT-3 has been demonstrated to have a beneficial effect on denervated muscle and motor endplates. Neural stem cells (NSCs) differentiate into neurons and form motor endplate nerve-muscle connections. It has been previously demonstrated that local and noninvasive transfection can be performed using ultrasound with microbubbles (MBs). In the current study, hematoxylin and eosin, acetylcholinesterase and gold chloride staining, as well as transmission electron microscopy, were performed to verify the effects of this treatment strategy. The results demonstrated that using ultrasound with MBs for the transfection of NT-3 into NSCs, and their subsequent transplantation in vivo, attenuated the atrophy of denervated muscle and reduced motor endplate degeneration. This noninvasive, efficient and targeted treatment strategy may therefore be a potential treatment for patients with denervated muscle atrophy.

Three-dimensional-printed upper limb prosthesis for a child with traumatic amputation of right wrist: A case report.

RATIONALE: For traumatic upper limb amputees, the prohibitive cost of a custom-made prosthesis brings an insufferable financial burden for their families in developing countries. Three-dimensional (3D) printing allows for creating affordable, lightweight, customized, and well-fitting prosthesis, especially for the growing children. PATIENT CONCERNS: We presented a case of an 8-year-old boy, who suffered a traumatic right wrist amputation as result of a mincing machine accident. The patient was immediately sent to the emergency orthopedics department after the accident. DIAGNOSES: He was diagnosed as severed mangled limb crash injury at the level of the right wrist with a Mangled Extremity Severity Score of 8. INTERVENTIONS: A wrist disarticulation was performed and a 3D-printed prosthetic hand was designed and manufactured for this child. A personalized prosthetic rehabilitation training was applied after the prosthesis installation at 6 months postoperatively. The function of the prosthesis was evaluated at 1-month and 3-month follow-up using the Children Amputee Prosthetics Projects (CAPP) score and the University Of New Brunswick Test Of Prosthetic Function for Unilateral Amputees (UNB test). OUTCOMES: The materials cost <20 dollars. The printing took <8 hours and the component assembling was completed within 20 minutes. During the 3-month follow-up, the child's parents were satisfied with the prosthesis and the UNB test showed the significantly improved function of the prosthesis. LESSONS: This novel 3D-printed upper limb prosthesis in a child with the traumatic wrist amputation might serve as a practical and affordable alternative for children in developing countries and those lacking access to health care providers. A personalized prosthetic rehabilitation needs to be undertaken and more clinical studies are warranted to validate the potential superiority of similar 3D-printed prostheses.

Dynamic observation on the effects of different suture techniques on the biomechanical properties in the healing of tendons.

To identify the best suture techniques for the tendon repair, the biomechanical properties of tendons sutured by different methods were dynamically examined. 140 chickens were divided into 2 groups equally: group A and group B. The tendon of the right side was subjected to injury-repair process, and the tendons of the left sides served as controls in both groups. In group A, "figure-of-8" suture, modified Kessler suture and Bunnell suture were used for the 2nd to 4th paws respectively, while in group B, Kleinert suture, Tsuge suture and Ikuta suture were used. On the day 0, 3, 7, 14, 21, 28, 42 after operation, 10 animals were sacrificed and the flexor tendons of both sides were harvested for strength test. The results showed that the initial strength of the repaired tendons and the strength after 6 weeks following tendon cut were far below those of intact tendons, irrespective of suture techniques used. With the 6 techniques, the P(max) of tendons repaired by Tsuge suture was increased continually, reaching the highest value on the 42nd day. The P(max) of tendons sutured by the modified Kessler suture was slightly lower than that by Tsuge suture, but it was increased steadily in healing. The tendons repaired by figure-of-8 suture yielded the lowest P(max). It was concluded that Tsuge suture and modified Kessler suture were the best techniques for tendon repair.

Protective effects of ciliary neurotrophic factor on denervated skeletal muscle.

To study the effects of ciliary neurotrophic factor (CNTF) on denervated skeletal muscle atrophy and to find a new approach to ameliorate atrophy of denervated muscle, a model was established by cutting the right sciatic nerve in 36 Wistar mice, with the left side serving as control. Then they were divided into two groups randomly. CNTF (1 U/ml) 0.1 ml was injected into the right tibial muscle every day in experimental group, and saline was used into another group for comparison. The muscle wet weight, muscle total protein, Ca2+, physiological response and morphology were analyzed on the 7th, 14th and 28th day after operation. Our results showed that compared to control group, there was a significant increase in muscle wet weight, total protein, Ca2+, muscle fiber cross-section area in CNTF group (P < 0.05). CNTF could ameliorate the decrease of tetanic tension (PO), post-tetanic twitch potentiation (PTP), and the prolonged muscle relaxation time (RT) caused by denervation (P < 0.05). The motor end-plate areas 7 days and 14 days after denervation was similar (P > 0.05), but significantly larger 28 days after the denervation (P < 0.05). Our results suggest that CNTF exerts myotrophic effects by attenuating the morphological and functional changes associated with denervation of rat muscles and has protective effects on denervated muscle and motor end plate.