Reticular Ratchets for Directing Electrochemiluminescence.

Electrochemiluminescence (ECL) involves charge transfer between electrochemical redox intermediates to produce an excited state for light emission. Ensuring precise control of charge transfer is essential for decoding ECL fundamentals, yet guidelines on how to achieve this for conventional emitters remain unexplored. Molecular ratchets offer a potential solution, as they enable the directional transfer of energy or chemicals while impeding the reverse movement. Herein, we designed 10 pairs of imine-based covalent organic frameworks as reticular ratchets to delicately manipulate the intrareticular charge transfer for directing ECL transduction from electric and chemical energies. Aligning the donor and acceptor (D-A) directions with the imine dipole effectively facilitates charge migration, whereas reversing the D-A direction impedes it. Notably, the ratchet effect of charge transfer directionality intensified with increasing D-A contrast, resulting in a remarkable 680-fold improvement in the ECL efficiency. Furthermore, dipole-controlled exciton binding energy, electron/hole decay kinetics, and femtosecond transient absorption spectra identified the electron transfer tendency from the N-end toward the C-end of reticular ratchets during ECL transduction. An exponential correlation between the ECL efficiency and the dipole difference was discovered. Our work provides a general approach to manipulate charge transfer and design next-generation electrochemical devices.

Label-free detection and profiling of individual solution-phase molecules.

Most chemistry and biology occurs in solution, in which conformational dynamics and complexation underlie behaviour and function. Single-molecule techniques1 are uniquely suited to resolving molecular diversity and new label-free approaches are reshaping the power of single-molecule measurements. A label-free single-molecule method2-16 capable of revealing details of molecular conformation in solution17,18 would allow a new microscopic perspective of unprecedented detail. Here we use the enhanced light-molecule interactions in high-finesse fibre-based Fabry-Pérot microcavities19-21 to detect individual biomolecules as small as 1.2 kDa, a ten-amino-acid peptide, with signal-to-noise ratios (SNRs) >100, even as the molecules are unlabelled and freely diffusing in solution. Our method delivers 2D intensity and temporal profiles, enabling the distinction of subpopulations in mixed samples. Notably, we observe a linear relationship between passage time and molecular radius, unlocking the potential to gather crucial information about diffusion and solution-phase conformation. Furthermore, mixtures of biomolecule isomers of the same molecular weight and composition but different conformation can also be resolved. Detection is based on the creation of a new molecular velocity filter window and a dynamic thermal priming mechanism that make use of the interplay between optical and thermal dynamics22,23 and Pound-Drever-Hall (PDH) cavity locking24 to reveal molecular motion even while suppressing environmental noise. New in vitro ways of revealing molecular conformation, diversity and dynamics can find broad potential for applications in the life and chemical sciences.

Heterojunction formed via 3D-to-2D perovskite conversion for photostable wide-bandgap perovskite solar cells.

Light-induced halide segregation constrains the photovoltaic performance and stability of wide-bandgap perovskite solar cells and tandem cells. The implementation of an intermixed two-dimensional/three-dimensional heterostructure via solution post-treatment is a typical strategy to improve the efficiency and stability of perovskite solar cells. However, owing to the composition-dependent sensitivity of surface reconstruction, the conventional solution post-treatment is suboptimal for methylammonium-free and cesium/bromide-enriched wide-bandgap PSCs. To address this, we develop a generic three-dimensional to two-dimensional perovskite conversion approach to realize a preferential growth of wider dimensionality (n ≥ 2) atop wide-bandgap perovskite layers (1.78 eV). This technique involves depositing a well-defined MAPbI3 thin layer through a vapor-assisted two-step process, followed by its conversion into a two-dimensional structure. Such a two-dimensional/three-dimensional heterostructure enables suppressed light-induced halide segregation, reduced non-radiative interfacial recombination, and facilitated charge extraction. The wide-bandgap perovskite solar cells demonstrate a champion power conversion efficiency of 19.6% and an open-circuit voltage of 1.32 V. By integrating with the thermal-stable FAPb0.5Sn0.5I3 narrow-bandgap perovskites, our all-perovskite tandem solar cells exhibit a stabilized PCE of 28.1% and retain 90% of the initial performance after 855 hours of continuous 1-sun illumination.

All-Optical Switching Based on Sub-Bandgap Photoactivation of Charge Trapping in Metal Halide Perovskites.

Controllable optical properties are crucial for the application of light-emitting materials in optical devices. In this work, controllable photoluminescence in metal halide perovskite crystals is realized via photoactivation of their defects. It is found that under continuous excitation, the photoluminescence intensity of a CH3 NH3 PbBr3 crystal can be fully controlled by sub-bandgap energy photon illumination. Such optically controllable emission behavior is rather general as it is observed also in CsPbBr3 and other perovskite materials. The switching mechanism is assigned to reversible light-induced activation/deactivation of nonradiative recombination centers, the presence of which relates to an excess of Pb during perovskite synthesis. Given the success of perovskites in photovoltaics and optoelectronics, it is believed that the discovery of green luminescence controlled by red illumination will extend the application scope of perovskites toward optical devices and intelligent control.

Ultrasensitive detection of local acoustic vibrations at room temperature by plasmon-enhanced single-molecule fluorescence.

Sensitive detection of local acoustic vibrations at the nanometer scale has promising potential applications involving miniaturized devices in many areas, such as geological exploration, military reconnaissance, and ultrasound imaging. However, sensitive detection of weak acoustic signals with high spatial resolution at room temperature has become a major challenge. Here, we report a nanometer-scale system for acoustic detection with a single molecule as a probe based on minute variations of its distance to the surface of a plasmonic gold nanorod. This system can extract the frequency and amplitude of acoustic vibrations with experimental and theoretical sensitivities of 10 pm Hz-1/2 and 10 fm Hz-1/2, respectively. This approach provides a strategy for the optical detection of acoustic waves based on molecular spectroscopy without electromagnetic interference. Moreover, such a small nano-acoustic detector with 40-nm size can be employed to monitor acoustic vibrations or read out the quantum states of nanomechanical devices.

Steric Engineering Enables Efficient and Photostable Wide-Bandgap Perovskites for All-Perovskite Tandem Solar Cells.

Wide-bandgap (WBG, ≈1.8 eV) perovskite is a crucial component to pair with narrow-bandgap perovskite in low-cost monolithic all-perovskite tandem solar cells. However, the stability and efficiency of WBG perovskite solar cells (PSCs) are constrained by the light-induced halide segregation and by the large photovoltage deficit. Here, a steric engineering to obtain high-quality and photostable WBG perovskites (≈1.8 eV) suitable for all-perovskite tandems is reported. By alloying dimethylammonium and chloride into the mixed-cation mixed-halide perovskites, wide bandgaps are obtained with much lower bromide contents while the lattice strain and trap densities are simultaneously minimized. The WBG PSCs exhibit considerably improved performance and photostability, retaining >90% of their initial efficiencies after 1000 h of operation at maximum power point. With the triple-cation/triple-halide WBG perovskites enabled by steric engineering, a stabilized power conversion efficiency of 26.0% in all-perovskite tandem solar cells is further obtained. The strategy provides an avenue to fabricate efficient and stable WBG subcells for multijunction photovoltaic devices.

Nonblinking Colloidal Quantum Dots via Efficient Multiexciton Emission.

Nonblinking colloidal quantum dots (QDs) are significant to their applications as single-photon sources or light-emitting materials. Herein, a simple heat-up method was developed to synthesize high-qualityWZ-CdSe/CdS core-shell colloidal QDs, which achieved a near-unity photoluminescence quantum yield (PLQY). It was found that the blinking behavior of such QDs was completely suppressed at high excitation intensities, and ultra-stable PL emission was observed. For this reason, a systematic investigation was conducted, revealing that the complete blinking suppression was attributed mainly to the efficient multiexciton emission at high excitation intensities. Such high-quality QDs with nonblinking behaviors and nearly ideal PL properties at high excitation intensities have massive potential applications in various robust conditions, including QD display screens, single-particle tracks, and single-photon sources.

Controllable Introduction of Surface Defects on CH3NH3PbI3 Perovskite.

One of the unique characteristics of semiconductors is the strong dependence of their properties on crystal defects and doping. However, due to the species diversity and low density, it is very difficult to control the type and concentration of the defects. In perovskite materials, crystal defects are randomly formed during the fast crystallization process, causing large heterogeneity of the samples. Here, in this work, we report a controllable method to introduce surface defects on CH3NH3PbI3 perovskite materials via the interaction with 1,4-benzoquinone (BQ) molecules on the gas and solid interface. After the adsorption of BQ molecules on the perovskite surface, surface defects can be generated by photoinduced chemical reactions. The concentration of the defects can thus be controlled by precisely regulating the laser irradiation time. The concentration of the defects can be characterized by a gradually decreased PL intensity and lifetime and was found to influence the atmospheric response and the subsequent acetone-induced degradation of the materials. These results demonstrate that crystal defects in perovskite materials can be controllably introduced, which provides a possible way to fully understand the correlation between the nature and chemical structure of these defects.

Rational Building of Nonblinking Carbon Dots via Charged State Recovery.

Carbon dots (CDs), as emerging luminescent nanomaterials, possess excellent but complex properties, and thus, they have attracted immense attention for their applications. Further practical application of CDs has been hindered by their limited photostability and photoluminescence intermittency. In this study, we demonstrated that an antioxidant (Trolox) can dramatically enhance the photostability and minimize the photoblinking of CDs without affecting their native spectral characteristics. Significant photoluminescence enhancement and stabilization were observed with the addition of Trolox in ensemble level. Meanwhile, strikingly stable emissions from individual CDs have been observed in the presence of Trolox in single-particle-level experiments. Our observations revealed that the charged state of CDs can be effectively recovered to a neutral state by Trolox via electron transfer. These results prove that the combination of antioxidants and CDs is a powerful means to improve their fluorescence robustness, which is crucial for applications that demand long-lived, nonblinking emission.

Electric-Field-Induced Ion Migration Behavior in Methylammonium Lead Iodide Perovskite.

Ionic movement inside organometal halide perovskites (OMHP) materials has been widely reported to be linked with stability issues in the perovskite-based optoelectronic devices. However, the dynamic processes of the ionic movement and how they influence the devices are still not well-understood. In this work, we applied an external electric field to the CH3NH3PbI3 crystal and simultaneously monitored the PL behaviors. Two successive PL responses were observed in the same location of the crystal. First, an irreversible PL quenching was observed caused by the photo-annealing effect under an electric field accompanied by a permanent morphology change. The annealed area also showed reversible PL variation, which was attributed to the activation-deactivation of the radiative recombination centers induced by the migration of the iodine ions. Such results can help us gain a deep insight into how the ionic movements in OMHPs influence the performance of the perovskite-based optoelectronic devices under working conditions.

Deactivation/Activation of Quenching Defects in CH3NH3PbI3 Perovskite by Direct Electron Injection/Extraction.

Organometal halide perovskites (OMHPs) have emerged as advisible materials for application in optoelectronic devices over the past decade. However, a variety of complex slow responses in OMHPs under an external electric field have been observed, and the mechanisms for these responses remain a topic of intense debate. In this work, with an external voltage applied to the CH3NH3PbI3 crystal, reversible photoluminescence (PL) enhancement and quenching behaviors respectively near the anode and the cathode were observed under wide-field fluorescence microscopy. Further experiments attribute the reversible PL enhancing responses to the electron injection effect increasing the radiative recombination, while PL quenching was attributed to be due to the electron extraction effect increasing the nonradiative recombination. The control of PL by external applied voltage indicates brilliant carrier mobility in the CH3NH3PbI3 crystal and also reminds us to focus on the effect of hole/electron injection on the materials which may limit the performance of perovskite-based optoelectronic devices.

Physical insights into protection effect of conjugated polymers by natural antioxidants.

Conjugated polymers (CPs) known as organic semiconductors have been broadly applied in photovoltaic and light emitting devices due to their easy fabrication and flexibility. However, one of the bottlenecks limiting the application of CPs is their poor photostability upon continuous excitation which is one of the crucial parameters of CPs. How to improve the photostability of CPs is always one of the key questions in this field. In this work, we found that the photostability of poly(3-hexylthiophene-2,5-diyl) (P3HT) molecules can be largely improved by addition of vitamin E (VE) in bulk solution, solid films and single molecules. In solution and films, VE can not only significantly retard the photodegradation of P3HT but also enhance the fluorescence intensity. For individual P3HT molecules, with increasing VE concentrations, the on-time duration increases and the off-time duration becomes shorter. VE as natural antioxidants can not only donate electrons to the long-lived charged species but also quench the triplet states of CPs via energy transfer accelerating the depopulation process back to the ground state. The short duration time of the charged species and the triplet states provides higher fluorescence intensity. Furthermore, VE can also directly react with singlet oxygen or other reactive oxygen species (ROS) preventing them from reacting with CPs. These results not only provide an efficient strategy for improving the photostability of conjugated polymers in solution and films, but also shed light on better understanding the photophysics of conjugated polymers at single-molecule level.

Identification of the Band Gap Energy of Two-dimensional (OA)2(MA)n-1PbnI3n+1 Perovskite with up to 10 Layers.

Two-dimensional (2D) perovskites are attracting broad attention for their stability and wavelength tunability. However, random crystallization of sample preparation makes it difficult to obtain 2D perovskites with pure structure, especially when the number of layers is large. Herein, we prepared 2D perovskite (C8H17NH3)2(MA)n-1PbnI3n+1 with different layers (n = 1-10). For the first time, we experimentally identified the band gap energy Eg of 2D perovskite (C8H17NH3)2(MA)n-1PbnI3n+1 with layers up to 10 by investigating specific pieces of crystal with pure emission spectra using fluorescence microscopy. Intriguingly, the relationship between Eg and n perfectly fits an exponential function rather than the pure quantum confinement effect in good agreement with the theoretical calculation based on first principles. Our results suggest that the band gap of the 2D perovskite is determined not only by quantum confinement effect, but other factors including chemical components also give significant contribution.

Photo-induced dual passivation via Usanovich acid-base on surface defects of methylammonium lead triiodide perovskite.

Post-fabrication defect passivation of organometal halide perovskites has become an efficient way to improve their photophysical properties, but the underlying mechanisms are still in debate. In this work, we used p-benzoquinone (p-BQ) to generate surface defects on methylammonium lead triiodide perovskite (MAPbI3), and found that a Usanovich acid-base (O2, acetone or acetonitrile) treatment can effectively passivate those defects and lead to photoluminescence (PL) enhancement. The passivation effect arose from partial neutralization of defect charges via electron transfer between passivation reagents and relevant defects. O2 accepted photo-generated electrons, formed negatively charged oxygen species and attached to the I vacancy site to reduce its PL quenching efficiency by neutralising the defects positive charge. Likewise, acetone accepted photo-generated holes, formed positively charged species and partially neutralised the defects negative charge. The reduced trapping ability of defects caused PL enhancement. In addition, the observed photo-catalysed oxidation of acetone by O2 on the crystal surface supported the single electron transfer mechanism, and showed the potential of MAPbI3 as a photo-catalyst.

Conjugated or Broken: The Introduction of Isolation Spacer ahead of the Anchoring Moiety and the Improved Device Performance.

Acceptors in traditional dyes are generally designed closed to TiO2 substrate to form a strong electronic coupling with each other (e.g., cyanoacrylic acid) to enhance the electron injection for the high performance of the corresponding solar cells. However, some newly developed dyes with chromophores or main acceptors isolated from anchoring groups also exhibit comparable or even higher performances. To investigate the relatively untouched electronic coupling effect in dye-sensitized solar cells, a relatively precise method is proposed in which the strength is adjusted gradually by changing isolation spacers between main acceptors and anchoring groups to partially control the electronic interaction. After an analysis of 3 different groups of 11 sensitizers, it is inferred that the electronic coupling should be kept at a suitable level to balance the electron injection and recombination. Based on a reference dye LI-81 possessing a cyanoacrylic acid as acceptor and anchoring group, both photocurrent and photovoltage are synergistically improved after the properties of isolation spacers were changed through the adjustment of the length, steric hindrance, and push-pull electronic characteristic. Accordingly, the rationally designed dye LI-87 with an isolation spacer of thiophene ethylene gives an efficiency of 8.54% and further improved to 9.07% in the presence of CDCA, showing a new way to develop efficient sensitizers.