Incidental multifocal calcifying pseudoneoplasm of the neuraxis: case report and literature review.

Calcifying pseudoneoplasm of the neuraxis (CAPNON) is thought to be a rare tumefactive lesion with unknown pathogenesis. Its prevalence is questionable with few previously reported cases of incidental CAPNON, and likely underdiagnosis. We report a unique case of incidental multifocal CAPNON. A 64-year-old female was admitted with loss of consciousness due to a ruptured right middle cerebral artery aneurysm with subarachnoid and intraventricular hemorrhage. She has a craniotomy and clipping. At time of operation, numerous small dural-based nodules were found, and one was excised for biopsy and was diagnosed as CAPNON. Retrospective review of her CT images identified nodules that were all ipsilateral to the ruptured aneurysm. A literature review revealed that incidental and/or multifocal CAPNONs are rare but likely underreported. Our case suggests a reactive process in the pathogenesis of CAPNON.

ALK-negative CNS anaplastic large cell lymphoma: case report and review of literature.

BACKGROUND: Central nervous system (CNS) lymphomas frequently pose a diagnostic challenge to physicians. CNS anaplastic large cell lymphoma (ALCL) is a rare condition. A majority (80%) of ALCLs harbour anaplastic lymphoma kinase 1 (ALK-1) mutation with only a minority testing negative for this mutation. METHODS: Here we report a rare case of ALK-negative CNS ALCL with dural involvement. We conducted a literature search using PubMed for published studies in English on cases of patients with ALCL of the brain. The keywords used were 'anaplastic large cell lymphoma', 'ALK' and 'primary central nervous system lymphoma'. RESULTS: A 63-year-old man presents with waxing and waning cranial nerve and spinal cord symptoms. MRI revealed multiple intracranial and intra-spinal lesions that were highly steroid responsive. A wide range of serum and CSF tests were non-diagnostic during three months of workup before a lesion appeared in the cervical spine that required decompression and allowed us to obtain a tissue sample. Final pathology revealed ALK-negative ALCL. There are only 24 reported adult cases to date of CNS ALCL in the English literature. To our knowledge, this is the first case of ALK-negative ALCL with primarily CNS and meningeal involvement. CONCLUSIONS: ALK-negative ALCL with CNS involvement is extremely rare, which frequently results in delayed diagnosis (average 40.5 days). The diagnostic challenge posed by this case highlights the importance of a team approach to workup and diligent patient follow-up for such a rare disease.

Cost-Effective Cranioplasty Utilizing 3D Printed Molds: A Canadian Single-Center Experience.

BACKGROUND: Cranioplasty is a commonly performed neurosurgical procedure used to repair defects of the cranial vault. For large defects, 3D printing allows for the creation of patient-specific synthetic cranioplasties. Although these implants provide excellent cosmetic results for patients, costs are quite high. This makes their routine use challenging in the current Canadian healthcare environment. The purpose of this study is to report our experience with a novel, cost-effective method for cranioplasty using desktop 3D printers to manufacture patient-specific molds to aid in the shaping of polymethyl methacrylate (PMMA) cranioplasty intraoperatively. METHODS: A retrospective review of patients who underwent cranioplasty utilizing 3D printed custom molds was conducted at a single center between 2018 and 2020. Either a two-piece self-align or open-air mold was utilized. Material cost, as well as demographic, clinical, and radiologic data, was reviewed. A five-point ordinance scale was used to evaluate patient satisfaction with cosmesis. RESULTS: Four patients had previous craniectomies with infected bone flaps, 2 patients had significant bony destruction from tumor invasion, and 1 patient had bone flap resorption. Three patients underwent an open-air mold technique with a Ti-mesh/PMMA-combined implant. The remaining 4 patients underwent two-piece mold with PMMA-only implant. All patients had 'Good' to 'Excellent' cosmetic outcome with one post-operative acute subdural hematoma and one post-operative infection. Two-piece mold resulted in improved cosmetic outcome and cost savings. CONCLUSIONS: 3D printing can be used in a cost-effective manner to deliver good cranioplasty cosmesis. Wider adoption of this technique can result in significant healthcare cost savings without compromising patient outcome.

First multicenter experience using the Silk Vista flow diverter in 60 consecutive intracranial aneurysms: technical aspects.

BACKGROUND: The aim of this study was to assess the technical success and procedural safety of the new Silk Vista device (SV) by evaluating the intraprocedural and periprocedural complication rate after its use in several institutions worldwide. METHODS: The study involved a retrospective review of multicenter data regarding a consecutive series of patients with intracranial aneurysms, treated with the SV between September 2020 and January 2021. Clinical, intra/periprocedural and angiographic data, including approach, materials used, aneurysm size and location, device/s, technical details and initial angiographic aneurysm occlusion, were analyzed. RESULTS: 60 aneurysms were treated with SV in 57 procedures. 66 devices were used, 3 removed and 63 implanted. The devices opened instantaneously in 60 out of 66 (91%) cases and complete wall apposition was achieved in 58 out of 63 (92%) devices implanted. In 4 out of 66 (6%) devices a partial opening of the distal end occurred, and in 5 (8%) devices incomplete apposition was reported. There were 3 (5%) intraprocedural thromboembolic events managed successfully with no permanent neurological morbidity, and 4 (7%) postprocedural events. There was no mortality in this study. The initial occlusion rates in the 60 aneurysms were as follows: O'Kelly-Marotta (OKM) A in 34 (57%) cases, OKM B in 15 (25%) cases, OKM C in 6 (10%) cases, and OKM D in 5 (8%) cases. CONCLUSIONS: Our study demonstrated that the use of the new flow diverter Silk Vista for the treatment of intracranial aneurysms is feasible and technically safe.

Skull Base Calcifying Pseudoneoplasms of the Neuraxis: Two Case Reports and a Systematic Review of the Literature.

BACKGROUND: Calcifying pseudoneoplasm of the neuraxis (CAPNON) is a rare tumefactive lesion. CAPNONs can mimic calcified meningiomas at the skull base. METHODS: Here, we report two cases of CAPNON and present a systematic review of the literature on skull base CAPNONs, to compare CAPNONs with calcified meningiomas. RESULTS: Case 1: A 57-year-old man presented with right-sided lower cranial neuropathies and gait ataxia. He underwent a subtotal resection of a right cerebellopontine angle lesion, with significant improvement of his gait ataxia. However, his cranial neuropathies persisted. Pathological examination of the lesion was diagnostic of CAPNON, with the entrapped nerve fibers identified at the periphery of the lesion, correlating with the patient's cranial neuropathy. Case 2: A 70-year-old man presented with progressive headache, gait difficulty, and cognitive impairment. He underwent a frontotemporal craniotomy for a near-total resection of his right basal frontal CAPNON. He remained neurologically stable 7 years after the initial resection without evidence of disease recurrence. We analyzed 24 reported CAPNONs at the skull base in our systematic review of the literature. Cranial neuropathies were present in 11 (45.8%) patients. Outcomes regarding cranial neuropathies were documented in six patients: two had sacrifice of the nerve function with surgical approaches and four had persistent cranial neuropathies. CONCLUSION: While CAPNON can radiologically and grossly mimic calcified meningiomas, they are two distinctly different pathologies. CAPNONs located at the skull base are commonly associated with cranial neuropathies, which may be difficult to reverse despite surgical intervention.

Circle of Willis Collateral During Temporary Internal Carotid Artery Occlusion II: Observations From Computed Tomography Angiography.

INTRODUCTION: The Circle of Willis (CoW) is the most effective collateral circulation to the brain during internal carotid artery (ICA) occlusion. Carotid stump pressure (CSP) is an established surrogate measure of the cerebral collateral circulation. This study aims to use hemodynamic and computed tomography angiography measurements to determine the strongest influences upon the dependent variable, CSP. These findings could help clinicians noninvasively assess the adequacy of the collateral circulation and facilitate surgical risk assessment in an outpatient setting. METHODS: CSP and mean arterial pressure were measured during carotid endarterectomy or during carotid balloon test occlusion in 92 patients. Intracranial arterial diameters were measured on computed tomography angiography at 16 different locations. Univariate and multivariate analyses were used to determine the key factors associated with CSP. In a subgroup of individuals (n=27) with severe (>70% North American Symptomatic Carotid Endarterectomy Trial) contralateral stenosis or occlusion, the same analysis was performed. RESULTS: The contralateral anterior cerebral artery proximal to anterior communicating artery (A1) of the CoW had the strongest influence upon CSP, followed by the mean arterial pressure, the contralateral ICA diameter, and the anterior communicating artery diameter (R 2=0.364). In the subgroup with high-grade contralateral ICA stenosis, the ipsilateral posterior communicating artery exerted the strongest influence (R 2=0.620). CONCLUSIONS: During ICA occlusion, the anterior CoW dominates in preserving collateral flow, especially the contralateral A1 segment. In individuals with high-grade contralateral carotid stenosis, the posterior communicating artery calibre becomes a dominant influence. The most favourable anatomy consists of large contralateral A1 and anterior communicating arteries, and no contralateral carotid stenosis.

Formulations of polyvinyl alcohol cryogel that mimic the biomechanical properties of soft tissues in the natural lumbar intervertebral disc.

STUDY DESIGN: An original investigation that characterizes polyvinyl alcohol cryogel (PVA-C) in the context of the human lumbar intervertebral disc (IVD). OBJECTIVES: To evaluate the mechanical properties of PVA-C under physiological conditions; to assess PVA-C's suitability as a key component in a tissue-mimicking artificial lumbar intervertebral disc; and to identify suitable formulations that mimic the nucleus pulposus and anulus fibrosus. SUMMARY OF BACKGROUND DATA: Current lumbar intervertebral disc prostheses provide suboptimal symptom relief and do not restore natural load-cushioning. PVA-C is a promising material due to its high water content, excellent biocompatibility, and versatile mechanical properties. METHODS: PVA-C samples were prepared with different PVA concentrations and number of freeze-thaw cycles (FTC). Unconfined compression was conducted to characterize various PVA-C formulations. Compressive stress relaxation and creep were performed to assess the stability of PVA-C under loading. The results were compared to the mechanical properties of human lumbar intervertebral discs obtained from literature. RESULTS: PVA-C compressive elastic modulus increased with increasing PVA concentration and number of FTC's. The 3% 3FTC is the optimal formulation for mimicking the nucleus pulposus in compression. In general, compressive stress relaxation and creep decreased with increasing PVA concentration and number of FTC's. Compressive stress relaxation and creep were lower for PVA-C than human lumbar intervertebral discs, suggesting that PVA-C will likely exhibit stable and predictable mechanical response in vivo. All formulations provided good mimicry of the human IVD in stress relaxation and creep. PVA-C also provided good match to the anulus fibrosus matrix. CONCLUSION: Good unconfined compression, stress relaxation and creep behavior, combined with excellent biocompatibility, makes PVA-C a suitable choice as a major component of a tissue-mimicking artificial IVD. A potential artificial IVD design combining two or more different PVA-C formulations could provide excellent overall mimicry of the human IVD. Results of this investigation provide a solid foundation for future work in this area.