Stress-Tolerant Nanoporous Germanium Nanofibers for Long Cycle Life Lithium Storage with High Structural Stability.

Nanowires (NWs) synthesized via chemical vapor deposition (CVD) have demonstrated significant improvement in lithium storage performance along with their outstanding accommodation of large volume changes during the charge/discharge process. Nevertheless, NW electrodes have been confined to the research level due to the lack of scalability and severe side reactions by their high surface area. Here, we present nanoporous Ge nanofibers (NPGeNFs) having moderate nanoporosity via a combination of simple electrospinning and a low-energetic zincothermic reduction reaction. In contrast with the CVD-assisted NW growth, our method provides high tunability of macro/microscopic morphologies such as a porosity, length, and diameter of the nanoscale 1D structures. Significantly, the customized NPGeNFs showed a highly suppressed volume expansion of less than 15% (for electrodes) after full lithation and excellent durability with high lithium storage performance over 500 cycles. Our approach offers effective 1D nanostructuring with highly customized geometries and can be extended to other applications including optoelectronics, catalysis, and energy conversion.

Li+-Desolvation Dictating Lithium-Ion Battery's Low-Temperature Performances.

Lithium (Li) ion battery has penetrated almost every aspect of human life, from portable electronics, vehicles, to grids, and its operation stability in extreme environments is becoming increasingly important. Among these, subzero temperature presents a kinetic challenge to the electrochemical reactions required to deliver the stored energy. In this work, we attempted to identify the rate-determining process for Li+ migration under such low temperatures, so that an optimum electrolyte formulation could be designed to maximize the energy output. Substantial increase in the available capacities from graphite∥LiNi0.80Co0.15Al0.05O2 chemistry down to -40 °C is achieved by reducing the solvent molecule that more tightly binds to Li+ and thus constitutes a high desolvation energy barrier. The fundamental understanding is applicable universally to a wide spectrum of electrochemical devices that have to operate in similar environments.

Excess Li-Ion Storage on Reconstructed Surfaces of Nanocrystals To Boost Battery Performance.

Because of their enhanced kinetic properties, nanocrystallites have received much attention as potential electrode materials for energy storage. However, because of the large specific surface areas of nanocrystallites, they usually suffer from decreased energy density, cycling stability, and effective electrode capacity. In this work, we report a size-dependent excess capacity beyond theoretical value (170 mA h g-1) by introducing extra lithium storage at the reconstructed surface in nanosized LiFePO4 (LFP) cathode materials (186 and 207 mA h g-1 in samples with mean particle sizes of 83 and 42 nm, respectively). Moreover, this LFP composite also shows excellent cycling stability and high rate performance. Our multimodal experimental characterizations and ab initio calculations reveal that the surface extra lithium storage is mainly attributed to the charge passivation of Fe by the surface C-O-Fe bonds, which can enhance binding energy for surface lithium by compensating surface Fe truncated symmetry to create two types of extra positions for Li-ion storage at the reconstructed surfaces. Such surface reconstruction nanotechnology for excess Li-ion storage makes full use of the large specific surface area of the nanocrystallites, which can maintain the fast Li-ion transport and greatly enhance the capacity. This discovery and nanotechnology can be used for the design of high-capacity and efficient lithium ion batteries.

Wide-Temperature Electrolytes for Lithium-Ion Batteries.

Formulating electrolytes with solvents of low freezing points and high dielectric constants is a direct approach to extend the service-temperature range of lithium (Li)-ion batteries (LIBs). In this study, we report such wide-temperature electrolyte formulations by optimizing the ethylene carbonate (EC) content in the ternary solvent system of EC, propylene carbonate (PC), and ethyl methyl carbonate (EMC) with LiPF6 salt and CsPF6 additive. An extended service-temperature range from -40 to 60 °C was obtained in LIBs with lithium nickel cobalt aluminum oxide (LiNi0.80Co0.15Al0.05O2, NCA) as cathode and graphite as anode. The discharge capacities at low temperatures and the cycle life at room temperature and elevated temperatures were systematically investigated together with the ionic conductivity and phase-transition behaviors. The most promising electrolyte formulation was identified as 1.0 M LiPF6 in EC-PC-EMC (1:1:8 by wt) with 0.05 M CsPF6, which was demonstrated in both coin cells of graphite∥NCA and 1 Ah pouch cells of graphite∥LiNi1/3Mn1/3Co1/3O2. This optimized electrolyte enables excellent wide-temperature performances, as evidenced by the high capacity retention (68%) at -40 °C and C/5 rate, significantly higher than that (20%) of the conventional LIB electrolyte, and the nearly identical stable cycle life as the conventional LIB electrolyte at room temperature and elevated temperatures up to 60 °C.

Complete Decomposition of Li2CO3 in Li-O2 Batteries Using Ir/B4C as Noncarbon-Based Oxygen Electrode.

Instability of carbon-based oxygen electrodes and incomplete decomposition of Li2CO3 during charge process are critical barriers for rechargeable Li-O2 batteries. Here we report the complete decomposition of Li2CO3 in Li-O2 batteries using the ultrafine iridium-decorated boron carbide (Ir/B4C) nanocomposite as a noncarbon based oxygen electrode. The systematic investigation on charging the Li2CO3 preloaded Ir/B4C electrode in an ether-based electrolyte demonstrates that the Ir/B4C electrode can decompose Li2CO3 with an efficiency close to 100% at a voltage below 4.37 V. In contrast, the bare B4C without Ir electrocatalyst can only decompose 4.7% of the preloaded Li2CO3. Theoretical analysis indicates that the high efficiency decomposition of Li2CO3 can be attributed to the synergistic effects of Ir and B4C. Ir has a high affinity for oxygen species, which could lower the energy barrier for electrochemical oxidation of Li2CO3. B4C exhibits much higher chemical and electrochemical stability than carbon-based electrodes and high catalytic activity for Li-O2 reactions. A Li-O2 battery using Ir/B4C as the oxygen electrode material shows highly enhanced cycling stability than those using the bare B4C oxygen electrode. Further development of these stable oxygen-electrodes could accelerate practical applications of Li-O2 batteries.

Formation of Reversible Solid Electrolyte Interface on Graphite Surface from Concentrated Electrolytes.

Li-ion batteries (LIB) have been successfully commercialized after the identification of ethylene-carbonate (EC)-containing electrolyte that can form a stable solid electrolyte interphase (SEI) on carbon anode surface to passivate further side reactions but still enable the transportation of the Li+ cation. These electrolytes are still utilized, with only minor changes, after three decades. However, the long-term cycling of LIB leads to continuous consumption of electrolyte and growth of SEI layer on the electrode surface, which limits the battery's life and performance. Herein, a new anode protection mechanism is reported in which, upon changing of the cell potential, the electrolyte components at the electrode-electrolyte interface reorganize reversibly to form a transient protective surface layers on the anode. This layer will disappear after the applied potential is removed so that no permanent SEI layer is required to protect the carbon anode. This phenomenon minimizes the need for a permanent SEI layer and prevents its continuous growth and therefore may lead to largely improved performance for LIBs.

Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries.

LiNi1/3Mn1/3Co1/3O2-layered cathode is often fabricated in the form of secondary particles, consisting of densely packed primary particles. This offers advantages for high energy density and alleviation of cathode side reactions/corrosions, but introduces drawbacks such as intergranular cracking. Here, we report unexpected observations on the nucleation and growth of intragranular cracks in a commercial LiNi1/3Mn1/3Co1/3O2 cathode by using advanced scanning transmission electron microscopy. We find the formation of the intragranular cracks is directly associated with high-voltage cycling, an electrochemically driven and diffusion-controlled process. The intragranular cracks are noticed to be characteristically initiated from the grain interior, a consequence of a dislocation-based crack incubation mechanism. This observation is in sharp contrast with general theoretical models, predicting the initiation of intragranular cracks from grain boundaries or particle surfaces. Our study emphasizes that maintaining structural stability is the key step towards high-voltage operation of layered-cathode materials.

Electrochemically Formed Ultrafine Metal Oxide Nanocatalysts for High-Performance Lithium-Oxygen Batteries.

Lithium-oxygen (Li-O2) batteries have an extremely high theoretical specific energy density when compared with conventional energy-storage systems. However, practical application of the Li-O2 battery system still faces significant challenges. In this work, we report a new approach for synthesis of ultrafine metal oxide nanocatalysts through an electrochemical prelithiation process. This process reduces the size of NiCo2O4 (NCO) particles from 20-30 nm to a uniformly distributed domain of ∼2 nm and significantly improves their catalytic activity. Structurally, the prelithiated NCO nanowires feature ultrafine NiO/CoO nanoparticles that are highly stable during prolonged cycles in terms of morphology and particle size, thus maintaining an excellent catalytic effect to oxygen reduction and evolution reactions. A Li-O2 battery using this catalyst demonstrated an initial capacity of 29 280 mAh g(-1) and retained a capacity of >1000 mAh g(-1) after 100 cycles based on the weight of the NCO active material. Direct in situ transmission electron microscopy observations conclusively revealed the lithiation/delithiation process of as-prepared NCO nanowires and provided in-depth understanding for both catalyst and battery chemistries of transition-metal oxides. This unique electrochemical approach could also be used to form ultrafine nanoparticles of a broad range of materials for catalyst and other applications.

In situ atomic scale visualization of surface kinetics driven dynamics of oxide growth on a Ni-Cr surface.

We report the in situ atomic-scale visualization of the dynamic three-dimensional growth of NiO during the initial oxidation of Ni-10at%Cr using environmental transmission electron microscopy. A step-by-step adatom growth mechanism in 3D is observed and a change in the surface planes of growing oxide islands can be induced by local surface kinetic variations.

Size-Controlled Intercalation-to-Conversion Transition in Lithiation of Transition-Metal Chalcogenides-NbSe3.

Transition-metal chalcogenides (TMCs) can be used either as intercalation cathodes or as conversion-type anodes for lithium ion batteries, for which two distinctively different lithiation reaction mechanisms govern the electrochemical performance of TMCs. However, the factors that control the transition of lithiation mechanisms remain elusive. In this work, we investigated the lithiation process of NbSe3 ribbons using in situ transmission electron microscopy and observed a size-dependent transition from intercalation to the conversion reaction. Large NbSe3 ribbons can accommodate high concentrations of Li(+) through intercalation by relaxing their internal spacing, while lithiation of small NbSe3 ribbons proceeds readily to full conversion. We found that the size-dependent variation of the lithiation mechanism is associated with both Li(+) diffusion in NbSe3 and the accommodation of newly formed phases. For large NbSe3 ribbons, the intercalation-to-conversion transition is impeded by both long-range Li(+) diffusion and large-scale accommodation of volume expansion induced by the formation of new phases. These results demonstrate the inherent structural instability of NbSe3 as an intercalation cathode and its high lithiation rate as a promising conversion-type anode.

In†Situ-Grown ZnCo2O4 on Single-Walled Carbon Nanotubes as Air Electrode Materials for Rechargeable Lithium-Oxygen Batteries.

The development of highly efficient catalysts is critical for the practical application of lithium-oxygen (Li-O2) batteries. Nanosheet-assembled ZnCo2O4 (ZCO) microspheres and thin films grown in situ on single-walled carbon nanotube (ZCO/SWCNT) composites as high-performance air electrode materials for Li-O2 batteries are reported. The in situ grown ZCO/SWCNT electrodes delivered high discharge capacities, decreased the onset of the oxygen evolution reaction by 0.9 V during the charging process, and led to longer cycling stability. These results indicate that in situ grown ZCO/SWCNT composites can be used as highly efficient air electrode materials for oxygen reduction and evolution reactions. The enhanced catalytic activity displayed by the uniformly dispersed ZCO catalyst on nanostructured electrodes is expected to inspire further development of other catalyzed electrodes for Li-O2 batteries and other applications.

Surface Coating Constraint Induced Self-Discharging of Silicon Nanoparticles as Anodes for Lithium Ion Batteries.

One of the key challenges of Si-based anodes for lithium ion batteries is the large volume change upon lithiation and delithiation, which commonly leads to electrochemi-mechanical degradation and subsequent fast capacity fading. Recent studies have shown that applying nanometer-thick coating layers on Si nanoparticle (SiNPs) enhances cyclability and capacity retention. However, it is far from clear how the coating layer function from the point of view of both surface chemistry and electrochemi-mechanical effect. Herein, we use in situ transmission electron microscopy to investigate the lithiation/delithiation kinetics of SiNPs coated with a conductive polymer, polypyrrole (PPy). We discovered that this coating layer can lead to "self-delithiation" or "self-discharging" at different stages of lithiation. We rationalized that the self-discharging is driven by the internal compressive stress generated inside the lithiated SiNPs due to the constraint effect of the coating layer. We also noticed that the critical size of lithiation-induced fracture of SiNPs is increased from ∼150 nm for bare SiNPs to ∼380 nm for the PPy-coated SiNPs, showing a mechanically protective role of the coating layer. These observations demonstrate both beneficial and detrimental roles of the surface coatings, shedding light on rational design of surface coatings for silicon to retain high-power and high capacity as anode for lithium ion batteries.

The Role of Cesium Cation in Controlling Interphasial Chemistry on Graphite Anode in Propylene Carbonate-Rich Electrolytes.

Despite the potential advantages it brings, such as wider liquid range and lower cost, propylene carbonate (PC) is seldom used in lithium-ion batteries because of its sustained cointercalation into the graphene structure and the eventual graphite exfoliation. Here, we report that cesium cation (Cs(+)) directs the formation of solid electrolyte interphase on graphite anode in PC-rich electrolytes through its preferential solvation by ethylene carbonate (EC) and the subsequent higher reduction potential of the complex cation. Effective suppression of PC-decomposition and graphite-exfoliation is achieved by adjusting the EC/PC ratio in electrolytes to allow a reductive decomposition of Cs(+)-(EC)m (1 ≤ m ≤ 2) complex preceding that of Li(+)-(PC)n (3 ≤ n ≤ 5). Such Cs(+)-directed interphase is stable, ultrathin, and compact, leading to significant improvement in battery performances. In a broader context, the accurate tailoring of interphasial chemistry by introducing a new solvation center represents a fundamental breakthrough in manipulating interfacial reactions that once were elusive to control.

In Situ Mass Spectrometric Determination of Molecular Structural Evolution at the Solid Electrolyte Interphase in Lithium-Ion Batteries.

Dynamic structural and chemical evolution at solid-liquid electrolyte interface is always a mystery for a rechargeable battery due to the challenge to directly probe a solid-liquid interface under reaction conditions. We describe the creation and usage of in situ liquid secondary ion mass spectroscopy (SIMS) for the first time to directly observe the molecular structural evolution at the solid-liquid electrolyte interface for a lithium (Li)-ion battery under dynamic operating conditions. We have discovered that the deposition of Li metal on copper electrode leads to the condensation of solvent molecules around the electrode. Chemically, this layer of solvent condensate tends to be depleted of the salt anions and with reduced concentration of Li(+) ions, essentially leading to the formation of a lean electrolyte layer adjacent to the electrode and therefore contributing to the overpotential of the cell. This observation provides unprecedented molecular level dynamic information on the initial formation of the solid electrolyte interphase (SEI) layer. The present work also ultimately opens new avenues for implanting the in situ liquid SIMS concept to probe the chemical reaction process that intimately involves solid-liquid interface, such as electrocatalysis, electrodeposition, biofuel conversion, biofilm, and biomineralization.

Direct in Situ TEM Observation of Modification of Oxidation by the Injected Vacancies for Ni-4Al Alloy Using a Microfabricated Nanopost.

Vacancy injection and selective oxidation of one species in bimetallic alloy at high temperature is a well-known phenomenon. However, detailed understanding of the behavior of the injected vacancies and consequently their effect on oxidation remains elusive. The current research examines the oxidation of high-purity Ni doped with 4.1 at. % Al using in situ transmission electron microscopy (TEM). Experiments are performed on nanoposts fabricated from solution-annealed bulk material that are essentially single crystal samples. Initial oxidation is observed to occur by multisite oxide nucleation, formation of an oxide shell followed by cavity nucleation and growth at the metal/oxide interface. One of the most interesting in situ TEM observations is the formation of a cavity that leads to the faceting of the metal and subsequent oxidation occurring by an atomic ledge migration mechanism on the faceted metal surface. Further, it is directly observed that metal atoms diffuse through the oxide layer to combine with oxygen at the outer surface of the oxide. The present work indicates that injection of vacancies and formation of cavity will lead to a situation where the oxidation rate is essentially controlled by the low surface energy plane of the metal, rather than by the initial terminating plane at the metal surface exposed to the oxidizing environment.

Surface-coating regulated lithiation kinetics and degradation in silicon nanowires for lithium ion battery.

Silicon (Si)-based materials hold promise as the next-generation anodes for high-energy lithium (Li)-ion batteries. Enormous research efforts have been undertaken to mitigate the chemo-mechanical failure due to the large volume changes of Si during lithiation and delithiation cycles. It has been found that nanostructured Si coated with carbon or other functional materials can lead to significantly improved cyclability. However, the underlying mechanism and comparative performance of different coatings remain poorly understood. Herein, using in situ transmission electron microscopy (TEM) through a nanoscale half-cell battery, in combination with chemo-mechanical simulation, we explored the effect of thin (∼5 nm) alucone and Al2O3 coatings on the lithiation kinetics of Si nanowires (SiNWs). We observed that the alucone coating leads to a "V-shaped" lithiation front of the SiNWs, while the Al2O3 coating yields an "H-shaped" lithiation front. These observations indicate that the difference between the Li surface diffusivity and bulk lithiation rate of the coatings dictates lithiation induced morphological evolution in the nanowires. Our experiments also indicate that the reaction rate in the coating layer can be the limiting step for lithiation and therefore critically influences the rate performance of the battery. Further, the failure mechanism of the Al2O3 coated SiNWs was also explored. Our studies shed light on the design of high capacity, high rate and long cycle life Li-ion batteries.

Evolution of lattice structure and chemical composition of the surface reconstruction layer in Li(1.2)Ni(0.2)Mn(0.6)O2 cathode material for lithium ion batteries.

Voltage and capacity fading of layer structured lithium and manganese rich (LMR) transition metal oxide is directly related to the structural and composition evolution of the material during the cycling of the battery. However, understanding such evolution at atomic level remains elusive. On the basis of atomic level structural imaging, elemental mapping of the pristine and cycled samples, and density functional theory calculations, it is found that accompanying the hoping of Li ions is the simultaneous migration of Ni ions toward the surface from the bulk lattice, leading to the gradual depletion of Ni in the bulk lattice and thickening of a Ni enriched surface reconstruction layer (SRL). Furthermore, Ni and Mn also exhibit concentration partitions within the thin layer of SRL in the cycled samples where Ni is almost depleted at the very surface of the SRL, indicating the preferential dissolution of Ni ions in the electrolyte. Accompanying the elemental composition evolution, significant structural evolution is also observed and identified as a sequential phase transition of C2/m → I41 → Spinel. For the first time, it is found that the surface facet terminated with pure cation/anion is more stable than that with a mixture of cation and anion. These findings firmly established how the elemental species in the lattice of LMR cathode transfer from the bulk lattice to surface layer and further into the electrolyte, clarifying the long-standing confusion and debate on the structure and chemistry of the surface layer and their correlation with the voltage fading and capacity decaying of LMR cathode. Therefore, this work provides critical insights for design of cathode materials with both high capacity and voltage stability during cycling.

Realizing the full potential of insertion anodes for Mg-ion batteries through the nanostructuring of Sn.

Magnesium is of great interest as a replacement for lithium in next-generation ion-transfer batteries but Mg-metal anodes currently face critical challenges related to the formation of passivating layers during Mg-plating/stripping and anode-electrolyte-cathode incompatibilities. Alternative anode materials have the potential to greatly extend the spectrum of suitable electrolyte chemistries but must be systematically tailored for effective Mg(2+) storage. Using analytical (scanning) transmission electron microscopy ((S)TEM) and ab initio modeling, we have investigated Mg(2+) insertion and extraction mechanisms and transformation processes in ß-SnSb nanoparticles (NPs), a promising Mg-alloying anode material. During the first several charge-discharge cycles (conditioning), the ß-SnSb particles irreversibly transform into a porous network of pure-Sn and Sb-rich subparticles, as Mg ions replace Sn atoms in the SnSb lattice. After electrochemical conditioning, small Sn particles/grains (<33 ± 20 nm) exhibit highly reversible Mg-storage, while the Sb-rich domains suffer substantial Mg trapping and contribute little to the system performance. This result strongly indicates that pure Sn can act as a high-capacity Mg-insertion anode as theoretically predicted, but that its performance is strongly size-dependent, and stable nanoscale Sn morphologies (<40 nm) are needed for superior, reversible Mg-storage and fast system kinetics.

Bending-induced symmetry breaking of lithiation in germanium nanowires.

From signal transduction of living cells to oxidation and corrosion of metals, mechanical stress intimately couples with chemical reactions, regulating these biological and physiochemical processes. The coupled effect is particularly evident in the electrochemical lithiation/delithiation cycling of high-capacity electrodes, such as silicon (Si), where on the one hand lithiation-generated stress mediates lithiation kinetics and on the other the electrochemical reaction rate regulates stress generation and mechanical failure of the electrodes. Here we report for the first time the evidence on the controlled lithiation in germanium nanowires (GeNWs) through external bending. Contrary to the symmetric core-shell lithiation in free-standing GeNWs, we show bending the GeNWs breaks the lithiation symmetry, speeding up lithaition at the tensile side while slowing down at the compressive side of the GeNWs. The bending-induced symmetry breaking of lithiation in GeNWs is further corroborated by chemomechanical modeling. In the light of the coupled effect between lithiation kinetics and mechanical stress in the electrochemical cycling, our findings shed light on strain/stress engineering of durable high-rate electrodes and energy harvesting through mechanical motion.

In-situ electrochemical transmission electron microscopy for battery research.

The recent development of in-situ liquid stages for (scanning) transmission electron microscopes now makes it possible for us to study the details of electrochemical processes under operando conditions. As electrochemical processes are complex, care must be taken to calibrate the system before any in-situ/operando observations. In addition, as the electron beam can cause effects that look similar to electrochemical processes at the electrolyte/electrode interface, an understanding of the role of the electron beam in modifying the operando observations must also be understood. In this paper we describe the design, assembly, and operation of an in-situ electrochemical cell, paying particular attention to the method for controlling and quantifying the experimental parameters. The use of this system is then demonstrated for the lithiation/delithiation of silicon nanowires.