Microinvasion in hepatocellular carcinoma: predictive factor and application for definition of clinical target volume for radiotherapy.

BACKGROUND: To investigate the correlation between microinvasion and various features of hepatocellular carcinoma (HCC), and to clarify the microinvasion distance from visible HCC lesions to subclinical lesions, so as to provide clinical basis for the expandable boundary of clinical target volume (CTV) from gross tumor volume (GTV) in the radiotherapy of HCC. METHODS: HCC patients underwent hepatectomy of liver cancer in our hospital between July 2019 and November 2021 were enrolled. Data on various features and tumor microinvasion distance were collected. The distribution characteristics of microinvasion distance were analyzed to investigate its potential correlation with various features. Tumor size compared between radiographic and pathologic samples was analyzed to clarify the application of pathologic microinvasion to identify subclinical lesions of radiographic imaging. RESULTS: The average microinvasion distance was 0.6 mm, with 95% patients exhibiting microinvasion distance less than 3.0 mm, and the maximum microinvasion distance was 4.0 mm. A significant correlation was found between microinvasion and liver cirrhosis (P = 0.036), serum albumin level (P = 0.049). Multivariate logistic regression analysis revealed that HCC patients with cirrhosis had a significantly lower risk of microinvasion (OR = 0.09, 95%CI = 0.02 ~ 0.50, P = 0.006). Tumor size was overestimated by 1.6 mm (95%CI=-12.8 ~ 16.0 mm) on radiographic size compared to pathologic size, with a mean %Δsize of 2.96% (95%CI=-0.57%~6.50%). The %Δsize ranged from - 29.03% to 34.78%. CONCLUSIONS: CTV expanding by 5.4 mm from radiographic GTV could include all pathologic microinvasive lesions in the radiotherapy of HCC. Liver cirrhosis was correlated with microinvasion and were independent predictive factor of microinvasion in HCC.

Strain- and Electron Doping-Induced In-Plane Spin Orientation at Room Temperature in Single-Layer CrTe2.

Ferromagnets with a Curie temperature surpassing room temperature (RT) are highly sought after for advancing planar spintronics. The ultrathin CrTe2 is proposed as a promising two-dimensional (2D) ferromagnet with a Curie temperature above 300 K. However, its single-layer film is highly susceptible to specific external perturbations, leading to variable magnetic features depending on the environment. The magnetic ordering of single-layer CrTe2 remains a topic of debate, and experimental confirmation of ferromagnetic order at RT is still pending. In our study, we utilized molecular beam epitaxy to create a single-layer 1T-CrTe2 on bilayer graphene, demonstrating ferromagnetism above 300 K with in-plane magnetization through superconducting quantum interference devices (SQUID) measurements. Our density functional theory (DFT) calculations suggest that the ferromagnetic properties stem from epitaxial strain, which increases the distance between adjacent Cr atoms within the layer by about 1.6% and enhances the Cr-Te-Cr angle by approximately 1.6°. Due to its interaction with the graphene substrate, the magnetic moment transitions from an out-of-plane to an in-plane orientation, while electronic doping exceeds 1.5 e/u.c. Combining DFT calculations with in situ scanning tunneling microscopy (STM) characterizations allowed us to determine the configuration of the CrTe2 single layer on graphene. This discovery presents the first experimental proof of ferromagnetic order in single-layer CrTe2 with a Curie temperature above RT, laying the groundwork for future applications of CrTe2 single-layer-based spintronic devices.

Afterglow Performance of Phenylenevinylene-Based Semiconducting Polymer Nanoparticles Doped with Photosensitizers Containing Electron-Withdrawing Groups.

It is usually believed that doping with photosensitizers capable of generating singlet oxygen (1O2) plays a pivotal role in enhancing the afterglow performance of semiconducting polymer nanoparticles (SPNs). However, the effect of doping photosensitizer bearing electron-withdrawing groups has not been reported. Here we report the effect of doping with six photosensitizers possessing different electron-withdrawing groups on the afterglow performance of SPNs using poly[(9,9-di(2-ethylhexyl)-9H-fluo-rene-2,7-vinylene)-co-(1-methoxy-4-(2-ethylhexyloxy)-2,5-phenylenevinylene)] (PF-MEHPPV) as substrate. It was found that the afterglow performance of SPNs was significantly influenced by doping with photosensitizers bearing electron-withdrawing groups. For the doped photosensitizers with strong electron-withdrawing groups, the stronger the electron-withdrawing ability of the group, the worse of the afterglow performance of the SPN regardless of the 1O2 generation ability of the photosensitizer. When the doped photosensitizer exhibited weak or none electron-withdrawing effect, the 1O2 generation ability of the photosensitizer played a dominant role on the afterglow performance of the SPNs. This work deepens the understanding of the design and synthesis of SPNs with different afterglow properties.

Attributable mortality of acute kidney injury among critically ill patients with sepsis: a multicenter, retrospective cohort study.

BACKGROUND: Sepsis and acute kidney injury (AKI) are common severe diseases in the intensive care unit (ICU). This study aimed to estimate the attributable mortality of AKI among critically ill patients with sepsis and to assess whether AKI was an independent risk factor for 30-day mortality. METHODS: The information we used was derived from a multicenter prospective cohort study conducted in 18 Chinese ICUs, focusing on septic patients post ICU admission. The patients were categorized into two groups: those who developed AKI (AKI group) within seven days following a sepsis diagnosis and those who did not develop AKI (non-AKI group). Using propensity score matching (PSM), patients were matched 1:1 as AKI and non-AKI groups. We then calculated the mortality rate attributable to AKI in septic patients. Furthermore, a survival analysis was conducted comparing the matched AKI and non-AKI septic patients. The primary outcome of interest was the 30-day mortality rate following the diagnosis of sepsis. RESULTS: Out of the 2175 eligible septic patients, 61.7% developed AKI. After the application of PSM, a total of 784 septic patients who developed AKI were matched in a 1:1 ratio with 784 septic patients who did not develop AKI. The overall 30-day attributable mortality of AKI was 6.6% (95% CI 2.3 ∼ 10.9%, p = 0.002). A subgroup analysis revealed that the 30-day attributable mortality rates for stage 1, stage 2, and stage 3 AKI were 0.6% (95% CI -5.9 ∼ 7.2%, p = 0.846), 4.7% (95% CI -3.1 ∼ 12.4%, p = 0.221) and 16.8% (95% CI 8.1 ∼ 25.2%, p < 0.001), respectively. Particularly noteworthy was that stage 3 AKI emerged as an independent risk factor for 30-day mortality, possessing an adjusted hazard ratio of 1.80 (95% CI 1.31 ∼ 2.47, p < 0.001). CONCLUSIONS: The overall 30-day attributable mortality of AKI among critically ill patients with sepsis was 6.6%. Stage 3 AKI had the most significant contribution to 30-day mortality, while stage 1 and stage 2 AKI did not increase excess mortality.

Attributable mortality of ARDS among critically ill patients with sepsis: a multicenter, retrospective cohort study.

BACKGROUND: Both sepsis and acute respiratory distress syndrome (ARDS) are common severe diseases in the intensive care unit (ICU). There is no large-scale multicenter study to clarify the attributable mortality of ARDS among septic patients. This study aimed to evaluate the excess mortality of ARDS in critically ill patients with sepsis. METHODS: The data were obtained from a multicenter, prospective cohort study in 18 Chinese ICUs between January 2014 and August 2015. The study population was septic patients after ICU admission. The patients were categorized into two groups: those who developed ARDS (ARDS group) within seven days following a sepsis diagnosis and those who did not develop ARDS (non-ARDS group). Applying propensity score matching (PSM), patients were matched 1:1 as ARDS and non-ARDS groups. Mortality attributed to ARDS was calculated. Subsequently, we conducted a survival analysis to estimate the impact of ARDS on mortality. The primary endpoint was 30-day mortality after sepsis diagnosis. RESULTS: 2323 septic patients were eligible, 67.8% developed ARDS. After PSM, 737 patients with ARDS were matched 1:1 with 737 non-ARDS patients. ARDS's overall 30-day attributable mortality was 11.9% (95% CI 7.5-16.3%, p < 0.001). Subgroup analysis showed that the 30-day attributable mortality of mild, moderate, and severe ARDS was 10.5% (95% CI 4.0-16.8%, p < 0.001), 11.6% (95% CI 4.7-18.4%, p < 0.001) and 18.1% (95% CI 4.5-30.9%, p = 0.006), respectively. ARDS was an independent risk factor for 30-day mortality, with adjusted hazard ratios of 1.30 (95% CI 1.03-1.64, p = 0.027), 1.49 (95% CI 1.20-1.85, p < 0.001), and 1.95 (95% CI 1.51-2.52, p < 0.001) for mild, moderate, and severe ARDS, respectively. CONCLUSIONS: The overall 30-day attributable mortality of ARDS among critically ill patients with sepsis was 11.9%. Compared with mild and moderate ARDS, severe ARDS contributed more to death. ARDS was significantly associated with an increase in the 30-day mortality.

Probe-Type Multi-Core Fiber Optic Sensor for Simultaneous Measurement of Seawater Salinity, Pressure, and Temperature.

In this article, we propose and demonstrate a probe-type multi-core fiber (MCF) sensor for the multi-parameter measurement of seawater. The sensor comprises an MCF and two capillary optical fibers (COFs) with distinct inner diameters, in which a 45° symmetric core reflection (SCR) structure and a step-like inner diameter capillary (SIDC) structure filled with polydimethylsiloxane (PDMS) are fabricated at the fiber end. The sensor is equipped with three channels for different measurements. The surface plasmon resonance (SPR) channel (CHSPR) based on the side-polished MCF is utilized for salinity measurement. The fiber end air cavity, forming the Fabry-Pérot interference (FPI) channel (CHFPI), is utilized for pressure and temperature measurement. Additionally, the fiber Bragg grating (FBG) channel (CHFBG), which is inscribed in the central core, serves as temperature compensation for the measurement results. By combining three sensing principles with space division multiplexing (SDM) technology, the sensor overcomes the common challenges faced by multi-parameter sensors, such as channel crosstalk and signal demodulation difficulties. The experimental results indicate that the sensor has sensitivities of 0.36 nm/‱, -10.62 nm/MPa, and -0.19 nm/°C for salinity, pressure, and temperature, respectively. As a highly integrated and easily demodulated probe-type optical fiber sensor, it can serve as a valuable reference for the development of multi-parameter fiber optic sensors.

Fe3O4@TiO2 Microspheres: Harnessing O2 Release and ROS Generation for Combination CDT/PDT/PTT/Chemotherapy in Tumours.

In the treatment of various cancers, photodynamic therapy (PDT) has been extensively studied as an effective therapeutic modality. As a potential alternative to conventional chemotherapy, PDT has been limited due to the low Reactive Oxygen Species (ROS) yield of photosensitisers. Herein, a nanoplatform containing mesoporous Fe3O4@TiO2 microspheres was developed for near-infrared (NIR)-light-enhanced chemodynamical therapy (CDT) and PDT. Titanium dioxide (TiO2) has been shown to be a very effective PDT agent; however, the hypoxic tumour microenvironment partly affects its in vivo PDT efficacy. A peroxidase-like enzyme, Fe3O4, catalyses the decomposition of H2O2 in the cytoplasm to produce O2, helping overcome tumour hypoxia and increase ROS production in response to PDT. Moreover, Fe2+ in Fe3O4 could catalyse H2O2 decomposition to produce cytotoxic hydroxyl radicals within tumour cells, which would result in tumour CDT. The photonic hyperthermia of Fe3O4@TiO2 could not only directly damage the tumour but also improve the efficiency of CDT from Fe3O4. Cancer-killing effectiveness has been maximised by successfully loading the chemotherapeutic drug DOX, which can be released efficiently using NIR excitation and slight acidification. Moreover, the nanoplatform has high saturation magnetisation (20 emu/g), making it suitable for magnetic targeting. The in vitro results show that the Fe3O4@TiO2/DOX nanoplatforms exhibited good biocompatibility as well as synergetic effects against tumours in combination with CDT/PDT/PTT/chemotherapy.

Dual Factor-Loaded Artificial Periosteum Accelerates Bone Regeneration.

In the clinic, inactivation of osteosarcoma using microwave ablation would damage the periosteum, resulting in frequent postoperative complications. Therefore, the development of an artificial periosteum is crucial for postoperative healing. In this study, we prepared an artificial periosteum using silk fibroin (SF) loaded with stromal cell-derived factor-1α (SDF-1α) and calcitonin gene-related peptide (CGRP) to accelerate bone remodeling after the microwave ablation of osteosarcoma. The prepared artificial periosteum showed a sustained release of SDF-1α and CGRP after 14 days of immersion. In vitro culture of rat periosteal stem cells (rPDSCs) demonstrated that the artificial periosteum is favorable for cell recruitment, the activity of alkaline phosphatase, and bone-related gene expression. Furthermore, the artificial periosteum improved the tube formation and angiogenesis-related gene expression of human umbilical vein endothelial cells (HUVECs). In an animal study, the periosteum in the femur of a rabbit was inactivated through microwave ablation and then removed. The damaged periosteum was replaced with the as-prepared artificial periosteum and favored bone regeneration. In all, the designed dual-factor-loaded artificial periosteum is a promising strategy to replace the damaged periosteum in the therapy of osteosarcoma for a better bone-rebuilding process.

MGP+ and IDO1+ tumor-associated macrophages facilitate immunoresistance in breast cancer revealed by single-cell RNA sequencing.

Immunotherapy is widely applied for the treatment of breast cancer, but to which some patients respond poorly or develop resistance. Therefore, the mechanism needs to be further studied. Transcriptomic data of 31 breast cancer patients treated with anti-programmed death receptor 1 (PD-1) was downloaded from the VIB-KULeuven Center for Cancer Biology to analyze the changes in myeloid cells in tumor tissues before and after immunotherapy. And 24 cell populations that may be immune-related were further identified. Representative cell populations were also screened and validated through cellular and animal experiments to evaluate the relevant molecular expression and pathways of tumor-associated macrophages (TAMs) in the tumor microenvironment. The results demonstrated that MGP+ TAMs and IDO1+ TAMs influenced the efficacy of immunotherapy in breast cancer patients. After anti-PD-1 treatment, Increased numbers of MGP+ TAMs and IDO1+ TAMs in breast cancer patients upregulated pro-tumorigenic factors associated with resistance to immunosuppressive therapy. This study provides new biomarkers for immunotherapy to predict therapeutic responses and overcome potential resistance to immunotherapy. It is an important complement to the immunosuppression caused by TAMs after immunotherapy for breast cancer.

Low pressure reversibly driving colossal barocaloric effect in two-dimensional vdW alkylammonium halides.

Plastic crystals as barocaloric materials exhibit the large entropy change rivalling freon, however, the limited pressure-sensitivity and large hysteresis of phase transition hinder the colossal barocaloric effect accomplished reversibly at low pressure. Here we report reversible colossal barocaloric effect at low pressure in two-dimensional van-der-Waals alkylammonium halides. Via introducing long carbon chains in ammonium halide plastic crystals, two-dimensional structure forms in (CH3-(CH2)n-1)2NH2X (X: halogen element) with weak interlayer van-der-Waals force, which dictates interlayer expansion as large as 13% and consequently volume change as much as 12% during phase transition. Such anisotropic expansion provides sufficient space for carbon chains to undergo dramatic conformation disordering, which induces colossal entropy change with large pressure-sensitivity and small hysteresis. The record reversible colossal barocaloric effect with entropy change ΔSr ~ 400 J kg-1 K-1 at 0.08 GPa and adiabatic temperature change ΔTr ~ 11 K at 0.1 GPa highlights the design of novel barocaloric materials by engineering the dimensionality of plastic crystals.

Enhancing immune modulation and bone regeneration on titanium implants by alleviating the hypoxic microenvironment and releasing bioactive ions.

Bone implantation inevitably causes damage to surrounding vasculature, resulting in a hypoxic microenvironment that hinders bone regeneration. Although titanium (Ti)-based devices are widely used as bone implants, their inherent bioinert surface leads to poor osteointegration. Herein, a strontium peroxide (SrO2)-decorated Ti implant, Ti_P@SrO2, was constructed through coating with poly-L-lactic acid (PLLA) to alleviate the hypoxic microenvironment and transform the bioinert surface of the implant into a bioactive surface. PLLA degradation resulted in an acidic microenvironment and the release of SrO2 nanoparticles. The acidic microenvironment then accelerated the decomposition of SrO2, resulting in the release of O2 and Sr ions. O2 released from Ti_P@SrO2 can alleviate the hypoxic microenvironment, thus enhancing cell proliferation in an O2-insufficient microenvironment. Furthermore, under hypoxic and normal microenvironments, Ti_P@SrO2 enhanced alkaline phosphatase activity and bone-related gene expression in C3H10T1/2 cells with the continuous release of Sr ions. Meanwhile, Ti_P@SrO2 suppressed M1 polarization and promoted M2 polarization of bone marrow-derived monocytes under hypoxic and normal conditions. Furthermore, in a rat implantation model, the implant enhanced new bone formation and improved osteointegration after modification with SrO2. In summary, the newly designed O2- and Sr ion-releasing Ti implants are promising for applications in bone defects.

Reuleaux triangle core fiber with triple rotational symmetry.

A Reuleaux triangle core fiber (RTF) with triple rotational symmetry is proposed and fabricated. Then the RTF is twisted to form the chiral fiber grating, which converts the core mode into a vortex mode containing 3rd-order orbital angular momentum (OAM). Based on the Fourier expansion of the core boundary, the straight-sided and arc-sided triangular core profiles were analyzed, revealing the mechanism of high-efficiency OAM3 generation. The experimental results show a 3rd-order vortex mode with a high conversion efficiency and purity, and the polarization-independent characteristics endowed by the core shape are also confirmed. The proposed RTF provides a new, to the best of our knowledge, way for higher-order vortex beam generation, which can be used in optical fiber communication systems with OAM multiplexing.

Unidirectional coupled chiral fiber grating.

We investigate a unidirectional coupled chiral fiber grating (UCFG) with both helical refractive index (RI) and loss modulation. The two modulations form a π/2 phase difference in the fiber cross-sectional azimuth angle, which "breaks" the mode coupled reciprocity of the forward and backward propagation. The forward propagation fundamental mode coupling is forbidden, while the backward propagation fundamental mode is coupled to the vortex mode. A simulation model based on the beam propagation method (BPM) is utilized to confirm the unidirectional coupling. Using the coupled mode analysis, we find that the key to the coupling difference lies in the non-Hermitian coupling matrix. In addition, the UCFG design involving mixed modulation is also discussed. The UCFG demonstrates its potential as a passive vortex beam generator, filter, and detector, with a transmittance difference of up to 30 dB between the coupled and uncoupled vortex modes.

CD63+ cancer-associated fibroblasts confer CDK4/6 inhibitor resistance to breast cancer cells by exosomal miR-20.

Cyclin-dependent kinase 4 (CDK4) and CDK6 inhibitors (CDK4/6i) have rapidly received Food and Drug Administration (FDA) approval as a new type of therapy for patients with advanced hormone receptor-positive breast cancer. However, with the widespread application of CDK4/6i, drug resistance has become a new challenge for clinical practice and has greatly limited the treatment effect. Here, the whole microenvironment landscape of ER+ breast cancer tumors was revealed through single-cell RNA sequencing, and a specific subset of cancer-associated fibroblasts (CD63+ CAFs) was identified as highly enriched in CDK4/6i resistant tumor tissues. Then, we found that CD63+ CAFs can distinctly promote resistance to CDK4/6i in breast cancer cells and tumor xenografts. In addition, it was discovered that miR-20 is markedly enriched in the CD63+ CAFs-derived exosomes, which are used to communicate with ER+ breast cancer cells, leading to CDK4/6i resistance. Furthermore, exosomal miR-20 could directly target the RB1 mRNA 3'UTR and negatively regulate RB1 expression to decrease CDK4/6i sensitivity in breast cancer cells. Most importantly, we designed and synthesized cRGD-miR-20 sponge nanoparticles and found that they can enhance the therapeutic effect of CDK4/6i in breast cancer. In summary, our findings reveal that CD63+ CAFs can promote CDK4/6i resistance via exosomal miR-20, which induces the downregulation of RB1 in breast cancer cells, and suggest that CD63+ CAFs may be a novel therapeutic target to enhance CDK4/6i sensitivity.

Limited value of platelet-related markers in diagnosing periprosthetic joint infection.

OBJECTIVE: To evaluate the diagnostic values of serum platelet count (PC), mean platelet volume ratio (MPV), platelet count to mean platelet volume ratio (PVR), platelet to lymphocyte ratio (PLR), platelet to neutrophil ratio (PNR), PC/Albumin-globulin ratio (PC/AGR), and PC/C-reactive protein (PC/ CRP) in the diagnosis of periprosthetic joint infection (PJI). METHODS: The medical records were retrospectively analyzed of the 158 patients who had undergone hip or knee revisions from January 2018 to May 2022. Of them, 79 cases were diagnosed with PJI and 79 with aseptic loosening (AL). PJI was defined using the Musculoskeletal Infection Society criteria. The plasma levels of CRP, the erythrocyte sedimentation rate (ESR), PC, MPV, PVR, PLR, PNR, PC/AGR, and PC/CRP in the 2 groups were recorded and analyzed. In addition, tests were performed according to different joint types. The receiver operating characteristic curve was used to calculate the sensitivity and specificity of each indicator. The diagnostic value for each indicator was calculated according to the area under the curve (AUC). RESULTS: The PC, PVR, PLR and PC/AGR levels in the PJI group were significantly higher than those in the AL group, while PC/CRP levels were significantly lower (P < 0.001). The AUC for PC/CRP, and PC/AGR was 0.804 and 0.802, respectively, which were slightly lower than that of CRP (0.826) and ESR (0.846). ROC analysis for PC/CRP, and PC/AGR revealed a cut-off value of 37.80 and 160.63, respectively, which provided a sensitivity of 73.42% and 84.81% and a specificity of 75.95% and 65.82% for PJI. The area under the curve of PLR and PC was 0.738 and 0.702. The area under the curve values for PVR, PNR, and MPV were 0.672, 0.553, and 0.544, respectively. CONCLUSIONS: The results of this study suggest that PC, PLR, PC/CRP, and PC/AGR values do not offer significant advantages over ESR or CRP values when employed for the diagnosis of PJI. PVR, PNR, and MPV were not reliable in the diagnosis of PJI.

Implantable bioelectrodes: challenges, strategies, and future directions.

Implantable bioelectrodes for regulating and monitoring biological behaviors have become indispensable medical devices in modern healthcare, alleviating pathological symptoms such as epilepsy and arrhythmia, and assisting in reversing conditions such as deafness and blindness. In recent years, developments in the fields of materials science and biomedical engineering have contributed to advances in research on implantable bioelectrodes. However, the foreign body reaction (FBR) is still a major constraint for the long-term application of electrodes. In this paper, four types of commonly used implantable bioelectrodes are reviewed, concentrating on their background, development, and a series of complications caused by FBR after long-term implantation. Strategies for resisting FBRs are then devised in terms of physics, chemistry, and nanotechnology. We analyze the major trends in the future development of implantable bioelectrodes and outline some promising research to optimize the long-term operational stability of electrodes. Although current implantable bioelectrodes have been able to achieve good biocompatibility, low impedance, and low mechanical mismatch and trauma, these devices still face the challenge of FBR. Resistance to FBR is still the key for the long-term effectiveness of bioelectrodes, and a better understanding of the mechanisms of FBR, as well as miniaturization, long-term passivation, and coupling with gene therapy may be the way forward for the next generation of implantable bioelectrodes.

Gibberellin promotes cambium reestablishment during secondary vascular tissue regeneration after girdling in an auxin-dependent manner in Populus.

Secondary vascular tissue (SVT) development and regeneration are regulated by phytohormones. In this study, we used an in vitro SVT regeneration system to demonstrate that gibberellin (GA) treatment significantly promotes auxin-induced cambium reestablishment. Altering GA content by overexpressing or knocking down ent-kaurene synthase (KS) affected secondary growth and SVT regeneration in poplar. The poplar DELLA gene GIBBERELLIC ACID INSENSITIVE (PtoGAI) is expressed in a specific pattern during secondary growth and cambium regeneration after girdling. Overexpression of PtoGAI disrupted poplar growth and inhibited cambium regeneration, and the inhibition of cambium regeneration could be partially restored by GA application. Further analysis of the PtaDR5:GUS transgenic plants, the localization of PIN-FORMED 1 (PIN1) and the expression of auxin-related genes found that an additional GA treatment could enhance the auxin response as well as the expression of PIN1, which mediates auxin transport during SVT regeneration. Taken together, these findings suggest that GA promotes cambium regeneration by stimulating auxin signal transduction.

Facet-Dependent Charge Density of Serpentine: Nanoscopic Implications for Aggregation and Entrainment of Fine Particles.

Deciphering the facet-dependent surface properties of clay minerals holds vital significance in both fundamental research and practical engineering applications. To date, the anisotropic local charge density of serpentine surfaces still remains elusive, and thus, the interaction energies and associated aggregate structures between different crystal planes of serpentine cannot be quantitatively determined. In this work, different crystal planes of serpentine (i.e., SiO basal, MgOH basal, and edge) were selectively exposed, and their surface potentials and charge densities were determined using atomic force microscopy (AFM) force measurements coupled with Derjaguin-Landau-Verwey-Overbeek (DLVO) theory fitting. The SiO and edge planes consistently exhibited a permanently negative surface charge, whereas the point of zero charge (PZC) on the MgOH plane was estimated to be pH 9.0-11.0. Based on the interaction energy calculation between different serpentine planes, the aggregation structures of serpentine were predicted. Combined with scanning electron microscopy observation of freeze-dried samples, SiO-MgOH and MgOH-edge associations were found to dominate the aggregate structures at pH ≤ 9.0, thereby resulting in a stacking or "card-houses" structures. In contrast, all of the plane associations exhibited the repulsive interaction energy at pH 11.0, which led to a completely dispersed system, ultimately causing the most severe fine particle entrainment during froth flotation. Our work provides quantitative clarification of facet-dependent surface properties and aggregate structures of serpentine under different pH conditions, which will help improve the fundamental understanding of colloidal behaviors of clay minerals.

High-order mixed vortex beam generator.

A mixed multi-order vortex beam generator, based on a Reuleaux triangle core fiber chiral grating (RCFG), is proposed. The triangular perturbation and off-axis effects induced by core shape, result in the simultaneous coupling of the core mode with the 1st- and 3rd-order vortex modes. To the best of our knowledge, this is the first time that a mixed vortex beam was generated in a single chiral fiber. The phase matching conditions required for the co-coupling of multi-order vortex beams are analyzed based on the coupled mode theory. Additionally, a cladding shrinkage method is proposed to flexibly adjust the co-coupling wavelength. We found that the key to co-coupling lies in balancing the different order perturbations of the Reuleaux triangle core fiber (RTF). The proposed method offers a new approach for the design of mixed multi-order vortex beam generators, with potential applications in fields such as fiber OAM communications, optical tweezers, and super-resolution imaging.

A review of flotation reagents for bastnäsite-(Ce) rare earth ore.

Given the indispensability and immense value of rare earth elements for scientific and technological advancements in the 21st century, extracting high-quality rare earth resources from nature has become a global priority. Bastnäsite-(Ce) is one of the known rare earth minerals with high rare earth content and wide distribution, which occupies a pivotal position in human life and high-end production activities, making its efficient development and utilization crucial. In recent years, research on separating bastnäsite-(Ce) from gangue minerals has focused on the flotation process, with flotation reagents playing a critical role in achieving effective separation. This paper provides a detailed summary of current research on the behavior of bastnäsite-(Ce) flotation agents on minerals, their interaction with mineral surfaces during flotation separation, and outlines future prospects for further research.