Cushioning mechanism of the metatarsals during landing for the skateboarding ollie maneuver.

Skateboarding is an Olympic event with frequent jumping and landing, where the cushioning effect by the foot structure (from the arch, metatarsals, etc.) and damping performance by sports equipment (shoes, insoles, etc.) can greatly affect an athlete's sports performance and lower the risk of limb injury. Skateboarding is characterized by the formation of a "man-shoe-skateboard system," which makes its foot cushioning mechanism different from those of other sports maneuvers, such as basketball vertical jump and gymnastics broad jump. Therefore, it is necessary to clarify the cushioning mechanism of the foot structure upon landing on a skateboard. To achieve this, a multibody finite element model of the right foot, shoe, and skateboard was created using Mimics, Geomagic, and ANSYS. Kinetic data from the ollie maneuver were used to determine the plantar pressure and Achilles tendon force at three characteristics (T1, T2, and T3). The stress and strain on the foot and metatarsals (MT1-5) were then simulated. The simulation results had an error of 6.98% compared to actual measurements. During landing, the force exerted on the internal soft tissues tends to increase. The stress and strain variations were highest on MT2, MT3, and MT4. Moreover, the torsion angle of MT1 was greater than those of the other metatarsals. Additionally, the displacements of MT2, MT3, and MT4 were higher than those of the other parts. This research shows that skateboarders need to absorb the ground reaction force through the movements of the MTs for ollie landing. The soft tissues, bones, and ligaments in the front foot may have high risks of injury. The developed model serves as a valuable tool for analyzing the foot mechanisms in skateboarding; furthermore, it is crucial to enhance cushioning for the front foot during the design of skateboard shoes to reduce potential injuries.

Investigation of the Mechanical Response of the Foot Structure Considering Push-Off Angles in Speed Skating.

The push-off angle is an important factor affecting speed-skating performance. However, quantitative evidence for the relationship between the push-off angle and foot injury is incomplete. This study aimed to establish a three-dimensional (3D) finite element model (FEM) and investigate the mechanical responses of foot structures to stress and strain to explore the relationship between injury and movement. A 3D FEM was reconstructed using CT and 3D scan data and validated by comparing the FEM-predicted and in vivo measurement data in the balanced standing state. A push-off angle obtained from a video of a champion was loaded into the FEM. The error rates of validation were less than 10%. With a decrease in the push-off angle, the stress on the metatarsal increased; the stress on the talus, ankle joint cartilage and plantar fascia decreased, as did the strain on the ankle joint cartilage and plantar fascia. The FEM was considered reasonable. Not all foot structures had an increased risk of injury with a decrease in the push-off angle from 70° to 42°. The FEM established in this study provides a possibility for further determining and quantifying the relationship between foot injury and skating technique.

Effects of Midsole Hardness on the Mechanical Response Characteristics of the Plantar Fascia during Running.

High long-term stress on the plantar fascia (PF) is the main cause of plantar fasciitis. Changes in the midsole hardness (MH) of running shoes are an important factor leading to the alteration of the PF. This study aims to establish a finite-element (FE) model of the foot-shoe, and investigates the effects of midsole hardness on PF stress and strain. The FE foot-shoe model was built in ANSYS using computed-tomography imaging data. Static structural analysis was used to simulate the moment of running push and stretch. Plantar stress and strain under different MH levels were quantitatively analyzed. A complete and valid 3D FE model was established. With an increase in MH from 10 to 50 Shore A, the overall stress and strain of the PF were decreased by approximately 1.62%, and the metatarsophalangeal (MTP) joint flexion angle was decreased by approximately 26.2%. The height of the arch descent decreased by approximately 24.7%, but the peak pressure of the outsole increased by approximately 26.6%. The established model in this study was effective. For running shoes, increasing the MH reduces the stress and strain of PF, but also imposes a higher load on the foot.

Characteristics of complete chloroplast genome of a high-quality forage on Qinghai-Tibet Plateau, Medicago archiducis-nicolai Sirj. (Fabaceae：Trifolieae).

Medicago archiducis-nicolai Sirj. is a well-known high-quality forage as its good palatability and strong tolerance to drought, cold and saline-alkali stress. Here, the complete chloroplast genome sequence of M. archiducis-nicolai was reported. The size of the complete chloroplast genome is 127,072 bp in length. The chloroplast genome has no inverted repeat (IR) regions, which is very common in the family Fabaceae. The M. archiducis-nicolai chloroplast genome encodes 106 genes: 72 protein-coding genes, 30 tRNAs, and 4 rRNAs. The phylogenetic analysis result strongly suggested that M. archiducis-nicolai is a distinct lineage in Medicago, being sister to highly supported clade composed of three species (M. hybrida, M. papillosa and M. sativa).

Complete chloroplast genome of a high-quality forage in north China, Medicago ruthenica (Fabaceae：Trifolieae).

Medicago ruthenica is a well-known high-quality forage due to its good palatability and strong tolerance to drought, cold and saline-alkali stress. Here, the complete chloroplast genome sequence of M. ruthenica was reported. The chloroplast genome is 126,939 bp in length. This chloroplast genome has no inverted repeat (IR) regions, which is very common in the family Fabaceae. The M. ruthenica chloroplast genome encodes 107 genes, including 73 protein-coding genes, 30 tRNA genes, and 4 rRNA genes. Phylogenetic analysis result strongly suggested that M. ruthenica is a distinct lineage in Medicago, being sister to highly supported clade composed of three species (M. hybrida, M. papillosa and M. sativa).

Assessment of a protein cocktail-based skin test for bovine tuberculosis in a double-blind field test in cattle.

Bovine tuberculosis (bTB) is a worldwide zoonosis caused mainly by Mycobacterium bovis. The traditional diagnostic method used often is the tuberculin skin test, which uses bovine purified protein derivatives (PPD-B). However, it is difficult to maintain uniformity of PPD-B from batch to batch, and it shares common antigens with nonpathogenic environmental mycobacteria. To overcome these problems, M. bovis-specific antigens that showed good T cell stimulation, such as CFP-10, ESAT-6, Rv3615c, etc., have been used in the skin test, but there have been no large-scale clinical studies on these antigens. In this study, two combinations (CFP-10/ESAT-6/TB10.4 protein cocktail and CFP-10/ESAT-6/Rv3872/MPT63 protein cocktail) were developed and used as stimuli in the skin test. Cattle were double-blind tested to assess the efficiency of the protein cocktail-based skin tests. The results showed that the CFP-10/ESAT-6/TB10.4 protein cocktail-based skin test can differentiate TB-infected cattle from Mycobacterium avium-infected ones and that it shows a high degree of agreement with the traditional tuberculin skin test (κ = 0.8536) and gamma interferon (IFN-γ) release assay (κ = 0.8154). Compared to the tuberculin skin test, the relative sensitivity and relative specificity of the CFP-10/ESAT-6/TB10.4-based skin test were 87% and 97%, respectively., The relative sensitivity and relative specificity of the CFP-10/ESAT-6/TB10.4-based skin test were 93% and 92%, respectively, on comparison with the IFN-γ release assay. The correlation between the increases in skin thickness observed after the inoculation of stimuli was high (PPD-B versus CFP-10/ESAT-6/TB10.4, Spearman r of 0.8435). The correlation between the optical density at 450 nm (OD450) obtained after blood stimulation with PPD-B and the increase in skin thickness observed after inoculation of the CFP-10/ESAT-6/TB10.4 protein cocktail was high (Spearman r = 0.7335). Therefore, the CFP-10/ESAT-6/TB10.4-based skin test responses correlate to traditional measures of bovine TB evaluation, including skin test and gamma interferon release assay.