Solvent-Driven Room-Temperature Curtius Rearrangements to Access Nucleotides Bearing Substituted Fused Pyridones.

The intramolecular Curtius rearrangement suffers from a high reaction temperature, low yields, tedious product isolation, and difficult scale up. This study presents a room-temperature Curtius rearrangement that can be novelly driven by the HFIP solvent, followed by light-illuminated intramolecular cyclization. Such a mild reaction allows for the preparation of various fused pyridone derivatives with diverse substituent groups that have rarely been incorporated by previous methods. The roles of HFIP and light are investigated by a set of control experiments through a combination of IR and NMR titration. Furthermore, using the substituted fused pyridones as unnatural bases, we can obtain a panel of new nucleotides.

Hydrophobic polyethylene film prepared by film blowing process for preservation of fried shrimp rolls.

Hydrophobic coatings have wide applications, but face challenges in food flexible packaging in terms of poor adhesion and inadequate wear resistance. Health hazards and poor adhesion drive the search for novel hydrophobic coatings substitutes. Here, we introduced rationally synthesized carnauba wax-SiO2 microspheres as a component to composite polyethylene (PE) film construction, and created a wear-resistant hydrophobic composite PE film via the blown film technique. The resultant hydrophobic composite film demonstrated an enhanced water contact angle from 86° to above 100°, coupled with favorable mechanical properties such as wear resistance, tensile strength and effective barrier performance against water vapor and oxygen. Upon implementation in the preservation of a Cantonese delicacy, Chaoshan fried shrimp rolls, it was observed that at 25 °C, the carnauba wax-SiO2-PE composite packaging film extended the shelf life of the product by 3 days compared to pure PE film.

Optimizing enzyme properties to enhance dihydroxyacetone production via methylglyoxal biosensor development.

BACKGROUND: Dihydroxyacetone (DHA) stands as a crucial chemical material extensively utilized in the cosmetics industry. DHA production through the dephosphorylation of dihydroxyacetone phosphate, an intermediate product of the glycolysis pathway in Escherichia coli, presents a prospective alternative for industrial production. However, insights into the pivotal enzyme, dihydroxyacetone phosphate dephosphorylase (HdpA), remain limited for informed engineering. Consequently, the development of an efficient tool for high-throughput screening of HdpA hypermutants becomes imperative. RESULTS: This study introduces a methylglyoxal biosensor, based on the formaldehyde-responding regulator FrmR, for the selection of HdpA. Initial modifications involved the insertion of the FrmR binding site upstream of the -35 region and into the spacer region between the -10 and -35 regions of the constitutive promoter J23110. Although the hybrid promoter retained constitutive expression, expression of FrmR led to complete repression. The addition of 350 µM methylglyoxal promptly alleviated FrmR inhibition, enhancing promoter activity by more than 40-fold. The methylglyoxal biosensor system exhibited a gradual increase in fluorescence intensity with methylglyoxal concentrations ranging from 10 to 500 µM. Notably, the biosensor system responded to methylglyoxal spontaneously converted from added DHA, facilitating the separation of DHA producing and non-producing strains through flow cytometry sorting. Subsequently, the methylglyoxal biosensor was successfully applied to screen a library of HdpA mutants, identifying two strains harboring specific mutants 267G > T and D110G/G151C that showed improved DHA production by 68% and 114%, respectively. Expressing of these two HdpA mutants directly in a DHA-producing strain also increased DHA production from 1.45 to 1.92 and 2.29 g/L, respectively, demonstrating the enhanced enzyme properties of the HdpA mutants. CONCLUSIONS: The methylglyoxal biosensor offers a novel strategy for constructing genetically encoded biosensors and serves as a robust platform for indirectly determining DHA levels by responding to methylglyoxal. This property enables efficiently screening of HdpA hypermutants to enhance DHA production.

Arabidopsis ribosomal RNA processing meerling mutants exhibit suspensor-derived polyembryony due to direct reprogramming of the suspensor.

Embryo development in Arabidopsis (Arabidopsis thaliana) starts off with an asymmetric division of the zygote to generate the precursors of the embryo proper and the supporting extraembryonic suspensor. The suspensor degenerates as the development of the embryo proper proceeds beyond the heart stage. Until the globular stage, the suspensor maintains embryonic potential and can form embryos in the absence of the developing embryo proper. We report a mutant called meerling-1 (mrl-1), which shows a high penetrance of suspensor-derived polyembryony due to delayed development of the embryo proper. Eventually, embryos from both apical and suspensor lineages successfully develop into normal plants and complete their life cycle. We identified the causal mutation as a genomic rearrangement altering the promoter of the Arabidopsis U3 SMALL NUCLEOLAR RNA-ASSOCIATED PROTEIN 18 (UTP18) homolog that encodes a nucleolar-localized WD40-repeat protein involved in processing 18S pre-ribosomal RNA. Accordingly, root-specific knockout of UTP18 caused growth arrest and accumulation of unprocessed 18S pre-rRNA. We generated the mrl-2 loss-of-function mutant and observed asynchronous megagametophyte development causing embryo sac abortion. Together, our results indicate that promoter rearrangement decreased UTP18 protein abundance during early-stage embryo proper development, triggering suspensor-derived embryogenesis. Our data support the existence of non-cell autonomous signaling from the embryo proper to prevent direct reprogramming of the suspensor towards embryonic fate.

Abnormal expression of CUX1 influences autophagy activation in paroxysmal nocturnal hemoglobinuria.

The mechanism underlying autophagy in paroxysmal nocturnal hemoglobinuria (PNH) remains largely unknown. We previously sequenced the entire genome exon of the CD59- cells from 13 patients with PNH and found genes such as CUX1 encoding Cut-like homeobox 1. Peripheral blood samples from 9 patients with PNH and 7 healthy control subjects were obtained to measure CUX1 expression. The correlation between CUX1 messenger RNA expression and PNH clinical indicators was analyzed. To simulate CUX1 expression in patients with PNH, we generated a panel of PNH cell lines by knocking out PIGA in K562 cell lines and transfected lentivirus with CUX1. CCK-8 and EDU assay assessed cell proliferation. Western blotting was used to detect Beclin-1, LC3A, LC3B, ULK1, PI3K, AKT, p-AKT, mTOR, and p-mTOR protein levels. Autophagosomes were observed with transmission electron microscopy. Chloroquine was used to observe CUX1 expression in PNH after autophagy inhibition. Leukocytes from patients with PNH had lower levels of CUX1 messenger RNA expression and protein content than healthy control subjects. The lactose dehydrogenase level and the percentage of PNH clones were negatively correlated with CUX1 relative expression. We reduced CUX1 expression in a PIGA knockout K562 cell line, leading to increased cell proliferation. Levels of autophagy markers Beclin-1, LC3B, LC3A, and ULK1 increased, and autophagosomes increased. Furthermore, PI3K/AKT/mTOR protein phosphorylation levels were lower. CUX1 expression did not change and cell proliferation decreased in CUX1 knocked down PNH cells after inhibition of autophagy by chloroquine. In brief, CUX1 loss-of-function mutation resulted in stronger autophagy in PNH.

Impacts of the aerosol mixing state and new particle formation on CCN in summer at the summit of Mount Tai (1534m) in Central East China.

In this study, the aerosol size distributions, cloud condensation nuclei (CCN) number concentration (NCCN), single-particle chemical composition and meteorological data were collected from May 12 to June 8, 2017, at the summit of Mt. Tai. The effects of new particle formation (NPF) events and aerosol chemical components on CCN at Mt. Tai were analyzed in detail. The results showed that, NPF events significantly enhanced the CCN population, and the enhancement effect increased with increasing supersaturation (SS) value at Mt.Tai. NCCN at SS ranging from 0.1 to 0.9 % on NPF days was 10.9 %, 36.5 %, 44.6 %, 53.5 % and 51.5 % higher than that on non-NPF days from 10:00-13:00 as NPF events progressed. The effect of chemical components on CCN activation under the influence of NPF events was greater than that in the absence of NPF events. The correlation coefficients of EC-Nitrate particles (EC-Sulfate particles) and CCN at all SS levels on NPF days were 1.31-1.59 times (1.17-1.35 times) higher than those on non-NPF days. Nitrate particles promoted CCN activation but sulfate particles inhibited activation at Mt. Tai. There are differences or even opposite effects of the same group of particles on CCN activation under the influence of NPF events in different air masses. EC-Sulfate particles inhibited CCN activation at all SS levels for type I but weakly promoted activation at lower SS ranging from 0.1 to 0.3 % and weakly inhibited it at higher 0.9 % SS for type II. OCEC particles significantly inhibited CCN activation for type II, and this effect decreased with increasing SS. OCEC particles only weakly inhibited activation at SS ranging from 0.5 to 0.7 % for type I. OCEC particles only weakly inhibited this process at 0.1 % SS, while they very weakly promoted activation for SS > 0.1 %. This reveals that the CCN activity is not only related to the chemical composition of the particles, but the mixing state also has an important effect on the CCN activity.

MTTLm6A: A multi-task transfer learning approach for base-resolution mRNA m6A site prediction based on an improved transformer.

N6-methyladenosine (m6A) is a crucial RNA modification involved in various biological activities. Computational methods have been developed for the detection of m6A sites in Saccharomyces cerevisiae at base-resolution due to their cost-effectiveness and efficiency. However, the generalization of these methods has been hindered by limited base-resolution datasets. Additionally, RMBase contains a vast number of low-resolution m6A sites for Saccharomyces cerevisiae, and base-resolution sites are often inferred from these low-resolution results through post-calibration. We propose MTTLm6A, a multi-task transfer learning approach for base-resolution mRNA m6A site prediction based on an improved transformer. First, the RNA sequences are encoded by using one-hot encoding. Then, we construct a multi-task model that combines a convolutional neural network with a multi-head-attention deep framework. This model not only detects low-resolution m6A sites, it also assigns reasonable probabilities to the predicted sites. Finally, we employ transfer learning to predict base-resolution m6A sites based on the low-resolution m6A sites. Experimental results on Saccharomyces cerevisiae m6A and Homo sapiens m1A data demonstrate that MTTLm6A respectively achieved area under the receiver operating characteristic (AUROC) values of 77.13% and 92.9%, outperforming the state-of-the-art models. At the same time, it shows that the model has strong generalization ability. To enhance user convenience, we have made a user-friendly web server for MTTLm6A publicly available at http://47.242.23.141/MTTLm6A/index.php.

Aptamer-Based fluorescent DNA biosensor in antibiotics detection.

The inappropriate employment of antibiotics across diverse industries has engendered profound apprehensions concerning their cumulative presence within human bodies and food commodities. Consequently, many nations have instituted stringent measures limiting the admissible quantities of antibiotics in food items. Nonetheless, conventional techniques employed for antibiotic detection prove protracted and laborious, prompting a dire necessity for facile, expeditious, and uncomplicated detection methodologies. In this regard, aptamer-based fluorescent DNA biosensors (AFBs) have emerged as a sanguine panacea to surmount the limitations of traditional detection modalities. These ingenious biosensors harness the binding prowess of aptamers, singular strands of DNA/RNA, to selectively adhere to specific target antibiotics. Notably, the AFBs demonstrate unparalleled selectivity, affinity, and sensitivity in detecting antibiotics. This comprehensive review meticulously expounds upon the strides achieved in AFBs for antibiotic detection, particularly emphasizing the labeling modality and the innovative free-label approach. It also elucidates the design principles behind a diverse array of AFBs. Additionally, a succinct survey of signal amplification strategies deployed within these biosensors is provided. The central objective of this review is to apprise researchers from diverse disciplines of the contemporary trends in AFBs for antibiotic detection. By doing so, it aspires to instigate a concerted endeavor toward the development of heightened sensitivity and pioneering AFBs, thereby contributing to the perpetual advancement of antibiotic detection methodologies.

Programmable Electro-Assembly of Collagen: Constructing Porous Janus Films with Customized Dual Signals for Immunomodulation and Tissue Regeneration in Periodontitis Treatment.

Currently available guided bone regeneration (GBR) films lack active immunomodulation and sufficient osteogenic ability- in the treatment of periodontitis, leading to unsatisfactory treatment outcomes. Challenges remain in developing simple, rapid, and programmable manufacturing methods for constructing bioactive GBR films with tailored biofunctional compositions and microstructures. Herein, the controlled electroassembly of collagen under the salt effect is reported, which enables the construction of porous films with precisely tunable porous structures (i.e., porosity and pore size). In particular, bioactive salt species such as the anti-inflammatory drug diclofenac sodium (DS) can induce and customize porous structures while enabling the loading of bioactive salts and their gradual release. Sequential electro-assembly under pre-programmed salt conditions enables the manufacture of a Janus composite film with a dense and DS-containing porous layer capable of multiple functions in periodontitis treatment, which provides mechanical support, guides fibrous tissue growth, and acts as a barrier preventing its penetration into bone defects. The DS-containing porous layer delivers dual bio-signals through its morphology and the released DS, inhibiting inflammation and promoting osteogenesis. Overall, this study demonstrates the potential of electrofabrication as a customized manufacturing platform for the programmable assembly of collagen for tailored functions to adapt to specific needs in regenerative medicine.

Gekko Coil System for Intracranial Aneurysms Treatment in China (GREAT-China): A Prospective Randomized Controlled Open-Label Noninferiority Trial.

OBJECTIVE: This study aimed to evaluate the safety and efficacy of the Gekko coil system in treating intracranial aneurysms (IAs) in clinical practice. METHODS: A prospective multicenter randomized open-label parallel positive control noninferiority trial was conducted by 11 centers in China. Patients with a target IA were randomized 1:1 to coiling with either Gekko or Axium coils. The primary outcome was successful aneurysm occlusion at 6 months postoperative follow-up, whereas the secondary outcomes included the successful occlusion aneurysm rate in the immediate postoperative period, recanalization rate at the 6 months follow-up, and technical success and security. RESULTS: Between May 2018 and September 2020, 256 patients were enrolled and randomized. Per-protocol analysis showed that the successful aneurysm occlusion rate at 6 months was 96.08% for the Gekko coil group compared with 96.12% in the Axium coil group, with a difference of -0.04% (P = 0.877). The successful immediate aneurysm occlusion rates were 86.00% and 77.45% in the Gekko coil group and the Axium coil group, respectively, showing no significant difference between the 2 groups (P = 0.116), whereas the recanalization rates during the 6 months follow-up were 2.02% and 1.96% in the Gekko and Axium coil groups, respectively, which was not statistically significant (P = 1.000). CONCLUSIONS: This trial showed that the Gekko coil system was noninferior to the Axium coil system in terms of efficacy and safety for IA embolization. In clinical practice, the Gekko coil system can be considered safe and effective for treating patients with IA.

MSCAN: multi-scale self- and cross-attention network for RNA methylation site prediction.

BACKGROUND: Epi-transcriptome regulation through post-transcriptional RNA modifications is essential for all RNA types. Precise recognition of RNA modifications is critical for understanding their functions and regulatory mechanisms. However, wet experimental methods are often costly and time-consuming, limiting their wide range of applications. Therefore, recent research has focused on developing computational methods, particularly deep learning (DL). Bidirectional long short-term memory (BiLSTM), convolutional neural network (CNN), and the transformer have demonstrated achievements in modification site prediction. However, BiLSTM cannot achieve parallel computation, leading to a long training time, CNN cannot learn the dependencies of the long distance of the sequence, and the Transformer lacks information interaction with sequences at different scales. This insight underscores the necessity for continued research and development in natural language processing (NLP) and DL to devise an enhanced prediction framework that can effectively address the challenges presented. RESULTS: This study presents a multi-scale self- and cross-attention network (MSCAN) to identify the RNA methylation site using an NLP and DL way. Experiment results on twelve RNA modification sites (m6A, m1A, m5C, m5U, m6Am, m7G, Ψ, I, Am, Cm, Gm, and Um) reveal that the area under the receiver operating characteristic of MSCAN obtains respectively 98.34%, 85.41%, 97.29%, 96.74%, 99.04%, 79.94%, 76.22%, 65.69%, 92.92%, 92.03%, 95.77%, 89.66%, which is better than the state-of-the-art prediction model. This indicates that the model has strong generalization capabilities. Furthermore, MSCAN reveals a strong association among different types of RNA modifications from an experimental perspective. A user-friendly web server for predicting twelve widely occurring human RNA modification sites (m6A, m1A, m5C, m5U, m6Am, m7G, Ψ, I, Am, Cm, Gm, and Um) is available at http://47.242.23.141/MSCAN/index.php . CONCLUSIONS: A predictor framework has been developed through binary classification to predict RNA methylation sites.

microRNA-622 upregulates cell cycle process by targeting FOLR2 to promote CRC proliferation.

BACKGROUND: Epigenetic alterations contribute greatly to the development and progression of colorectal cancer, and effect of aberrant miR-622 expression is still controversial. This study aimed to discover miR-622 regulation in CRC proliferation. METHODS: miR-622 expression and prognosis were analyzed in clinical CRC samples from Nanfang Hospital. miR-622 regulation on cell cycle and tumor proliferation was discovered, and FOLR2 was screened as functional target of miR-622 using bioinformatics analysis, which was validated via dual luciferase assay and gain-of-function and loss-of-function experiments both in vitro and in vivo. RESULTS: miR-622 overexpression in CRC indicated unfavorable prognosis and it regulated cell cycle to promote tumor growth both in vitro and in vivo. FOLR2 is a specific, functional target of miR-622, which negatively correlates with signature genes in cell cycle process to promote CRC proliferation. CONCLUSIONS: miR-622 upregulates cell cycle process by targeting FOLR2 to promote CRC proliferation, proposing a novel mechanism and treatment target in CRC epigenetic regulation of miR-622.

Sex pheromone biosynthesis in the sugarcane borer Diatraea saccharalis: paving the way for biotechnological production.

BACKGROUND: The sugarcane borer Diatraea saccharalis (Lepidoptera) is a key pest on sugarcane and other grasses in the Americas. Biological control as well as insecticide treatments are used for pest management, but economic losses are still significant. The use of female sex pheromones for mating disruption or mass trapping in pest management could be established for this species, provided that economical production of pheromone is available. RESULTS: Combining in vivo labelling studies, differential expression analysis of transcriptome data and functional characterisation of insect genes in a yeast expression system, we reveal the biosynthetic pathway and identify the desaturase and reductase enzymes involved in the biosynthesis of the main pheromone component (9Z,11E)-hexadecadienal, and minor components hexadecanal, (9Z)-hexadecenal and (11Z)-hexadecenal. We next demonstrate heterologous production of the corresponding alcohols of the pheromone components, by expressing multiple steps of the biosynthetic pathway in yeast. CONCLUSION: Elucidation of the genetic basis of sex pheromone biosynthesis in D. saccharalis, and heterologous expression in yeast, paves the way for biotechnological production of the pheromone compounds needed for pheromone-based pest management of this species. © 2023 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Flow diverter tail malapposition after implantation in the internal carotid artery for aneurysm treatment: a preliminary study.

Background and purpose: Favorable wall apposition of a flow diverter (FD) is essential for the treatment of intracranial aneurysms. The irretrievability and final drop point uncertainty of the proximal tail of the FD increase the difficulty of achieving good tail apposition. Therefore, understanding the factors associated with FD tail malapposition would be helpful for clinical practice. Methods: A total of 153 patients with 161 FD deployments in the carotid artery between 2020 and 2023 were retrospectively collected from our center's database for this study. Patient demographics, aneurysm characteristics, FDs, carotid artery anatomy, periprocedural complications, discharge modified Rankin scale (MRS) scores, and follow-up outcomes were investigated by comparing patients with and without FD tail malapposition. Comparisons were made with t tests or Kruskal-Wallis tests for continuous variables and the Pearson χ2 or Fisher exact test for categorical variables. Logistic regression was conducted to determine the predictors of malapposition. Results: Tail malapposition occurred for 41 out of the 161 FDs (25.5%). Univariate analysis revealed that the FD brand, FD length, FD distal to proximal vessel diameter ratio, FD tail position (straight or curved), and curvature of the vessel curve were significantly associated with FD tail malapposition (p < 0.05). Further multivariate analysis demonstrated that the application of a surpass FD (p = 0.04), the FD distal to proximal vessel diameter ratio (p = 0.022), the FD tail position (straight or curved) (p < 0.001) and the curvature of the vessel curve (p < 0.001) were factors significantly associated with FD tail malapposition. No significant difference was found in periprocedural or follow-up outcomes. The classification of FD tail malapposition was determined from imaging. The two major patterns of FD tail malapposition are unattached tails and protrusive tails. Conclusion: FD tail malapposition might be associated with a larger FD distal to the proximal vessel diameter difference, a curved vessel where the FD tail is located, and a larger curvature of the vessel curve. FD tail malapposition can be classified into unattached tails and protrusive tails, which have their own characteristics and should be noted in clinical practice.

Podocyte Infolding Glomerulopathy: A Special Morphology of Podocyte Injury Caused by Heterogeneous Diseases.

Introduction: Podocyte infolding glomerulopathy (PIG) is a newly recognized rare glomerular injury. The clinical significance and mechanism of this injury pattern remains unclear. Methods: We conducted a retrospective study of renal biopsies from January 2018 to December 2020 in Kingmed Diagnostics. The renal biopsy features and clinical data were reviewed. Laser scanning microdissection and mass spectrometry (LMD/MS) was conducted to analyze the potential mechanism. Results: A total of 116 (0.092%) out of 126,086 biopsies were diagnosed as PIG during the period. Of these, 89 (76.7%) cases were found to have PIG coexisting with immune-complex associated glomerulonephritis (IC-PIG) whereas 27 (23.3%) were identified as isolated PIG without immunoglobulin or complement deposition. Systemic lupus erythematosus (SLE), especially with membranous lupus nephritis (LN), was diagnosed in most (70.8%) IC-PIG cases. Of the isolated PIG cases, 51.9% had no known underlying conditions; however, a relatively high positive rate (42.1%) of antinuclear antibody (ANA) was detected. Nearly half (47.5%) of the patients presented with nephrotic syndrome (NS). PIG grade was associated with proteinuria in isolated PIG (P = 0.035). LMD/MS revealed dysregulated cytoskeletal protein α-actinin4 (ACTN4) and tubulin beta-4 chain in PIG compared with normal donor kidney and minimal change disease (MCD). The displacement of ACTN4 into the glomerular basement membrane (GBM) was confirmed by the confocal microscope. Conclusion: PIG is a rare podocyte injury that can exist alone without underlying disease or be concurrent with various diseases, especially SLE. Podocyte cytoskeletal protein ACTN4 and tubulin beta-4 chain were dysregulated, which may be involved in the mechanism of PIG.

Validation of a training system for laparoscopic longitudinal suturing in lesion.

BACKGROUND: A training system that allows the trainee to perform laparoscopic suturing in a realistic environment and measures the force applied to the tissue would be invaluable. This study aims to establish the construct and content validity of the training system we developed for the objective assessment of surgeons' skills. METHODS: Ten novices, 6 residents, and 6 experts performed the suturing and knot-tying task using the training system. Ten force-related parameters were used to analyse the system's construct validity. Experts were invited to evaluate the content validity with questionnaires. RESULTS: Eight parameters showed significant differences between the three groups. The construct validity results demonstrated that the system could distinguish the tissue handling ability of operators. The experts agreed that the system had excellent content validity with an average score of 4.71/5. CONCLUSIONS: The training system is likely valid for surgical training. It can realistically simulate surgical scenarios and evaluate the tissue handling ability of trainees.

Genome-wide meta-analysis and fine-mapping prioritize potential causal variants and genes related to leprosy.

To date, genome-wide association studies (GWASs) have discovered 35 susceptible loci of leprosy; however, the cumulative effects of these loci can only partially explain the overall risk of leprosy, and the causal variants and genes within these loci remain unknown. Here, we conducted out new GWASs in two independent cohorts of 5007 cases and 4579 controls and then a meta-analysis in these newly generated and multiple previously published (2277 cases and 3159 controls) datasets were performed. Three novel and 15 previously reported risk loci were identified from these datasets, increasing the known leprosy risk loci of explained genetic heritability from 23.0 to 38.5%. A comprehensive fine-mapping analysis was conducted, and 19 causal variants and 14 causal genes were identified. Specifically, manual checking of epigenomic information from the Epimap database revealed that the causal variants were mainly located within the immune-relevant or immune-specific regulatory elements. Furthermore, by using gene-set, tissue, and cell-type enrichment analyses, we highlighted the key roles of immune-related tissues and cells and implicated the PD-1 signaling pathways in the pathogenetic mechanism of leprosy. Collectively, our study identified candidate causal variants and elucidated the potential regulatory and coding mechanisms for genes associated with leprosy.

Discovery of Potential Antituberculosis Agents Targeted Methionine Aminopeptidase 1 of Mycobacterium tuberculosis by the Developed Fluorescent Probe.

Tuberculosis (TB) is a chronic systemic infectious disease caused by Mycobacterium tuberculosis (M. tuberculosis). Methionine aminopeptidase 1 (MtMET-AP1) is a hydrolase that mediates the necessary post-translational N-terminal methionine excision (NME) of peptides during protein synthesis, which is necessary for bacterial proliferation and is a potential target for the treatment of tuberculosis. Based on the functional characteristics of MtMET-AP1, we developed an enzymatic activated near-infrared fluorescent probe DDAN-MT for rapid, highly selective, and real-time monitoring of endogenous MtMET-AP1 activity in M. tuberculosis. Using the probe DDAN-MT, a visually high-throughput screening technique was established, which obtained three potential inhibitors (GSK-J4 hydrochchloride, JX06, and lavendustin C) against MtMET-AP1 from a 2560 compounds library. More importantly, these inhibitors could inhibit the growth of M. tuberculosis H37Ra especially (MICs < 5 µM), with low toxicities on intestinal bacteria strains and human cells. Therefore, the visual sensing of MtMET-AP1 was successfully performed by DDAN-MT, and MtMET-AP1 inhibitors were discovered as potential antituberculosis agents.

Growth and Local Structures of Single Crystalline Flakes of Three-Dimensional Covalent Organic Frameworks in Water.

Due to the enormous chemical and structural diversities and designable properties and functionalities, covalent organic frameworks (COFs) hold great promise as tailored materials for industrial applications in electronics, biology, and energy technologies. They were typically obtained as partially crystalline materials, although a few single-crystal three-dimensional (3D) COFs have been obtained recently with structures probed by diffraction techniques. However, it remains challenging to grow single-crystal COFs with controlled morphology and to elucidate the local structures of 3D COFs, imposing severe limitations on the applications and understanding of the local structure-property correlations. Herein, we develop a method for designed growth of five types of single crystalline flakes of 3D COFs with controlled morphology, front crystal facets, and defined edge structures as well as surface chemistry using surfactants that can be self-assembled into layered structures to confine crystal growth in water. The flakes enable direct observation of local structures including monomer units, pore structure, edge structure, grain boundary, and lattice distortion of 3D COFs as well as gradually curved surfaces in kinked but single crystalline 3D COFs with a resolution of up to ∼1.7 Å. In comparison with flakes of two-dimensional crystals, the synthesized flakes show much higher chemical, mechanical, and thermal stability.