Achieving high-capacity aqueous supercapacitors via anion-doped construction of dual redox centers in NixCo1-xSeO3.

In asymmetric supercapacitors, transition metal selenates are promising electrodes, but their capacity are limited by a single redox center. To further enhance the performance of transition metal selenates, NixCo1-xSeO3 (NCSeO) doped with N and Cl was prepared on nickel-plated carbon cloth (NCSeO-NCl-NiCC). During electrochemical reactions, NCSeO can be converted to M(OH)2 (M = Ni/Co) and OH- is replaced by N and Cl. Two redox centers, M(OH)2/MOOH and M(OH)xN2-x/NO3-, are formed during charging and discharging, which is attributed to the increased capacity of the NCSeO-NCl-NiCC electrode. On NCSeO, the substitution of Cl facilitates the regulation of the electronic structure and enhances the stability of N-doping. The optimised electrode exhibits a high capacity of 417 mA h g-1 at 1 A g-1 and an impressive rate capability of 235 mA h g-1 at 50 A g-1. Asymmetric supercapacitors with this design have an ultra-high energy density of 73.6 W h kg-1, as well as an excellent rate and cycling performance with a capacitance retention of 97.8% after 20 000 cycles at a current density of 20 A g-1.

Multi-Functional Nano-Doped Hollow Fiber from Microfluidics for Sensors and Micromotors.

Nano-doped hollow fiber is currently receiving extensive attention due to its multifunctionality and booming development. However, the microfluidic fabrication of nano-doped hollow fiber in a simple, smooth, stable, continuous, well-controlled manner without system blockage remains challenging. In this study, we employ a microfluidic method to fabricate nano-doped hollow fiber, which not only makes the preparation process continuous, controllable, and efficient, but also improves the dispersion uniformity of nanoparticles. Hydrogel hollow fiber doped with carbon nanotubes is fabricated and exhibits superior electrical conductivity (15.8 S m-1), strong flexibility (342.9%), and versatility as wearable sensors for monitoring human motions and collecting physiological electrical signals. Furthermore, we incorporate iron tetroxide nanoparticles into fibers to create magnetic-driven micromotors, which provide trajectory-controlled motion and the ability to move through narrow channels due to their small size. In addition, manganese dioxide nanoparticles are embedded into the fiber walls to create self-propelled micromotors. When placed in a hydrogen peroxide environment, the micromotors can reach a top speed of 615 µm s-1 and navigate hard-to-reach areas. Our nano-doped hollow fiber offers a broad range of applications in wearable electronics and self-propelled machines and creates promising opportunities for sensors and actuators.

An oriented tube array porous carbon anode prepared using a self-blowing mold of salt templates for high-rate potassium storage.

Porous carbon materials with oriented porosity are very useful in ion batteries, but their high cost and complex fabrication hinder their wide application. In this paper, we used cheap and water-soluble NaHCO3 grains to prepare unique porous carbon with an orderly arranged tube array via one-step carbonization. During the preparation process, a novel self-blowing mold of salt templates was discovered for the first time, and the resulting numerous high-speed gas jets can act as gas state templates to induce the formation of the oriented porous carbon into a mesoscale tube array with rich micropores. Besides, the amount of CO functional groups has been enhanced greatly by the chemical activation of H2O and CO2 derived from the decomposition of NaHCO3, which can improve the reversible specific capacity of the electrode by forming a C-O-K compound with potassium. Thanks to the coupling effect of the hierarchical porous structure with an orderly tube array and rich CO functional groups, the obtained porous carbon materials exhibited excellent kinetics and impressive rate capability as the anode of potassium-ion batteries (PIBs) with high capacities of 209 mA h g-1 at 10 A g-1 and 156 mA h g-1 at 30 A g-1. This work not only provides a facile, green, sustainable approach to fabricating novel carbon materials, but also demonstrates the promising prospect of oriented porous carbon in exploring advanced electrode materials for PIBs.

Office hysteroscopy to guide intrauterine device hook use for the removal of a deeply embedded intrauterine device.

Office hysteroscopy is a common examination method in gynecological clinics. In most cases, it can only be examined but not treated. Here, we present our specific technique used office hysteroscope to guide intrauterine device (IUD) hook in the removal of deeply embedded IUD which provided direct visualization and sufficient force.

Multifunctional Iron Selenate Sheath of Fe-Based Anode Achieving High-Rate Capacity-Durability Combination of Aqueous Hybrid Energy Storage Devices.

The introduction of battery-type cathode has been commonly considered a preferred approach to boost the energy density of aqueous hybrid energy storage devices (AHESDs) in alkalic systems, but AHESDs with both high energy density and power density are rare due to the great challenge in designing battery-type anode materials with high rate and durability comparable to capacitive-type carbon anodes. In this paper, a well-hydrated iron selenate (FeSeO) sheath is constructed around FeOOH nanorods by a facile electrochemical activation, demonstrating the unique multifunction in fasting charge diffusion, promoting the dissociation of H2O, and inhibiting the irreversible phase transition of FeOOH to inert γ-Fe2O3, which endow the hydrated sheath coated Fe-based anodes with an impressive rate capability and superior durability. Thanks to the comprehensive performance of this Fe-based anode, the assembled AHESD delivered a high energy density of 117 Wh kg-1 with the extraordinary durability of almost 100% capacity retention after 40 000 cycles. Even at an ultrahigh power density of 27 000 W kg-1, an impressive energy density of 65 Wh kg-1 can be achieved, which rivals previously reported energy-storage devices.

Bioinspired Multifunctional Self-Sensing Actuated Gradient Hydrogel for Soft-Hard Robot Remote Interaction.

The development of bioinspired gradient hydrogels with self-sensing actuated capabilities for remote interaction with soft-hard robots remains a challenging endeavor. Here, we propose a novel multifunctional self-sensing actuated gradient hydrogel that combines ultrafast actuation and high sensitivity for remote interaction with robotic hand. The gradient network structure, achieved through a wettability difference method involving the rapid precipitation of MoO2 nanosheets, introduces hydrophilic disparities between two sides within hydrogel. This distinctive approach bestows the hydrogel with ultrafast thermo-responsive actuation (21° s-1) and enhanced photothermal efficiency (increase by 3.7 °C s-1 under 808 nm near-infrared). Moreover, the local cross-linking of sodium alginate with Ca2+ endows the hydrogel with programmable deformability and information display capabilities. Additionally, the hydrogel exhibits high sensitivity (gauge factor 3.94 within a wide strain range of 600%), fast response times (140 ms) and good cycling stability. Leveraging these exceptional properties, we incorporate the hydrogel into various soft actuators, including soft gripper, artificial iris, and bioinspired jellyfish, as well as wearable electronics capable of precise human motion and physiological signal detection. Furthermore, through the synergistic combination of remarkable actuation and sensitivity, we realize a self-sensing touch bioinspired tongue. Notably, by employing quantitative analysis of actuation-sensing, we realize remote interaction between soft-hard robot via the Internet of Things. The multifunctional self-sensing actuated gradient hydrogel presented in this study provides a new insight for advanced somatosensory materials, self-feedback intelligent soft robots and human-machine interactions.

Precise integration of large DNA sequences in plant genomes using PrimeRoot editors.

A technique for chromosomal insertion of large DNA segments is much needed in plant breeding and synthetic biology to facilitate the introduction of desired agronomic traits and signaling and metabolic pathways. Here we describe PrimeRoot, a genome editing approach to generate targeted precise large DNA insertions in plants. Third-generation PrimeRoot editors employ optimized prime editing guide RNA designs, an enhanced plant prime editor and superior recombinases to enable precise large DNA insertions of up to 11.1 kilobases into plant genomes. We demonstrate the use of PrimeRoot to accurately introduce gene regulatory elements in rice. In this study, we also integrated a gene cassette comprising PigmR, which confers rice blast resistance driven by an Act1 promoter, into a predicted genomic safe harbor site of Kitaake rice and obtain edited plants harboring the expected insertion with an efficiency of 6.3%. We found that these rice plants have increased blast resistance. These results establish PrimeRoot as a promising approach to precisely insert large segments of DNA in plants.

MdbHLH93 confers drought tolerance by activating MdTyDC expression and promoting dopamine biosynthesis.

Dopamine and its biosynthesis-limiting enzyme tyrosine decarboxylase (TyDC) play a vital part in mediating plant growth and the response to drought stress. However, the underlying molecular mechanism remains poorly understood. Here, drought stress markedly induced the expression of Malus domestica bHLH93 (MdbHLH93), the apple basic helix-loop-helix transcription factor. Moreover, MdbHLH93 directly bound to the Malus domestica TyDC (MdTyDC) promoter and positively regulated its expression, which resulted in dopamine synthesis and enhanced drought tolerance. Furthermore, the additive effect of overexpressing MdbHLH93 and MdTyDC simultaneously promoted dopamine synthesis and drought tolerance in apples, while the interference of MdbHLH93 inhibited this effect, indicating that MdTyDC-regulated dopamine synthesis and drought tolerance were positively regulated by MdbHLH93. Taken together, these findings suggest the positive regulation of dopamine accumulation by MdbHLH93 through its transcriptional regulation of MdTyDC and show that increased dopamine content confers drought tolerance in apples.

Endometrium procurement and transplantation restores fertility in rats.

RESEARCH QUESTION: Can rat endometrium be successfully procured and transplanted, and can a similar method be used to procure human endometrium? DESIGN: Rat endometrium was procured using an endometrium stripping method and transplanted into female Sprague-Dawley rats. Macroscopic and histological changes, endometrial receptivity-related protein concentrations and fertility were assessed. Additionally, a preliminary experiment was conducted to procure human endometrium using a similar method. RESULTS: Endometrium was successfully procured from both rats and humans, which contained intact endometrium and parts of the adjacent inner annulus myometrium. Endometrium auto-transplantation was conducted in rats and the procedure lasted a total of 41.3 ± 5.7 min with a mean blood loss of 0.09 ± 0.04 g. The transplanted endometrium survived well, but a fibrotic zone formed between the transplant and recipient tissue. Compared with sham rats, those with endometrium transplantation had similar endometrial thickness and endometrial gland numbers but reduced vascular density at 8 weeks after surgery. Endometrium transplantation also retained expression of the endometrial receptivity-related proteins leukaemia inhibitory factor and vascular endothelial growth factor. In contrast to non-pregnancy in the stripped horn, a mean of 5.0 ± 2.7 fetuses developed in the transplanted horn, and full-term live fetuses were conceived in the horns with transplanted endometrium. CONCLUSIONS: Endometrium procurement by stripping method can obtain an intact and functional endometrium, and endometrium transplantation can reconstruct the uterine cavity and restore fertility in rats.

Speed behaviour and mental workload of small-spacing expressway interchanges based on field driving test.

Many small-spacing interchanges (SSI) appear with the improvement of the expressway network. To investigate the speed and mental workload characteristics in the SSI and acquire the mechanism of the influence of speed on the drivers' workload, 37 participants were recruited to perform a field driving test. Each driver performed four driving conditions (i.e. ramp-mainline, mainline-ramp, mainline driving, and auxiliary lane driving). The speed and drivers' electrocardiogram (ECG) data were collected using SpeedBox speed acquisition equipment and PhysioLAB physiological instrument. The heart rate increase (HRI) index was used to analyse the drivers' mental workload regularity. The relationship model between speed and HRI was developed to examine the impact of speed on HRI. The results show that the speed variation in the SSI displayed two patterns: 'decrease - increase and continuous decrease.' The drivers' HRI variation presented four patterns: 'convex curve, continuously increasing, continuously decreasing and concave curve'. SSI's influenced area length is given based on the speed and HRI variation regularity. HRI is significantly higher when driving in the ramp-mainline condition in the SSI than when driving in other conditions, indicating that drivers are more nervous when merging with the mainline traffic. HRI increases significantly in the first 50% of the weaving area in four driving conditions, indicating that vehicle weaving greatly influences the drivers' mental workload. A positive correlation exists between vehicle speed and drivers' HRI without interference from other vehicles and road alignment.

The shorter spacing of the interchange will result in a more difficult driving task for the drivers. This study shows that drivers have the highest mental workload in ramp-mainline driving condition at small-spacing interchanges. The first half of the weaving area is the area where drivers' mental workload increases significantly, and is a high-risk section for small-spacing interchanges. This study can provide a reference for the revision of the allowable minimum interchange spacing in the corresponding specification, and the calibration of the simulation test parameters for similar scenarios.

Physical Activity, Sedentary Behavior, and Osteoarthritis: A Two-Sample Mendelian Randomization Analysis.

Background: Sedentary behavior and physical activity are still ambiguous in their effects on osteoarthritis. We aimed to evaluate the effects of physical activity and sedentary behavior on osteoarthritis to provide a reference for the prevention of osteoarthritis. Methods: This study was conducted in Changchun, China in 2022. We used two-sample Mendelian randomization with the SNP as an instrumental variable to investigate the effect of physical activity and sedentary behavior on osteoarthritis. In addition, a two-step Mendelian randomization method was used to test whether mediating factors (BMI, smoking, Apolipoprotein B) were involved in mediating the effects of exposure factors on osteoarthritis. Results: TV watching was causally related to knee osteoarthritis and spine osteoarthritis, and they were positively correlated (knee osteoarthritis: OR=1.162,95 %CI: 1.027-1.315, P=0.017; spine osteoarthritis: OR=1.208,95 %CI: 1.033-1.413, P=0.018). BMI played a mediating role in the process of TV watching with knee osteoarthritis and spine osteoarthritis. ((The proportion of BMI mediating effect: knee osteoarthritis: 47.1% (95% CI: 36.7%~63.2%); spine osteoarthritis: 29.5% (95% CI: 19.3%~40.8%)). The proportion of Smoking mediating effect in the process of TV watching with spine osteoarthritis was 16.1% (95% CI: 3.7% ~ 31.6%). Conclusion: TV watching is a potential risk factor for osteoarthritis and plays a role through modifiable factors such as BMI and smoking, therefore, interventions on these factors have the potential to reduce the burden of osteoarthritis caused by longer TV watching times.

Identifying Crucial Biomarkers in Osteoporosis and Ulcerative Colitis Through Bioinformatics Analysis of Co-expressed Genes.

Osteoporosis (OP) and ulcerative colitis (UC), prevalent immune diseases, exert a substantial socioeconomic impact globally. This study identifies biomarkers for these diseases, paving the way for in-depth research. Initially, the Gene Expression Omnibus (GEO) database was employed to analyze datasets GSE35958 and GSE87466. This analysis aimed to pinpoint co-expression differential genes (DEGs) between OP and UC. Subsequently, the Metascape database facilitated the Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis of these DEGs' co-expression. For network construction and visualization, the STRING11.5 database along with Cytoscape 3.7.2 (Cytoscape Team, USA) were utilized to create a protein-protein interaction (PPI) network. Moreover, Cytoscape's cytoHubba plugin was instrumental in identifying the central genes, known as hub genes. In the datasets GSE35958 and GSE87466, 156 co-expressed DEGs were discovered. The PPI network, constructed using STRING11.5 and Cytoscape 3.7.2, comprises 96 nodes and 222 connections. Notably, seven hub genes were identified, namely COL6A1, COL6A2, BGN, NID1, PLAU, TGFB1, and PLAUR. These DEGs were predominantly enriched in pathways such as extracellular matrix organization and collagen-containing extracellular matrix, as per GO analysis. For diagnostic model construction and hub gene validation, datasets GSE56815 and GSE107499 from the GEO database were employed. The top five hub genes were validated. In conclusion, the hub genes identified in this study played a significant role in the early diagnosis, prevention, and treatment of OP and UC. Furthermore, they provide fresh insights into the underlying mechanisms of these diseases' development and progression.

Effects of blood pressure and antihypertensive drugs on osteoarthritis: a mendelian randomized study.

BACKGROUND: Previous studies have suggested that antihypertensive drugs may play a role in the treatment of osteoarthritis, but these studies may be limited by confounding factors and lead to biased results. Therefore, we conducted a Mendelian randomization study to investigate the effects of blood pressure and antihypertensive drugs on osteoarthritis. METHODS: We used published large-scale genome-wide association data and applied univariate and multivariate Mendelian randomization methods. The main analysis model was inverse variance weighting, and the reliability of the results was tested using MR-Egger intercept analysis, Cochran's Q test, and leave-one-out analysis. We comprehensively evaluated the relationship between systolic blood pressure, diastolic blood pressure, 12 antihypertensive drugs, and osteoarthritis. We also conducted verification in the independent queue of UK Biobank and built a simple linear regression model to obtain an independent comparison. RESULTS: We found no evidence that systolic and diastolic blood pressure significantly affected osteoarthritis. However, among antihypertensive drugs, we observed a significant positive correlation between potassium-preserving diuretics and aldosterone antagonists and all osteoarthritis (OR: 0.560, 95% CI 0.406-0.772, P = 0.0004). Sensitivity analysis showed no horizontal pleiotropy or heterogeneity, and the leave-one-out analysis demonstrated the reliability of the results. This result was replicated with nominally statistical significance in the validation cohort and exhibited significant correlation in the linear regression analysis. CONCLUSIONS: Our study suggested that controlling the protein targets of potassium-sparing diuretics and aldosterone antagonists may have beneficial results for osteoarthritis. These findings provide valuable medication strategies for the control of hypertension in patients with osteoarthritis.

Directed evolution rice genes with randomly multiplexed sgRNAs assembly of base editors.

CRISPR-based directed evolution is an effective breeding biotechnology to improve agronomic traits in plants. However, its gene diversification is still limited using individual single guide RNA. We described here a multiplexed orthogonal base editor (MoBE), and a randomly multiplexed sgRNAs assembly strategy to maximize gene diversification. MoBE could induce efficiently orthogonal ABE (<36.6%), CBE (<36.0%), and A&CBE (<37.6%) on different targets, while the sgRNA assembling strategy randomized base editing events on various targets. With respective 130 and 84 targets from each strand of the 34th exon of rice acetyl-coenzyme A carboxylase (OsACC), we observed the target-scaffold combination types up to 27 294 in randomly dual and randomly triple sgRNA libraries. We further performed directed evolution of OsACC using MoBE and randomly dual sgRNA libraries in rice, and obtained single or linked mutations of stronger herbicide resistance. These strategies are useful for in situ directed evolution of functional genes and may accelerate trait improvement in rice.

Engineering of Siloxanes for Stabilizing Silicon Anode Materials.

Silicon (Si) is considered the most promising anode material for the next generation of lithium-ion batteries (LIBs) because of its high theoretical specific capacity and abundant reserves. However, the volume expansion of silicon in the cycling process causes the destruction of the electrode structure and irreversible capacity loss. As a result, the commercial application of silicon materials is greatly hindered. In recent years, siloxane-based organosilicon materials have been widely used in silicon anode of LIBs because of their unique structure and physical and chemical properties, and have shown excellent electrochemical properties. The comprehensive achievement of siloxanes in silicon-based LIBs can be understood better through a systematic summary, which is necessary to guide the design of electrodes and achieve better electrochemical performance. This paper systematically introduces the unique advantages of siloxane materials in electrode, surface/interface modification, binder, and electrolyte. The challenges and future directions for siloxane materials are presented to enhance their performance and expand their application in silicon-based LIBs.

Oxygen-Induced Barrier Lowering for High-Performance Organic Field-Effect Transistors.

Organic field-effect transistors (OFETs) have the advantages of low-cost, large-area processing and could be utilized in a variety of emerging applications. However, the generally large contact resistance (Rc) limits the integration and miniaturization of OFETs. The Rc is difficult to reduce due to an incompatibility between obtaining strong orbit coupling and the barrier height reduction. In this study, we developed an oxygen-induced barrier lowering strategy by introducing oxygen (O2) into the nanointerface between the electrodes and organic semiconductors layer and achieved an ultralow channel width-normalized Rc (Rc·W) of 89.8 Ω·cm and a high mobility of 11.32 cm2 V-1 s-1. This work demonstrates that O2 adsorbed at the nanointerface of metal-semiconductor contact can significantly reduce the Rc from both experiments and theoretical simulations and provides guidance for the construction of high-performance OFETs, which is conducive to the integration and miniaturization of OFETs.

Inhabiting Inactive Transition by Coupling Function of Oxygen Vacancies and Fe─C Bonds achieving Long Cycle Life of an Iron-Based Anode.

Fe-based battery-type anode materials with many faradaic reaction sites have higher capacities than carbon-based double-layer-type materials and can be used to develop aqueous supercapacitors with high energy density. However, as an insurmountable bottleneck, the severe capacity fading and poor cyclability derived from the inactive transition hinder their commercial application in asymmetric supercapacitors (ASCs). In this work, driven by the "oxygen pumping" mechanism, oxygen-vacancy-rich Fe@Fe3 O4 (v) @Fe3 C@C nanoparticles that consist of a unique "fruit with stone"-like structure are developed, and they exhibit enhanced specific capacity and fast charge/discharge capability. Experimental and theoretical results demonstrate that the capacity attenuation in conventional iron-based anodes is greatly alleviated in the the Fe@Fe3 O4 (v) @Fe3 C@C anode because the irreversible phase transition to the inactive γ-Fe2 O3 phase can be inhibited by a robust barrier formed by the coupling of oxygen vacancies and Fe─C bonds, which promotes cycle stability (93.5% capacity retention after 24 000 cycles). An ASC fabricated using this Fe-based anode is also observed to have extraordinary durability, achieving capacity retention of 96.4% after 38 000 cycles, and a high energy density of 127.6 W h kg-1 at a power density of 981 W kg-1 .

General Spatial Confinement Recrystallization Method for Rapid Preparation of Thickness-Controllable and Uniform Organic Semiconductor Single Crystals.

Organic semiconductor single crystals (OSSCs) are ideal materials for studying the intrinsic properties of organic semiconductors (OSCs) and constructing high-performance organic field-effect transistors (OFETs). However, there is no general method to rapidly prepare thickness-controllable and uniform single crystals for various OSCs. Here, inspired by the recrystallization (a spontaneous morphological instability phenomenon) of polycrystalline films, a spatial confinement recrystallization (SCR) method is developed to rapidly (even at several second timescales) grow thickness-controllable and uniform OSSCs in a well-controlled way by applying longitudinal pressure to tailor the growth direction of grains in OSCs polycrystalline films. The relationship between growth parameters including the growth time, temperature, longitudinal pressure, and thickness is comprehensively investigated. Remarkably, this method is applicable for various OSCs including insoluble and soluble small molecules and polymers, and can realize the high-quality crystal array growth. The corresponding 50 dinaphtho[2,3-b:2″,3″-f]thieno[3,2-b]thiophene (DNTT) single crystals coplanar OFETs prepared by the same batch have the mobility of 4.1 ± 0.4 cm2 V-1 s-1 , showing excellent uniformity. The overall performance of the method is superior to the reported methods in term of growth rate, generality, thickness controllability, and uniformity, indicating its broad application prospects in organic electronic and optoelectronic devices.