ABSTRACT
A universal approach for on-demand development of monolithic metal oxide composite bulk materials with air-like densities (<5 mg/cm(3)) is reported. The materials are fabricated by atomic layer deposition of titania (TiO2) or zinc oxide (ZnO) using the nanoscale architecture of 1 mg/cm(3) SiO2 aerogels formed by self-organization as a blueprint. This approach provides deterministic control over density and composition without affecting the nanoscale architecture of the composite material that is otherwise very difficult to achieve. We found that these materials provide laser-to-X-ray conversion efficiencies of up to 5.3%, which is the highest conversion efficiency yet obtained from any foam-based target, thus opening the door to a new generation of highly efficient laser-induced nanosecond scale multi-keV X-ray sources.
ABSTRACT
Novel carbon composites are fabricated through catalyzed CVD growth of carbon nanotubes directly on the inner surfaces of monolithic carbon aerogel (CA) substrates. Uniform CNT yield is obtained throughout the internal pore volume of CA monoliths with macroscopic dimensions. These composites possess large surface areas (>1000 m(2) g(-1)) and exhibit enhanced electrical conductivity following CNT growth.
ABSTRACT
Using atomic layer deposition (ALD), we show that Pt nanoparticles can be deposited on the inner surfaces of carbon aerogels (CA). The resultant Pt-loaded materials exhibit high catalytic activity for the oxidation of CO even at loading levels as low as approximately 0.05 mg Pt/cm2. We observe a conversion efficiency of nearly 100% in the 150-250 degrees C temperatures range, and the total conversion rate seems to be limited only by the thermal stability of the CA support in ambient oxygen. The ALD approach described here is universal in nature, and can be applied to the design of new catalytic materials for a variety of applications, including fuel cells, hydrogen storage, pollution control, green chemistry, and liquid fuel production.
