Environmental Influences on the Behavioural and Emotional Outcomes of Children: A Network Analysis.

BACKGROUND: Intellectual developmental disorders are a serious source of health morbidity with negative consequences for adults as well as children. However, there is limited evidence on the environmental, trace element, behavioural, and emotional outcomes in children. Here, we investigated whether there is any association between child behaviour and emotional outcomes and micronutrients using network analysis. METHODS: A cross-sectional study was conducted in 9-year-old children within a Pacific Island Families study birth cohort. Elemental concentration was determined in children's toenails after acid digestion and analysed using inductively coupled plasma mass spectrometry. We used network analysis to identify closely associated trace elements and tested the directions and strength of these trace elements. MANCOVA were used to identify the significant associations between individual elements and the behavioural/emotional function of the children using the children behaviour checklist (CBCL). At the final step, quantile regression analysis was used to assess and quantify the identified associations between CBCL function scores and manganese, adjusted by sex, ethnicity, and standardized BMI. RESULTS: Three major nutrient networks were identified. In the Mn network, Mn was strongly positively associated with Al (0.63) and Fe (r = 0.65) and moderately associated with Pb (r = 0.45) and Sb (r = 0.42). Al was also strongly associated with Fe (r = 0.9). Children in the second or third clinical group, with an elevated externalized CBCL score, had a much higher mean and median level of Mn as compared to the normal range group. The aggression score was significantly associated with Mn concentration and sex. Higher Mn concentrations were associated with a higher aggression score. A 1 ug/g unit increase in Mn was associated with a 2.44-fold increase (95% confidence interval: 1.55-4.21) in aggression score, and boys had higher median aggression score than girls (difference: 1.7, 95% CI: 0.9-2.8). Attention and rule breaking scores were both significantly associated with Mn concentration. Higher Mn concentrations were associated with higher attention behaviour problem and rule breaking scores. A 1 ug/g unit increase in Mn was found to be associated with a 1.80-fold increase (95% confidence interval: 1.37-2.82) in attention score, and a 1.46-fold increase (95% confidence interval: 1.01-1.74) in the rule breaking score. Thought score was not significantly associated with Mn concentration (p = 0.13) but was significantly lower in boys (p = 0.004). CONCLUSIONS: Exceeding Mn levels is potentially toxic and has been identified to be associated with worse externalized children's behavioural health and emotional well-being. Future studies are necessary to find the exposure paths so that advice shall be provided to family and care providers in public health and environmental protection.

Investigation of the uptake of molybdenum by plants from Argentinean groundwater.

Some regions of Argentina are affected by high concentrations of molybdenum, arsenic and vanadium from natural sources in their groundwater. In particular, Mo levels in groundwater from Eduardo Castex (La Pampa, Argentina) typically exceed the guidelines for drinking water formerly established by WHO at 70 µg/L. Therefore, this study investigated the uptake of Mo in plants, using cress (Lepidium sativum L.) as a model using hydroponic experiments with synthetic solutions and groundwater from La Pampa. Cress grown from control experiments (150 µg/L Mo, pH 7) presented an average Mo concentration of 35.2 mg/kg (dry weight, d.w.), higher than the typical total plant range (0.7-2.5 mg/kg d.w.) in the literature. Using pooled groundwater samples (65.0-92.5 µg/L Mo) from wells of La Pampa (Argentina) as growth solutions resulted in significantly lower cress Mo levels (1.89-4.59 mg/kg d.w.) than were obtained for synthetic solutions of equivalent Mo concentration. This may be due to the high levels in these groundwater samples of As, V, Fe and Mn which are known to be associated with volcanic deposits. This research addressed the hitherto scarcity of data about the effect of various physicochemical parameters on the uptake of Mo in plants.

Use of human teardrop fluid for the determination of trace elements in healthy individuals and diabetic patients.

BACKGROUND: The use of unconventional biological materials in human trace element studies has increased in terms of published research studies. The aim of present study was to develop and validate the use of teardrop fluid for determining trace element levels in the human body. No study has been published in this area yet. This is a new non-invasive approach in the possible early diagnosis of the pathogenesis of type 2 diabetes. MATERIALS AND METHODS: Human teardrop fluid samples were obtained from Karbala (Iraq) (n = 111) healthy individuals and with type 2 diabetes (n = 44); and London (UK) healthy individuals (n = 18). The levels of V, Cr, Mn, Fe, Cu, Zn, As, Sr and Cd were determined using an inductively coupled plasma mass equipped with collision cell technology for polyatomic ion correction (ICP-MS). STATISTICAL ANALYSIS: Discriminate function analysis (DFA) was carried out to determine the set of variables that discriminated between the trace elements in teardrop fluid samples from healthy individuals and diabetic patients. RESULTS: The trace element levels of human teardrop fluid are similar for many elements to that reported for human blood serum in the literature. This is interesting since they have different physiological functions, although overall they are mainly water containing electrolytes (∼ 90 %) and solids (antibodies, hormones, etc). In general, for the study groups in Karbala, Iraq, significantly higher teardrop fluid levels of Mn and Sr were found in type 2 diabetic patients when compared with healthy individuals (evaluated using an F-test and a two-tailed t-test). The levels of V, Cu and As were found to be significantly higher (P < 0.05) in healthy individuals than type 2 diabetic patients. Although the levels of Fe and Zn were slightly higher in type 2 diabetic patients than healthy cases, the differences were not statistically significant (P > 0.05). Cr and Cd were found to have similar levels for both study groups. Significantly higher teardrop fluid levels of V, Cr, Mn, Fe, Zn, As and Sr were found in healthy individuals from Karbala (Iraq) when compared with those from London (UK). In contrast, the levels of Cd observed to be significantly higher in London (UK) than Karbala. No statistical difference was found for Cu between the two healthy groups. STATISTICAL ANALYSIS: Discriminate analysis showed that human teardrop fluid V, Mn, Zn, As, Sr and Cd levels could be used to discriminate between healthy and type 2 diabetes study groups in Karbala, Iraq (83 % of cases correctly classified). CONCLUSION: The use of human teardrop fluid for determining the trace element levels of human health conditions has been evaluated. Trace elemental levels are like that for blood serum which is widely used as an invasive method for assessing human health conditions. Sample collection for teardrop fluid is non-invasive and the application has potential for determining the trace element levels in healthy individuals and disorder conditions (like type 2 diabetes) in countries where cultural and gender sensitivity are issues with respect to the collection methods used for other body fluid samples.

Chemical Composition and Bioactive Properties of Commercial and Non-Commercial Purple and White Açaí Berries.

Chemical composition analysis of açaí extracts revealed higher levels of total polyphenol content in purple açaí samples for both commercial (4.3-44.7 gallic acid equivalents mg/g) and non-commercial samples (30.2-42.0 mg/g) compared to white (8.2-11.9 mg/g) and oil samples (0.8-4.6 mg/g). The major anthocyanin compounds found in purple açaí samples were cyanidin-3-glucoside and cyanidin-3-rutinoside with total concentrations in the range of 3.6-14.3 cyanidin-3-glucoside equivalents mg/g. The oligomeric proanthocyanidins were quantified in the range of 1.5-6.1 procyanidin B1 equivalents mg/g. Moreover, açaí presented significant levels of calcium, magnesium, manganese, iron, zinc and copper, essential minor and trace elements, in comparison with other berries. All of the açaí extracts at 50 µg/mL potently inhibited the release of reactive oxygen species in lipopolysaccharide-stimulated RAW 264.7 murine macrophage cells, but none inhibited the release of nitric oxide. Furthermore, all the açaí samples demonstrated potential as wound healing agents due to the high levels of migration activity in human fibroblast cells.

Phenolic content, anti-inflammatory properties, and dermal wound repair properties of industrially processed and non-processed acai from the Brazilian Amazon.

Acai fruit is recognized for its health promoting properties. However, there is still a need to address the effects of industrial processing on this fruit. In this study, phenolic content, anti-inflammatory properties and dermal wound repair properties of 20 acai samples, before and after industrial processing, from various Amazon regions were investigated. Acai pulp was rich in total phenolics (18.9-58.8 mg g-1) and proanthocyanins (9.8-43.1 mg g-1), but contained trace anthocyanins (up to 0.1 mg g-1). Industrially processed samples lost substantial amounts of proanthocyanidins (up to 83.2%), while the anthocyanins inherently present were greatly enriched after processing (20-fold higher). Non-processed acai pulp extracts protected against early inflammation response which was correlated with proanthocyanidins, by significantly inhibiting nitric oxide production and suppressing pro-inflammatory gene expression including interleukin-1ß, cyclooxygenase-2, nitric oxide synthase, and interleukin-6. The promotion of dermal wound repair of acai seed and pulp extracts was mainly contributed by anthocyanins and other bioactive compounds. The anti-inflammatory effect was diminished but wound healing effect was retained after pulp processing, suggesting the processing technology needs to be improved to maintain biological properties of acai fruit.

Household Smoking Status and Heavy Metal Concentrations in Toenails of Children.

There is limited evidence on the distribution of heavy metals and its association with secondhand smoking (SHS) within Pacific Island children living in New Zealand. Certain heavy metals such as cadmium (Cd), lead (Pb), and aluminum (Al) bioaccumulates in the body and can deteriorate health in both children and adults. Others, such as chromium (Cr) and nickel (Ni) in trace amounts are necessary but become toxic at high levels. Exposure routes of these elements include food, water, and air. The purpose of this study was to identify the distribution of toxic metal concentrations and its possible correlation with SHS within the Pacific Island children. A sub-sample of children within Pacific Island families longitudinal study, at the nine-year phase, who were living in the New Zealand city of Auckland were invited to participate, (n = 278). Toenails were used as a biomarker to determine Cr, Pb, Cd, Cu, Ni, and Al concentration using inductively coupled plasma mass spectrometry. Reliable and validated questionnaires were used for demographics, lifestyle, and health outcome variables. Significant differences between household smoking status and ethnicity, as well as parents' marital status, were observed (p < 0.05). There was no statistical difference in heavy metal concentrations in smoking versus non-smoking households. However, Cr, Pb, Cd, Cu, and Ni concentrations were all higher than the required optimal health value in both groups. A high concentration of heavy metals was observed in these children that exceeded the value required for optimal health, although no significant difference in heavy metals with regards to secondhand smoking was observed. SHS was associated with children's ethnicity and parental marital status, but not with household income levels or maternal education.

Status and interrelationship of toenail elements in Pacific children.

OBJECTIVE: Elemental deficiencies or in excess effects growth and development. Pacific population are at a disadvantage due to food insecurity as compared to New Zealand European households. This study aims to evaluate the status and interrelationship of elements (essential, non-essential and toxic) in nine-year-old Pacific children who were part of the Pacific Island Families Study living in New Zealand. MATERIALS AND METHODS: This observational study included 278 eligible nine-year-old children. Essential elements (including calcium, chromium, cobalt, copper, iodine, iron, magnesium, manganese, selenium, zinc, molybdenum), non-essential and toxic elements (arsenic, aluminum, antimony, boron, cadmium, lead, mercury, nickel,) were determined in toenails and after acid digestion, analysed using inductively coupled plasma mass spectrometry. Principal component analysis and multivariate analysis of covariance was used to identify differences in the groups of elements and the inter-correlations between elements. RESULTS: The mean calcium (868µg/g Ca), selenium (0.35µg/g Se) and zinc (129µg/g Zn) concentrations were lower while the mean cadmium (0.21µg/g Cd) lead (0.86µg/g Pb) and mercury (0.72µg/g Hg) concentrations were higher than the optimal health requirements. Ethnic differences in relation to toenail elemental concentrations were observed for aluminium and iron. Gender differences were observed for aluminium, antimony, arsenic and lead. Selenium and molybdenum were inversely associated with mercury. Manganese, zinc and calcium were positively associated. CONCLUSIONS: This research contributes to the understanding of the elemental concentrations for Pacific children by using tissue samples from toenails, which improves the completeness of sampling than other tissues and provides a longer exposure time frame. The study also reports several inter-correlations between essential, non-essential and toxic elements in Pacific Island population.

Effect of food preparation using naturally-contaminated groundwater from La Pampa, Argentina: Estimation of elemental dietary intake from rice and drinking water.

Water from La Pampa, Argentina, was used for washing and cooking rice to examine the in-situ impact of using naturally-contaminated water for food preparation on the elemental dietary intake. Whilst washing with the control tap water (28 µg/L As) reduced the concentration of As in rice by 23%, the use of different well waters (281-1144 µg/L) increased As levels significantly (48-227%) in comparison with the original concentration in the rice (0.056 µg/g). Cooking the rice at a low water-to-rice ratio (2:1) using modern methods increased the levels of As in the cooked samples by 2-3 orders of magnitude for both pre-washed and un-washed rice. Similar trends were observed for vanadium. Although the levels of manganese, iron, copper, zinc and molybdenum in rice were reduced during washing and cooking for most water samples, the molybdenum concentration in the cooked rice doubled (2.2-2.9 µg/g) when using water containing >1 mg/L Mo.

Domain specific effects of postnatal toenail methylmercury exposure on child behaviour.

OBJECTIVE: Very little is known about the relationship between postnatal methylmercury concentrations (via toenails as bioindicator) and behavioural characteristics of Pacific Island children living in New Zealand. The aim of this study was to explore the association between total mercury exposure and different domains of behavioural problems in Pacific children. MATERIALS AND METHODS: A sample of nine-year-old Pacific Island children resident in Auckland, New Zealand participated in this study. Total mercury was determined in biological samples (toenail clippings) on behavioural problems as identified by mothers (using the child behaviour checklist). Specific behavioural domains, particularly aggression, rule breaking, attention and social problems were studied in relation to mercury exposure using toenails. The determination of mercury concentration in toenail clippings, after acid digestion was carried out using inductively coupled plasma mass spectrometry. RESULTS: The observational study was conducted between July 2010 and July 2011 in which 278 eligible nine-year-old Pacific Island children were enrolled (Girls n=58%; boys n=42%). FINDINGS: showed that 21% of the children had total toenail mercury concentrations (1.5µg/g to 6µg/g) higher than the United State Environmental Protection Agency recommended levels (RfD; 1µg/g Hg) for optimal health in children. Aggressive behaviour was associated with total toenail mercury exposure after adjusting for gender, ethnicity and income levels (OR: 2.15 95% CI 1.45, 3.18 p-value <0.05; OR 1.38 95% CI 0.83, 1.2 p value <0.05, respectively). CONCLUSIONS: Overall, this research contributes to the understanding of total toenail mercury concentrations for Pacific people in New Zealand using toenail clippings as biomarkers in terms of associations with child behavioural problems. Mercury in toenails demonstrated a moderate association with a specific behavioural domain - aggressive behaviour.

A new quantitative method for gunshot residue analysis by ion beam analysis.

Imaging and analyzing gunshot residue (GSR) particles using the scanning electron microscope equipped with an energy dispersive X-ray spectrometer (SEM-EDS) is a standard technique that can provide important forensic evidence, but the discrimination power of this technique is limited due to low sensitivity to trace elements and difficulties in obtaining quantitative results from small particles. A new, faster method using a scanning proton microbeam and Particle Induced X-ray Emission (µ-PIXE), together with Elastic Backscattering Spectrometry (EBS) is presented for the non-destructive, quantitative analysis of the elemental composition of single GSR particles. In this study, the GSR particles were all Pb, Ba, Sb. The precision of the method is assessed. The grouping behaviour of different makes of ammunition is determined using multivariate analysis. The protocol correctly groups the cartridges studied here, with a confidence >99%, irrespective of the firearm or population of particles selected.

Chemical changes exhibited by latent fingerprints after exposure to vacuum conditions.

The effect of vacuum exposure on latent fingerprint chemistry has been evaluated. Fingerprints were analysed using a quartz crystal microbalance to measure changes in mass, gas chromatography mass spectrometry to measure changes in lipid composition and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) to determine changes in the content of water, fatty acids and their esters after exposure to vacuum. The results are compared with samples aged under ambient conditions. It was found that fingerprints lose around 26% of their mass when exposed to vacuum conditions, equivalent to around 5 weeks ageing under ambient conditions. Further exposure to vacuum causes a significant reduction in the lipid composition of a fingerprint, in particular with the loss of tetradecanoic and pentadecanoic acid, that was not observed in ambient aged samples. There are therefore implications for sequence in which fingerprint development procedures (for example vacuum metal deposition) are carried out, as well as the use of vacuum based methods such as secondary ion mass spectrometry (SIMS) and matrix-assisted laser desorption ionisation (MALDI) in the study of fingerprint chemistry.

Arsenic speciation of geothermal waters in New Zealand.

Total arsenic and four arsenic species; arsenite (iAs(III)), arsenate (iAs(V)), dimethylarsinic acid (DMA(V)) and monomethylarsonic acid (MA(V)), are reported in 28 geothermal features from the Taupo Volcanic Zone (TVZ) and Waikato region of New Zealand. Samples were collected for arsenic speciation analysis via a solid phase extraction (SPE) kit allowing the separation, stabilisation and pre-concentration of the species at the time of sample collection in the field. This is the first research to present data for arsenic species collected by this technique in geothermal waters from New Zealand. Total arsenic concentrations, determined by inductively coupled plasma mass spectrometry (ICP-MS), ranged from 0.008 to 9.08 mg l⁻¹ As. The highest levels were discovered in three features in Tokaanu (Taumatapuhipuhi, Takarea #5 and #6), with arsenic concentrations of 8.59, 8.70 and 9.08 mg l⁻¹ As, respectively. Inorganic arsenic species were predominant in the geothermal waters, with arsenite contributing to more than 70% of the total arsenic in the majority of samples. Organic species were also determined in all samples, indicating the presence of microbial activity. A potential risk to human health was highlighted due to the high levels of arsenic, mainly as arsenite, in geothermal features linked to bathing pools. Further research is needed into dermal absorption as a potential route of arsenic exposure whilst bathing in these hot pools, as it may contribute to an occurrence of acute arsenic-related health problems.

Concentration of various trace elements in the rat retina and their distribution in different structures.

Inductively coupled plasma mass spectrometry (ICP-MS) was used to quantify the total amount of trace elements in retina from adult male Sprague-Dawley rats (n = 6). Concentration of trace elements within individual retinal areas in frozen sections of the fellow eye was established with the use of two methodologies: (1) particle-induced X-ray emission (PIXE) in combination with 3D depth profiling with Rutherford backscattering spectrometry (RBS) and (2) synchrotron X-ray fluorescence (SXRF) microscopy. The most abundant metal in the retina was zinc, followed by iron and copper. Nickel, manganese, chromium, cobalt, selenium and cadmium were present in very small amounts. The PIXE and SXRF analysis yielded a non-homogenous pattern distribution of metals in the retina. Relatively high levels of zinc were found in the inner part of the photoreceptor inner segments (RIS)/outer limiting membrane (OLM), inner nuclear layer and plexiform layers. Iron was found to accumulate in the retinal pigment epithelium/choroid layer and RIS/OLM. Copper in turn, was localised primarily in the RIS/OLM and plexiform layers. The trace elements iron, copper, and zinc exist in different amounts and locations in the rat retina.

Arsenic speciation and trace element analysis of the volcanic río Agrio and the geothermal waters of Copahue, Argentina.

Surface water originating from the Copahue volcano crater-lake was analysed for total arsenic and four arsenic species: arsenite (iAs(III)), arsenate (iAs(V)), monomethylarsonic acid (MA(V)) and dimethylarsinic acid (DMA(V)) and other trace elements (Fe, Mn, V, Cr, Ni, Zn). A novel in-field technique for the preconcentration and separation of four arsenic species was, for the first time, used for the analysis of geothermal and volcanic waters. Total arsenic levels along the río Agrio ranged from <0.2-3783 µg/l As(T). The highest arsenic levels were recorded in the el Vertedero spring (3783 µg/l As(T)) on the flank of the Copahue volcano, which feeds the acidic río Agrio. Arsenite (H(3)AsO(3)) predominated along the upper río Agrio (78.9-81.2% iAs(III)) but the species distribution changed at lago Caviahue and arsenate (H(2)AsO(4)(-)) became the main species (51.4-61.4% iAs(V)) up until Salto del Agrio. The change in arsenic species is potentially a result of an increase in redox potential and the formation of iron-based precipitates. Arsenic speciation showed a statistically significant correlation with redox potential (r=0.9697, P=0.01). Both total arsenic and arsenic speciation displayed a statistically significant correlation with vanadium levels along the river (r=0.9961, P=0.01 and r=0.8488, P=0.05, respectively). This study highlights that chemical speciation analysis of volcanic waters is important in providing ideas on potential chemical toxicity. Furthermore there is a need for further work evaluating how arsenic (and other trace elements), released in volcanic and geothermal streams/vents, impacts on both biota and humans (via exposure in thermal pools or consuming commercial drinking water).

Determination of the deposition order of overlapping latent fingerprints and inks using secondary ion mass spectrometry.

A new protocol using time-of-flight secondary ion mass spectrometry (ToF-SIMS) has been developed to identify the deposition order of a fingerprint overlapping an ink line on paper. By taking line scans of fragment ions characteristic of the ink molecules (m/z 358.2 and 372.2) where the fingerprint and ink overlap and by calculating the normalized standard deviation of the intensity variation across the line scan, it is possible to determine whether or not a fingerprint is above ink on a paper substrate. The protocol adopted works for a selection of fingerprints from four donors tested here and for a fingerprint that was aged for six months; for one donor, the very faint fingerprints could not be visualized using either standard procedures (ninhydrin development) or SIMS, and therefore the protocol correctly gives an inconclusive result.

Monitoring of heavy metal levels in roadside dusts of Thessaloniki, Greece in relation to motor vehicle traffic density and flow.

In recent years, the level of heavy metal pollution in urban areas has been of considerable concern. The principal source has been attributed to the motor vehicle and increasing inner city congestion, which has lead to a change and enlargement of transport stop-start zones. These areas of high traffic density are associated with an increased release of heavy metals into the adjacent residential or commercial areas. Seventy-five roadside dust samples were collected throughout the inner city and by-pass motorway areas of Thessaloniki, Northern Greece. Samples were taken from arterial, major and minor roads, as well as the ring road, to compare and contrast the levels of heavy metals, namely Cu, Zn, Cd, Mn and Pb. Flame Atomic Absorption Spectroscopy (FAAS) was developed to quantitatively determine concentrations of both total element and geochemical fractionation, within the two dust particulate fraction sizes <75 microm and 75-125 microm. Acid digestion using Aqua Regia (3:1 conc. HCl:HNO(3)) was employed for the total elemental analysis, a method that was validated through the use of certified reference materials (CRM). Fractionation studies involved a three-step sequential extraction method performed on five selected samples (representatives of high, mid and low total elemental concentrations). The resultant solutions were analysed for lead and zinc levels to ascertain fractionation throughout the different geochemical fractions, thus assessing bioavailability.It was found that congestion/stop-start traffic patterns did influence and have led to increased levels of heavy metal deposition along inner city roads compared to levels observed on the new relief ring road. Dust particulate fraction sizes were only found to show statistically significant differences in cadmium and manganese, at the probability P < 0.001 or 99.9% confidence limit. Both Cd and Mn showed higher total levels in the smaller fraction sizes (<75 microm), implying that their major release source is exhaust emissions. There were no significant differences in the other elements, at the P > 0.05 or 95% confidence limit. Road type was seen to have little affect on cadmium and manganese, though lead, copper and zinc were all found to show higher levels on the inner city routes. This can be related back to the wear-and-tear of vehicle components as a result of the stop-start traffic patterns (brake pads etc). Both Pb and Zn have shown to be in chemical forms that are bio available to ecosystems.

Platinum emissions and levels in motorway dust samples: influence of traffic characteristics.

An increase in the environmental levels of platinum can in part be attributed to the introduction of motor vehicle catalytic converters. Reported platinum levels in roadside dust samples range from 0.6 ng/g to 62.8+/-10.5 microg/g (dry weight, d.w.), with the highest levels in samples taken from inside road tunnels. Carriageway dust samples were collected from nine junctions (at sites of rush hour 'stop-start' activity or slip road on/off sections) of the London Orbital (M25) motorway and analysed for total Pt by inductively coupled plasma mass spectrometry (ICP-MS). These motorway junctions have mean daily traffic densities of 85,000 to 145,000 vehicles. Dust samples were fractionated (<75, 75-125 and 125-250 microm), microwave acid digested (aqua rega/HF) and analysed using (195)Pt(+) with polyatomic ion correction of (179)Hf(16)O(+). Quality control validation was performed with replicate analysis of two certified reference materials, namely, NIST 2556 (Used Autocatalyst-Pellet) and 2557 (Used Autocatalyst-Monolith). Total platinum levels (sum total of all particle fractions) ranged from 101.6 to 764.2 ng/g (dry weight) in dust samples from all sampling sites. The highest Pt levels occur in the <75 and 75-125 microm particle fractions, with the fractionated samples ranging from 4.6 to 356.2 ng/g Pt (dry weight). Statistical analysis (Student t-test) confirmed that the significantly higher Pt levels (at the 95% confidence interval) occurred in dust samples taken from carriageway sites that had the vehicle slowing/stop-start driving conditions rather than for the accelerating speed zones. Correlation analysis showed that dust Pt levels, irrespective of fraction particle size, did not directly relate to traffic density, which is contrary to other published studies. The highest Pt levels occurred at the M25/A3 (Portsmouth/Guildford to London highway) intersection suggesting that traffic flow conditions, such as erratic stop-start flows, have a greater influence on Pt particle release and accumulation in the adjacent motorway environment than traffic density.

Chemical (polycyclic aromatic hydrocarbon and heavy metal) levels in contaminated stormwater and sediments from a motorway dry detention pond drainage system.

Chemical (polycyclic aromatic hydrocarbon - PAH and heavy metal) levels in stormwater and sediment samples collected from the London Orbital (M25) motorway drainage dry detention pond at Oxted, Surrey, UK were determined. Such chemicals are derived from vehicular combustion products and the wear and tear materials deposited onto the motorway surface. Gas chromatography-mass spectrometry (GC-MS) was used for the qualitative and quantitative determination of 16 USEPA priority PAHs in motorway drainage sediments. The GC-MS method, incorporating a solid phase extraction step, provides detection limits ranging from 0.17 to 0.41 mg kg(-1)(dry weight). Almost all of the 16 USEPA listed PAHs were detected. Phenanthrene, fluoranthene, pyrene, benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(a)pyrene and benzo(g,h,i)perylene (PAH numbers 5, 7, 8, 9, 10, 11, 13 and 16) were among the PAHs found at "higher" levels (ranging from 0.3-10.2 mg kg(-1), dry weight) in the sediment samples. PAH levels show little change along the motorway drainage silt trap (facility for reducing the levels of suspended particulate matter in the stormwater). PAH concentrations are considerably higher in the dry detention pond outflow interceptor. Statistical analysis showed that significant correlation coefficients (based on a t-test at the 95% confidence interval) were obtained between those PAHs found at high concentrations over all of the sampling sites. Several PAHs were dispersed beyond the treatment facility and accumulation in the sediment of the deer park resulted in levels ranging from 0.3-1.6 mg kg(-1), dry weight. These PAHs found beyond the treatment facility (in the local farm deer park) may contribute a serious health threat to farm animals or even fish in the aquatic environment. Heavy metal levels (V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd, Sb and Pb) of the drainage stormwater and sediments were determined by inductively coupled plasma mass spectrometry (ICP-MS), with quality control evaluation using two certified reference materials. Typical detection limits were found to be below 0.1 [micro sign]g l(-1) for stormwater and 0.005 mg kg(-1) for acid digested sediments. Raised heavy metal levels were found throughout the dry detention pond facility and only decrease when the stormwater is diluted following discharge into the river Eden. Statistical analysis also confirms that some significant correlations exist between various heavy metals and PAHs. However, no overall conclusive trend is found indicating that a particular PAH is deposited in sediment relative to a specific heavy metal/s. These results raise some serious concerns about the dispersion and accumulation of chemicals in the sediments of motorway stormwater drainage systems and the need for maintenance and clean-up of contaminated material from such systems.