ABSTRACT
A METland is an innovative treatment wetland (TW) that relies on the stimulation of electroactive bacteria (EAB) to enhance the degradation of pollutants. The METland is designed in a short-circuit mode (in the absence of an external circuit) using an electroconductive bed capable of accepting electrons from the microbial metabolism of pollutants. Although METlands are proven to be highly efficient in removing organic pollutants, the study of in situ EAB activity in full-scale systems is a challenge due to the absence of a two-electrode configuration. For the first time, four independent full-scale METland systems were tested for the removal of organic pollutants and nutrients, establishing a correlation with the electroactive response generated by the presence of EAB. The removal efficiency of the systems was enhanced by plants and mixed oxic-anoxic conditions, with an average removal of 56 g of chemical oxygen demand (COD) mbed material -3 day-1 and 2 g of total nitrogen (TN) mbed material -3 day-1 for Ørby 2 (partially saturated system). The estimated electron current density (J) provides evidence of the presence of EAB and its relationship with the removal of organic matter. The tested METland systems reached the max. values of 188.14 mA m-2 (planted system; IMDEA 1), 223.84 mA m-2 (non-planted system; IMDEA 2), 125.96 mA m-2 (full saturated system; Ørby 1), and 123.01 mA m-2 (partially saturated system; Ørby 2). These electron flow values were remarkable for systems that were not designed for energy harvesting and unequivocally show how electrons circulate even in the absence of a two-electrode system. The relation between organic load rate (OLR) at the inlet and coulombic efficiency (CE; %) showed a decreasing trend, with values ranging from 8.8 to 53% (OLR from 2.0 to 16.4 g COD m-2 day-1) for IMDEA systems and from 0.8 to 2.5% (OLR from 41.9 to 45.6 g COD m-2 day-1) for Ørby systems. This pattern denotes that the treatment of complex mixtures such as real wastewater with high and variable OLR should not necessarily result in high CE values. METland technology was validated as an innovative and efficient solution for treating wastewater for decentralized locations.
ABSTRACT
Monitoring in situ microbial activity in anoxic submerged soils and aquatic sediments can be labor intensive and technically difficult, especially in dynamic environments in which a record of changes in microbial activity over time is desired. Microbial fuel cell concepts have previously been adapted to detect changes in the availability of relatively high concentrations of organic compounds in waste water but, in most soils and sediments, rates of microbial activity are not linked to the concentrations of labile substrates, but rather to the turnover rates of the substrate pools with steady state concentrations in the nM-µM range. In order to determine whether levels of current produced at a graphite anode would correspond to the rates of microbial metabolism in anoxic sediments, small graphite anodes were inserted in sediment cores and connected to graphite brush cathodes in the overlying water. Currents produced were compared with the rates of [2-(14)C]-acetate metabolism. There was a direct correlation between current production and the rate that [2-(14)C]-acetate was metabolized to (14)CO2 and (14)CH4 in sediments in which Fe(III) reduction, sulfate reduction, or methane production was the predominant terminal electron-accepting process. At comparable acetate turnover rates, currents were higher in the sediments in which sulfate-reduction or Fe(III) reduction predominated than in methanogenic sediments. This was attributed to reduced products (Fe(II), sulfide) produced at distance from the anode contributing to current production in addition to the current that was produced from microbial oxidation of organic substrates with electron transfer to the anode surface in all three sediment types. The results demonstrate that inexpensive graphite electrodes may provide a simple strategy for real-time monitoring of microbial activity in a diversity of anoxic soils and sediments.
ABSTRACT
BACKGROUND: Clostridium phytofermentans, an anaerobic soil bacterium, can directly convert plant biomass into biofuels. The genome of C. phytofermentans contains three loci with genes encoding shell proteins of bacterial microcompartments (BMC), organelles composed entirely of proteins. METHODOLOGY AND PRINCIPAL FINDINGS: One of the BMC loci has homology to a BMC-encoding locus implicated in the conversion of fucose to propanol and propionate in a human gut commensal, Roseburia inulinivorans. We hypothesized that it had a similar role in C. phytofermentans. When C. phytofermentans was grown on fucose, the major products identified were ethanol, propanol and propionate. Transmission electron microscopy of fucose- and rhamnose-grown cultures revealed polyhedral structures, presumably BMCs. Microarray analysis indicated that during growth on fucose, operons coding for the BMC locus, fucose dissimilatory enzymes, and an ATP-binding cassette transporter became the dominant transcripts. These data are consistent with fucose fermentation producing a 1,2-propanediol intermediate that is further metabolized in the microcompartment encoded in the BMC locus. Growth on another deoxyhexose sugar, rhamnose, resulted in the expression of the same BMC locus and similar fermentation products. However, a different set of dissimilatory enzymes and transport system genes were induced. Quite surprisingly, growth on fucose or rhamnose also led to the expression of a diverse array of complex plant polysaccharide-degrading enzymes. CONCLUSIONS/SIGNIFICANCE: Based on physiological, genomic, and microarray analyses, we propose a model for the fermentation of fucose and rhamnose in C. phytofermentans that includes enzymes encoded in the same BMC locus. Comparative genomic analysis suggests that this BMC may be present in other clostridial species.
