ABSTRACT
A 253 J with 26â ns at 0.2â Hz laser performance was demonstrated using a LD pumped cryogenically cooled Yb:YAG ceramics laser amplifier. A high energy storage of 344 J was achieved with a stored energy density of 0.58 J/cm3 using a 1 kJ output multidirectional-pumping system. High energy-extraction efficiency of 56.5% was achieved with high energy fluence of 4.63 J /cm2. To the best of our knowledge, this is the highest output energy obtained with a repetitive nanosecond pulse by LD pumped solid-state laser. This paper presented a design of 1 kJ amplifier based on experimentally proven numerical data.
ABSTRACT
A uniformly imploded deuterated polystyrene (CD) shell target is fast-heated by a Petawatt (PW) laser without cone guide. The best illumination timing is found to be in a narrow region around 80+/-20 picoseconds from the onset of the stagnation phase, where thermal neutrons are enhanced four to five times by the PW laser of energy less than 10% of the implosion laser. The timing agrees with the timings of enhancement of the x-ray emission from the core and reduction of the bremsstrahlung radiation from scattered hot electrons. The PW laser, focused to the critical density point, generates the energetic electrons within as narrow an angle as 30 degrees , which then heats the imploded CD shell to enhance thermal neutrons. These results first demonstrate that the PW laser directly heats the imploded core without any conelike laser guide.
